JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2022
·Vol. 33
·期 36
·26813-26824
·
IF 2.779
Huang Sheng-Jiang,Li Le-Zhong,Tang Jian,Wang Rui,Xiong Zhe,Wu Xiao-Hui,Guo Hai-Shan,Chang Xin,Zhong Zi-Chen
NiZnCo ferrite has a wide range of applications in high-frequency devices, but its performance can be further improved to meet more requirements. In this work, Sc 3+ -substituted Ni 0.5 Zn 0.4 Co 0.1 Sc x Fe 2-x O 4 (NZCScF, 0 ≤ x ≤ 0.1) ferrite soft magnetic materials were successfully prepared by sol–gel self-propagating approach. After using Sc 3+ doping, the dielectric loss and dielectric constant are significantly reduced. The intensity of the coercive field decreases significantly with a rise in the Sc 3+ content. It is noteworthy that after adding Sc 3+ ions, the saturation magnetization can reach 94.27 emu/g, an increase of about 27%, and the initial permeability is increased by about 73%. In the high-frequency scope, the magnetic losses increase very little and up to 100 MHz the magnetic losses remain low. In conclusion, Sc 3+ substitution effectively improves the electromagnetic properties of NiZnCo ferrite and greatly enhances the saturation magnetization and initial permeability. It can serve as a guide for the material application of a series of high-frequency devices such as radio-frequency microwave devices.
✓ 已验证
DOI
高影响因子
CHEMICAL PAPERS
·
2014
·Vol. 68
·期 8
·1132-1136
·
IF 1.193
Tao Hong-Wen,Wang Xia,Yi Ping-Gui,Deng Zhi-Hong,Yu Xian-Yong,Li Xiao-Fang
A class of stereo-isomerically-pure alkanediol monoglycosides, 2-hydroxyethyl per- O -acetyl pyranosides ( IIIa-IIIf ), was conveniently prepared by a one-pot reaction of per- O -acetylated pyranoses ( Ia-If ) and 2-( tert -butyldimethylsilyloxy)ethanol ( II ) with catalysis by BF 3 ·OEt 2 . The α -( IIIa ) or β -linked glycosides ( IIIb-IIIf ) with 1,2- trans -configuration were obtained from glycosyl donors with participation of the neighbouring 2- O -acetyl group. BF 3 ·OEt 2 , along with hydrogen fluoride released from BF 3 ·OEt 2 under the experimental conditions used, facilitates the subsequent de-protection of siloxane to successfully afford 2-hydroxyethyl per- O -acetyl-pyranosides.
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2014
·Vol. 18
·期 7
·2027-2033
·
IF 2.234
Chen Dongrui,Li Benzhen,Liao Youhao,Lan Hongwei,Lin Haibin,Xing Lidan,Wang Yating,Li Weishan
Three samples, LiNi 0.5 Mn 1.5 O 4 , LiNi 0.4 Mn 1.4 Co 0.2 O 4 , and LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 , were prepared by sol–gel method and characterized by powder X-ray diffraction, Fourier transformed infrared spectroscope, scanning electron microscopy, Brunauer–Emmett–Teller surface area, four-probe resistance, cyclic voltammetry, electrochemical impedance spectroscopy, and charge–discharge test. It is found that the co-doped sample LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 exhibits an improved performance compared with the Co-doped sample LiNi 0.4 Mn 1.4 Co 0.2 O 4 and the undoped sample LiNi 0.5 Mn 1.5 O 4 , especially at elevated temperature. At 25 °C, the discharge capacity of LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 is 130 mAh g −1 at 0.1 C and 103 mAh g −1 at 10 C. At an elevated temperature (55 °C), its 1 C discharge capacity is 136 mAh g −1 and maintains 95.6 % of its initial capacity after 100 cycles. Compared with the reported results of LiNi 0.4 Mn 1.4 Co 0.2 O 4 and LiNi 0.475 Mn 1.475 Co 0.05 O 4 , the co-doped sample LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 , with least content of Co, 0.05, possesses not only the high C-rate capacity but also the structural stability. The mechanism on the electrochemical performance improvement of LiNi 0.5 Mn 1.5 O 4 by the co-doping was discussed.
✓ 已验证
DOI
高影响因子
CHEMICAL PAPERS
·
2017
·Vol. 72
·期 3
·643-649
·
IF 1.258
Wang Bingtong,Zhang Zongbin,Zhang Xinyu,Sun Shixin,Wu Lin,Xing Rong
A simple, efficient, and eco-friendly catalytic system for the oxidation of cyclohexene to adipic acid with H 2 O 2 catalyzed by H 2 WO 4 in Brønsted acidic ionic liquids under solvent-free conditions has been developed. Reaction conditions such as the catalysts, the types of anions and cations for Brønsted acidic ionic liquids, reaction temperature, and the amount of hydrogen peroxide, were investigated. Moreover, the Hammett acidity functions ( H
0 ) of Brønsted acidic ionic liquids were determined using UV–visible spectrophotometry. The optimum reaction condition identified was n(H 2 WO 4 ):n(Brønsted acidic ionic liquids): n (cyclohexene): n (H 2 O 2 ) = 0.02:0.02:1:4.4, and the yield of adipic acid was 96% under the reaction scale of 10 mmol. The catalytic system can be easily recovered and reused for four reaction runs without significant loss of catalytic activity. Simple operation of the catalyst system and avoidance of the emission of nitrous oxide are the benefits of this work.
✓ 已验证
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2015
·Vol. 31
·期 6
·1051-1055
·
IF 0.875
Fang Xiaoting,Guo Hongyu,Yang Fafu,Bai Xiaoyan
By the Schiff-base condensation of formacyl calix[4]crown( 2 ) with raw chitosan, a novel calix[4]crown-grafted chitosan chelating polymer( 3 ) was conveniently prepared in good yield. The structure of polymer 3 was confirmed by elemental analysis, infrared(IR) spectrometry and X-ray diffraction(XRD) analysis. The elemental analysis suggests that the grafting degree of calixcrown unit was 22% on the amino groups of chitosan. The morphological characteristic of polymer 3 was studied by scanning electron microscopy(SEM). Polymer 3 possessed loose porous and smooth morphology of surface. The dyes adsorption abilities of polymer 3 for a series of organic dyes[Orange I(OI), Neutral red(NR), Victoria blue B(VB) and Brilliant green(BG)] were studied by solid-liquid adsorption experiments. The adsorption percentages increased from 45%―60%(raw chitosan for dyes) to 75%―90%(polymer 3 for dyes). The highest adsorption percentage reached 89% for VB. The saturated adsorption capacities for OI, NR, VB and BG were as high as 622, 564, 854 and 781 mg/g, respectively. The adsorption abilities kept stable at 70%―90% in the scope of pH=5―9. The adsorption abilities for anionic dye(OI) decreased gradually with the increase of pH and the opposite trend was observed for cationic dyes(NR, BG, VB). The adsorption percentages were 70%―90% after five times’ cycles for adsorption.
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2018
·Vol. 25
·期 18
·18001-18014
·
IF 2.8
Xu Zhengming,Han Dexia,Li Yuan,Zhang Pingling,You Lijun,Zhao Zhengang
In this study, the FPA90-Cl resin was magnetized with supported Fe 3 O 4 particles using a chemical co-precipitation method and its removal performance of bromate and coexisting precursors was explored. The magnetized FPA90-Cl resin was structurally characterized by SEM, FT-IR, and XRD. The effects of the initial concentrations, temperature, and resin dosage on bromate and bromide ion removal in drinking water were investigated using batch experiments. The magnetized FPA90-Cl resin exhibited a high removal efficiency for bromate and bromide ions at three initial concentrations, and the residual bromate concentrations were under the maximum contaminant level (MCL) of 10 μg L −1 after 80 min. The adsorption data of bromate and bromide ion could be well described by a pseudo-first-order kinetic model ( R 2 ˃ 0.98). The bromate removal alone was further studied by varying the initial solution pH, temperature, and competitive anions. The results showed that the magnetized FPA90-Cl resin could be used over a wide pH range (4.0–9.0). The maximum sorption capacity of the magnetized FPA90-Cl resin for bromate reached 132.83 mg g −1 at 298 K. The Freundlich and Redlich-Peterson isotherm models fit the bromate adsorption equilibrium better ( R 2 ˃ 0.99) than the Langmuir isotherm model ( R 2 ˃ 0.98). The thermodynamic analysis showed that the bromate adsorption process was endothermic. The negative ΔG and positive ΔS indicated that the process was spontaneous and that randomness increased after adsorption, respectively. The competition of coexisting anions with bromate was in the order of SO 4 2− > CO 3 2− > Cl − > NO 3 − > HCO 3 − > PO 4 3− . Additionally, the magnetized FPA90-Cl resin could maintain a high bromate and bromide ion adsorption capacity after five cycles of regeneration by a 0.1 M NaCl solution.
Graphical abstract
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF CLUSTER SCIENCE
·
2022
·Vol. 34
·期 1
·547-556
·
IF 3.447
Mo Songping,Shan Shaofei,He Lijuan,Jia Lisi,Chen Ying
Nanoencapsulation can effectively protect phase change material (PCM) from the ambient. Sugar alcohols have great potential for thermal energy storage. However, base or acid used in the most popular encapsulation methods may damage the PCM core. In this study, binary sugar alcohols of D-mannitol (DM) and inositol (IN) were first nanoencapsulated at neutral pH conditions. Nanocapsules with silica as the shell and different DM/IN ratios of 4.0:1, 4.6:1 and 5.5:1 were synthesized at different precursor ratios of tetraethoxysilane to triethoxysilane of 8:6, 9:5, and 10:4. The nanoencapsulation was demonstrated by scanning electron microscope (SEM), transmission electron microscope, energy-dispersive X-ray spectrometry, and Fourier transform infrared spectrometer. The phase change characteristics, thermal energy storage-release performance and thermal stability of the nanocapsules were studied by differential scanning calorimeter, thermal energy storage-release experiments, SEM, thermo-gravimetric analyzer (TGA) and thermal cycling tests. Results show that the phase change characteristics and thermal energy storage-release performance of the nanocapsules varied with the DM/IN mixing ratio and ratios of precursors. The DM/IN-4.6:1-9:5@SiO 2 nanocapsules exhibited the best phase change characteristics and thermal energy storage-release performance. Thermal stability of the nanocapsules was improved compared to pure binary sugar alcohols.
✓ 已验证
DOI
高影响因子
JOURNAL OF SURFACTANTS AND DETERGENTS
·
2013
·Vol. 17
·期 5
·919-928
·
IF 1.515
He Jun,Wu Zi-ying,Zhang Shuo,Zhou Yang,Zhao Feng,Peng Zhi-qin,Hu Zhi-wen
Microwave-assisted extraction (MAE) was utilized to extract tea saponin from oil-tea camellia seed cake. The factors influencing the extraction efficiency were studied, including the effects of microwave power, irradiation duration, temperature, ratio of solvent to material and aqueous ethanol concentration. By systematic orthogonal experiments, the optimal extraction technology was determined. Compared with a conventional extraction method, MAE shows great advantages with the extraction time reduced from 6 h to 4 min, 50 % organic solvent saved and about 14 % extraction yield enhanced. Fourier transform infrared spectroscopy testing and high performance liquid chromatography analysis proved that the extracted resultants were tea saponin with similar compounds as a standard tea saponin. The extracted tea saponin was applied on the cleaning of historic silks and showed good removal effect on the stains. This work provides useful information for fully use of oil-tea camellia seed cake and new applications of tea saponin at the protection of historic textiles.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 55
·期 3
·1157-1169
·
IF 3.442
Liu Qingsong,Hu Rui,Qi Jiqiu,Sui Yanwei,He Yezeng,Meng Qingkun,Wei Fuxiang,Ren Yaojian
Transition metal phosphides have been regarded as reliable supercapacitor electrode materials and extensively researched. In this work, a facile three-step way has been taken to synthesize NiCoP@NiCoP core–shell nanoarrays directly grown on carbon cloth, which was used as a high-performance supercapacitor electrode. Compared with the NiCo-LDH precursor and NiCoP nanowire and NiCoP nanosheet, NiCoP@NiCoP core–shell composite shows higher electrochemical performance owing to the integration of the advantages of phosphides and core–shell structure. To be specific, the as-fabricated NiCoP C–S electrode exhibits great electrochemical performance with high specific capacitance (1492.5 F g −1 at 1 A g −1 ), good rate performance (68.82% of the initial specific capacitance at 15 A g −1 ) and outstanding cycling stability (maintains 80.9% of the initial capacitances after 5000 cycles at 10 A g −1 ). Moreover, the assembled NiCoP C–S//rGO asymmetric supercapacitor device delivers a high energy density of 48.13 Wh kg −1 at the power density of 1125 W kg −1 and it still retains 20.94 Wh kg −1 at a high power density of 11250 W kg −1 , indicating its great possibility of practical application.
✓ 已验证
DOI
高影响因子
Frontiers of Materials Science
·
2023
·Vol. 17
·期 1
·1-9
·
IF 2.7
Li Zhen,Yu Libo
TiO 2 nanoparticles (NPs) in the size of ∼25 nm, namely P25, are very common material as the electron collecting layer in dye-sensitized solar cells (DSSCs). However, the light-scattering improvement of TiO 2 NP photoelectrodes is still a challenge. Here, we built TiO 2 cavities on the top of the TiO 2 NP layer by using carbonaceous microspheres as the template, forming the TiO 2 cavity/nanoparticle (C/NP) photoelectrode for the application in DSSCs. The cavity amount in the TiO 2 C/NP photoelectrode was controlled by adjusting the weight ratio of carbonaceous microspheres. SEM results confirm the successful formation of the double-layered TiO 2 C/NP electrode. J—V tests show that the optimized TiO 2 C/NP electrode prepared with 25 wt.% carbonaceous microspheres contributes to remarkable improvement of the short-circuit current density ( J sc ) and the power conversion efficiency (PCE). The best photovoltaic performance solar cell with the PCE of 9.08% is achieved with the optimized TiO 2 C/NP photoelectrode, which is over 98% higher than that of the TiO 2 NP photoelectrode. Further investigations of UV-vis DRS, IPCE, OCVD, and EIS demonstrate that the competition between light scattering effect and charges recombination in this TiO 2 C/NP photoelectrode is responsible for the PCE enhancement.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 6
·5526-5535
·
IF 2.195
Yang Fan,Hu Bo,Peng Ye,Hang Chunjin,Chen Hongtao,Lee Changwoo,Wei Jun,Li Mingyu
A silver (Ag) composite paste was fabricated based on Ag nanoparticles (NPs) and Ag microflakes (MFs). Robust interconnections were achieved after sintering in the temperature range of 150–225 °C. The shear strengths of the Ag MF + NP joints before and after thermal shock from − 50 to 150 °C for 1000 cycles were 155.7 ± 14.5 MPa and 78.4 ± 20.8 Mpa, respectively. The results show that the Ag composite paste not only has similar sintering properties to the Ag NP pastes but also exhibited superior mechanical reliability due to the addition of the Ag MFs. In addition, the sintered properties of different Ag pastes were discussed in terms of the coating organics, thermal behaviour and microstructure. The fracture modes after the shearing tests were analysed in detail. The Ag composite paste provides a potential solution for high-temperature applications.
✓ 已验证
DOI
高影响因子
Journal of Applied Spectroscopy
·
2017
·Vol. 84
·期 5
·900-905
·
IF 0.572
Zhao Zh.,Sheng L.,Su B.,Tao C.,Jing W.
The interaction between rhodamine 6G (Rh6G) and cerium sulfate was studied by the fluorescence quenching method. In a sulfuric acid medium, the interaction of Ce(IV) with Rh6G results in Rh6G fluorescence quenching. The maximum excitation wavelength (λ ex ) and the maximum emission wavelength (λ em ) are 530 nm and 555 nm, respectively. A good linearity between the relative fl uorescence intensity (ΔF) and Ce(IV) was observed in the range ~0.12–1.08 μg/mL. The detection limit was 1.4 × 10 –3 μg/mL. The optimum reaction conditions, influencing factors, and effect of coexisting substances were investigated in the experiment. We found that the concentration of Rh6G was 3.2 × 10 –6 mol/L, and the fl uorescence intensity was maximum.
✓ 已验证
DOI
高影响因子