SENSORS AND ACTUATORS A-PHYSICAL
·
2026
·
IF 5.1
Jing-Wen Liu,Yan Li,Gang-Long Song,Xiao-Xue Lian
Listeria monocytogenes is a life-threatening foodborne pathogen, and indirect detection via its specific metabolite 3-hydroxy-2-butanone has emerged as a validated strategy. However, reliable early monitoring of LM requires rapid response kinetics for real-time analysis and high selectivity against food-derived volatile organics, and achieving both simultaneously at the ppb level remains a significant challenge. Herein, we have synthesized Fe-doped ZnO nanofibers and the introduction of Fe induces the formation of a mixed Fe 2 + /Fe 3+ valence that facilitates dynamic redox cycling, thereby enhancing charge transfer efficiency and creating additional active sites to improve gas-sensing performance. Systematic gas-sensing evaluations showed that the 0.5% Fe-doped ZnO sensor exhibits an optimal response of 168.9–100 ppm 3H-2B at 170 °C, with a rapid response time of 2 s and a low detection of 110 ppb, significantly outperforming the undoped ZnO and higher Fe-doped counterparts. X-ray photoelectron spectroscopy confirmed the coexistence of Fe 2+ /Fe 3+ , whose dynamic redox cycles enhanced electron exchange between the nanofibers and 3H-2B, thereby boosting sensing performance. This study offers an economical method for 3H-2B detection and demonstrates variable-valence Fe is a potential dopant to tailor ZnO-based gas sensors toward food safety and environmental applications.
✓ 已验证
DOI
高影响因子
COMBUSTION AND FLAME
·
2026
·
IF 5.9
Tengyue Song,Yuhuai Shi,Shuhan Guo,Ying Kang,Peijia Li,Yuhao Wu,Xiong Cao
The development of highly efficient catalysts for regulating thermal decomposition and combustion behavior of energetic components is of great significance. This study successfully designed, synthesized and characterized a series of nickel-iron layered double oxide doped graphitic carbon nitride (NFL@CN-X, X = 1, 3, 5) composite combustion catalysts with varying Ni/Fe molar ratios through electrostatic self-assembly followed by thermal treatment. These catalysts exhibit well-developed porous structures and highly active metal centers. The effects of these catalysts on the thermal decomposition behavior of Ammonium perchlorate (AP), Cyclotrimethylene trinitramine (RDX), Cyclotetramethylene tetranitramine (HMX) and Hexanitrohexaazaisowurtzitane (CL-20) were systematically investigated using differential scanning calorimetry (DSC) and thermogravimetric (TG) analyses, and relevant kinetic and thermodynamic parameters were calculated. In addition, the optimal catalyst was employed for ignition experiments, and high-speed camera technology was employed to evaluate their impact on the combustion performance of various energetic composite systems. Furthermore, a potential catalytic mechanism was proposed using HMX as a representative energetic compound, based on thermogravimetric-mass spectrometry (TG-MS) analysis. The DSC and TG results revealed that the incorporation of NFL@CN-X ( X = 1, 3, 5) significantly lowered the peak decomposition temperatures (T p ) of AP, RDX, HMX and CL-20 by 73.6∼81.0 °C, 1.3∼2.4 °C, 1.1∼1.5 °C, and 5.1∼7.7 °C, respectively. Correspondingly, the apparent activation energies (E a ) of the energetic composite systems markedly reduced by 113.41∼140.86 kJ·mol −1 , 3.44∼29.85 kJ·mol −1 , 32.73∼134.58 kJ·mol −1 , and 49.77∼66.74 kJ·mol −1 compared with those of the raw samples, respectively. Among these, NFL@CN-5 exhibited the most pronounced catalytic thermal decomposition effect and also significantly enhanced combustion characteristics and energy release efficiency of energetic composite systems. Ignition experiments further demonstrate that energetic systems incorporating NFL@CN-5 exhibit increased flame heights, prolonged combustion durations, and more complete combustion behavior. The NFL@CN series catalysts show great potential as superior alternatives to conventional combustion catalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.6
Yu Wang,Danyang Wu,Jiao wu,Xizhen Zhang,Yongze Cao,Baojiu Chen
We breakthrough the conventional high-temperature paradigm for synthesizing transition metal catalysts by discovering 500 °C as a critical metastable window in ultrafast (>1500 °C/s) Joule heating synthesis. This kinetically confined thermal shock at precisely 500 °C uniquely terminates metal aggregation while locking abundant pyridinic-N sites (2.86 at.%) that effectively anchor highly dispersed Fe and Co species, simultaneously sculpting a defect-rich carbon matrix. This unique combination, inaccessible in traditional pyrolysis, unlocks exceptional synergistic activity. Consequently, the 500 °C-engineered NC-FeCo catalyst achieves an oxygen reduction record: half-wave potential (0.92 V) surpassing Pt/C (0.85 V) and 1500 °C-treated analogs (0.85 V), while delivering near-theoretical 4e − selectivity (<1.2% H₂O₂), negligible decay (ΔE = 3 mV/5000 cycles), and superior methanol tolerance. Our work establishes sub-second 500 °C thermal shock as an innovative platform for metastable dual-metal electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Guo Chen,Guang-Zhen Wan,Juan Chen
The escalating global consumption of Traditional Chinese Medicine (TCM) necessitates robust quality control, particularly against contaminants like highly toxic hexavalent chromium (Cr(VI)), which must be distinguished from its essential trivalent counterpart (Cr(III)). In this study, a novel nanozyme-based colorimetric assay is presented for chromium detection, utilizing a zeolitic imidazolate framework-67 encapsulated iron-quercetin nanocomposite (Fe-QueNPs@ZIF-67). The core-shell nanostructure was synthesized through a facile one-pot method at room temperature, in which the ZIF-67 shell served as a sacrificial template to prevent agglomeration of the core Fe-QueNPs, thus preserving their intrinsic catalytic activity. In a buffer medium, the ZIF-67 framework disassembled, uniform dispersing Fe-QueNPs uniformly and releasing Co 2+ ions. A bimetallic complex was formed through synergistic coordination of Co 2+ with Fe 3+ and quercetin ligands, significantly enhancing the peroxidase-like activity of nanozyme. This improved catalytic activity promoted the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by H₂O₂. Importantly, a differential response to chromium species was observed: the catalytic reaction was inhibited by Cr(III), leading to signal reduction, whereas it was promoted by Cr(VI), resulting in signal amplification. This dual-response modulation enabled selective and sensitive quantification of Cr(III) (linear range: 10–1000 μM, LOD: 8.8 μM) and Cr(VI) (linear range: 0.5–70 μM, LOD: 0.36 μM). The method was successfully applied to TCM samples, achieving excellent recoveries (95–105%). This work provides a robust and sensitive platform for chromium speciation, offering a promising tool for quality control of herbal medicines and broader environmental monitoring.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Bo Shen,Yuxin Hui,Qi Wang,Fei Wang,Derek Hao,Huayue Zhu,Liguo Shen,Hao Du
Photocatalytic three-electron oxygen reduction (3e - ORR) can convert dissolved O 2 into •OH via coupled 2e - /1e - steps, bypassing external H 2 O 2 dosing and the kinetic bottleneck of conventional photo-self-Fenton (PSF) systems. Here, Fe-substituted phosphomolybdate clusters (FePMo) are anchored on a biomass-derived hierarchical tubular carbon (HTCC) to form an HTCC/FePMo heterojunction (HFe) that drives a visible-light self-Fenton process. For tetracycline (TC, 10 mg L −1 ), HFe achieves 99 % removal within 120 min at unadjusted pH 0 = 5.8 ( k obs = 0.026 min −1 ) and 3.6–7.7-fold higher mineralization than either component, while retaining high activity from pH 3–9 and in saline water, natural surface water, and secondary effluent. In a continuous-flow reactor, an HFe/PVDF membrane (0.64 mg cm −2 loading; 2 mL min −1 , HRT 1.23 min) sustains > 90 % TC removal for 120 h. Ecotoxicity is alleviated, with inhibition-zone diameters shrinking from ∼2.3 to ∼0.8 cm ( S. aureus ) and from ∼1.25 to ∼0.7 cm ( E. coli ), and wheat-leaf Fv/Fm recovering to ∼0.73, comparable to the water control. The energy demand is low (EE/O = 0.0031 kWh L −1 ; EE/M = 0.31 kWh g −1 ), supporting a scalable, sustainable route for advanced treatment of refractory wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4.2
Kaifa Liu,Yingzi Huang,Xin Wang,Zhi Ling,Di Chen,Fengying Yan,Beili Pang,Qian Zhang,Jianhua Yu,Liyan Yu,Lifeng Dong
The performance of zinc–air batteries (ZABs) is often hindered by the limited activity and sluggish kinetics of bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this work, a high-performance bifunctional catalyst (FeCo-NC@rGO) was synthesized by anchoring ZIF-derived Co5.47N and CoFe nanoparticles (NPs) onto a reduced graphene oxide (rGO) aerogel, accompanied by in situ growth of carbon nanotubes (CNTs). The M–N–C sites within the carbon matrix provide abundant ORR active centers, while Co5.47N and CoFe NPs impart excellent OER activity. As a result, FeCo-NC@rGO exhibits a high ORR half-wave potential of 0.85 V (vs. RHE) and a low OER overpotential of 400 mV at 10 mA cm−2, outperforming Pt/C (0.82 V) and RuO2 (508 mV), respectively. A liquid ZAB using this catalyst achieves an open-circuit voltage of 1.51 V, a power density of 114.6 mW cm−2, a specific capacity of 838.2 mAh g−1, and stable cycling for 250 h. The solid-state ZAB also demonstrates strong performance with excellent durability. This study provides an effective and scalable strategy for developing advanced bifunctional electrocatalysts for high-performance ZABs.
✓ 已验证
产品关联
DOI
高影响因子
Environmental Progress & Sustainable Energy
·
2026
·
IF 2.3
Yan Hao,Jiayuan Yue,Qianxing Lu,Ke Chen,Xinran Qian,Xiudan Hou,Shushu Ding,JieJia Li,Qing Zhu,Huixiao Duo
The existence of highly effective antibacterial agents such as triclosan (TCS) in terrestrial environments and even the human body results in increasing ecological and public health risk due to their potential toxicity. Here, a series of magnetic porous carbon spheres derived from Zr/Fe-based bimetallic organic framework, denoted as Zr/Fe-MOF@C, were developed for the efficient removal of triclosan (TCS) from water. The Zr/Fe-MOF@C demonstrated enhanced adsorption performance for TCS with a maximum adsorption capacity of 769.23 mg/g in 30 s. This value is ~10 times higher than that of many previously reported materials, demonstrating a significant advancement. The adsorption isotherms and kinetics of TCS on Zr/Fe-MOF@C were best described by the Langmuir and pseudo-second-order models, respectively. The thermodynamic analysis confirmed that the TCS removal process was favorable, spontaneous, and exothermic. Notably, Zr/Fe-MOF exhibited exceptional regenerative stability, retaining adsorption capacity of 308–410 mg/g over four consecutive adsorption–desorption cycles. The removal mechanism of TCS by Zr/Fe-MOF@C is primarily attributed to the synergistic effects of π-π stacking interaction, hydrophobic interaction, and pore filling effects. Given its rapid adsorption kinetics, excellent removal capacity, and convenient recyclability via external magnets, Zr/Fe-MOF@C emerges as a promising adsorbent for TCS removal from surface water, highlighting its strong potential for practical applications in real-water treatment.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2020
·Vol. 45
·期 20
·11802-11813
·
IF 4.939
Ping Li,Qiyu Yang,Han Zhang,Mingxuan Yao,Fei Yan,Dong Fu
Fe-, Ni- and Zn- doped La 0·9 Sr 0·1 CoO 3 are prepared and a single-component solid oxide fuel cell composed of 30 wt% perovskite oxide and 70 wt% samarium-doped ceria (SDC)-(Li 0·67 Na 0.33 ) 2 CO 3 is fabricated and characterized. When doping with either Fe, Ni or Zn, most cations occupy the Co 3+ sites. X-ray photoelectron spectroscopy and oxygen temperature-programmed desorption characterizations show that Zn-doped La 0·9 Sr 0·1 CoO 3 exhibits notably high surface oxygen, causing higher catalytic activity for oxygen reduction reaction (ORR) than that of nondoped La 0·9 Sr 0·1 CoO 3 . Fe or Ni doping into La 0·9 Sr 0·1 CoO 3 decreases surface oxygen, resulting in a lower catalytic activity toward ORR than La 0·9 Sr 0·1 CoO 3 . Furthermore, X-ray diffraction, temperature-programmed reduction and transmission electron microscopy characterizations prove that after reduction, Fe-doped La 0·9 Sr 0·1 CoO 3 is reduced to Co 0·72 Fe 0.28 alloy-oxide core-shell nanoparticles , resulting in a high catalytic activity for hydrogen oxygen reaction (HOR). However, NiCo 2 O 4 are formed during the reduction of Ni-doped La 0·9 Sr 0·1 CoO 3 , exhibiting a low catalytic activity for the HOR. Similarly, the low catalytic activity of reduced Zn-doped La 0·9 Sr 0·1 CoO 3 for the HOR is caused by the formation of ZnCo 2 O 4 . A single component fuel cell composed with Fe-doped La 0·9 Sr 0·1 CoO 3 -SDC-(Li 0·67 Na 0.33 ) 2 CO 3 exhibits the highest P max of 239.1 mW cm −2 at 700 °C with H 2 as fuel, indicating that HOR processes are rate-determining steps.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Shiyu Wu,Yao Zhang,Peng Liu,Xiaolei Zhang,Xincheng Cao,Junming Xu
The development of non-noble metal catalysts for the selective hydrogenation of long-chain fatty acids into value-added chemicals remains a significant challenge. Here, an efficient Fe@Fe 3 O 4 catalyst enriched with oxygen vacancies and weak Lewis acid sites was obtained by tuning the reduction temperature. The catalyst enabled complete conversion of stearic acid with a 97.3 % yield of octadecanol under mild conditions, and maintained high activity after 19 cycles. Moreover, when stearic acid was completely converted to alkanes, the yield of octadecane via the hydrodeoxygenation pathway (97.4 %) was markedly higher than that of heptadecane via the decarbonylation pathway (2.6 %), indicating the catalyst's excellent carbon atom utilization efficiency. Mechanistic studies revealed that metallic Fe efficiently dissociates H 2 to generate active hydrogen, while oxygen vacancies and weak Lewis acid sites in Fe 3 O 4 promote carbonyl adsorption and activation. In addition, weak Lewis acid sites interact with the carbonyl oxygen to moderately polarize the C O bond, thereby suppressing undesired C C cleavage. These synergistic effects account for the catalyst's high activity and selectivity, providing guidance for the design of advanced non-noble metal catalysts for fatty acid hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2026
·
IF 7.9
Hengxin Liu,Ruohan Li,Yueming Han,Yuntao Guan,Lixun Zhang
Intensive rice cultivation faces the dual challenges of low nitrogen use efficiency and heavy metal pollution risk. In this study, a previously developed magnesium–iron layered double hydroxide-loaded biochar (Mg/Fe-LDH@BC) composite was evaluated in paddy soil to determine its effects on nitrogen retention, heavy metal activity, crop growth and bacterial community organization. With the addition of the 1% Mg/Fe-LDH@BC, NH 4 + −N retention increased by 41.7% while NO 3 - −N accumulation decreased by 9.8%. Meanwhile, NH 3 volatilization decreased by 24.2%, and N 2 O emissions were reduced by over 50%. These changes were accompanied by increased rice biomass and grain dry mass, together with decreased concentrations of multiple geochemically reactive metals. Microbial community analysis showed that this material reshaped the topology of the bacterial co-occurrence network. The 1% Mg/Fe-LDH@BC material formed the most complex network (1446 nodes and 11,063 edges) and shifted key species from slow-growing groups (such as Syntrophus ) to metabolically active groups associated with carbon, iron, and sulfur cycles (e.g., Streptomyces , Pelobacter , and Thiobacillus ). This network exhibited both high connectivity and a highly modular structure, indicating a more interconnected and compartmentalized pattern of microbial associations. Furthermore, the porous structure of BC may create micro-anaerobic niches that support the survival of anaerobic taxa (e.g., Anaerolinea ). Although the LDH can directly immobilize heavy metals through physicochemical mechanisms, sulfur cycle-related bacteria (e.g., Desulfatitalea ) were identified as key species in the network, suggesting that microorganisms may contribute to in situ heavy metal immobilization through sulfide production.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Wenlin Zhang,Shaoyue Chen,Lu-Hua Zhang,Fengshou Yu
The development of Fe single-atom catalysts has gained attention as a promising replacement for commercial Pt/C in the oxygen reduction reaction (ORR). However, transition-metal single-atom electrocatalysts generally suffer from sluggish catalytic kinetics due to unfavorable electronic structures and inappropriate adsorption strengths toward oxygen-containing intermediates. Herein, an atomically dispersed Fe catalyst supported on a three-dimensional porous carbon (FeNC/S) with sulfur incorporated into the carbon matrix was successfully synthesized. Experimental analyses combined with theoretical investigations confirm that S introduction modulated the electronic structure of the Fe active sites, inducing a transition in the Fe d-orbital spin state from a low-spin configuration (t2g6 eg0) to an intermediate-spin configuration (t2g5 eg1). The resulting intermediate-spin Fe sites enhance O2 activation and the adsorption of ORR intermediates, accelerating the ORR kinetics. Consequently, the FeNC/S catalyst displayed markedly enhanced ORR performance over commercial Pt/C, achieving a half-wave potential of 0.904 V. Additionally, the FeNC/S catalyst delivered a notable power density of 168 mW cm−2 upon application in an alkaline Zn−air battery, and stable operation was maintained for 200 h.
✓ 已验证
DOI
高影响因子
JOM
·
2026
·
IF 2.3
Zhang Jie,Liu Aimin,Zhao Yuan,Ao Xianze,Shi Zhongning
To address the urgent need for metal and oxygen extraction in lunar in-situ resource utilization (ISRU), this study investigates electrowinning of metals and oxygen production using NaF-AlF 3 as the solvent, highland-type simulated lunar regolith (NEU-2) as the solute, a 43Fe-57Ni alloy as the anode, and graphite as the cathode, within the temperature range of 1223–1243 K. The results show that increasing the temperature from 1223 K to 1243 K reduces the cell voltage from 4.96 V to 4.80 V. The cathode product is an Al-Si-Fe alloy, in which the aluminum content first decreases and then increases with rising temperature, while silicon exhibits the opposite trend. Under the optimized condition of 1233 K, the oxygen generation rate reaches 3.22 g/h, with an oxygen yield of 16.1%, while the anode current efficiency is 80.19%. The cathode alloy composition is 54.21% Al–28.7% Si–17.09% Fe, with a cathode current efficiency of 47.70% and a Vickers hardness of 59.4 HV; the anode passivation layer remains intact under this condition. This work provides theoretical and data-based support for optimizing key process parameters in molten-salt electrolysis of lunar regolith for oxygen production.
✓ 已验证
DOI
高影响因子