INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Zhidong Wei,Yuchen Zhang,Huoshuai Huang,Junying Liu,Yiran Zhang,Xinling Li,Wenfeng Shangguan,Zhen Huang
In this context, a Al2O3 doped SrTiO3 (Al:SrTiO3) was synthesized via the molten salt method. The spatial separation active sites of the hydrogen evolution and the CO2 reduction in photocatalysis were revealed by using absorbed H2 as a probe, which indicated that CoOOH could be the photocatalytic CO2 reduction active site while RhCrOx could serve as the main site for hydrogen species activation and generation. The photocatalytic CO2 reduction could be determined by the spatial-temporal transfer of active hydrogen species coupled with carriers, from the interface of RhCrOx-Al:SrTiO3 to CoOOH-Al:SrTiO3 probably. More importantly, the competitive relationship between liquid water molecules, active hydrogen species, and CO2 was proved, indicating that the water film may hinder the spatial-scale migration of active hydrogen species and CO2 absorption. This work explored photocatalytic CO2 reduction from overall water splitting systems and emphasized the importance of the spatial shielding effect of interfacial water molecules.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2025
·
IF 7.5
Yangfeng Zheng,Cheng Zhai,Shuxun Sang,Aikun Chen,Jizhao Xu,Yong Sun,Hexiang Xu,Hongyang Xu,Yongshuai Lai
CO 2 foam fracturing technology has significant potential for enhancing coalbed methane (CBM) recovery. Intrusion of the CO 2 foam fracturing fluid into coal seams alters coal pore and fracture structures, thereby influencing CBM recovery. However, coal pore structural evolution modified by CO 2 foam fracturing fluid under varying reservoir temperatures and injection pressures remains unclear. To address this, a self-constructed high-temperature and high-pressure reactor was used to modify anthracite under different temperature (30–60℃) and pressure (3–6 MPa) conditions for 15 h. The pore structure and mineral composition of the modified anthracite were subsequently analyzed using low-temperature nitrogen adsorption, low-field nuclear magnetic resonance, environmental scanning electron microscopy, and X-ray diffraction. The results showed that temperature and CO 2 pressure significantly affected the modified coal-pore structure. Specifically, as the temperature decreased or the CO 2 pressure increased, the average pore diameter, total and effective porosities, NMR permeability, proportion of free fluid, and adsorption pore fractal dimension D 2 showed increasing trends, whereas the Brunauer–Emmett–Teller (BET)-specific surface area, and fractal dimensions D 1 , and D S decreased. Moreover, the combined effects of carbonic acid and sodium dodecyl sulfate in the CO 2 foam promoted the dissolution of clay and carbonate minerals, resulting in an increase in the number of surface fractures, pore enlargement, and the transformation of isolated pores into interconnected fractures. Pore structure evolution is primarily driven by mineral, and organic matter dissolution and fracturing, and CO 2 adsorption-induced matrix swelling. After performing CO 2 foam fracturing in deep high-temperature coal seams, implementing higher shut-in pressures can further enhance CBM recovery. These findings provide a fundamental theoretical basis for engineering applications of CO 2 foam fracturing technology to enhance CBM recovery.
✓ 已验证
DOI
高影响因子
FUEL
·
2025
·
IF 7.5
Zhuxian Gao,Caihu Li,Jianli Zhang,Xiude Hu,Jingjing Ma,Qingjie Guo
The capture and catalytic performance in integrated CO 2 and utilization (ICCU) potentially contributes to reduce CO 2 emissions with low cost and high efficiency. Breaking through the limitations of conventional dual-functional materials (DFMs). Herein, Fe-CaO/NF self-assembled with nickel foam (NF) as template is designed and prepared via hydrothermal method. CaO is anchored on the Ni-foam skeleton, and Fe-Ni bimetallic sites within the CaO matrix establishes dual-active centers synergizing CO 2 chemisorption and activation. The stability and activity stability of CO 2 capture and in-situ conversion were improved, CO 2 capture capacity is 12.8 mmol/g, CO yield is 9.33 mmol/g, ∼80 % CO 2 conversion is achieved, and 100 % CO selectivity is obtained. It shows good cycle stability and high activity in 12 cycles. The synergistic effect of Fe and Ni on CO 2 adsorption and conversion was confirm by DRIFTS. The interaction between CaO and Fe is weakened by Ni, while the interaction with Fe promotes the conversion of CO 2 . In comparison, the stability and activity of the without O 2 -containing cycle are higher than those of the O 2 -containing. O 2 has a negative effect, leading to competitive adsorption between CO 2 and H 2 O in the CO 2 capture process. The H 2 O molecular layer is formed on the surface of the rod-like structure, and the reduction of the active phase is interference, resulting the regeneration of CaO was decline.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Lin Qiao,Ze Zhang,Pengfei Yuan,Dong Fu
In recent years, CO 2 adsorption technology has garnered widespread attention, making the development of efficient CO 2 adsorbents a critical issue. This study has synthesized N, S co-doped carbon spheres (NxSyCz) using hydrothermal, impregnation, and one-step carbonization-activation methods, and systematically investigated their CO 2 adsorption performance. Characterization results reveal that NxSyCz possesses a rich microporous structure and a high specific surface area, with nitrogen and sulfur elements successfully doped into the carbon framework in various forms. Furthermore, CO 2 adsorption experiments demonstrate that NxSyCz exhibits excellent static CO 2 adsorption capacity (3.42 mmol/g at 298.15 K) and superior dynamic CO 2 adsorption capacity (3.08 mmol/g at 318.15 K). Additionally, NxSyCz displays good cyclic regeneration performance and high CO 2 /N 2 adsorption selectivity (IAST Selectivity = 117). Density Functional Theory (DFT) calculations further confirm that the presence of N and S functional groups significantly enhances the CO 2 adsorption selectivity of the adsorbent. Overall, the doping of N and S elements, along with the formation of a rich microporous structure, greatly enhances the CO 2 adsorption capacity of NxSyCz. Therefore, NxSyCz is expected to have promising applications in the field of CO 2 separation from coal-fired flue gases.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chunyan Tu,Hao Wang,Weiming Zhai,Chunting Liu,Wei Huang,Wenlin Li
Direct synthesis of aromatics from ethane and CO 2 using bifunctional catalysts composed of Zn and zeolite has drawn considerable interest in both academia and industry. Although a lot of research has explored the influence of Zn states on aromatization, the impact of zeolite defect structure on activity is still a black box. In this study, the distribution of Si and Al within the zeolite framework was precisely generated and tailored using post-treatment methods. A comprehensive set of characterization techniques, including XRD, SEM, nitrogen adsorption–desorption, MAS NMR, CP/MAS NMR, OH-FTIR, Py-IR, NH 3 -TPD, UV–vis DRS, XPS, and TG-MS, was employed to determine the structural changes. Our studies revealed that the active Si–OH sites could be effectively eliminated by the two-step alkali treatment. The chemical shielding of active Si–OH sites played a pivotal role in preserving the [Zn(OH)] + sites, which was crucial for the activation of ethane and CO 2 . The synergistic effect of Zn and Brønsted acid sites in zeolites catalyzing dehydroaromatization could be suppressed by the formation of [ZnO x ] 2+ sites within the zeolite. Notably, a high aromatics space–time yield of 3.3 mmol aromatics /g cat /h was achieved at 570 ℃ with a time on stream of 720 min on the Zn/ATH-0.1 catalyst, due to the joint contributions of Zn and Brønsted acid sites. We demonstrated the formation of Al pairs through the unique treatment, which subsequently served as key sites for regulating aromatics selectivity. These findings offer new insights into zeolite engineering, highlighting the importance of controlling Si–OH sites distribution for enhancing CO 2 -assisted ethane aromatization.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Mingnv Guo,Yulin Chen,Jiahao Liu,Jiaqi Qiu,Wenjing Wang,Zhongqing Yang
This study employs a Cu–Ni co–doping strategy to construct a Bi 2 MoO 6 photothermal synergistic catalyst, achieving highly efficient conversion of CO 2 reduction. Under ultraviolet–visible (UV–Vis) xenon lamp irradiation and 200 °C external heating conditions, the optimal sample (3Cu-6Ni-Bi 2 MoO 6 ) exhibited CO and CH 4 yields of 293.16 μmol·g −1 and 98.43 μmol·g −1 respectively, within 4 h, representing 6.8-fold and 5.3-fold increases compared to the undoped sample. The significant enhancement in CO 2 conversion activity can be attributed to the following factors: (1) Co-doping with Cu 2+ and Ni 2+ induces lattice distortion and oxygen vacancy formation, generating defect energy levels near the valence band edge. This reduces the bandgap to 2.1 eV, thereby broadening the visible light absorption range; (2) Oxygen vacancy defects provide highly efficient CO 2 adsorption and activation sites; (3) Doping with Cu and Ni enhances the separation and transport efficiency of photogenerated carriers.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Yingying Qian,Jianhai Wang,Yuesong Shen
Heterojunction engineering has garnered significant attention in photocatalysis as an effective strategy to address the rapid carrier recombination dynamics in semiconductor photocatalysts. The core challenge in constructing high-performance heterojunction systems lies in establishing optimized interfacial connections to achieve directional charge carrier migration. This study proposed a temperature-regulated band engineering strategy, through precise control of Ni-MOFs growth temperature and integration with WO 3-x possessing exceptional photothermal conversion capacity, to successfully construct an efficient Z-scheme heterojunction system. When the synthesis temperature of the Ni-MOF reached 140 °C, its conduction band negatively shifted to −1.2 eV (vs. NHE), resulting in a well-matched Z-scheme heterojunction with WO 3-x . The optimized 140-Ni-MOF/WO 3-x heterojunction demonstrated remarkable enhancement in charge separation efficiency while preserving strong redox capabilities through the Z-scheme charge transfer pathway. Under mild gas-solid reaction conditions (H 2 O as electron donor), the optimized catalyst exhibited excellent CO 2 reduction performance, achieving a CO production rate of 111.17 μmol·g −1 with 96.92 % selectivity. The temperature-depended modulation strategy for MOF electronic band structure proposed in this study paved the way for constructing efficient MOF-based photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Ruibin Xiong,Xiaohua Cao,Xingfu Li,Miao Lin,Dedong He,Yubing Li,Jichang Lu,Yongming Luo
Low-temperature CO 2 methanation efficiently enables efficient conversion of CO 2 into methane under mild conditions, presenting substantial potential for enhanced energy efficiency and economic feasibility. However, achieving highly efficient low-temperature CO 2 activation remains a critical challenge due to inherent kinetic constraints. In this study, the inverse-supported Ce/Ni catalyst (11 mol% Ce/Ni) was synthesized, which achieved 82% CO 2 conversion and nearly 100% CH 4 selectivity under photothermal synergy at 220 °C (300 W xenon lamp, 300–2500 nm, 1.5 W·cm −2 ), outperforming most conventional nickel-based catalysts. Moreover, the catalyst exhibited outstanding long-term stability, with only an 8% activity loss after 100 h of continuous operation. This superior performance was attributed to its CeO 2 -Ni interfacial configurations and abundant oxygen vacancies. In situ diffuse reflectance infrared Fourier transform spectroscopy analysis revealed that the CO₂ methanation over this catalyst proceeds via a dual-intermediate pathway involving CO* and HCOO*, with photothermal synergy significantly accelerating the intermediate conversion without altering the intrinsic reaction pathway. This study establishes an innovative strategy for designing low-temperature and high-performance CO 2 methanation catalysts via the integration of an inverse Ce/Ni configuration with photothermal synergy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Zhifu Liu,Guanghui Shi,Shuzhuang Sun,Yong Wang,Jingyue Shang,Songbai Hu,Wenkang Deng,Chuhan Fu,Chenghao Liu,Xiao Wang,Tao Qi,Guoping Hu
Mordenite (MOR) is a widely recognized zeolite for direct air capture (DAC) of CO 2 , attributed to its high adsorption capacity and low adsorption heat. However, current approaches to promote Na + enrichment in 8-member ring channel (8-MRz) of MOR through regulating the Si/Al ratio or controlling Al distribution are constrained by synthesis controllability and cost, limiting further adsorption capacity improvements. Here, we demonstrate a straightforward and effective modification of Na-MOR via Li + -exchange, improving its performance for DAC of CO 2 . Due to its higher charge-to-size ratio compared to Na + , Li + concurrently enlarges aperture size and enhances pore polarity of 8-member ring side pocket (8-MRy). This synergistic spatial and energetic interplay resulted in Li 0.90 Na-MOR exhibiting faster kinetics and a higher CO 2 adsorption capacity (1.42 mmol g −1 ) at 400 ppm compared to Na-MOR (1.02 mmol g −1 ). In situ diffuse reflectance infrared fourier transform spectra (DRIFTS) and density functional theory (DFT) analyses confirm that Li + exchange augments charge density within the confined space of 8-MRy, promoting stable co-adsorption of multiple CO 2 molecules. This work advances the understanding of confinement effects on CO 2 adsorption and paves the way for advanced adsorbent design.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2026
·
IF 17.2
Diankun Song,Yunyun Wu,Jiahui Hua,Chunfeng Shao,Zhaoyang Wei,Jianji Wang,Kai Dai
Imidazolium-based ionic liquids (ILs) exhibit great potential in promoting electrochemical CO 2 reduction reaction (CO 2 RR) by reducing overpotential reduction and enhancing catalytic efficiency. However, the regulatory role of ILs structure in the local physicochemical region at the electrode/electrolyte interface and in reaction kinetics remain unclear. In this study, we designed imidazolium-based ILs with tunable cation alkyl chain length and systematically revealed the dynamic interfacial regulation mechanism controlled by cation structure, based on in-situ infrared spectroscopy and molecular dynamics simulations. The commercial Ag electrodes in electrolytes with critical chain length exhibit nearly 100% Faradaic efficiency for CO production while maintaining high current density. Imidazolium cations with critical chain length effectively regulate the electric double layer at the Ag electrode/electrolyte interface: they notably balance a range of positive and negative factors, including hydrophobicity, CO 2 absorption, conductivity, viscosity, and hydrogen evolution reaction, etc . Collectively, these effects synergistically shape an optimized interfacial local physicochemical region, enhancing the rate of CO 2 catalytic reactions. This work elucidates the mechanistic framework of interfacial regulation in CO 2 RR and delivers molecular design principles for engineering IL-based electrolytes toward enhanced catalytic selectivity.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 12.1
Yanjun Liu,Ben Ge,Ning Yuan
Electrocatalytic CO 2 cycloaddition provides a green route for the synthesis of cyclic carbonates under mild conditions. However, activating sterically hindered styrene oxide (SO) remains challenging due to its weak electron-withdrawing phenyl group. Herein, we report an atomically dispersed Fe/N-C single-atom catalyst (Fe 1.98 ─N─C) for the efficient conversion of SO and CO 2 to styrene carbonate (SC). The catalysts deliver a 78% yield and 99% selectivity within 6 h, outperforming most reported electrocatalytic systems. Fe 1.98 ─N─C exhibits higher activity than an Fe nanoparticle catalyst and Fe-free ZIF-NC. Aberration-corrected STEM and XAFS confirm the atomic dispersion of Fe and the formation of Fe─N 4 coordination sites. In situ FTIR, EPR, and DFT calculations reveal that Fe─N 4 sites promote SO ring-opening and CO 2 activation through a synergistic Lewis acid-base mechanism. Controlled Fe incorporation enhances the surface area and porosity, facilitating the cycloaddition process. This work provides a robust strategy for designing MOF-derived single-atom catalysts for sustainable electrochemical CO 2 utilization.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Yang Wang,Xia Zhang,Yanle Yuan,Chunwu Lei,Jiaxu Wang,Götz Schuck,Weifang Liu,Guang Feng,Kaiyu Liu,Bohua Ren,Tao Chen
Li-CO 2 batteries utilizing greenhouse gas CO 2 as feedstock offer high energy density and environmental benefits. However, the sluggish CO 2 redox kinetics at cathodes lead to high overpotentials and low Coulombic efficiency, severely limiting practical applications. Here, the potential of Li-CO 2 batteries is unlocked through a high-entropy alloy (HEA)-driven synergistic coupling strategy using a PtPdFeCoCuZn (PPFCCZ) catalyst (∼2.2 nm). The unique multi-element composition of the PPFCCZ catalyst creates an interfacial environment that enables ternary synergistic coupling among the interface metal, Li 2 CO 3 , and Li 2 C 2 O 4 , collectively stabilizing the amorphous Li 2 C 2 O 4 formation pathway. This design achieves a record discharge voltage of 3.1 V with an ultralow overpotential (0.48 V) in Li-CO 2 batteries. Additionally, it achieves a cycling lifespan exceeding 1000 h at a current density of 20 µA cm −2 , overcoming the conventional trade-off between voltage and reversibility. This work provides a paradigm for designing multi-functional HEA catalysts to manipulate reaction pathways in Li-CO 2 batteries.
✓ 已验证
产品关联
DOI
高影响因子