AICHE JOURNAL
·
2026
·
IF 4
Jie Li,Ying Liao,Ming Guo,Yue Pan,Yaqian Li,Xuechao Yang,Yulin Wang,Meiyu Zhang,Mengnan Ma,Xiaobo Chen,Yibin Liu,Hao Yan,Chaohe Yang
Direct dehydrogenation of alcohols to aldehydes is a pivotal transformation in fine chemical synthesis. However, conventional thermal processes often suffer from low efficiency and high energy consumption. Herein, we propose an emerging and sustainable strategy that employs CO 2 -assisted in situ hydrogen extraction to drive the dehydrogenation of alcohols under mild conditions. Specifically, CO 2 as a soft oxidant adsorbs and activates on the Cu–ZnO–Al 2 O 3 composite oxide catalyst surface, generating reactive species (COO*) that selectively abstract hydrogen from the α -C of the alcohol. Combined Langmuir-Hinshelwood kinetic analysis and density functional theory calculations reveal a higher formation rate of the aldehyde product and the lower activation barrier for the key C–H bond activation process under the CO 2 atmosphere. As a result, the CO 2 -assisted dehydrogenation markedly enhances reaction efficiency, achieving a 60.21% conversion of 2-ethylhexanal under a low temperature (240°C), which is nearly twice that observed under the pure N 2 atmosphere. This CO 2 -assisted dehydrogenation strategy in this work exhibits a cooperative catalytic pathway that not only enables efficient aldehyde production but also utilizes CO 2 as a chemical resource.
✓ 已验证
产品关联
DOI
高影响因子
FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES
·
2022
·
IF 2.06
Xiaoqi Jin,Jinlong Ge,Linlin Zhu,Mingwen Xiong,Zhong Wu,Liyuan Zhang
A kind of hierarchical porous carbon (HCN) with three-dimensional network frameworks was successfully prepared by solvent-free nanocasting method using glucose as carbon source and ordered MCM-41 type of mesoporous silica with the different particle sizes as template. Meanwhile, its structure features and texture parameters were characterized by using XRD, N2 adsorption-desorption isotherms, SEM and TEM, FT-IR, Raman spectrum, XPS techniques. These results demonstrated that during the process of pyrolysis glucose was strongly interacted with mesoporous silica, leading to effective loading, then inverse duplicated the structure of mesoporous silica. The obtained sequence of hierarchical porous carbons possessed well-interconnected network structure and tunable wall thickness and size of network macropore. As demonstrations, the capacity of absorbed CO2 for serials of hierarchical porous carbons with three-dimensional network frameworks under room temperature was investigated. The result of CO2 adsorption isotherms indicated that the HCN pore architecture and morphologies played a key role in the CO2 capture process, specifically the size of network macropore and thickness of macroporous wall significantly affected the textural structure, the high microporous contents were benefit with improving the capacity of absorbed CO2.
✓ 已验证
DOI
高影响因子
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY
·
2025
·
IF 1.9
Yan Hai,Yuanqiang Zhu,Lei Tang,Xu Wang,Yuqi Wang,Tong Chen
The objective of developing effective triazine-based corrosion inhibitors aims to mitigate the significant issue of corrosion in carbon steel pipelines within oil and gas field environments. In the present study, we synthesised a corrosion inhibitor designated as ST-2 through a two-step process utilising melamine, octylamine, diethylenetriamine and ethanedioic acid as precursor materials. The structural characterisation of ST-2 was conducted using Fourier transform infra-red spectroscopy and proton nuclear magnetic resonance spectroscopy. The performance of ST-2 in inhibiting corrosion at a temperature of 90°C was evaluated through static weight loss and electrochemical techniques, which demonstrated a corrosion inhibition efficiency of 92.14% at a concentration of 200 mg/L. The structure–activity relationship and film-forming mechanism of ST-2 were investigated through the application of functional theory and molecular dynamics simulations. The results revealed that the heteroatoms present in the molecule exhibited significant interactions with the metal substrate. At a corrosion inhibitor concentration of 200 mg/L, the absolute value of the adsorption energy was determined to be 1084.74 kcal/mol. Under these experimental conditions, the resulting corrosion inhibitor film exhibited maximum thickness, optimal densification and enhanced corrosion inhibition performance.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2014
·Vol. 131
·期 22
·
IF 1.64
Yanhui Xiang,Lixin Xue,Jianhui Shen,Haibo Lin,Fu Liu
Poly vinylidene fluoride (PVDF) membranes were prepared via supercritical CO 2 induced phase separation. The effects of solvent power on PVDF membrane morphology and polymorphism were investigated using N-N -dimethylformamide (DMF), triethyl phosphate (TEP), and their mixture respectively. The morphology evolution including cross-section and surfaces were thoroughly studied by scanning electron microscope (SEM) and atomic force microscopy (AFM). The differences of solubility parameters between the solvent and PVDF affected the phase separation and the resultant morphology. The various crystalline phases of the membranes were mainly investigated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffractometer (XRD). Solvent with larger dipole moment tended to form polar β phase. Decreasing the difference of solubility parameters favored the formation of α phase. Furthermore, the effects of salt additive on PVDF membrane morphology and crystalline form were studied as well. Results turned out that lithium chloride (LiCl) induced a porous top surface and boosted the formation of β phase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131 , 41065.
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2013
·
IF 3.365
Jiangfeng Yang,Rajamani Krishna,Junmin Li,Jinping Li
Separation of CO 2 from CH 4 is needed in order to use low-quality biogas or landfill gas and to reduce greenhouse gas emissions. To study the separation of a CO 2 /CH 4 gas mixture , K-KFI (Si/Al = 4.59) sorbent was synthesized and pelletized. We performed breakthrough experiments at flow rates of 16.6 and 30 N mL/min under ambient temperature and pressure (298 K, 100 kPa). The breakthrough experiments results showed that K-KFI separated a 40%/60% mixture of CO 2 /CH 4 better than a 50%/50% mixture. Furthermore, the separation performance of K-KFI is superior to that of commercial sorbents zeolite-5A and 13X under the same conditions. Simulations of the breakthrough of binary mixed gases CO 2 /CH 4 = 40%/60%, yield results that are in good agreement with our experimental data. By performing breakthrough simulations at a total pressure of 2 MPa, we demonstrated that pure CH 4 can be separated from CO 2 /CH 4 gas mixtures under high pressure, and that pure CH 4 can be recovered in the initial stages of the breakthrough.
✓ 已验证
DOI
高影响因子
Natural Resources Research
·
2023
·Vol. 32
·期 3
·1319-1338
·
IF 5.4
Zheng Yangfeng,Zhai Cheng,Chen Aikun,Sun Yong,Cong Yuzhou,Tang Wei,Xu Jizhao,Yu Xu,Zhu Xinyu,Li Yujie
The microstructure of bituminous coal can be changed significantly due to injection of CO 2 foam fracturing fluid into the coal seam, affecting CBM production efficiency. To investigate the microstructural change characteristics of bituminous coal treated with high-pressure CO 2 foam fracturing fluid at different treatment times (0–24 h), medium-rank bituminous coal was selected as the research object. X-ray diffraction, Fourier transform infrared spectroscopy, and low-temperature N 2 adsorption tests were carried out to study the changes in mineral components, functional groups, micropore structure, respectively. It was found that the pore structure of bituminous coal can be changed by CO 2 foam fracturing fluid. With increase in modification time, the proportion of macropore (> 50 nm) volume of bituminous coal increased gradually, while the proportion of pore (2–5 nm) volume showed a trend of “increase rapidly–decrease rapidly–decrease slowly.” When the modification time was within 6–24 h, the average pore size showed a quadratic polynomial positive correlation with treatment time, the seepage pore fractal dimension ( D 1 ) decreased linearly with increase in modification time, and the adsorption pore fractal dimension ( D 2 ) showed the opposite trend. Moreover, with increase in modification time, the infrared peak area of oxygen-containing functional groups and aromatic, aliphatic, and hydroxyl structures of bituminous coal showed a trend of “decrease rapidly–decrease slowly,” the aromaticity and degree of aromatic ring condensation showed “decreasing–increasing–decreasing” trends, and the aliphatic chain length and oxygen-containing functional groups fluctuated and increased. CO 2 foam fracturing fluids significantly dissolve clay and carbonate minerals in bituminous coal. Coal microstructure can be changed by CO 2 foam fracturing fluid through hydrocarbon extraction and transport, differential swelling, and mineral dissolution. The findings showed that 18–24 h was the optimal time range for fracturing fluid flowback after performing CO 2 foam fracturing measurements. The research results are significant for selecting CO 2 foam fracturing fluid flowback time and improving CBM recovery.
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2022
·
IF 6.633
Tingting Chen,Tingting Chen,Xiaorong Wu,Yingjie Xu
Six hydroxypyridine anion-based protic ionic liquids (PILs) were synthesized by equimolar proton transfer of hydroxypyridine with superbase 1,8-diazabicyclo-[5,4,0]undec-7-ene (DBU) or 1,1,3,3-tetramethylguanidine (TMG), namely [DBUH][2-OP], [DBUH][3-OP], [DBUH][4-OP], [TMGH][2-OP], [TMGH][3-OP], and [TMGH][4-OP], and their physicochemical properties including density ( ρ ), viscosity ( η ), and speed of sound ( u ) were measured at T = 293.15–343.15 K to derive thermal expansion coefficient ( α p ), activation energy for viscous flow, and isentropic compressibility, respectively. CO 2 absorption behavior of PILs at 313.2 K and 101.3 kPa was determined. Effects of the structure on their physicochemical properties and CO 2 absorption were discussed. The results show that the stronger electrostatic interaction and hydrogen bonding originated from the cations with cyclic structure and the anions with long distance between O − and N lead to the lager ρ , η , and u , exhibiting the sequence of [4-OP] − > [3-OP] − > [2-OP] − and [DBUH] + > [TMGH] + . While CO 2 capture behavior of PILs mainly depends on η , α p and the alkalinity, which are related to the position of O − in anions. When O − appears in the ortho position of N atom, PILs with [2-OP] − have larger free volumes, stronger alkalinity, and lower η , showing excellent carbon capture performance. Additionally, absorption mechanism proved by NMR and FT-IR spectra demonstrates that CO 2 can chemically interact with O − in anion to form the carbonate. In comparison, [DBUH][2-OP] is a good candidate for efficient CO 2 capture. Accordingly, physicochemical properties and CO 2 absorption behavior of can be efficiently regulated by tuning their structure, especially the position of O − in the anions.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 113
·112184-112192
·
IF 3.289
Pengke Huang,Yongyan Pang,Lihua Zhang,Fei Wu,Shuhai Zhang,Wenge Zheng
The objective of this study was to explore a new approach to enhance the flame retardancy of polypropylene/intumescent flame retardant (PP/IFR) composites through improving IFR dispersion via continuous extrusion with supercritical carbon dioxide (scCO2) as the processing medium. The IFR used in this study consisted of ammonium polyphosphate (APP) and pentaerythritol (PER) at a weight ratio of 3 : 1. Scanning electron microscopy (SEM) was applied to study the dispersion of IFR in the PP composites prepared in the presence of different contents of scCO2. Thermogravimetric analysis (TGA) was carried out to study the effect of IFR dispersion on the thermal stability and the yield of char residues of the PP composites. A plastic smoke generation tester was applied to study the specific optical density under a thermal irradiance. SEM was then used to study the morphologies of the intumescent char formed after the smoke testing. Limiting oxygen index (LOI) and vertical burning test (UL-94) ratings were evaluated to study the effect of IFR dispersion on the flame retardancy of the PP composites. It was found that scCO2 as the processing medium could significantly improve IFR dispersion and thus increase the efficiency of the flame retardant and enhance the flame retardancy of the PP composites. This new approach could allow PP composites to pass the UL-94 V-0 rating at a lower IFR content. Possible mechanisms were proposed for the scCO2-aided IFR dispersion and the improved flame retardancy of the PP composites.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Xiaoyue Ren,Heng Li,Hao-Yang Mi,Yahao Guo,Xin Jing,Binbin Dong,Chuntai Liu,Changyu Shen
Superhydrophobic foams are promising substances for removing leaked oil from water. However, producing superhydrophobic foams with stable high performance using a low-cost, scalable, and environmentally friendly means is a challenge. Herein, superhydrophobic nanocomposite foams comprising of ultra-high molecular weight polyethylene (UHMWPE) and modified silica nanoparticles (NPs) were developed using melt blending and supercritical CO 2 foaming. Long carbon chains grafted on silica NPs formed a shell with a thickness of 100 nm, which rendered the NPs hydrophobicity and generated entanglements with UHMWPE matrix. The optimum foam with an average cell size of 41.5 μm achieved a high water contact angle of 158.2 ± 1° and a low sliding angle of 1.7 ± 0.4°, attributing to the micro-nano hierarchical structure constructed by the porous structure and the modified NPs. The foam remained superoleophilic and demonstrated high efficiency in separating both light and heavy oils from water. A relatively high oil absorption capacity of 2.8 to 7.2 g/g was achieved towards various oils and solvents, and separation efficiency of over 99 % could be maintained after ten cycles of reuse. This work provides a facile and scalable method to produce superhydrophobic UHMWPE nanocomposite foams with stable high performance for effective oil absorption from water.
研究领域:
材料科学
·
环境工程
·
聚合物纳米复合材料
·
绿色化学
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2019
·
IF 7.149
Lidong Wang,Shanshan Liu,Rujie Wang,Qiangwei Li,Shihan Zhang
Biphasic solvents containing mixed amines have a phase separation behavior and energy-efficient regeneration for CO2 capture. However, the trade-off between the CO2 absorption capacity and the volume ratio of the CO2-rich phase presents a critical challenge to the reducing potential in regeneration energy consumption. In this study, sulfolane was proposed to regulate the phase separation behavior of a N,N-diethylethanolamine (DEEA)–triethylenetetramine (TETA) biphasic absorbent by simultaneously decreasing the volume ratio and increasing the CO2 loading of the rich phase, without sacrificing the high CO2 capacity. In the DEEA–TETA–sulfolane biphasic absorbent, sulfolane acted as a phase splitter and physical activator. The replacement of a part of H2O by hydrophobic sulfolane contributed to a substantial decrease in the volume ratio of the rich phase from 83 to 39% and an increase in CO2 loading of the rich phase from 3.10 to 4.92 mol/L. The regeneration heat decreased to 1.81 GJ/t CO2, 26.4% less than DEEA–TETA, and 54.6% less than the 5 M monoethanolamine system. Moreover, by promoting the mass transfer coefficient of CO2 in DEEA–TETA–sulfolane to 1.8 times the original DEEA–TETA system, sulfolane was validated as a physical activator. Our study provides a promising strategy for regulating the phase separation behavior of biphasic solvents and enhancing the regeneration energy efficiency for CO2 capture.
研究领域:
化学工程
·
碳捕集与封存
·
分离科学
·
能源效率
✓ 已验证
DOI
高影响因子
APPLIED ENERGY
·
2015
·
IF 5.613
Zhi-Ming Xia,Xiao-Sen Li,Zhao-Yang Chen,Gang Li,Ke-Feng Yan,Chun-Gang Xu,Qiu-Nan Lv,Jing Cai
Treatment and subsequent use of biogas are garnering huge interest for both energy recovery and mitigation of environmental impact. However, separation process is pivotal for increasing its calorific value and removing CO 2 . This work presents the kinetic and separation efficiency study as well as microcosmic structure analysis for purifying simulated biogas (45.0 mol% CO 2 /CH 4 binary mixture) through hydrate crystallization approach. Particularly, synergic additives comprise gas solvent (dimethyl sulfoxide (DMSO)) and traditional hydrate promoter (tetrahydrofuran (THF) or tetra-n-butyl ammonium bromide (TBAB)) were proposed to enhance the hydrate-based separation process. The promotion mechanism was explored through in-situ Raman spectroscopy. The residual gas phase and the decomposition gas phase from the hydrate slurry were sampled and analyzed. Based on the experimental data, the gas storage capacity, unit system gas consumed rate, gas selectivity and separation efficiency were calculated for evaluating the separation process. It was found that, the synergic additives could promote the mixture hydrate formation process due to DMSO (acid gas solvent) could improve both rate and selectivity of CO 2 during the dissolution and diffusion processes. In addition, the Raman analysis reveals that the simulated biogas forms structure II hydrate and semiclathrate framework with THF–DMSO and TBAB–DMSO respectively, and CH 4 molecules are only found in the smaller (5 12 ) cages of the mixture hydrates. It is inferred that DMSO just performs as an acid gas solvent during the gas dissolution and diffusion processes but not participate in the hydrate framework formation. It will be of practical interest in relation to resolving the bottleneck of hydrate-based biogas purification technology and of potential importance for the industry application of gas hydrate.
研究领域:
能源工程
·
环境科学
·
气体分离技术
·
水合物化学
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2016
·
IF 5.393
Qiancheng Zhu,Shibi Zeng,Ying Yu
Nowadays, capturing anthropogenic CO2 in a highly efficient and cost-effective way is one of the most challenging issues. Herein, the key parameters to stabilize CO2 uptake capacity have been studied based on four kinds of pure calcium oxides (CaO) prepared by a simple calcination method with four different calcium precursors. A simple ideal particle model was proposed to illustrate the uniform distribution of pure CaO, in which the CO2 uptake capacity is positively related with surface area of CaO particles and the stability is opposite to the distance between two CaO particles after carbonation. The adsorption capacity of the best sample with a distance of 398 nm between two CaO particles after carbonation only lost 0.344% per cycle, which is originated from the low possibility of the agglomeration between neighboring particles. On the basis of the proposed model, the composite with magnesium oxide (MgO) distributed uniformly in CaO was fabricated by a simple ball milling method, which possessed an excellent stability with a decay rate of only 3.9% over 100 carbonation–calcination cycles. In this case, MgO played as inert to increase the distance between CaO particles for agglomeration prevention.
研究领域:
碳捕集与封存
·
材料科学
·
化学工程
·
可持续能源
✓ 已验证
DOI
高影响因子