APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Zirui Qin,Jiehao Xie,Xiaofang Wen,Hongcan Lou,Zipin Peng,Xingkun Chen,Yuan Tan,Jisong Zhang
Chlorinated phenols are priority pollutants that require efficient low-temperature removal technologies. Here, we synthesize a series of spinel-type MAl 2 O 4 (M = Co, Mg, Zn, Cu) supports and deposit 1 wt% Pd via incipient-wetness impregnation to evaluate their hydrodechlorination (HDC) performance toward 4-chlorophenol under ambient aqueous conditions (30 °C, 0.2 MPa H 2 ). Catalytic screening shows that the identity of the divalent A-site cation strongly modulates activity: Pd/Co-Al achieves 91.8 % conversion with > 98.3 % selectivity to phenol, outperforming Pd/Ni-Al (84.7 %) and the remaining analogues. Pd/Cu-Al exhibits almost no conversion (<5.0 %), while Pd/Mg-Al and Pd/Zn-Al give moderate conversions (ca.55.4–58.7 %). Detailed characterization by XRD, N 2 -physisorption, H 2 -TPR, XPS and STEM reveals that the superior performance of Pd/Co-Al is rooted in (i) strong metal–support interactions that stabilize a balanced Pd 2+ /Pd 0 surface ensemble, (ii) coherent lattice matching at Pd(1 1 1)/CoAl 2 O 4 (311) interfaces that suppress particle growth, and (iii) high spinel thermostability that mitigates leaching and coking. A 30 h continuous-flow test confirms stable operation without activity loss. This work elucidates how subtle variations in spinel composition dictate Pd electronic structure and interfacial geometry, providing design principles for next-generation HDC catalysts.
✓ 已验证
产品关联
DOI
高影响因子
DYES AND PIGMENTS
·
2020
·
IF 4.613
Xiaojun He,Qi Xie,Jinyi Fan,Chuchu Xu,Wei Xu,Yahui Li,Feng Ding,Hui Deng,Hong Chen,Jianliang Shen
Rationally designed and synthesized Schiff base sensor CMTAH containing coumarin fluorophores by the coupling of coumarin aldehyde and thiophene-2-carbohydrazide and acts as differentially selective chemosensor via colorimetric/ratiometric responses to Cu(II)/Zn(II) ions with fluorescence switchable strategy in aqueous media . Variation in absorption and emission spectra of CMTAH with different metal cations in aqueous media reveal high-affinity binding to Cu(II)/Zn(II) ions over other coexisting cations. Moreover, the spectrometric titrations and Job's plot curves substantiated the stoichiometric ratio of 1:1 for Cu(II)/Zn(II) complexes formation with low detection limits of 141 nM and 72 nM, respectively. Particularly, the responding mechanism of CMTAH toward Cu(II)/Zn(II) ions was investigated by density functional theory calculations. Notably, the molecular logic gates were established with the combination of CMTAH for the intelligentialized recognition of Cu(II)/Zn(II) ions. Additionally, the compatibility and permeability of CMTAH were attributed to Schiff base group, which exhibited remarkable responding and bioimaging in living cells and zebrafish. Notably, CMTAH could be used to image in Drosophila larvae with a clearly visible profile of internal organs and effectively capture Cu(II) and Zn(II) ions in living Drosophila larvae, which lay the foundation of sensors in the field of Drosophila biological imaging research.
✓ 已验证
DOI
高影响因子
ACS Applied Polymer Materials
·
2021
·
IF 4.089
Tianyou Chen,Zihao Wang,Wei Xiao,Changfeng Yi,Zushun Xu
Transformation of multifunctional homogeneous catalysts to the corresponding heterogeneous catalytic systems makes catalytic reactions interesting from both economic and environmental points of view. Here, we have devised a controllable and efficient strategy for the preparation of supported multifunctional catalysts by taking the Cu/2,2,6,6-tetramethyl-1-piperidine-N-oxyl (TEMPO) catalytic system as an example. Polystyrene-supported Cu/TEMPO catalysts were, for the first time, prepared via nanoprecipitation of polymers in water and efficient for aerobic oxidation of benzyl alcohol (BnOH). Cooperative behaviors could be regulated by precise control of local concentrations of functional groups. We have demonstrated that the incorporation of functional groups into polystyrene supports can make better use of catalytic components, resulting from confinement-enhanced cooperation. This strategy provides access to build more efficient multifunctional heterogeneous catalysts through establishing structure–activity relationships.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Hao Zhang,Junyan Wang,Minjie Liu,Di Liu
Cu/Al 2 O 3 catalyst was developed by a double hydrolysis precipitation. Over the Cu/Al 2 O 3 catalyst, a continuous mode of N-methylations of nitroarenes with methanol was successfully achieved under the exogenous base- and H 2 - free condition. Methylation process of nitroarenes could be controlled just by adjusting reaction conditions, affording the desired N-monomethylanilines or N, N-dimethylanilines, respectively. The characterization displayed that the double hydrolysis precipitation method made active metal Cu surface enrichment and high dispersion, meanwhile endow Cu/Al 2 O 3 with more developed pore system, which were responsible for the higher performance of our catalyst relative to Cu/Al 2 O 3 -CP. Compared with the reported batch mode, our procedure possessed the merits of low cost, environment-friendliness, better controllability and wide universality.
✓ 已验证
DOI
高影响因子
ACS Catalysis
·
2018
·
IF 11.384
Run-Ping Ye,Ling Lin,Chong-Chong Chen,Jin-Xia Yang,Fei Li,Xin Zhang,De-Jing Li,Ye-Yan Qin,Zhangfeng Zhou,Yuan-Gen Yao
The insufficient catalytic stability of Cu-based catalysts is still its bottleneck in industrial application, and it is widely studied how to synthesize highly stable Cu-based catalysts. Herein, we have developed a MOF-derived preparation of robust Cu/SiO2 catalyst for the efficient hydrogenation of dimethyl oxalate (DMO) to ethylene glycol (EG). The sol–gel method was used to in situ load the HKUST-1 into SiO2 support with only a copper loading of 7.83%. The advantages of MOF-derived Cu/SiO2 catalyst are that copper species could escape from severe coating by silica matrix and expose more active sites with small particles sizes (4.2 nm). Furthermore, it is inclined to generate more stable Cu2O reduced from Cu–O–Si units by using MOF as precursor. As a result, more than 95.0% selectivity of EG with a long lifetime of 220 h was achieved over the Cu/SiO2-MOF catalyst. On the contrary, when using the copper nitrate as the copper precursor, the prepared Cu/SiO2-CN catalyst with similar copper loading exhibited much lower catalytic activity because that copper species were encapsulated into SiO2 network and difficult to be available for reactants. Therefore, using MOF as copper precursor solves the problem of high-dispersed copper species but inactive by coating with SiO2 matrix.
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Ling Cheng,Tao Jiang,Kai Yan,Jianyu Gong,Jingdong Zhang
When photoelectrocatalysis (PEC) couples with electroenzymatic catalysis (EEC), effective utilization of electrons from PEC process for yield of H 2 O 2 plays an important role in the enzymatic catalysis. In the present work, we designed a novel dual-cathode PEC-EEC system for pollutant removal. In this system, BiVO 4 photoanode was prepared by electrodeposition for visible light-driven PEC process while carbon cloth was used as the first cathode for electrogeneration of H 2 O 2 and hemin/Cu prepared by electrophoretic deposition acted as the second cathode for enzymatic catalysis. The performances of the constructed dual-cathode PEC-EEC system were evaluated by decoloring Rhodamine B (RhB), which showed high decoloration percentage with acceptable stability and reusability. Further, the system was applied to degradation of tetracycline (TC), indicating that about 93.6% of TC was removed after 2-h treatment. A pathway for TC degradation in such a dual-cathode PEC-EEC system was proposed based on the intermediates determined by liquid chromatography coupled to mass spectrometry in tandem (LC-ESI-MS/MS).
✓ 已验证
DOI
高影响因子
Nanoscale
·
2020
·Vol. 12
·期 31
·16605-16616
·
IF 6.895
Rong Dai,Ziliang Zheng,Chenshuai Lian,Kai Shi,Xu Wu,Xia An,Xianmei Xie
To enhance the catalytic performance of catalysts for the ethanol steam reforming (ESR) reaction, a facile reverse micelle strategy was adopted to prepare a core@shell Ni–Cu@Ca–SiO2 (Ni–Cu@CS) nanoreactor composed of an ultra-small Ni–Cu alloy (∼2.8 nm) encapsulated in Ca-functionalized SiO2 nanoparticles. Benefiting from its core@shell structural features and unique components, the Ni–Cu@CS nanoreactor exhibited superior activity (69.91% H2 selectivity and 99.99% ethanol conversion) and stability compared to reference samples. The regenerated Ni–Cu@CS nanoreactor showed high stability, maintaining 98.14% ethanol conversion and only 1.98 mg gcat−1 h−1 in carbon deposition. The high catalytic performance of Ni–Cu@CS is attributed to not only its encapsulated structure, which effectively prevented the sintering of neighboring Ni–Cu alloy nanoparticles, but also to its Ca-functionalized porous SiO2 shell, suppressing the carbon deposition. Moreover, its porous thin shell facilitated the mass transfer and diffusion of reactants and products. Thus, the Ni–Cu@CS nanoreactor is expected to become a new type of high-efficiency nanoreactor for the ESR reaction.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2021
·
IF 8.067
Jie Song,Jun Li,Xiangren Bai,Liang Kang,Liying Ma,Naiqin Zhao,Shuilin Wu,Yuan Xue,Jiajun Li,Xiaojian Ji,Junwei Sha
Low photothermal conversion efficiency restricts the antibacterial application of photothermal materials. In this work, two-dimensional carbon nanosheets (2D C) were prepared and decorated with Cu nanoparticles (2D C/Cu) by using a simple soluble salt template method combined with ultrasonic exfoliation. The photothermal conversion efficiency of 2D C/Cu system can be optimized by changing the content of Cu nanoparticles, where the 2D C/Cu2 showed the best photothermal conversion efficiency ( η ) of 65.05 % under 808 nm near-infrared light irradiation. In addition, the photothermal performance can affect the release behavior of Cu ions. This superior photothermal property combined with released Cu ions can endow this 2D hybrid material with highly efficient antibacterial efficacy of 99.97 % ± 0.01 %, 99.96 % ± 0.01 %, 99.97 % ± 0.01 % against Escherichia coli , Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus, respectively, because of the synergetic effect of photothermy and ion release. In addition, this 2D hybrid system exhibited good cytocompatibility. Hence, this study provides a novel strategy to enhance the photothermal performance of 2D materials and thus will be beneficial for development of antibiotics-free antibacterial materials with safe and highly efficient bactericidal activity.
✓ 已验证
DOI
高影响因子
Journal of Water Process Engineering
·
2025
·
IF 6.7
Ping Zhang,Xinru Yang,Can Wang,Fuwei Sun,Haibo Liu,Tianhu Chen,Dong Chen,Ziyang Chu,Jin Zhang,Jian Huang,Fazhi Xie
The bimetallic synergistic effect plays a significant role in enhancing the efficiency of antibiotics degradation via hydrogen peroxide (H 2 O 2 ) activation. In this study, the degradation of sulfamethazine sodium (SMT) by H 2 O 2 was comprehensively explored in a system where Cu(II) and Co(II) ions synergistically activate H 2 O 2 in the presence of calcite. The Cu(II)/Co(II)/calcite/H 2 O 2 system using only 1.0 mg/L of Cu(II), exhibits excellent oxidation capacity, enabling complete removal of SMT within 1 h (0.085 min −1 ). This rate is 4.5 and 23.5 times higher than those observed in the Cu(II)/calcite/H 2 O 2 (0.019 min −1 ) and Co(II)/calcite/H 2 O 2 systems (0.0036 min −1 ), respectively. According to scavenger experiments, ESR captures test, and chemical probe experiments, it is determined that Cu(III) primarily contributes to SMT degradation, rather than hydroxyl radicals (·OH), singlet oxygen ( 1 O 2 ), and high valent cobalt-oxo species [e.g. Co(IV)]. The introduction of Co(II) promotes the formation of Cu(III) by accelerating the oxidation of Cu(II). Furthermore, the degradation pathways for SMT are elucidated through UPLC-ESI-MS/MS analysis, and variations in toxicity are rigorously assessed using the ECOSAR program. In summary, this study reveals the highly effective synergistic activation of H 2 O 2 by Cu(II) and Co(II) in the presence of calcite, offering new insights into the comprehensive utilization of calcite in environmental catalysis, particularly for addressing the pollution caused by coexisting heavy metals and antibiotics.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Yandong Xu,Wenhao Su,Zihui Jing,Zhouyu Jiang,Mingliang Wang
The development of highly active photocatalysts for H 2 O 2 production is of significant practical importance for addressing environmental issues and energy shortages. In this study, an S-scheme heterojunction photocatalyst with strong redox performance was synthesized through the in-situ growth of the TpPa-Cl covalent organic framework (COF) material on the surface of Cu-loaded ZnO nanorods. The incorporation of Cu disrupts the charge shielding effect of ZnO, promotes the spatial separation of charge carriers, and enhances piezoelectric catalytic activity. Furthermore, the porous ultra-thin COF layer extends carrier lifetime and increases the contact area with reactants, endowing the composite with strong light absorption capacity and excellent oxygen reduction performance. Under the combined influence of the piezoelectric-photocatalytic dual electric field, the H 2 O 2 yield of the composite in pure water reached 1838.8 μmol g −1 h −1 , and the resulting H 2 O 2 solution can be directly utilized for pollutant removal and water disinfection. In situ X-ray photoelectron spectroscopy, density functional theory calculations, and electron spin resonance studies elucidate the S-scheme electron transfer mechanism, which accelerates the transfer of photogenerated carriers and enhances the utilization of electron-hole pairs. This research offers a novel approach for the design and development of catalysts aimed at efficient H 2 O 2 production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Catalysis
·
2025
·
IF 13.1
Hongzhong Wang,Kai Chen,Junheng Huang,Chengchao He,Qinlong Zhang,Junwei Li,Zhifang Zhang,Zhenhai Wen
4-Nitrophenol (4-NP), a toxic and recalcitrant pollutant, necessitates effective remediation strategies. Here, a noble metal-free NiCu-NC electrocatalyst is developed, where dual atomic Ni–Cu sites are elegantly anchored on a rhombic dodecahedral nitrogen-doped carbon matrix, enabling selective electrochemical reduction of 4-NP into value-added p-aminophenol (4-AP). This catalyst achieves a low overpotential and a high Faradaic efficiency of 95.7% for 4-AP production. Density functional theory (DFT) calculations reveal that the NiCu dual-atom configuration minimizes the energy barrier for the rate-determining step, thereby enhancing catalytic performance. Furthermore, a hybrid acid/alkali flow electrolysis cell is designed to couple the cathodic 4-NP reduction with the anodic oxygen evolution. This system maintains stable operation for over 400 h while maintaining a high Faradaic efficiency (>91%) and near-complete conversion (99%) for valorization of 4-NP. This work demonstrates a practical electrocatalytic approach for pollutant transformation and chemical production with potential implications for wastewater treatment and resource utilization.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Composites and Hybrid Materials
·
2025
·Vol. 8
·期 3
·1-16
·
IF 21.8
Wu Jun,Zhao Xinlei,Song Shangzhi,Wang Lei,Guo Yanan,Ding Jing,Mei Danhua,Wan Hui,Guan Guofeng
Efficient plasma-catalysis of CH 4 and CO 2 to value-added oxygenates remains challenging due to limited research on the activation and conversion mechanism of the * CO intermediate. The rational design of catalysts at the atomic level can improve mechanistic understanding. In this study, an atomically dispersed catalyst with diatomic Cu centers anchored on carbon nitride nanosheet is developed. The coordination structure of Cu diatoms with four N atoms and two C atoms provides a new channel for efficient charge transfer and separation, enhancing CH 4 and CO 2 conversion. Additionally, CO-DRIFT and theoretical calculations demonstrate that strong CO adsorption and the stable * CH 3 OH intermediate on Cu diatomic sites promote CH 3 OH generation. This study presents a viable strategy for designing novel diatomic catalyst for CH 4 and CO 2 conversion into value-added products, and expands understanding of the plasma-catalysis mechanism at the atomic level.
✓ 已验证
产品关联
DOI
高影响因子