Advanced Composites and Hybrid Materials
·
2023
·Vol. 6
·期 1
·1-9
·
IF 20.1
Chen Cheng,Wang Xi,Wang Yan,Gu Hongxi,Zhao Weixing,Zhang Wenxiong,Sewvandi Galhenage Asha,Wang Bo,Ma Chunrui,Liu Ming,Hu Dengwei
Digital light processing (DLP) 3D printing technology is widely applied in the fabrication of ceramics owing to the good printing precision and printing speed. Barium titanate (BaTiO 3 , BT) has attracted extensive attention of researchers due to the good piezoelectric constant, strong dielectric constant, and ease of integration. Therefore, DLP 3D printing technology is combined with the production of BaTiO 3 /1,6-ethylene glycol diacrylate/Polyethylene glycol (400) diacrylate (BT/HDDA/PEG(400)DA) nanocomposites to improve the electrical properties. A preparation method for composite slurry with high fluidity, high solid content, and low viscosity is proposed by comparing the electrical properties of BT/HDDA/PEG(400)DA nanocomposite fabrication with different solid content. The work demonstrates that 67 wt% BT/HDDA/PEG(400)DA nanocomposites are better solid content to DLP 3D printing technology and the printed nanocomposite has the excellent electric properties. After a post-processing, the 67 wt% nanocomposite slurry shows the higher relative density (91.69%) and exhibits piezoelectric constant, remnant polarization, and dielectric constant of 151 pC/N, 17.4 μC/cm 2 , and 7712, respectively. The results suggest that the DLP 3D printing technology provides an alternative method for the fabrication of complex functionality nanocomposite piezoelectric elements. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2023
·
IF 10.9
Chunyu Yuan,Huijun Lv,Yujin Zhang,Qian Fei,Dongdong Xiao,Hongfei Yin,Zhen Lu,Yongzheng Zhang
Properly engineered heterojunction photocatalysts warrant a more effective way to facilitate the separation of photoexcited electron-hole pairs and consequently bolster the photocatalytic hydrogen evolution performance. Herein, 3D bicontinuous nanoporous reduced graphene oxide (np-rGO) is served as a free-standing supporting matrix for the anchorage of CdS nanoparticles to obtain the highly efficient photocatalysis system for hydrogen production . The bicontinuous internal ligament and open nanopores in 3D nanoporous heterojunction are conducive to multiple reflecting and scattering of the incident light, leading to improved light absorption and utilization capacity. Moreover, the construction of p-n heterojunction with staggered band alignment is achieved in CdS/np-rGO to accelerate the transport of photo-excited carriers. The constructed CdS/np-rGO p-n heterojunction achieves a corresponding hydrogen generation rate of 2171.23 μmol g −1 h −1 , which is 3.6 times in comparison with bare CdS. DFT calculations also indicate the preferable photocatalytic performance of CdS/np-rGO could be assigned to the ideal interfacial charge rearrangement on the heterointerface, which optimizes the H* adsorption kinetic energies and leads to a remarkable enhancement in the charge separation efficiency. It is anticipated this work could provide new sight for making the best usage of sunlight to produce solar fuel.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PHYSICS LETTERS
·
2023
·
IF 2.8
Yue Chen,Huan Liu,Liang Hu,Youliang Shen,Lingfang Qiu,Liezhen Zhu,Qianxiang Shi,Xun Xu,Ping Li,Shuwang Duo
Novel Z-scheme ZnIn 2 S 4 /TiO 2-x photocatalyst was successfully fabricated through self-sacrificing template-chemical bath deposition combined with a NaBH 4 reduction method for the first time. It was found that ZnIn 2 S 4 /TiO 2-x exhibited high-efficient visible-light photocatalytic RhB degradation of 91 % within 40 min, which was almost 45.5, 1.2, and 6.1 times better than that of TiO 2 , ZnIn 2 S 4 /TiO 2 , and TiO 2-x , respectively. Moreover, an obscure change in catalytic activity can be observed after five recycles. The excellent photocatalytic performance can be attributed to the synergistic effect of Ov, ZnIn 2 S 4 , and MOF-derived TiO 2 , which extend the visible-light photoresponse range and promote the separation of photo-generated charge carriers.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 8
·3745-3757
·
IF 3.3
Litao Jia,Pei Yu,Ying Dong,Yonglei Xing,Juan Peng,Gang Ni,Xiaoyong Jin
The decomposition efficiency of refractory organic pollutants depends strongly on the characteristics of the photoanode semiconductors in the photoelectrocatalytic (PEC) process. The selection of superior materials with excellent PEC efficiency is a challenge in the practical application of PEC oxidation technology. Herein, a novel S-Co3O4/Bi2WO6 heterojunction photoanode was fabricated using a simple hydrothermal procedure. Compared with Bi2WO6 nanoflowers, the as-prepared S-Co3O4/Bi2WO6 photoanode had a large electroactive surface area, low charge transfer resistance, strong light absorption ability, and high separation efficiency for induced photogenerated electron/hole pairs (e−/h+). This relies on the fact that S doping not only controls the morphology of Co3O4 but also changes its intrinsic electronic structure to improve the interlayer polarization. Notably, the Z-scheme heterojunction formed by the combination of S-Co3O4 and Bi2WO6 not only enhances the e−/h+ separation efficiency but also results in a stronger redox ability than that of pure Bi2WO6. In addition, reactive species trapping experiments and electron spin resonance tests demonstrated that the S-Co3O4/Bi2WO6 photoanode plays a dominant role in the degradation of tetracycline (TC) by ˙O2− and ˙OH radicals. Therefore, the prepared S-Co3O4/Bi2WO6 photoanode exhibits better PEC performance than Co3O4, S-Co3O4 and Bi2WO6 in the degradation of TC. The optimized S-Co3O4/Bi2WO6 composite showed a degradation rate of 87.4% in 30 mg L−1 TC solution. This work provides a new strategy for the construction of efficient photoelectroanodes.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Rongping Xu,Jinlong Li,Guozhe Sui,Yan Zhuang,Dongxuan Guo,Ze Luo,Shuang Liang,Hong Yao,Chao Wang
The construction of heterojunctions is considered as an effective strategy to boost catalytic degradation activity of photo-Fenton catalyst. Herein, a series of CdS@CuS/g-C 3 N 4 (CC-x/CN) heterojunctions have been successfully prepared by hydrothermal and cation exchange process, which have been applied for the removal of methyl orange (MO) via photo-Fenton process. The results demonstrate that the exchange of Cu 2+ for Cd 2+ on g-C 3 N 4 could inhibit the aggregation of CdS@CuS and increase the light absorption range and the active sites. Under visible light illumination, CC-10/CN (molar ratio of CuS to CdS is 10%) exhibits the optimal photo-Fenton-like catalytic performance with the degradation efficiency of 96% towards MO (40 mg L −1 ) and the total organic carbon removal rate of 75% within 35 min illumination. The apparent reaction rate constant of CC-10/CN (0.088 min −1 ) is approximately 22 and 6.29 times higher than those of pure g-C 3 N 4 and CdS@CuS (molar ratio of CuS to CdS is 10%), respectively. The enhanced photo-Fenton catalytic activity of CC-x/CN is mainly ascribed to the formation of the photo-Fenton effect between CC-10 and g-C 3 N 4 , which promotes the conversion and recycling of Cu 2+ and Cu + . Meanwhile, the successful formation of the heterojunctions reduces the recombination rate of carriers. In addition, the cycling experiments demonstrate that CC-10/CN possesses favorable stability and recoverability. Overall, the well-designed CC-x/CN heterojunctions reveal desirable potential application in the effective treatment of sewage via photo-Fenton process.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Wenhao Yang,Bin Yao,Liang Chai,Guang Yang,Longjiang Deng
Flexible porous conductive composites have been widely applied for wearable sensing devices and there is continuous exploration towards multi-functionalization of porous conductive composites. In this work, through sugar template method and following immersion assisted reduction, polydimethylsiloxane (PDMS) sponge embedded with carbonyl iron (CI) was successfully anchored with silver nanoparticles (AgNPs) binded with block copolymer polystyrene- block -poly(ethylene- co -butylene)- block -polystyrene (SEBS). A superhydrophobic multifunctional sponge type conductive composites (SCC) was prepared (CI-PDMS/AgNPs-SEBS Sponge, abbreviated as CP/AgE Sponge). CP/AgE sponge had excellent superhydrophobic properties (water contact angle≈153°), efficient Joule heating (1.6 V, 101 °C within 180 s) and photothermal conversion capabilities (250 mW/cm 2 , 102 °C within 40 s). The CP/AgE sponge pressure sensor had excellent piezoresistive properties, including high sensitivity (3.8 kPa −1 ), wide detection range (160 kPa) and robust stability when subjected to 1000 compression-release cycles, which could be further utilized to accurately and reliably monitor the changing biophysical signals. Besides, CP/AgE sponge had high oil/water separation efficiency as well as magnetically guided waste oil adsorption ability. This work provides a new strategy for preparing a conductive sponge with superhydrophobicity and enriched functionality, which has broad applications in the fields of next generation multifunctional flexible electronics, effective oil/water separation and smart protective skins.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Yuxian Duan,Dongyang Jiang,Zhi Li,Xiaodi Jiang,Zichen Wang,Qianxu Ye,Liexing Zhou,Mingjun Wang,Jinming Cai
In this work, a novel method was used to prepare KTaO 3 using KF and Ta 2 O 5 to prepare KTaO 3 nanocubes. Then graphene/ KTaO 3 (Gr/KTaO 3 ) composites were synthesized by in-situ growth of graphene on KTaO 3 nanocubes for the first time. The prepared KTaO 3 possesses a small crystallite size and high crystallinity. The Gr/KTaO 3 composites have higher photocatalytic efficiency compared to pure KTaO 3 . Particularly, Gr/KTaO 3 90 had the highest photocatalytic activity, as it was able to degrade 99.5% of rhodamine B (RhB) within 40 min. According to ultraviolet and visible spectrum (UV-Vis) spectra, the absorption sideband of composites redshifts to the visible light area. Based on the results of PL and EIS, the increasing photocatalytic efficiency can be credited to the fact that graphene provides an efficient channel for electron transfer , which promotes photogenerated electron-hole pairs separation. Moreover, a free-radical trapping test indicated that h + and •OH were the main species in the photodegradation. Our investigation results can serve as a valuable guideline for the development of efficient photocatalysts based on KTaO 3 and graphene, which can be used in the removal of organic pollutants during environmental cleanup.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2023
·Vol. 13
·期 50
·35562-35568
·
IF 3.9
Fenglong Wu,Jin Song
Herein, we synthesized a hydrophilic support formed from amorphous Cr2O3 and KIT-6 containing P123 using a simple solvent-free thermal method for Co species. The obtained catalyst (denoted as Co/Cr2O3-F-X) exhibits high activity for hydrogen production from ammonia borane (NH3BH3). The optimal Co/Cr2O3-F-0.5 exhibits the highest catalytic performance with the turnover frequency (TOF) value of 111.1 min−1. Advanced characterizations suggest the high catalytic performance is attributed to the synergistic effect of the strong interaction between amorphous Cr2O3 and KIT-6 containing P123 and improved wettability of the catalyst.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Inorganic Chemistry Frontiers
·
2023
·Vol. 10
·期 14
·4230-4240
·
IF 7
Ziwang Zhang,Nan Yang,Zhuo Li,Jun Chen,Pin Chen,Yiqin Xu,Jianxin Shi,Mingmei Wu
Single-phase white light phosphors for phosphor-converted white light-emitting diodes (pc-WLEDs) have become a hot spot and attracted considerable attention. However, the unsatisfactory luminous efficiency and colour rendering index of this kind of device hinder their large-scale applications in the field of lighting. Herein, a novel multi-centre activated single-phase white light phosphor, Gd2Sr3B4O12:Ce3+,Tb3+,Sm3+, has been designed and prepared. The crystal structures of the host and the doped samples are characterized with XRD and Rietveld refinements. The band gap of the host calculated with the density functional theory is consistent with the value obtained from the UV-Vis reflection spectrum. Benefiting from the energy transfer paths of Ce3+–Tb3+, Ce3+–Sm3+ and Tb3+–Sm3+, which are quantitatively evaluated with photoluminescence spectra and decay curves, the intensities of the characteristic emission peaks of the three dopants are found to be closely interlocked and the emission colour of the phosphors can be precisely tuned by adjusting the relative ratio of the three ions. Under the excitation of near-UV light, the two phosphors of Gd2Sr3B4O12:0.03Ce3+,0.18Tb3+,0.05Sm3+ and Gd2Sr3B4O12:0.03Ce3+,0.22Tb3+,0.07Sm3+ emit white light with CIE coordinates of (0.32, 0.35) and (0.34, 0.34), and the quantum efficiencies are 46.8% and 34.9%, respectively. The temperature-dependent photoluminescence spectra of the phosphors show that the quenching temperature (T50%) is as high as 450 K. Finally, WLED devices with maximal colour rendering index of 87.5 are obtained by fabricating the two single-phase white light phosphors with 365 nm LED chips. The balanced and preferable comprehensive performances of Gd2Sr3B4O12:Ce3+,Tb3+,Sm3+ demonstrate that the as-prepared single-phase white light phosphor can be a promising candidate for fabricating near-UV chip-based WLEDs.
✓ 已验证
产品关联
DOI
高影响因子
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
·
2023
·
IF 4.5
Fang-xia XIE,Lu-lu ZHANG,Xiao ZHANG,Mei ZHANG,Xuan JIAN,Jian-xin LIU,Xiao-chao ZHANG,Ya-wen WANG,Rui LI,Cai-mei FAN
In order to simultaneously solve the problems of the poor light absorption capacity and high recombination rate of photogenerated carriers, Bi 5 O 7 Br photocatalyst with abundant ordered/disordered structures (O/D-Bi 5 O 7 Br) was prepared through a simple in situ disorder engineering. The prepared samples were characterized by XRD, TEM, HRTEM, SAED, XPS, UV-Vis diffuse reflectance spectra (DRS), and the activity was evaluated by photocatalytic degradation of tetracycline hydrochloride (TC) and hydrogen evolution under visible light irradiation. Results revealed that the ordered/disordered structure not only enhances the light absorption ability, uplifts conduction band position, facilitates the transfer and separation of photogenerated carriers, but also offers abundant unsaturated atoms as active sites for the photocatalytic process. Therefore, O/D-Bi 5 O 7 Br exhibits a high hydrogen evolution rate of 38.12 μmol/(g·h) and superior TC degradation rate of 86% within 135 min.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Qian Zhang,Wanyin Ge,Xinmeng Zhang,Yie Tian,Zheng Yin
White light-emitting diodes (WLEDs) are promising candidates for environment-friendly solid-state light sources, where modulation of white light has been a significant research priority. Here we achieved a new single-phase white light phosphor (Si NPs-M) by grafting silicon-based nanoparticles onto a red lanthanide coordination polymer by a simple wet chemical method . The activation of the energy transfer mechanism is controlled by changing the local site of ion coordination (by varying the Eu 3+ concentration) to achieve modulation of the molecule to fine-tune its emitted chromaticity. The synthesis of a single-phase phosphor based on ultraviolet (UV) pumped and as a WLED was realized. These WLEDs demonstrate white light for color coordinates of (0.3405, 0.3682), CRI of 78, and CCT of 5210 K. In addition, the WLEDs possess good optical stability as the drive current increase from 30 mA to 300 mA, while the phosphor maintains 87.4 % of the luminous intensity when the external temperature rises to 130 °C, indicating high stability. This work has potential applications for silicon-compatible display technologies that require fine control of efficient white light emission.
✓ 已验证
产品关联
DOI
高影响因子
Applied Sciences-Basel
·
2023
·Vol. 13
·期 13
·7529
·
IF 2.7
Zhangcheng Pan,Xiaolin Zhu,Tianyue Xu,Qingyu Xie,Haitao Chen,Feng Xu,Hao Lin,Jia Wang,Yongfeng Liu
All-inorganic CsPbI3perovskite quantum dots (PeQDs) have sparked widespread research due to their excellent optoelectronic properties and facile synthesis. However, attaining highly stable CsPbI3perovskite quantum dots (PeQDs) against heat and polar solvents still remains a challenge and hinders any further practical application. Here, by exploiting (3-aminopropyl) triethoxysilane (APTES) as the sole silica (SiO2) precursor, we report a one-step in situ synthesis of single SiO2-coated CsPbI3(SiO2-CsPbI3) PeQDs, namely that one SiO2particle only contains one CsPbI3PeQD particle. The obtained SiO2-CsPbI3PeQDs are cubic in shape, have a more uniform size distribution, and possess narrow emission, with near unit photoluminescence quantum yields of up to 97.5%. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirm the formation of SiO2through the hydrolysis of APTES on the CsPbI3PeQDs surface. Furthermore, they have a significantly improved stability against storage, heat, and ethanol. By combining purple-emission GaN light-emitting diodes, the SiO2-CsPbI3PeQDs were successfully employed as down-conversion emitters and exhibited considerable enhanced luminous performance and excellent stability, demonstrating their promising future in the practical application of solid-state lighting fields.Keywords:perovskite quantum dots;CsPbI3;photoluminescence;silica coating;heat and polar stability;instability
✓ 已验证
产品关联
DOI
高影响因子