CARBOHYDRATE POLYMERS
·
2025
·
IF 12.5
Yan Zhu,Shiyuan Yang,Jia Zhou,Zixiao Zhang,Yue Hu,Qingyu Xu,Yuning Zhou,Yuanjin Xu
The healing process of diabetic wounds is notably impeded due to reduced cellular functions, impaired vascularization, and persistent malignant inflammation, posing a significant obstacle in clinical management. Herein, a novel injectable multifunctional composite hydrogel (CMCSMF/QCT-Cu) with photo−/glucose-/ROS-responsivity was fabricated for enhancing diabetic wound healing which could be adapted to the local irregular anatomical shape as well as the microenvironment of high glucose and oxidative stress. Furthermore, experimental evidence has demonstrated that the CMCSMF/QCT-Cu composite hydrogel displays superior mechanical properties, with a storage modulus exceeding 700 Pa and an average adhesion strength of approximately 12.5 kPa, thereby enabling the hydrogel to effectively prevent external irritation and exhibit rapid hemostatic effects after injection. Moreover, this composite hydrogel exerted excellent collective functions including remodeling the homeostasis of fibroblast, accelerated angiogenesis and regulating immune microenvironment, ultimately accelerating diabetic wound healing, while the immunoregulatory effect may be attributed to the activation of the PI3K-AKT signaling pathway. Overall, the innovative multifunctional composite hydrogel presents a promising potential clinical therapy for enhancing diabetic wound healing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jie Yan,Runcheng Liu,Jian Shi,Wen Yang,Shouzhen Jiang,Zihao Zhang,Mingshun Jiang
The high toxicity and bioaccumulation of heavy metal ion pollutants pose severe threats to the environment and public health. Tilted fiber Bragg grating-based surface plasmon resonance (TFBG-SPR) sensors have emerged as effective tools for heavy metal ion sensing owing to their portability and rapid response. These sensors typically feature a single plasmonic structure. And they are constrained by hardware restrictions and complex spectral analyses. Thus, these conventional designs render multicomponent detection and precise analysis challenging. To address these limitations, this study introduces a lightweight multichannel sensing platform based on a composite plasmonic TFBG structure. A two-dimensional metal–organic framework (2D MOF Cu-TCPP(Pt)) and silver nanoparticles (AgNPs) are integrated onto a gold (Au)-coated TFBG surface. This configuration enables strong coupling between the SPR and localized SPR (LSPR). Hence, the signal sensitivity is enhanced. The molecular sieve effect of the Cu-TCPP(Pt) improves the target analyte enrichment and suppresses the background interference, thereby ensuring a stable signal output. Additionally, a DNA aptamer conformational switching strategy ensures selective target analyte recognition. This platform integrates an AgNPs@Cu-TCPP(Pt)/Au/TFBG sensor, optical channel array, and real-time signal processing module and enables simultaneous detection of Pb 2+ , Cd 2+ , and Hg 2+ within 6 min, with detection limits of 0.007, 0.012, and 0.005 nM, respectively. The proposed sensor effectively mitigates background interference in complex matrices, demonstrating excellent linearity and recovery. Compared with conventional TFBG-based methods, this platform offers high sensitivity, short detection times, and enhanced robustness, and presents a novel solution for real-time multicomponent detection in complex matrices.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2021
·
IF 7.086
Da Wang,Jinli Xu,Ying Zhu,Lingsha Wen,Jiexu Ye,Yi Shen,Tao Zeng,Xiaohui Lu,Jun Ma,Lizhang Wang,Shuang Song
A novel electrode composed of Cu nanosheets constructed from nanoparticles was synthesized by in situ electrochemical derivation from the metal-organic framework (MOF) HKUST-1. The prepared derivative electrode (HE-Cu) exhibited higher Faradaic efficiency (FE, 56.0%) of electrochemical CO 2 reduction (CO 2 R) compared with that of pristine Cu foil (p-Cu, 32.3%) at an overpotential of −1.03 V vs. a reversible hydrogen electrode (RHE). HE-Cu also exhibited lower onset potential of CO 2 R as well as inhibiting the H 2 evolution reaction. Electrochemical measurements revealed that HE-Cu exhibited higher CO 2 adsorption (1.58-fold) and a larger electrochemical active surface area (1.24-fold) compared with p-Cu. Physicochemical characterization and Tafel analysis showed that stepped Cu (211) surfaces, (200) facets and Cu edge atoms on HE-Cu contributed significantly to the enhanced CO 2 R activity and/or HCOOH and/or C2 product selectivity . The FEs of HCOOH and C2 products for HE-Cu increased 1.57-fold and 10.6-fold at an overpotential of −1.19 V vs. RHE compared with p-Cu. Although CH 4 was produced on p-Cu, its formation was totally suppressed on HE-Cu due to the increase of edge sites and (200) facets. Our study demonstrates that electroreduction of MOFs is a promising method to prepare novel and stable electrochemical catalysts with unique surface structures. The fabricated derivative electrode not only promoted electrochemical CO 2 R activity but also exhibited high C2 product selectivity.
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2020
·Vol. 50
·期 1
·197-207
·
IF 4.174
Yan Zhao,Lei Li,Bo Ding,Xiu-Guang Wang,Zheng-Yu Liu,En-Cui Yang,Xiao-Jun Zhao
Decontamination of industrial wastewater containing toxic organic dye molecules and oxoanions is urgently desirable for environmental sustainability and human health. Water-stable porous metal–organic frameworks (MOFs) have emerged as highly efficient photocatalysts and/or adsorbents for water purification through controllable integration of the constitutive requirements. To reveal the inclusion anion effect of microporous MOFs on wastewater treatment, two isostructural MOFs incorporating positive charge and semiconductive characteristics, {[Cu(tpt)]·3H2O·0.5SO4}n (1) and {[Cu(tpt)]·2H2O·ClO4}n (2, tpt = 2,4,6-tris(4-pyridyl)-1,3,5-triazine), have been synthesized and employed as dual-functional materials for both dye photodegradation and oxoanion removal. The two MOFs possess the same 3-fold interpenetrating cationic backbones but are encapsulated by highly disordered sulfate or perchlorate in the open channels. These included anions have significantly tuned the hydrophilicity of the channels, extended the visible-light absorption, optimized the bandgap and decreased the conduction band potential. Under the low-energy irradiation of a 30 W LED lamp, MOF 1 has selectively and efficiently degraded rhodamine B compared to 2 with accelerated kinetics, resulting from the stronger reduction ability and less migration resistance of the photogenerated electrons. Instead, MOF 2 can quickly capture harmful MnO4− and Cr2O72− by exchanging with the entrapped ClO4−, with maximum adsorption amounts of 557 and 168 mg g−1, respectively, under ambient conditions. The improved decolorization of the aqueous solution over 2 benefits essentially from the shape and charge memory effect and the smaller hydration energy of ClO4− than SO42−. These interesting observations highlight the importance of the included anions inside the porous MOF semiconductors on wastewater treatment.
✓ 已验证
DOI
高影响因子
Journal of the Taiwan Institute of Chemical Engineers
·
2018
·
IF 3.849
Weirui Chen,Zulin Zhang,Xukai Li,Dan Wu,Ying Xue,Laisheng Li
Fe-Cu-MCM-41/O 3 was first used as an alternative to O 3 to control disinfection by-products generation from chlorinated-disinfection of Br-containing Diclofenac. Accompanying with decrease of TOC , THMs and HAAs had an initial increase, reaching the highest at 30 min, then gradually decreased. Coupling Fe-Cu-MCM-41 with O 3 successfully enhanced TOC removal and inhibited bromate, THMs and HAAs formation in post-chlorination when compared with those in ozonation . Four kinds of THMs and six kinds of HAAs were detected. CHCl 3 was main Cl-THMs and CHBrCl 2 was main Br-THMs. CHCl 2 COOH was the dominant Cl-HAAs and CHClBrCOOH was main Br-HAAs. A converse Br-THMs order was observed in O 3 and Fe-Cu-MCM-41/O 3 pre-treatment. Fe-Cu-MCM-41 decreased ozone exposure, reducing the direct reaction of O 3 with Br − to form bromate. More DBPs precursors in Fe-Cu-MCM-41/O 3 were removed by ·OH. H 2 O 2 , which generated during pre-treatment process, reduced HBrO/BrO − to Br − , inhibiting both its reaction with Br-DBPs precursors and bromate formation. The pre-treatment process changed intermediates’ properties and hydrophilic DOM was the dominant component. Hydrophobic acids and transphilic DOM were the main chlorine consuming intermediates and had major contribution to DBPs formation. Fulvic-like intermediates was suggested as precursors of Br-DBPs. Fe-Cu-MCM-41/O 3 were suggested as a good alternative to O 3 pretreatment.
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Yixuan Zhang,Guoqiang Liu,Chang Su,Guangyin Liu,Hongda Sun,Danlei Qiao,Lei Wen
This work focuses on the improvement on the electrochemical performances of Fe–Mn based oxides as cathode for sodium ion batteries by doping Cu and F elements. The synthesized doped-compounds exhibit extremely excellent electrochemical performance. For instance, it's initial discharge capacity can reach 195.6 mAh g −1 at a current density of 10 mA g −1 . Meanwhile, after 200 cycles at 200 mA g −1 , it still remains a capacity of 124.1 mAh g −1 , 87.8% of the initial capacity of 141.3 mAh g −1 . More significantly, it can deliver a high capacity of 106.4 mAh g −1 at a high current density of 1000 mA g −1 . It is found that F/Cu co-substitution obviously improve the discharge capacity and cycle stability of Fe–Mn based oxide especially at higher current densities. Doping Cu and F elements has influence on the structure and morphology of the material, which results in the improvement of charge-discharge characteristics.
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2022
·
IF 9.463
Ningle Hou,Youwei Zhao,Tian Yuan,Ling Li,Xiaoting Li,Wenming Zhang
Flexible multifunctional pressure sensors for human motion monitoring have recently attracted extensive attention. However, the preparation of a multifunctional sensor with wide coverage and high sensitivity to pressure detection remains a considerable challenge. Here, we design a flexible multifunctional pressure sensor consisting of Cu-catechol nanowire coated carbonized nanofiber networks (Cu-CAT@CNFN) sandwiched between two interlocking polydimethylsiloxane doped with ZnS:Cu (ZnS:Cu/PDMS) composite electrode films. Due to the pressure concentration between the interlock micromastoid arrays and the thicker pressure sensitive layer, the pressure sensors demonstrate a high sensitivity of 45.40 kPa −1 , pressure detection coverage of 0 to 110 kPa, a response time of 0.166 s, outstanding cyclic stability of 5,000 cycles and visualization of the pressure. Furthermore, the pressure sensor can be used to detect pulses, wrist and elbow bending, and finger press. The excellent performance of the pressure sensor demonstrates its application potential in the next generation of wearable electronics.
✓ 已验证
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2022
·
IF 6.267
Guannan Yang,Quanzhen Li,Zehua Tang,Yujie Zeng,Yu Zhang,Jinfeng Li,Chengqiang Cui
In this work, we propose a capillarity-promoted laser re-sintering method of printed semisolid Cu nanoparticles for facile fabrication of conductive patterns with voidless structure and improved conductivity. Conductive circuits with a thickness of 5 μm are fabricated. By using a semisolid Cu particle paste instead of a dry paste, a more compact sintered structure is obtained, and the resistivity is reduced from 18 to 9.2 μΩ cm. Thermal diffusion tests reveal that the semisolid paste exhibits a much higher thermal diffusion coefficient (∼7 × 10 −6 m 2 /s) than the dry paste (∼3 × 10 −6 m 2 /s). Through four repeated laser scannings, the fully sintered layer on the upper surface of the circuits thickens and transits into a solid structure without internal voids. The resistivity is further reduced to 3.8 μΩ cm, which is only two times that of bulk copper. The capillary phenomena of the semisolid paste also promotes the closure of large-scale voids. These effects drive the improvement of the properties and formable thickness of the sintered circuits. These findings could provide new experimental basis for structure and property modifications of printed circuits by similar techniques.
✓ 已验证
DOI
高影响因子
Frontiers in Marine Science
·
2021
·
IF 4.912
Han Xiaoxin,Wang Shiyu,Yu Xue,Vogt Rolf D.,Feng Jianfeng,Zhai Lifang,Ma Weiqi,Zhu Lin,Lu Xueqiang
Due to its small size, large specific surface area and hydrophobicity, microplastics, and the adsorbed contaminants may together cause potential negative effects on ecosystems and human beings. In this study, kinetics and size effects on adsorption of Cu(II), Cr(III), and Pb(II) onto PE, PP and PET microplastic particles were explored. Results indicated that the PE and PET microplastics have the higher adsorption capacity for Cu(II), Cr(III), and Pb(II) than that for PP microplastic. The adsorption capacity was affected by microplastic types and metal species. Among the three metals, Pb(II) had the largest adsorption amount on microplastic particles, especially on PET particles. Moreover, the adsorption capacities of microplastics increase with the decrease of particle size. The metal adsorption capacity of <0.9 mm microplastics is greater than that of 0.9–2 mm and 2–5 mm microplastics. The size effect on metal adsorption was largest for PE microplastic. More attention should be paid in case of the coexistence of heavy metals and tiny PE and PET microplastics in the environment.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2019
·Vol. 150
·期 3
·815-825
·
IF 2.372
Huang Yan-Feng,Zhang Lu,Ma Li,Li Ying,Zhong Chongli
Abstract Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were achieved using nanoparticle-encapsulated MOFs Fe 3 O 4 @HKUST-1 as both a precursor and a self-sacrificing template. Fe 3 O 4 @HKUST-1 was thermally converted into magnetic Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites in different atmosphere (N 2 and air). The resulting composites not only kept superparamagnetic characteristics, but also exhibited improved peroxidase-like catalytic activity and high stability when compared to the precursor Fe 3 O 4 @HKUST-1. The morphology, crystal structure, magnetic and porous properties of Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were characterized, and the kinetics parameters and the influence factors on the peroxidase-mimicking activity such as temperature, pH and H 2 O 2 concentration were evaluated. On account of the excellent peroxidase-like activity, the as-prepared Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were successfully used for the catalytic removal of methylene blue (MB) dye with H 2 O 2 oxidant. This work provides an effective way to fabricate highly reactive MOFs-derived biomimetic catalysts, which have potential applications in bioassays and pollutant degradation. Graphic Abstract Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were achieved using Fe 3 O 4 nanoparticle-encapsulated HKUST-1 as self-sacrificial templates and demonstrated excellent peroxidase-like activity.
✓ 已验证
DOI
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2024
·
IF 10.7
Chao Liu,Qing Huang
Nanozymes are potential candidates for constructing sensors due to their adjustable activity, high stability, and high cost-effectiveness. However, due to the lack of reasonable means, designing and preparing efficient nanozymes remains challenging. Herein, inspired by the property of natural laccase, we applied the novel and facile low-temperature plasma (LTP) technology to fabricate a series of different base-ligand Cu metal organic framework (MOF) nanozymes (namely, A-Cu, G-Cu, C-Cu and T-Cu nanozymes) with laccase-like activity successfully. Owing to the different catalytic capacities of four types of base-Cu-MOF nanozymes in the response to five common effective bioactive substances, we constructed the nanozyme-encoded array sensor for the identification of different bioactive compounds. As a result, the four-channel colorimetric sensor array was constructed, in which four laccase-like nanozymes were utilized as the sensing units, achieving high-throughput, high-sensitivity and rapid detection/identification of five common bioactive compounds in the concentration range of 1.5–150 μg mL −1 through different color output patterns. It is worth noting that the as-prepared sensor array can successfully distinguish the natural bioactive compounds in a variety of real samples. Furthermore, with the assistance of smartphones, we also designed a portable smart sensing approach for detecting the bioactive compounds effectively in food. This study has therefore not only provided an effective way for preparation highly effectively nanozymes, but also established a new sensing platform for intelligent sensing of bioactive components in food.
✓ 已验证
DOI
PubMed
高影响因子
Royal Society Open Science
·
2018
·Vol. 5
·期 4
·
IF 2.504
Donglin He,Huiping Zhang,Ying Yan
Cu-ZSM-5 catalysts were prepared by chemical vapour deposition for catalytic wet peroxide oxidation (CWPO) of phenol in a fixed bed reactor. Firstly, Cu-ZSM-5 catalysts with Cu loading of 0.5, 2, and 6 wt% were prepared and characterized by X-ray diffraction (XRD), N2 adsorption–desorption and X-ray photoelectron spectra (XPS). The characterization results demonstrated that CuO was uniformly dispersed on ZSM-5 with slight effect on the structure properties of the support. Then, several variables, such as the copper loading, reaction temperature, catalyst bed height and feed flow rate were investigated in the CWPO of phenol in aqueous solution at high concentration (1000 ppm). Compared with the catalyst prepared by the impregnation method, the Cu-ZSM-5 prepared by chemical vapour deposition has a better capacity of further oxidizing the intermediate organic products into carbon dioxide and water with less metal loading. Based on the Cu-ZSM-5 catalyst with Cu loading of 6 wt%, complete removal of phenol and a high TOC reduction (around 70%) have been achieved at the temperature of 80°C feed flow rate of 2 ml min−1 and catalyst bed height of 3 cm. Moreover, this catalyst maintained high catalytic activity after three runs with high phenol conversion (94%) under this optimum operating condition. Finally, the reaction mechanism was studied based on the intermediates detected by high-performance liquid chromatography (HPLC).
✓ 已验证
DOI
高影响因子