文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4009至4020个,产品总数4,590个

切换升序
C
SCIENCE OF THE TOTAL ENVIRONMENT · 2019 · IF 5.589

Limited Cu(II) binding to biochar DOM: Evidence from C K-edge NEXAFS and EEM-PARAFAC combined with two-dimensional correlation analysis

Jing Wei,Chen Tu,Guodong Yuan,Yongqiang Zhou,Hailong Wang,Jian Lu

Multiple spectroscopic technologies and chemometric analyses were combined to explore the compositional characteristics and Cu binding performance of biochar-derived dissolved organic matter (DOM). The DOM samples were extracted from biochars produced from lignocellulose-rich rapeseed cake (RSC) by pyrolysis at 300, 500, and 700 °C (i.e., RSC300, RSC500, RSC700). Fourier transform infrared spectroscopy (FTIR) and carbon K-edge near-edge X-ray absorption fine structure spectroscopy (NEXAFS) analyses were combined to elucidate the molecular-level C species in the DOM. With the increasing pyrolysis temperature, DOM aromaticity increased, whereas the proportion of metal complexing sites (e.g., carboxyl and phenolic groups) decreased. Fluorescence excitation-emission matrix (EEM) spectroscopy with parallel factor analysis (PARAFAC) indicated that biochar DOM, irrespective of pyrolysis temperature, was mostly composed of three types of humic-like components (C1–C3), and a small amount of a protein-like component (C4). As charring temperature increased, DOM concentrations decreased substantially, but the humic-like C3 with abundant aromatic structures became predominant. Fluorescence quenching experiment and two-dimensional correlation spectroscopy (2D-COS) analysis suggested that the preferential Cu(II) binding fractions of the DOM were the humic-like substances. Moreover, the quenching curve fitting results for individual components indicated that despite the Cu(II) binding affinity was slightly enhanced as the pyrolysis temperature increased, the binding capacities of the four components decreased. In general, the DOM components from RSC biochar exhibited limited Cu(II) binding capacities (2.18–17.7 μmol L −1 ). Results from this study improved understanding of the mechanisms by which biochar DOM interacts with Cu, and provided tools for fast screening of biochars to reduce their environmental risks.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2019 ·Vol. 7 ·期 8 ·3632-3641 · IF 10.733

High-loading individually dispersed NiCo2O4 anchoring on checkerboard-like C/CNT nanosheets as a binder-free high rate electrode for lithium storage

Hanwei Wang,Lintong Hu,Chao Wang,Qingfeng Sun,Huiqiao Li,Tianyou Zhai

Nanoscale transitional metal oxides (TMOs) are promising anode materials for high-performance lithium-ion batteries (LIBs), but achieving a high-load TMO electrode with excellent conductivity and good cycling stability still remains a big challenge especially for nanosized TMO particles. Herein, we report a novel strategy to prepare checkerboard-like NiCo2O4@C/CNT (N@C/CNT) nanosheets by a facile cellulose template-assisted method. The 2D, 1D and 0D ternary hybrid structures achieve individual dispersion of high-load NiCo2O4 nanoparticle (NP) “chess pieces” (diameter ∼ 25 nm) anchored on C/CNT nanosheets (thickness ∼ 50 nm), in which the CNT “grid lines” and cellulose-derived carbon “chess lattices” act as a high-speed conductive network and loading substrate, respectively. Due to the self-assembly of these nanosheets, the designed electrodes are created with no binder or other additives and possess adjustable thickness, high electrode density and a strong conductivity of 175.9 S cm−1 even at a high NiCo2O4 content of 85.1%. The binder-free electrode exhibits superior rate capabilities (1208 mA h g−1 at 0.1 A g−1 and 830 mA h g−1 at 20 A g−1) and little capacity fading at 20 A g−1 over 4000 cycles. Such a strategy enables an ultrahigh mass loading of 12.8 mg cm−2 (2.5 g cm−3) with the same time high electrochemical performances.

CAS / MDL: 308068-56-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemSusChem · 2018 ·Vol. 11 ·期 23 ·4060-4070 · IF 7.411

C@TiO2/MoO3 Composite Nanofibers with 1T-Phase MoS2 Nanograin Dopant and Stabilized Interfaces as Anodes for Li- and Na-Ion Batteries

Huimin Zhou,Xin Xia,Pengfei Lv,Jin Zhang,Xuebin Hou,Min Zhao,Kelong Ao,Di Wang,Keyu Lu,Hui Qiao,Malgorzata Zimniewska,Qufu Wei

Graphical Better anode by design : A designed anode structure combining the metallic conductivity of 1T-MoS 2 with interconnected TiO 2 /MoO 3 grains is beneficial for fast charge-transfer reactions and reduced transmission losses. Moreover, a flexible carbon framework buffers swollen lithium compounds, such as Li x MoO 3 and Li x MoS 2 , and supports the shrinking delithiated products, with potential for achieving high capacity stability in both Li- and Na-ion batteries. Integrating layered nanostructured MoS 2 with a structurally stable TiO 2 backbone to construct reciprocal MoS 2 /TiO 2 -based nanocomposites is an effective strategy. C@TiO 2 /MoO 3 composite nanofibers doped with 1T-phase MoS 2 nanograins were fabricated by partially sulfurizing MoO x /TiO 2 precursors. By controlling a suitable preoxidation temperature before severe thermolysis of polyvinylpyrrolidone (PVP), the MoO x /TiO 2 precursors formed a polymer-embedded array through coordination of the Mo source and pyrrolidyl groups of PVP. Sulfidation under water/solvent hydrothermal conditions led to partial formation of metallic 1T-phase MoS 2 from the MoO x precursor with preoxidation at 200 °C. After carbonization, the TiO 2 /MoO 3 /MoS 2 nanograins were encapsulated in a carbon backbone in a vertical pattern, providing both chemical contact for confined electron transport and sufficient space to adapt to volume changes. The obtained carbon-based platform not only has the advantages of an integral structure, but also exhibited ultrastable specific capacities of 540 and 251 mAh g −1 for Li-ion batteries and Na-ion batteries, respectively, after 100 cycles.

CAS / MDL: 12054-85-2 15060-55-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2018 · IF 4.946

Preservative effects of fish gelatin coating enriched with CUR/βCD emulsion on grass carp (Ctenopharyngodon idellus) fillets during storage at 4 °C

Xinyu Sun,Xiaoban Guo,Mingyu Ji,Jiulin Wu,Wenjin Zhu,Jianhua Wang,Cui Cheng,Li Chen,Qiqing Zhang

This study investigated the effects of a novel edible coating combining fish gelatin with curcumin/β-cyclodextrin (CUR/βCD) emulsion on the quality of grass carp fillets (GCFs) during storage at 4 °C. For all samples, the quality parameters, including weight loss, pH, total volatile basic nitrogen (TVB-N), peroxide value (PV), thiobarbituric acid (TBA) value, SDS-PAGE, free amino acids (FAA), microbiological (total viable counts (TVC), Pseudomonas counts, yeasts and molds, and H 2 S-producing bacteria), color and sensorial characteristics, were tested periodically. The coatings containing CUR/βCD emulsions exhibited better preservative effects than gelatin/βCD coating. Therefore, fish gelatin coating enriched with CUR/βCD emulsion can be used as an effective way to maintain the quality of GCF and extend its shelf life during storage at 4 °C.

CAS / MDL: 1762-95-4 128-37-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY · 2018 ·Vol. 317 ·期 2 ·959-968 · IF 1.181

Large-scale synthesis of nano Cu2O/Cu–C for iodide removal in a novel countercurrent two-stage adsorption and membrane separator system

Zhang Xiaoyuan,Gu Ping,Zhou Shishuai,Dong Lihua,Zhang Guanghui

A synthesis method was introduced for the large-scale preparation of a nano Cu 2 O/Cu-modified activated carbon composite, L-nano Cu 2 O/Cu–C. As the adsorbent, the synthesized composite could efficiently remove radioactive iodide ions (I − ) from simulated water. A lab-scale integrated novel countercurrent two-stage adsorption and membrane separator system was designed to assess the practical application of L-nano Cu 2 O/Cu–C. Stable and high I − removal efficiency was achieved during the operation of the system. The effluent met the water quality requirements, and the membrane fouling rate was lower. This study provides a potential process to treat water contaminated with radioactive I − in practical applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Frontiers in Microbiology · 2018 · IF 4.019

Differences in the Characteristics and Pathogenicity of Colletotrichum camelliae and C. fructicola Isolated From the Tea Plant [Camellia sinensis (L.) O. Kuntze]

Lu Qinhua,Wang Yuchun,Li Nana,Ni Dejiang,Yang Yajun,Wang Xinchao

Colletotrichum, the causative agent of anthracnose, is an important pathogen that invades the tea plant (Camellia sinensis). In this study, 38 isolates were obtained from the diseased leaves of tea plants collected in different areas of Zhejiang Province, China. A combination of multigene (ITS, ACT, GAPDH, TUB2, CAL, and GS) and morphology analyses showed that the 38 strains belonged to two different species, namely, C. camelliae (CC), and C. fructicola (CF). Pathogenicity tests revealed that CC was more invasive than CF. In vitro inoculation experiments demonstrated that CC formed acervuli at 72 hpi and developed appressoria on wound edges, but CF did not develop these structures. Under treatment with catechins and caffeine, the growth inhibition rates of CF were remarkably higher than those of CC, indicating that the nonpathogenic species CF was more vulnerable to catechins and caffeine. Growth condition testing indicated that CF grew at a wide temperature range of 15–35°C and that the optimum temperature for CC growth was 25°C. Growth of both CC and CF did not differ between acidic and weakly alkaline environments (pH 5–8), but the growth of CC was significantly reduced at pH values of 9 and 10. Furthermore, the PacC/RIM101 gene, which associated with pathogenicity, was identified from CC and CF genomes, and its expression was suppressed in the hyphae of both species under pH value of 5 and 10, and much lower expression level was detected in CC than that in CF at pH 6. These results indicated that temperature has more important effect than pH for the growth of two Colletotrichum species. In conclusion, the inhibition by secondary metabolite is an important reason why the pathogenicity by CC and CF are different to tea plant, although the environmental factors including pH and temperature effect the growth of two Colletotrichum species.

CAS / MDL: 154-23-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2018 · IF 8.097

Fe–N–C Artificial Enzyme: Activation of Oxygen for Dehydrogenation and Monoxygenation of Organic Substrates under Mild Condition and Cancer Therapeutic Application

Fei He,Li Mi,Yanfei Shen,Toshiyuki Mori,Songqin Liu,Yuanjian Zhang

Developing highly efficient biomimetic catalysts that directly use O2 as the terminal oxidant to dehydrogenate and monoxygenate substrates with high selectivity under mild conditions has long been pursued but rarely achieved yet. Herein, we report that heterogeneous Fe–N–C, which is commonly used as an electrocatalyst for oxygen reduction reaction, had unusual biomimetic catalytic activity in both dehydrogenation and monoxygenation of a series of organic molecules (∼100% selectivity) by directly using O2. The Fe–Nx center was verified to be the active site that reductively activated O2 by spontaneously generating specific reactive oxygen species (ROS) (1O2, O2•–, and H2O2). Aided by these ROS, under physiological conditions, the Fe–N–C was further successfully exampled to kill proliferative lung cancer cells. Fe–N–C had several striking superior features with respect to natural enzymes, classical heterogeneous nanozymes, and homogeneous artificial enzymes incapable of working under harsh conditions (extreme pH and high temperature), ease of separation and recycling, and direct use of O2. It would open up a new vista of Fe–N–C as an artificial enzyme in biomimetic catalysis, ranging from fundamental simulation of oxidase/oxygenase metabolism to industrial oxidation processes and to disease treatment.

CAS / MDL: 1317-61-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2015 ·Vol. 3 ·期 35 ·18036-18044 · IF 7.443

Double-shelled support and confined void strategy to improve the lithium storage properties of SnO2/C anode materials for lithium-ion batteries

Qinghua Tian,Yang Tian,Zhengxi Zhang,Li Yang,Shin-ichi Hirano

As promising anode materials for lithium-ion batteries, SnO2 materials have triggered significant research efforts due to their high theoretical capacity. However, their practical applications are impeded by their poor cycle life, which is caused by structural pulverization and large volume changes during cycling. Thus, the development of strategies to improve the cycling performance of SnO2 anodes is indispensable. Herein, a peculiar nanostructured SnO2/C composite (denoted as SnO2@DSC) with a double-shelled carbon support and confined void is fabricated, in which SnO2 is quasi confined in the void-space between two shells. It is suggested that the as-prepared SnO2@DSC has two unique advantages: on the one hand, SnO2 is quasi encapsulated into the confined void between two shells, huge volume change is largely buffered and its electrical connectivity is guaranteed, because even if SnO2 detaches from the outer shell, it can be immobilized again in the interior shell; on the other hand, the structural integrity of the electrode could be guaranteed by virtue of the dual-support of mechanically flexible double-shelled hollow carbon nanospheres. As a result, the as-prepared SnO2@DSC exhibited an excellent cycling performance, delivering a high reversible capacity of 838.2 mA h g−1 at 200 mA g−1 even after 500 cycles.

CAS / MDL: 9004-32-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2015 ·Vol. 3 ·期 43 ·21451-21459 · IF 7.443

Growth mechanism and active site probing of Fe3C@N-doped carbon nanotubes/C catalysts: guidance for building highly efficient oxygen reduction electrocatalysts

Jianbing Zhu,Meiling Xiao,Changpeng Liu,Junjie Ge,Jean St-Pierre,Wei Xing

Non-platinum (NP) electrocatalysts with high activity and durability for oxygen reduction reactions (ORR) are required for fuel cells and other renewable systems. To avoid trial-and-error methods and achieve the rational design and synthesis of efficient NP catalysts, in-depth knowledge of the formation/growth mechanism of nanocatalysts and the origin of active sites is highly desirable. Here, we report a new class of NP catalysts with a novel structure of Fe3C encapsulated in N-doped carbon nanotubes/C. We study the formation mechanism of the nanostructure to pave the way for controlled fabrication of high-performance NP catalysts. The encapsulation of iron into carbon occurs during the first step of CNT growth and the surface functional groups on carbon black are identified as being essential for forming CNTs. The catalyst shows ultrahigh catalytic performance in both acid and alkaline media. We also examine the structure–performance dependency. The catalytic performance is highly dependent on the nanostructure and the encapsulation of Fe3C. Fe affects the catalytic performance through electronic effects rather than by directly participating in the active sites. This result is confirmed by DFT calculations, which show an increase in the density of states and a reduction in the local work function, XPS studies, and electrochemical measurements. The likelihood of N participating in the active sites is low because the catalytic performance does not depend on pyridinic and graphitic N.

CAS / MDL: 461-58-5 7705-08-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
GREEN CHEMISTRY · 2014 ·Vol. 16 ·期 6 ·3007-3012 · IF 6.852

A highly active and easily recoverable chitosan@copper catalyst for the C–S coupling and its application in the synthesis of zolimidine

Chao Shen,Jun Xu,Wenbo Yu,Pengfei Zhang

Aryl sulfones were synthesized using a highly active and easily recoverable heterogeneous Cu catalyst which was prepared by simply stirring an aqueous suspension of chitosan in water with copper salts. The chitosan@copper catalyst catalyzed the coupling reactions of aryl halides with sodium sulfinates to readily give the corresponding sulfones in good to excellent yields. The highly active catalyst can be reused many times without losing its catalytic activity. In addition, by using this protocol, the marketed drug zolimidine (antiulcer) could be synthesized easily.

CAS / MDL: 9012-76-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2014 ·Vol. 5 ·期 7 ·5164-5172 · IF 3.708

Synthesis of magnetic porous γ-Fe2O3/C@HKUST-1 composites for efficient removal of dyes and heavy metal ions from aqueous solution

Yuhao Xiong,Fanggui Ye,Cong Zhang,Shufen Shen,Linjing Su,Shulin Zhao

A novel and inexpensive approach was adopted to develop magnetic porous γ-Fe2O3/C@HKUST-1 composites for the adsorption of dyes and heavy metal ions from aqueous solution. The γ-Fe2O3/C with unique functional groups present such as –OH and –NH2 was used as the support to directly grow HKUST-1 by a stepwise liquid-phase epitaxy process. The crystallographic, morphology, and magnetic properties as well as porosity of the as-synthesized γ-Fe2O3/C @HKUST-1 composites were carefully studied by XRD, SEM, TEM, XPS, TGA, and BET. The results indicated that the BET surface area, micropore volume, and saturation magnetization of the γ-Fe2O3/C @HKUST-1 are 993.4 m2 g−1, 0.69 cm3 g−1, and 12.6 emu g−1, respectively. In addition, a uniform distribution of ultrafine γ-Fe2O3 nanoparticles with an average diameter of 2–3 nm was observed in the γ-Fe2O3/C@HKUST-1 composites. Our results showed that methylene blue (MB) and Cr(VI) (used as a model for typical dye pollutants and heavy metal ions) are effectively removed from aqueous solutions by γ-Fe2O3/C@HKUST-1. The maximum adsorption capacities were 370.2 and 101.4 mg g−1 of adsorbent for MB and Cr(VI), respectively. Moreover, a removal efficiency of about 90% was retained after five cycles of consecutive adsorption–desorption. The adsorption kinetics data were well described by a pseudo-second-order model (R2 > 0.99), and equilibrium data were well fitted to the Langmuir isotherm model (R2 > 0.99). Finally, our results suggested that the γ-Fe2O3/C@HKUST-1 composites have a great potential to be employed for treatment of wastewater containing MB and Cr(VI).

CAS / MDL: 10025-77-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2016 ·Vol. 7 ·期 1 ·336-343 · IF 3.289

Facile synthesis of low-cost biomass-based γ-Fe2O3/C for efficient adsorption and catalytic degradation of methylene blue in aqueous solution

Tao Chen,Yuhao Xiong,Yuemei Qin,Haiguan Yang,Peng Zhang,Fanggui Ye

In this study, a novel and low-cost method was developed for synthesizing magnetic porous γ-Fe2O3/C as an adsorbent and catalyst for removal of methylene blue (MB) from aqueous solution. Using FeCl3·6H2O and bagasse as the precursor, the biomass-based material was synthesized rapidly using a microwave heating process. Fe ions were introduced to achieve both adsorption and catalytic degradation by the Fenton reaction. Characterization by BET, XRD, SEM, and TEM indicated that the prepared γ-Fe2O3/C material exhibited homogeneous mesoporosity with a BET surface area, mesoporous volume, and saturation magnetization of 764.116 m2 g−1, 0.54 cm3 g−1, and 17.1 emu g−1, respectively. The material exhibited excellent adsorption and catalytic degradation abilities for removal of MB from aqueous solution (up to 352.96 mg g−1), with complete degradation of MB within 30 min. Moreover, γ-Fe2O3/C had good stability over 5 cycles. Therefore, this biomass-based γ-Fe2O3/C material can be used as a highly effective and low-cost adsorbent and catalyst and has great potential application in clean-up processes for environmental pollutants.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。