JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Shiwei Xie,Wei Shao,Hui Zhan,Zheng Wang,Chengcheng Ge,Qingjie Li,Wenjing Fu
The widely usage of ethylenediaminetetraacetic acid (EDTA) arises environmental concerns on toxic metal mobilization, and challenges the conventional processes in water treatment. In the study Cu(II)-EDTA in near natural water was efficiently removed during a two-step electrocoagulation using Fe(0) anode (Fe-EC), including a transformation to Fe(III)-EDTA induced mainly by structural Fe(II) in anoxic Fe-EC and further degradation in oxic Fe-EC. The degradation of Fe(III)-EDTA was mostly attributed to an oxygen activation mechanism that involving O 2 − and hydroxyl radical ( OH) generation, as validated by the quenching experiments and electron spin resonance. Furthermore, O 2 − generated during Fe(II) oxidation took a dominant role on Fe(III)/Fe(II)-EDTA transformation instead of electrochemical reduction. Six intermediates during the Fe(III)-EDTA degradation were identified by LC-Q-TOF, indicating a pathway of stepwise breakage of N C bonds. The results revealed in this work is helpful to understand the contribution and fate of EDTA during Fe-EC treatment of metal-EDTA polluted water.
✓ 已验证
DOI
PubMed
高影响因子
Royal Society Open Science
·
2018
·Vol. 5
·期 4
·
IF 2.504
Donglin He,Huiping Zhang,Ying Yan
Cu-ZSM-5 catalysts were prepared by chemical vapour deposition for catalytic wet peroxide oxidation (CWPO) of phenol in a fixed bed reactor. Firstly, Cu-ZSM-5 catalysts with Cu loading of 0.5, 2, and 6 wt% were prepared and characterized by X-ray diffraction (XRD), N2 adsorption–desorption and X-ray photoelectron spectra (XPS). The characterization results demonstrated that CuO was uniformly dispersed on ZSM-5 with slight effect on the structure properties of the support. Then, several variables, such as the copper loading, reaction temperature, catalyst bed height and feed flow rate were investigated in the CWPO of phenol in aqueous solution at high concentration (1000 ppm). Compared with the catalyst prepared by the impregnation method, the Cu-ZSM-5 prepared by chemical vapour deposition has a better capacity of further oxidizing the intermediate organic products into carbon dioxide and water with less metal loading. Based on the Cu-ZSM-5 catalyst with Cu loading of 6 wt%, complete removal of phenol and a high TOC reduction (around 70%) have been achieved at the temperature of 80°C feed flow rate of 2 ml min−1 and catalyst bed height of 3 cm. Moreover, this catalyst maintained high catalytic activity after three runs with high phenol conversion (94%) under this optimum operating condition. Finally, the reaction mechanism was studied based on the intermediates detected by high-performance liquid chromatography (HPLC).
✓ 已验证
DOI
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2024
·
IF 10.7
Chao Liu,Qing Huang
Nanozymes are potential candidates for constructing sensors due to their adjustable activity, high stability, and high cost-effectiveness. However, due to the lack of reasonable means, designing and preparing efficient nanozymes remains challenging. Herein, inspired by the property of natural laccase, we applied the novel and facile low-temperature plasma (LTP) technology to fabricate a series of different base-ligand Cu metal organic framework (MOF) nanozymes (namely, A-Cu, G-Cu, C-Cu and T-Cu nanozymes) with laccase-like activity successfully. Owing to the different catalytic capacities of four types of base-Cu-MOF nanozymes in the response to five common effective bioactive substances, we constructed the nanozyme-encoded array sensor for the identification of different bioactive compounds. As a result, the four-channel colorimetric sensor array was constructed, in which four laccase-like nanozymes were utilized as the sensing units, achieving high-throughput, high-sensitivity and rapid detection/identification of five common bioactive compounds in the concentration range of 1.5–150 μg mL −1 through different color output patterns. It is worth noting that the as-prepared sensor array can successfully distinguish the natural bioactive compounds in a variety of real samples. Furthermore, with the assistance of smartphones, we also designed a portable smart sensing approach for detecting the bioactive compounds effectively in food. This study has therefore not only provided an effective way for preparation highly effectively nanozymes, but also established a new sensing platform for intelligent sensing of bioactive components in food.
✓ 已验证
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Zonglong Gao,Zhuan Li,Guoyuan Wen,Jiaqi Wu,Ye Li,Hongying Nie,Mengting Wei
In braking materials field, MAX phase has been introduced into Cu-based composite materials to address issues such as inadequate wetting between ceramic particles and the metal matrix. This study focuses on preparing Ti 2 AlN-ZrO 2 -B 4 C reinforced Cu-based materials via the powder metallurgy method, and investigates the effects and mechanisms of different Ti 2 AlN/ZrO 2 ratios on the mechanical, thermal, and tribological properties of these materials. The addition of an appropriate amount of Ti 2 AlN (3 wt%) can enhance the densification and mechanical properties of Cu-based materials, as the diffusion of Al atoms promotes the sintering process. Similarly, the diffusion of Al also improves the thermal conductivity at grain boundaries, resulting in samples with higher Ti 2 AlN content exhibiting superior thermal diffusivity. When the Ti 2 AlN content reached 7 wt%, the material exhibited optimal hardness (43.35 ± 1.05 HBW), moderate shear strength (19.84 ± 1.86 MPa), as well as excellent high initial braking speed friction coefficient and stability. The reinforcement primarily arises from the diffusion bonding between Ti 2 AlN and Cu, leading to the formation of Cu-Ti compounds at the interface, which facilitates Ti 2 AlN in providing frictional force during the friction process and promotes the formation of a friction film due to the “pinning effect”. Additionally, the layered structure of Ti 2 AlN and the subsequent formation of amorphous Al 2 O 3 after oxidation contributed to the enhancement of friction stability.
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Huali Zhang,Jiaxin Zhang,Hanjun Wu,Yi Pan,Yan Xia,Zhiquan Pan,Dongshen Wang
In this work, heterogeneous catalysts of Cu(II)-ethylenediamine tetramethylene phosphonic acid (Cu(II)-EDTMPA) complex intercalated layered double hydroxides (EDTMPA-Cu-LDH) was synthesized by co-precipitation method for visible-light photocatalytic degradation of Rhodamine B (RhB). The synthesized catalysts were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The results indicated that the EDTMPA-Cu-LDH showed a typical layered structure. After intercalation, layer spacing increased from 7.96 to 12.21 Å. The catalysts showed excellent catalytic activity for the degradation of RhB in visible light. The optimum conditions for RhB degradation were confirmed to be natural initial pH value 5.85, 10 mmol L –1 of RhB concentration, 7 mmol L –1 of H 2 O 2 concentration, and 0.3 g L –1 of catalyst dosage. The maximum degradation efficiency was 98.2% under the optimum conditions and excellent reusability and stability were obtained in the regeneration test. In the end, the reaction mechanism that might exist in the heterogeneous UV-Fenton system was proposed.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2019
·Vol. 150
·期 3
·815-825
·
IF 2.372
Huang Yan-Feng,Zhang Lu,Ma Li,Li Ying,Zhong Chongli
Abstract Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were achieved using nanoparticle-encapsulated MOFs Fe 3 O 4 @HKUST-1 as both a precursor and a self-sacrificing template. Fe 3 O 4 @HKUST-1 was thermally converted into magnetic Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites in different atmosphere (N 2 and air). The resulting composites not only kept superparamagnetic characteristics, but also exhibited improved peroxidase-like catalytic activity and high stability when compared to the precursor Fe 3 O 4 @HKUST-1. The morphology, crystal structure, magnetic and porous properties of Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were characterized, and the kinetics parameters and the influence factors on the peroxidase-mimicking activity such as temperature, pH and H 2 O 2 concentration were evaluated. On account of the excellent peroxidase-like activity, the as-prepared Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were successfully used for the catalytic removal of methylene blue (MB) dye with H 2 O 2 oxidant. This work provides an effective way to fabricate highly reactive MOFs-derived biomimetic catalysts, which have potential applications in bioassays and pollutant degradation. Graphic Abstract Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were achieved using Fe 3 O 4 nanoparticle-encapsulated HKUST-1 as self-sacrificial templates and demonstrated excellent peroxidase-like activity.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2017
·
IF 3.671
Yuvaraja Gutha,Yaping Zhang,Weijiang Zhang,Xu Jiao
Metal ions cause a serious public health problem. It is a great challenge to find an effective and efficient adsorbent to remove heavy metals from wastewater. Chitosan-based adsorbents are potential and effective for heavy metal ion removal. Hence a novel m-ECCSB was synthesized, characterized and utilized as an adsorbent for the removal of Cu(II) ions from aqueous solution. Various factors affecting the uptake behavior such as pH, adsorbent dosage, contact time, initial concentration of Cu(II) and temperature effect were investigated. Maximum adsorption capability (123.10 mg/g) was obtained at pH = 6, adsorbent dose of = 250 mg, rotational speed = 200 rpm, contact time = 60 min, and temperature of 323 K. The result of the kinetic study shows that the adsorption of Cu(II) could be described by the pseudo-second-order equation. Equilibrium data were analysed with the Langmuir, Freundlich and Dubinin-Radushkevich isotherms and Langmuir model was found to provide the best fit of the experimental data. The thermodynamic parameters showed that the adsorption of Cu(II) onto m-ECCSB was spontaneous (ΔG° = −8.990, −10.00 and −10.593 kJ/mol), endothermic (ΔH° = 15.674, 15.478 and 15.699 kJ/mol) and ΔS° (0.0814 J/mol K) suggests an increased randomness at the solid/solution interface under the studied conditions.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 42
·21029-21038
·
IF 9.931
Liang Zhang,Jing Wang,Xinyi Ren,Wentao Zhang,Tianshu Zhang,Xinnan Liu,Ting Du,Tao Li,Jianlong Wang
The excessive accumulation of toxic copper species makes it imperative to develop smart dual-functional materials for the simultaneous removal and detection of Cu(II) in drinking water. In this work, novel core–shell NH2-MIL-101(Al)@ZIF-8 nanoflowers were successfully fabricated via an internal extended growth mode under the regulation of polyvinylpyrrolidone (PVP) to achieve this goal. Benefiting from the specific affinity of imidazole nitrogen in ZIF-8 toward Cu(II), the resultant NH2-MIL-101(Al)@ZIF-8 shows high adsorption capacity (526.74 mg g−1). Moreover, the fluorescence of NH2-MIL-101(Al) shows a Cu(II)-dependent change, causing this composite to possess superior selective/sensitive detection with a broad linear range (1.5–625 μM) and a low detection limit (0.17 μM) for Cu(II). Specifically, the hybrid MOF@MOF structure provides greater sensitivity as compared to the individual constituent (pristine NH2-MIL-101(Al)) and the mixed state, which is ascribed to the rational optimization of the smart adsorbent based on the following two aspects. (i) The synergistic effect of the core–shell nanostructure improves the preconcentration ability at the interface between single MOFs. (ii) The existence of the three-dimensional hierarchical nanoflower architecture (structure optimization) accelerates the mass transport and sculpts the final composite with enhanced adsorption and detection ability. These indicate that the smart NH2-MIL-101(Al)@ZIF-8 nanoflower could be an excellent candidate for the synchronous remediation and selective detection of Cu(II) in aqueous systems, which could be potentially useful in wastewater treatment and water quality monitoring.
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2019
·
IF 5.256
Fenghua Geng,Changpeng Zou,Jinhua Liu,Qianchen Zhang,Xueying Guo,Yunchang Fan,Haidong Yu,Sheng Yang,Zhipeng Liu,Lin Li
As an important biomarker, alkaline phosphatase (ALP) is one of the most commonly assayed enzymes in clinical practice. Here a novel turn-on fluorescent nanoswitch for ALP assay was suggested. The nanoswitch was easily constructed via two high-affinity ligands between GSH and Al 3+ and PPi and Al 3+ based on the difference in the affinity. The primary fluorescence of as-prepared GSH capped Cu nanoclusters (NCs) turned on first upon the Al 3+ addition due to the Al 3+ induced aggregation induced emission (AIE) enhancement based on the high affinity of GSH and Al 3+ . The presence of PPi then made Al 3+ desorb from the surface of GSH capped Cu NCs due to the higher affinity of PPi and Al 3+ . As a result, the fluorescence of the Cu NCs was quenched. ALP could hydrolyze PPi into phosphate , destroying the PPi-Al 3+ complex and releasing Al 3+ . Thus, the Al 3+ binds to GSH again and the fluorescence was restored. The nanoswitch was demonstrated to be sensitive and selective for ALP assay and was successfully used for the ALP assay in the human serum.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 76
·61593-61600
·
IF 3.84
Liang Xiao,Ya Xiong,Zhanhao Wen,Shuanghong Tian
A kind of one-dimensional coordination polymer, [Cu(bipy)X]n (X = 2Cl− or SO42−), was prepared by Cu2+ and 4,4′-bipyridine (bipy) through a facile method, and used as the adsorbent for removal of acid orange 7 (AO7) and methyl orange (MO) from water. Two kinds of anions, chloride ion and sulfate ion, were tested as the counter ion in preparing the [Cu(bipy)Cl2]n and [Cu(bipy)(SO4)]n to balance the positive charge of [Cu(bipy)]n2+, to research the impact of anions on the adsorption performance of the [Cu(bipy)]n2+. Compared to [Cu(bipy)Cl2]n, [Cu(bipy)(SO4)]n can remove the dyes better both from the view of the adsorption capacity and adsorption kinetic constant. The MO can be more easily adsorbed than AO7 by both adsorbents. The adsorption capacity of [Cu(bipy)Cl2]n for AO7 and MO reached 848 mg g−1 and 1084 mg g−1, respectively. However, the adsorption capacity of [Cu(bipy)(SO4)]n for AO7 and MO reached 3308 mg g−1 and 1521 mg g−1, respectively. The dominant adsorption mechanism of the two adsorbent in removing dyes was found to be ionic exchange and the ultra high adsorption capacity of [Cu(bipy)(SO4)]n for AO7 was attributed to the two-step adsorption process which can be observed from the adsorption isotherm. The mechanism of the second adsorption step was speculated to be hydrophobic adsorption and π–π interaction.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Wenwu Zhang,Yanhong Zhou,Yiping Ding,Linlin Song,Qunhui Yuan,Weiwei Zhao,Chengyan Xu,Jun Wei,Mingyu Li,Hongjun Ji
Metallic conductive nanoink with the sensitivity of temperature, oxygen, and electrochemical migration is a great challenge for printed electronics. Here, the size-controllable Cu@Ag core–shell nanoparticles (NPs) conductive films with effective cost, excellent electrical conductivity, high electrochemical migration (ECM) and oxidation resistance were obtained successfully. The novel mechanism of lower temperature sintering for Cu@Ag NPs was proposed due to radius of curvature between a large amount of tiny Ag nanobumps generated by ‘dewetting’ behavior. The Cu@Ag NPs also exhibited extreme ECM and oxidation resistance. It could remain steady in air for 40 days and hardly oxide at a high temperature of 156℃, and its failure time of ECM was 4.6 times higher than that of Ag NPs. Besides, the resistivity was up to 3.21 μΩ∙cm (55% of the bulk conductivity of Cu) even sintered at 140 °C, which enjoyed a great advantage. Ultimately, serial flexible organic light emitting diodes were integrated by high precision inkjet printing, and their excellent bending resistance and printable performance were fully exhibited. Accordingly, integrating the advantages of controllable nanoscale, lower temperature sintering, optimized conductivity, high antioxidation, excellent ECM resistance, flexibility, and printability, we enlighten the practical applications of flexible printed electronics.
✓ 已验证
DOI
高影响因子
Frontiers in Marine Science
·
2021
·
IF 4.912
Han Xiaoxin,Wang Shiyu,Yu Xue,Vogt Rolf D.,Feng Jianfeng,Zhai Lifang,Ma Weiqi,Zhu Lin,Lu Xueqiang
Due to its small size, large specific surface area and hydrophobicity, microplastics, and the adsorbed contaminants may together cause potential negative effects on ecosystems and human beings. In this study, kinetics and size effects on adsorption of Cu(II), Cr(III), and Pb(II) onto PE, PP and PET microplastic particles were explored. Results indicated that the PE and PET microplastics have the higher adsorption capacity for Cu(II), Cr(III), and Pb(II) than that for PP microplastic. The adsorption capacity was affected by microplastic types and metal species. Among the three metals, Pb(II) had the largest adsorption amount on microplastic particles, especially on PET particles. Moreover, the adsorption capacities of microplastics increase with the decrease of particle size. The metal adsorption capacity of <0.9 mm microplastics is greater than that of 0.9–2 mm and 2–5 mm microplastics. The size effect on metal adsorption was largest for PE microplastic. More attention should be paid in case of the coexistence of heavy metals and tiny PE and PET microplastics in the environment.
✓ 已验证
DOI
高影响因子