文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3961至3972个,产品总数4,488个

切换升序
Cu
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

A Cu-based electronically conducting metal–organic framework with π–d conjugation for cathode and anode modification in aqueous zinc-ion batteries

Chuntao Yang,Kaiyong Feng,Jiangchang Chen,Ze Liu,Yingjian Yu

The commercial applications of aqueous rechargeable zinc-ion batteries (ZIBs) remain limited mainly owing to the low capacity storage efficiency and structural deformation of cathode materials, coupled with anode dendrite formation and side reactions that compromise battery performance. Herein, the electronically conductive metal-organic framework (EC-MOF) DDA-Cu was developed and used as the cathode for the first time in ZIBs. The electrode material showed an excellent initial discharge capacity of 249.6 mAh g −1 at 0.2 A g −1 . Notably, it also reached a effective capacity of 120 mAh g −1 after 175 cycles at an increased current density of 1 A g −1 . When used as an interface protective coating for zinc anodes, the uniform pore channels of DDA-Cu facilitated homogeneous zinc-ion deposition, which effectively suppressed dendrite growth and side reactions, typically a hydrogen evolution reaction (HER). Compared with bare zinc anodes, the Zn@DDA-Cu anode significantly extended battery lifespan, demonstrating stable cycling for over 3500 h at 0.5 mA cm −2 . Notably, the full battery with a Zn@DDA-Cu anode and a DDA-Cu cathode exhibited stable cycling for 100 cycles at 1 A g −1 , retaining a capacity of 185.5 mAh g −1 . This study provides an innovative strategy for the development of promising EC-MOFs for practical ZIB application.

CAS / MDL: 64-17-5 68-12-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING · 2025 · IF 4.6

Oxygen defect engineering at TMOx (TM = Mn, Co, Fe, Ni, Cu, Zn)/TiO2 interfaces: A strategy for high-efficiency catalytic toluene degradation

Yaqi Wu,Jianhua Qian,Jinjuan Xing,Junhua Li,He Huang,Yanan Wang,Xueming Kang,Lijuan Wang,Jiasheng Xu

Volatile organic compounds (VOCs), as hazardous environmental pollutants emitted from chemical industries, cause significant threats to human health and ecological environment owing to their inherent toxicity and carcinogenicity. Catalytic oxidation has emerged as a promising technology for VOC elimination, enabling complete degradation of pollutants into CO 2 and H 2 O. This study investigates transition metal oxide (TMO x , TM = Mn, Co, Fe, Ni, Cu, Zn)/TiO 2 catalysts for toluene degradation. Since the catalytic efficacy of TiO 2 -based catalysts critically depends on the quantity of surface oxygen vacancy (O v ) in heterogeneous processes, we engineered O v -rich interfaces by breaking atomic periodicity arrangements and generating unsaturated coordination sites. These structural modifications enhanced oxygen migration rates and increased reactive oxygen species availability. Among the synthesized catalysts, CuO/TiO 2 exhibited the highest performance, achieving 90 % toluene conversion (T 90 ) at 286 °C under a weight hourly space velocity (WHSV) of 20,000 mL/(g·h) with an initial toluene concentration of 1000 ppm. The measurement of in-situ DRIFTS suggested that toluene oxidation process abided by the path of toluene → benzaldehyde → benzoic acid → anhydride →CO 2 and H 2 O. Furthermore, the by CuO/TiO 2 catalyst demonstrated great reusability, and long-term stability, highlighting its potential for industrial-scale VOC abatement applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF FOOD COMPOSITION AND ANALYSIS · 2025 · IF 4.6

Rapid identification of Longjing tea from different scale origins by a colorimetric sensor based on the oxidase-like activity of Cu-CDs

Huiru Zhang,Wanjun Long,Siyu Wang,Kangyan Zhang,Hengye Chen,Haiyan Fu

s As a typical national product of geographical indication in China, the provenance of Longjing tea exerts a significant influence on its quality and market value. This study presents a smart and fast colorimetric sensor based on the oxidase-like activity of copper-doped carbon dots (Cu-CDs) for the discrimination of Longjing tea origin and grade at different scales. Based on the differences in catechin content among Longjing teas from different origins and grades, the sensor utilizes the differential restoring capacities of catechins to amplify the characteristic differences between tea samples. Upon introduction of the Cu-CDs sensing system, its oxidase-like activity catalyzes redox reactions between tea catechins and TMB, inducing observable color changes through modulation of particle surface charge distribution and aggregation states. By extracting RGB values from color images and integrating PLS-DA and RF chemometric models, this study can not only quickly and accurately identify the types and contents of eight catechins, but also visually distinguish the origin and grade of Longjing tea. The discrimination accuracy rate for both the training set and the prediction set reached 100.00%. This method has been shown to facilitate rapid on-site testing, thereby providing an effective means of swiftly identifying the origin of Longjing tea.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED ORGANOMETALLIC CHEMISTRY · 2024 · IF 3.7

A Pyridazine-Based Cadmium(II) Organic Framework With pcu Topology as a Luminance Sensor to Nitrobenzene, Al(III), and Cu(II) Ion

Huang Pei-Pei,Wu Ting-Ting,Tuo Meng-Qi,Zhang Rui-Ying,Shuai Chun-Jiang,Liu Bo,Song Juan,Zhang Sheng-Rui,Lu Jiu-Fu

In the field of water decontamination, the design of luminance sensor for sensitive detection of heavy metal ion toxic and nitroaromatic compounds are important and challenging. Herein, a new luminescent Cd(II) metal–organic framework (MOF), {[Cd 2 (H 2 O) 3 (4-CPCA) 2 ]·2H 2 O} n ( SNUT-27 ) (H 2 (4-CPCA) = 1-(4-carboxyphenyl)-4-oxo-1,4-dihydropyridazine-3-carboxylic acid) was obtained by the reaction of flexible ligand H 2 (4-CPCA) and Cd(II) ions, characterized by single crystal X-ray diffraction, PXRD, FT-IR, and TGA, the samples were further analyzed. The analysis of single crystal X-ray diffraction showed that SNUT-27 possesses a distinct three-dimensional spatial arrangement and demonstrates impressive fluorescence properties. Particularly, SNUT-27 showed a highly sensitive response to the nitro-aromatic compounds nitrobenzene by fluorescence quenching, and in contrast, showed a fluorescence enhancement response to Al 3+ and Cu 2+ . SNUT-27 can be effortlessly recycled by simply rinsing with water post-sensing experiments, showcasing its reusability. Additionally, potential detection mechanisms have been explored.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2025 · IF 7.7

Rapid electrochemically-driven assembly of two-dimensional metal-organic framework nanozymes on Cu foil for boosting sensitive SERS detection of ochratoxin A

Xingliang Cheng,Ying Chen,Gongke Li,Yuling Hu

Nanozymes, as catalytic nanomaterials mimicking natural enzymes, have emerged as powerful tools for analytical sensing. However, conventional methods for nanozyme synthesis and immobilization often suffer from time-consuming processes and inefficient substrate integration. Herein, we develop an innovative electrochemical strategy that achieves simultaneous synthesis and immobilization of sponge-like two-dimensional tetrakis(4-carboxyphenyl)porphyrin-Fe (Cu-TCPP(Fe)) nanozymes (termed as STCTFzymes) on Cu foils within only 6 min. Kinetic analysis confirms that the electrochemical growth follows a diffusion-controlled instantaneous nucleation mechanism. The resulting STCTFzymes exhibit enhanced operational stability enabled by firm substrate anchoring and facile recyclability through physical retrieval of the copper support. Leaching tests and post-recycling structural analysis further validate the excellent structural integrity and anti-leaching capability of STCTFzymes. Given the excellent peroxidase-like (POD) activity of STCTFzymes, a surface-enhanced Raman scattering (SERS) method based on aptamer-specific recognition was developed using ochratoxin A (OTA) as a model analyte. The OTA aptamer was adsorbed on the surface of STCTFzymes to block the catalytic site and turn off the POD-like activity. Upon specific binding of OTA to the aptamer, the enzyme activity of STCTFzymes was reactivated, resulting in a favorable change in SERS signal. The established method showed a wide linear range (0.3–500 ng/mL) and low detection limit (0.091 ng/mL) for OTA, with superior selectivity, high sensitivity and satisfactory stability. This electrochemically-assisted self-assembly provides a new approach for developing robust nanozymes architectures on heterogeneous substrates. When synergistically integrated with aptamer-based recognition, the STCTFzymes presents a universal strategy for sensitive detection of biotoxins exhibiting inherently weak Raman response.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Confined construction of COF@Cu-nanozyme with high activity and stability as laccase biomimetic catalyst for the efficient degradation of phenolic pollutants

Ying Tang,Shanliang Jiang,Wenyuan Li,Syed Jalil Shah,Zhenxia Zhao,Lie Pan,Zhongxing Zhao

Construction of highly-active nanozymes featuring merits of enzymes and nanomaterials is challenging for biomimetic catalysis. Herein, “confined coordination” strategy was proposed to engineer a novel laccase-nanozyme supported on mesoporous COF-OMe (Cu-Cys@COF-OMe) for the effective degradation of phenolic pollutants. In-situ L -Cysteine modification and confined Cu-coordination implanted unique Cys-multicopper (Cu + /Cu 2+ ) cluster in COF-OMe mesopores, and engineered biomimetic active pockets to which achieved efficient synergistic diffusion-adsorption-catalysis. Cu-Cys@COF-OMe realized 1.9 times higher enzymatic activity than that of laccase and 2.1–17.0 times higher monatomic copper activity than that of reported state-of-the-art laccase nanozymes, respectively. Besides, Cu-Cys@COF-OMe displayed catalytic merits of nano-materials over laccase, which demonstrated enhanced catalytic activity with temperature and excellent stability under variable reaction conditions. Cu-Cys@COF-OMe nanozyme exhibited 1.4 times faster degradation kinetics (of laccase) for phenolic pollutants, which was further intensified (3.4 times) after exposure to NaCl. This work opens a promising avenue for better design of laccase nanozymes to realize effective phenolic pollutants degradation for large-scale applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2025 · IF 7.7

Hierarchical flower-like Cu-doped SnO2/Ag2S heterojunctions decorated with Ag for excellent sensing performance toward n-butanol at low operating temperatures

Shixin Huang,Wei Liu,Hailong Lin,Zhicheng Wen,Chunjin Hang,Rong An,Yongfeng Li,Yanhong Tian

The design of materials for the detection of n-butanol at low operating temperatures is of great significance for the reduction of power consumption and the improvement of the safety of the gas sensor. In this study, the solvothermal method and subsequent Ag-loading treatment were employed to synthesise hierarchical flower-like Cu-doped SnO 2 /Ag 2 S heterojunctions decorated with Ag (CSAA). The morphological and structural characterisation demonstrated that the amount of Cu 2+ doping and the duration of electroless Ag plating played a pivotal role in the morphological evolution of the SnO 2 -based hierarchical structure. The optimal CSAA composite exhibits the highest response of 1136 and the shortest response time of 6   s to 50 ppm n-butanol at 80°C, accompanied by superior selectivity, repeatability, humidity and long-term stability. The enhanced sensing performances of the CSAA sensor can be mainly ascribed to the hierarchical porous structure, the doping of Cu 2+ , the construction of SnO 2 /Ag 2 S heterostructures and the decoration of Ag nanoparticles (Ag NPs). Furthermore, the density functional theory simulation was employed to investigate the influence of Ag NPs and Ag 2 S on the adsorption properties and electronic behaviour of n-butanol on the surface of SnO 2 . This work proposes a friendly strategy and theoretical support for enhancing the sensing performance of MOS sensors in the practical detection of n-butanol.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Ultra-sensitive, multi-component, and real-time detection of heavy metal ions via AgNPs@Cu-TCPP(Pt) sensitized strong coupling plasmonic sensor

Jie Yan,Runcheng Liu,Jian Shi,Wen Yang,Shouzhen Jiang,Zihao Zhang,Mingshun Jiang

The high toxicity and bioaccumulation of heavy metal ion pollutants pose severe threats to the environment and public health. Tilted fiber Bragg grating-based surface plasmon resonance (TFBG-SPR) sensors have emerged as effective tools for heavy metal ion sensing owing to their portability and rapid response. These sensors typically feature a single plasmonic structure. And they are constrained by hardware restrictions and complex spectral analyses. Thus, these conventional designs render multicomponent detection and precise analysis challenging. To address these limitations, this study introduces a lightweight multichannel sensing platform based on a composite plasmonic TFBG structure. A two-dimensional metal–organic framework (2D MOF Cu-TCPP(Pt)) and silver nanoparticles (AgNPs) are integrated onto a gold (Au)-coated TFBG surface. This configuration enables strong coupling between the SPR and localized SPR (LSPR). Hence, the signal sensitivity is enhanced. The molecular sieve effect of the Cu-TCPP(Pt) improves the target analyte enrichment and suppresses the background interference, thereby ensuring a stable signal output. Additionally, a DNA aptamer conformational switching strategy ensures selective target analyte recognition. This platform integrates an AgNPs@Cu-TCPP(Pt)/Au/TFBG sensor, optical channel array, and real-time signal processing module and enables simultaneous detection of Pb 2+ , Cd 2+ , and Hg 2+ within 6 min, with detection limits of 0.007, 0.012, and 0.005 nM, respectively. The proposed sensor effectively mitigates background interference in complex matrices, demonstrating excellent linearity and recovery. Compared with conventional TFBG-based methods, this platform offers high sensitivity, short detection times, and enhanced robustness, and presents a novel solution for real-time multicomponent detection in complex matrices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
LANGMUIR · 2025 · IF 3.9

In Situ Encapsulation of Organophosphorus Hydrolase into a Reduction-Catalytic Cu-MOF for Chemoenzymatic Cascade Conversion of Methyl Parathion to 4-Aminophenol

Qianqian Li,Qinghong Shi,Xiaoyan Dong,Linling Yu,Yan Sun

The highly toxic organophosphate pesticide methyl parathion (MP) is widely used in agriculture and thus poses significant risks to the environment. Organophosphorus hydrolase (OPH) can effectively catalyze the hydrolysis of MP, but generate a toxic product of 4-nitrophenol (4-NP), so the following reduction of 4-NP to 4-aminophenol (4-AP) with low toxicity but high economic value has been designed for sustainable development. Therefore, the cascade conversion of highly hazardous MP to economically valuable 4-AP is an attractive strategy for both environmental remediation and industrial applications. In this study, we synthesized a reduction-catalytic cupric metal–organic framework (CuBDC) in solvent-free aqueous phase and under mild conditions and in situ encapsulated OPH within CuBDC via a cation polyelectrolyte poly(allylamine hydrochloride) (PAH)-assisted biomineralization, creating a chemoenzymatic cascade catalyst (OPH-PAH@CuBDC) for MP conversion to 4-NP. The optimized OPH-PAH@CuBDC exhibited 154% hydrolysis activity of free OPH, 130% reduction activities of pure CuBDC, and an average cascade conversion rate of 6.2 μmol·min–1·gcatalyst–1, affording a complete conversion of 50 μM MP to 4-AP in only 6 min at low reductant concentration (20 mM NaBH4), due to the Cu2+-activation effect on the encapsulated OPH and the PAH-induced exposure of more reduction-catalytic sites, respectively. Furthermore, OPH-PAH@CuBDC retained 95% activity in 10 day storage and about 50% activity in 10 recycles. The results proved that OPH-PAH@CuBDC is a promising chemoenzymatic catalyst with great potential in practical applications for MP detoxification and resourcilization.

CAS / MDL: 10125-13-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
TALANTA · 2025 · IF 6.1

In situ synthesized H2O2 self-supplying composite peroxidase mimic CuO2@S/Cu-NC for portable detection of histamine and seafood freshness monitoring

Chenyu Zhou,Jianxin Qiang,Wanyi Zhang,Yuntai Lv,Xingguang Su

The application of peroxidase-like nanozymes in on-site detection was often restricted due to the cumbersome operation caused by necessary step of adding H 2 O 2 . Herein, a novel composite peroxidase mimic CuO 2 @S/Cu-NC with self-supplying H 2 O 2 function was prepared by in situ synthesis of the copper peroxide nanodots (CuO 2 ) on the S/N co-doping carbon-based copper nanozyme (S/Cu-NC). The CuO 2 could produce H 2 O 2 in acidic environment, and the in situ formed H 2 O 2 could immediately bind to the active sites of S/Cu-NC, resulting in the greatly accelerated catalytic reaction efficiency. Because of the property of H + -induced H 2 O 2 production of CuO 2 @S/Cu-NC, the changes of pH value could affect its peroxidase-like activity. Therefore, a sensitive and convenient method for histamine sensing was established. Furthermore, a convenient test swab was designed for the portable histamine detection and visual monitoring the of seafood freshness, which showed great potential of multifunctional nanozyme in the field of food monitoring.

CAS / MDL: 693-98-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF CHEMICAL ENGINEERING · 2025 · IF 3.7

Enhancing low-temperature NH3-SCR activity via dual-phase MnOx/Cu-SSZ-13 composite catalysts: The different roles of Mn2O3 and Mn3O4

Dingding Liu,Yating Huang,Zhenguo Li,Guohua Jing,Yongdan Li,Huawang Zhao

The advancements in engine technology have led to a decrease in exhaust temperatures, hence enhancing the activity of Cu-SSZ-13 at low temperatures becomes crucial and challenging. This enhancement can be achieved using dual-phase metal oxide/Cu-SSZ-13 composite catalysts. In this work, we evaluated the comparative efficacy of Mn 3 O 4 and Mn 2 O 3 and discovered that Mn 3 O 4 exhibited a significantly superior enhancement in deNO x activity of Cu-SSZ-13 at low temperatures, achieving 95% NO x conversion at 200 °C. This is substantially higher than the conversions recorded by Mn 2 O 3 /Cu-SSZ-13 (78%) and Cu-SSZ-13 (40%). Kinetic and IR results demonstrate that Mn 3 O 4 /Cu-SSZ-13 and Mn 2 O 3 /Cu-SSZ-13 composite samples share a same low-temperature pathway, where bridged nitrates formed on the MnO x react with adsorbed on Brønsted acid sites in Cu-SSZ-13. In this reaction pathway, bridged nitrate formation is identified as the rate-determining step. The distinctive structure of Mn 3 O 4 triggers an increase in oxygen vacancies, creating a higher content of chemically adsorbed oxygen, compared to Mn 2 O 3 . Those adsorbed oxygen facilitates bridged nitrate formation. Consequently, due to the larger amount of bridged nitrate formed on Mn 3 O 4 compared to Mn 2 O 3 , the Mn 3 O 4 /Cu-SSZ-13 sample exhibits higher activity.

CAS / MDL: 20694-39-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2025 ·Vol. 35 ·期 36 ·2425475 · IF 19

Accordion-Like Structure MBene with Ordered Metal Vacancies as Catalytic Host Material to Enhance Se Reaction Kinetics in Aqueous Cu-Se Batteries

Sai Dong,Zhuo Chen,Huibin Liu,Ying Zhang,Xiaoteng Yan,Zhijie Cui,Zhaohua Jiang,Jing Li,Huiting Xu,Wenchao Peng,Jiapeng Liu

Aqueous copper-selenium (Cu-Se) batteries have received increasing attention in energy storage research due to their high theoretical specific capacity and inherent safety. However, the sluggish reaction kinetics of the selenium (Se) cathode hinder its development. Herein, an accordion-like structure transition metal boride (Mo 4/3 B 2 T z MBene) with ordered metal vacancies is synthesized and employed as Se catalytic host material for aqueous Cu-Se batteries. The Mo 4/3 B 2 T z host material exhibits a unique layered structure, abundant active sites, and high electrical conductivity, which significantly improves the kinetic properties of the selenium redox reaction in aqueous Cu-Se batteries. As a result, the Se-Mo 4/3 B 2 T z cathode delivers a high discharge capacity of 1010 mAh g −1 at 1 A g −1 and greatly enhances rate performance with a reversible capacity of 693 mAh g −1 at 25 A g −1 . Meanwhile, the Se-Mo 4/3 B 2 T z cathode maintains an impressive 755 mAh g −1 discharge capacity after 1500 cycles at 20 A g −1 . Furthermore, the conversion mechanism of aqueous Cu-Se batteries is illustrated by different characterization methods and density functional theory calculations. This work introduces a distinctive approach to accelerating the reaction kinetics of aqueous Cu-Se batteries via MBene-based catalytic host material.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。