文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4009至4020个,产品总数6,840个

切换升序
Co2
ACS Catalysis · 2026 · IF 13.6

Internal Electric Field Modulation in S-Scheme Heterojunctions via MOF Facet Engineering for Efficient Photocatalytic CO2 Reduction

Zhibo Su,Guoqiang Peng,Min Li,Guowei Zhou,Jiandong Pang,Falu Hu

Photocatalytic CO2 conversion into high-value-added products represents a promising approach to mitigating global energy demands and environmental problems. S-scheme heterojunctions hold significant potential for photocatalytic CO2 reduction owing to their efficient spatial charge separation and preserved strong redox capabilities, with the internal electric field (IEF) serving as the primary driving force for directional charge transfer. However, achieving precise and rational modulation of the IEF to further boost photocatalytic CO2 conversion efficiency remains a considerable challenge. Herein, we propose a crystal facet engineering strategy to finely tailor the IEF in S-scheme heterojunctions by employing metal−organic frameworks (MOFs) with well-defined exposed facets. A series of NH2-MIL-125@ZnIn2S4 (NM@ZIS) heterojunctions were constructed, and among them, the NM111@ZIS heterojunction interfaced exclusively with the (111) facet was demonstrated to possess the strongest IEF, as unambiguously verified by combined experimental characterization and density functional theory (DFT) calculations. This optimized charge configuration resulted in good photocatalytic CO2 reduction performance, yielding a CO evolution rate of 145.55 μmol·g−1·h−1, substantially outperforming counterparts with mixed or other facet orientations. This work provides a viable pathway for customizing the IEF in S-scheme heterojunctions through MOF crystal facet engineering, offering generalizable insights for the rational design of high-performance photocatalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
AICHE JOURNAL · 2026 · IF 4.4

Hydrophobic porous ionic liquids for efficient CO2 capture and conversion from humid flue gas under ambient conditions

Zixuan Xu,Qing Zhao,Huiqin Xu,Hang Li,Jincheng Yu,Yuxiao Xu,Youting Wu,Xiaomin Zhang

Here, we propose the hydrophobic porous ionic liquids (PILs) for CO 2 capture and conversion from humid flue gas. Specifically, silver was introduced onto the surface of ZIF-90 and the resultant material was incorporated into the hydrophobic ionic liquids (ILs) to form Type III PILs. The obtained LADDA-PIL exhibited an exceptional CO 2 absorption capacity and CO 2 /N 2 (15/85) selectivity of 2021, surpassing nearly all previously reported porous liquids. Dynamic breakthrough experiments confirmed that LADDA-PIL successfully captured CO 2 from humid flue gas. Moreover, the π-interaction between silver in LADDA-PIL and the alkynyl group enabled high-yield carboxylative cyclization of CO 2 with propargylic alcohols at ambient temperature. Density functional theory calculations and molecular dynamics simulations revealed that the hydrophobic ILs act as an effective H 2 O barrier, while the  NH 2 moiety of the ILs facilitates CO 2 transport and conversion. This study offers a promising strategy for energy-efficient carbon capture under humid conditions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

Design of Ce-doped Zr-UiO-66 integrated with dicationic ionic liquids for highly efficient CO2 cycloaddition

Fangfang Li,Jinjin Wang,Ying-Hua Zhou

Metal-organic frameworks (MOFs) possess highly tunable structures, making them promising heterogeneous catalysts for efficient CO 2 conversion reactions. In this work, cerium-modified zirconium-based metal-organic frameworks (ZrCe-UiO-66) were engineered and post-synthetically functionalized with dicationic ionic liquid moieties, enabling the simultaneous introduction of strong Lewis acidic sites and nucleophilic ionic liquid units without the need for external co-catalysts. The resulting ZrCe 0.5 -UiO-66-DIL(n-PyRIm) ( n  = 2, 3, 4; R = Et, Pr, Bu, Pe) functionalized MOFs were prepared via a modular grafting approach and exhibited remarkable catalytic performance. Among them, ZrCe 0.5 -UiO-66-DIL(2-PyBuIm) converted epichlorohydrin into the corresponding cyclic carbonate with 96% yield and 98% selectivity under solvent-free conditions at 110 °C and a CO 2 pressure of 0.1 MPa. This outstanding activity arises from a cooperative activation mechanism, in which the mixed Zr 4+ /Ce 4+ activate the epoxide substrate through Lewis acid coordination with the epoxide oxygen, thereby facilitating C O bond activation, while the bromide anions embedded in the ionic liquid moieties promote nucleophilic ring opening. In addition to high catalytic efficiency, the MOF hybrids demonstrated excellent recyclability and broad substrate tolerance. Combined CO 2 adsorption measurements and in situ infrared spectroscopy further revealed key surface intermediates, enabling a plausible mechanistic pathway for the cycloaddition process to be proposed.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
AICHE JOURNAL · 2026 · IF 4.4

A high-efficiency carboxylated choline amino acid ionic liquid for CO2 capture and its absorption-desorption performance

Yuqi Zhang,Daofan Ma,Taotao Fu,Chunying Zhu,Youguang Ma

Efficient and low-energy absorbents are always desirable to control the greenhouse effect. In this study, a novel amino polycarboxylate ionic liquid absorbent is constructed by introducing carboxylate groups. The CO 2 absorption-desorption experiments in microchannel and macroscopic devices are performed to comprehensively investigate the performance of choline iminodiacetate ([Ch] 2 [IDA]). It is found that [Ch] 2 [IDA] could form soluble carbamic acid upon CO 2 absorption, thereby effectively preventing equipment blocking compared to choline glycine ([Ch][Gly]). The dual carboxyl groups in [IDA] 2− could generate a synergistic effect to weaken the negative inductive action of the amino group; consequently, [Ch] 2 [IDA] displays superior CO 2 absorption performance over [Ch][Gly]. Furthermore, [Ch] 2 [IDA] aqueous solution could release more CO 2 in the rapid desorption stage and effectively alleviate the sharp increase of energy consumption during the desorption termination period. Especially, it exhibits excellent cycling stability. Comparatively, [Ch] 2 [IDA] aqueous solution demonstrates great potential as a next-generation efficient and low-energy CO 2 absorbent.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL RESEARCH · 2026 · IF 8.2

Piezo-Photothermal Accelerates Co3+/Co2+ cycle to Boost PMS Activation over Co3O4/PTFE for Efficient Antibiotic Degradation

Shihan Wang,Weike Zheng,Haifeng Shi,Yigang Chen

In peroxymonosulfate (PMS) activation processes, the relatively slow redox kinetics of metal ions have been a key factor limiting both PMS activation efficiency and photocatalytic performance. In this study, a Co 3 O 4 /PTFE composite with integrated piezoelectric and photothermal properties was successfully constructed, which significantly enhanced the Co 3+ /Co 2+ cycle and thereby promoted PMS activation for efficient tetracycline (TC) degradation. Under the dual stimulation of mechanical agitation and visible light irradiation, the Co 3 O 4 /PTFE composite exhibited enhanced photothermal conversion and piezoelectric performance, which significantly promoted the generation of reactive species such as SO 4 •- and •OH. Compared with pristine Co 3 O 4 , CoP-2 demonstrated a superior TC degradation efficiency of up to 83% in the PMS system. X-ray photoelectron spectroscopy (XPS) analysis revealed that the introduction of polytetrafluoroethylene (PTFE) induced interfacial strain, modulated the valence state of cobalt species, and optimized the surface electronic structure, thereby facilitating the formation of active sites and enhancing electron transfer processes. Free radical trapping experiments further identified the dominant reactive species and revealed the underlying synergistic catalytic mechanism. Moreover, CoP-2 maintained excellent stability after multiple degradation cycles. This study provides a novel strategy for the design of multifunctional synergistic catalysts and expands the application potential of piezo-photothermal/PMS systems in environmental purification.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Nanoscale · 2026 · IF 5.2

Atomically Dispersed Tin in Cuprous Oxide for Enhancing *CO Coverage to Selectively Electroreduce CO2 toward C2 Products

Shuai Wang,Liu Chang,Yue Qin,Zepu Chen,Qingfa Wang

The conversion of CO 2 into high-value chemicals using renewable electricity holds great application prospects. However, improving the selectivity toward C 2 products remains a challenge. Here, we report a Sn atomically dispersed in Cu2O matrix (Sn-Cu2O), synthesized via a facile one-pot method. The as-prepared catalyst Sn-Cu2O-0.025 displays a Faradaic efficiency of 73.2% for C2 products with ethanol accounting for 32.1% at the current density of 200 mA cm-2 . Based on in-situ FT-IR characterization, the introduction of Sn promotes the activation of CO2 to *CO and enhances the coverage of *CO. As a result, the C-C coupling accelerates the formation process of key intermediates *OCCOH and enhances the selectivity of the C2 products. This study provides insights

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Separations · 2026 ·Vol. 13 ·期 5 ·148 · IF 3.5

A Facile Strategy to Construct Structured Mg-Gallate Adsorbent for Post-Combustion CO2 Capture Under 80% RH

Siyu Wang,Junyang Du,Junsu Jin,Jianguo Mi

Metal–organic frameworks (MOFs) show great potential for post-combustion carbon capture, yet their practical application is often constrained by challenges such as powder handling difficulties, limited structural stability during shaping processes, and performance degradation under high-humidity conditions. In this study, Mg-gallate was structured into millimeter-sized Mg-gallate/CA composite beads via the ionotropic gelation method, and then a hydrophobic layer of vinyltrimethoxysilane (VTMS) was constructed on the bead surface by chemical vapor deposition. The synthesized Mg-gallate/CA and V-Mg-gallate/CA are characterized by XRD, FT-IR, and other techniques, and their CO2adsorption behavior, adsorption–desorption kinetics, breakthrough performance, and cyclic stability are systematically evaluated. At 298 K and 0.1 bar, the CO2adsorption capacity of Mg-gallate/CA reached 94.2% of that of Mg-gallate powder. The microporous–microporous hierarchical structure constructed by the ionotropic gelation method improved the CO2capture efficiency of the composite beads by 16.7% at 0.1 bar. V-Mg-gallate/CA maintained a high dynamic CO2adsorption capacity of 2.87 mmol/g for a 10 vol.% CO2/90 vol.% N2gas mixture at 298 K under 80% RH, corresponding to 2.04 times the capacity of Mg-gallate/CA, and retained 98.8% of its initial adsorption capacity at 0.1 bar after 10 cycles. Combining ionotropic gelation shaping with surface hydrophobic modification represents an effective strategy for developing MOF-based adsorbents suitable for post-combustion CO2capture.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
AICHE JOURNAL · 2026 · IF 4.4

Mass transfer of CO2 in biphasic diethylenetriamine–1-dimethylamino-2-propanol solvent for structured packed absorption columns

Yaxing Zhang,Liju Bai,Xiaotong Jiang,Yimin Deng,Helei Liu

Mass transfer performance is an important design criterion for the absorption of CO 2 by amines in packed columns. In this paper, the effects of diethylenetriamine (DETA)–1-dimethylamino-2-propanol (1DMA2P)–H 2 O biphasic solvent on the total mass transfer coefficient ( K G a v ) of different operating parameters (liquid flow rate, gas flow rate, liquid temperature, CO 2 partial pressure, and CO 2 loading) were investigated in a mesh-structured (DX) packed column. The mass transfer mechanism of this biphasic solvent to capture CO 2 was assessed by determining the control step of mass transfer. In addition, the experimental data were compared with two empirical models, the Sheng model and the modification, and the results showed that the modification could better fit the experimental results. Further analysis was conducted on the differences in packed column design among several different amine systems and the DETA–1DMA2P–H 2 O system. The findings revealed that the DETA–1DMA2P–H 2 O system required the least column volume, highlighting its strong potential for industrial application.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Carbon Energy · 2026 · IF 21.4

Superior CO2 Conversion Performance by Er-Doped BiOCl Nanosheets Through Synergistic Photocatalytic Memory Effect and Er-Doping

Lizhen Lu,Xinghua Zhu,Yuan Liang,Jinghui Wang,Haoyu Zhang,Jinbo Xue,Qianqian Shen,Jian Ku Shang,Qi Li

To search for efficient carbon dioxide reduction photocatalysts, rare-earth element doping has attracted considerable attention owing to their unique electronic structures and energy levels, which significantly enhance light absorption and charge-transfer efficiency. In this work, Er-doped two-dimensional ultrathin BiOCl nanosheets are synthesized via a surfactant-assisted hydrothermal method. Er-doping not only suppresses the photogenerated charge carrier recombination but also further enhances the photocatalytic memory effect of BiOCl nanosheets. The synergistic effect of Er doping and the photocatalytic memory effect induced by prior visible-light irradiation largely modulates the internal electronic state of BiOCl nanosheets. Experimental and density functional theory analysis results demonstrate that desirable changes subsequently occur in Er-doped BiOCl nanosheets, compared with pure BiOCl nanosheets, including the generation of abundant oxygen vacancies, improvement of visible light absorption, higher photogenerated electron reduction potential, stronger piezoelectric response, better charge carrier separation and transfer, enhanced CO 2 adsorption, and lower CO 2 activation energy. Bi 0.98 E 0.02 OCl nanosheets (2 mol% Er) exhibit superior CO 2 -to-CO reduction performance in photocatalysis, piezocatalysis, and photopiezocatalysis without co-catalysts, photosensitizers, or sacrificial agents. With nearly 100% selectivity, the photopiezocatalytic CO 2 -to-CO rate reaches ~3921.2 μmol g −1 h −1 under visible light and ultrasonication, far exceeding previous reports.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Optimizing Interfacial Sites of Ni/ZrO2 via Morphology-Induced Crystal Phase Modulation to Enhance Photothermal CO2 Conversion

Dong Cao,Yuhao Tian,Xueke Wang,Cuimei Li,Weijie Cai,Congming Li,Chun-Ran Chang

Photothermal CO 2 conversion into value-added syngas via dry reforming is pivotal for greenhouse gas utilization, yet its efficiency is constrained by catalyst deactivation. Here, we demonstrate that morphology-induced crystal phase modulation of ZrO 2 supports enables effective optimization of interfacial sites in Ni/ZrO 2 catalysts. By engineering cubic (Ni/ZrO 2 -C) and stellated (Ni/ZrO 2 -S) architectures, a metastable mixed-phase structure (54.8% monoclinic/37.3% tetragonal) is stabilized to achieve precise phase regulation. Systematic characterization reveals that this phase transformation strengthens metal–support interactions, improves Ni dispersion, and generates abundant oxygen vacancies. As a result, Ni/ZrO 2 -C achieves 95% ethanol conversion with lower by-product formation and exhibits exceptional stability, with a 50% lower deactivation rate (0.13% h −1 ) than Ni/ZrO 2 -S (0.26% h −1 ). The enhanced performance is attributed to improved surface basicity and more efficient coke gasification facilitated by interfacial oxygen vacancies. ​Theoretical calculations further confirm kinetically favorable pathways with reduced activation barriers, particularly for carbon oxidation, accounting for the observed 3.2-fold higher activity of Ni/ZrO 2 -C. This work establishes morphology-directed crystal phase engineering as a general strategy for designing efficient photothermal catalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Hydrogen-bond-assisted thermally crosslinked PIM membranes for selective H2 and CO2 separation with enhanced plasticization resistance

Zeyuan Gao,Yongchao Sun,Lu Bai,Tianyou Li,Jianyu Guan,Fake Sun,Fangxu Fan,Gaohong He,Canghai Ma

Ring-opened TB-OR is blended with PIM-1 to form a hydrogen-bonded membrane. • The TB-OR-PIM treated at 350 °C for 10 h achieve CO 2 /CH 4 selectivity of 330.0. • The optimized membranes exhibit 17.4- and 34.4-fold selectivity improvements. • The membranes show excellent resistance to CO 2 plasticization at 600 psi. Polymers of intrinsic microporosity (PIM) membranes have shown great potential for hydrogen purification and carbon dioxide separation, but often suffer from low gas selectivity. Here, a hydrogen-bonded-assisted, thermally crosslinked membrane is prepared by incorporating ring-opened TB-OR with PIM-1. Hydrogen-bonding interactions between the amine groups of TB-OR and the nitrile groups of PIM-1 promote interchain association and preorganization before thermal treatment. Subsequent thermal treatment induces chain rearrangement, structural densification, and partial covalent crosslinking, while hydrogen-bonding interactions are re-established upon cooling, leading to a more size-selective microporous structure. The membrane treated at 350 °C for 10 h exhibits CO 2 /CH 4 and H 2 /CH 4 selectivities of 330.0 and 708.3, representing 17.4- and 34.4-fold improvements over the uncrosslinked membrane, surpassing the 2019 upper bound for CO 2 /CH 4 and approaching the 2015 upper bound for H 2 /CH 4 separation. Both pure- and mixed-gas tests at 600 psi confirm excellent resistance to CO 2 plasticization, while aging measurements further demonstrate improved performance stability. These results highlight the effectiveness of hydrogen-bond-assisted thermal crosslinking in regulating chain packing and microporous structure in PIM-based membranes for hydrogen purification and high-pressure CO 2 separation. A thermally crosslinked membrane platform was developed by integrating ring-opened TB-OR with PIM-1 to simultaneously enhance gas separation selectivity and operational stability. Download: Download high-res image (388KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Asymmetrically Coordinated Ni-Based Single-Atom Catalyst Enables Ultra-Wide Potential Window for Ampere-Level CO2 Electroreduction

Weiqi Lu,Zhenyang Dai,Ruichao Xu,Yufeng Chen,Min Ge,Wenxue He,Jinglin Yuan,Yanna Shui,Ya Pan,Yong Zhang,Chao Wang,Yajuan Feng,Shi He,Zhihu Sun

Conventional Ni–N 4 single-atom catalysts (SACs) hold great promise in sustainable energy conversion and storage, but suffer from weak * COOH adsorption and narrow potential windows during CO 2 electroreduction (CO 2 RR). To address this limitation, herein we report an asymmetric Ni–N 3 O 1 SAC prepared via an oxygen-mediated spatial confinement pyrolysis strategy. Theoretical calculations predict that this unique asymmetric coordination can effectively lower the * COOH formation energy, promote the interaction between the catalyst and * COOH, and suppress the competing hydrogen evolution reaction in CO 2 RR. The prepared Ni–N 3 O 1 SAC features a distorted planar quadrilateral structure and demonstrates exceptional performance in CO 2 -to-CO conversion, with a maximum turnover frequency of 207 700 h −1 , a maximum CO partial current density of 810 mA cm −2 , and CO Faradaic efficiency of ≥ 99% over an ultra-wide potential window of 2100 mV (−0.3 to −2.4 V vs. reversible hydrogen electrode) in a flow cell. A combination of in situ spectroscopic measurements verifies the reversible structural evolution and robust stability of the Ni–N 3 O 1 SAC under CO 2 RR conditions, as well as the strengthened * COOH formation and accelerated CO 2 activation kinetics. This work provides a feasible route for designing and synthesizing high-performance asymmetrically coordinated SACs toward industrial CO 2 -to-CO conversion.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。