Energy & Environmental Materials
·
2026
·
IF 13.8
Xiaoliang Zhang,Lei Chen,Xiaojie Lu,Aishan He,Weifeng Shen,Chunxia Wang,Yong Liu,Xiangwu Zhang
Aqueous zinc-ion batteries (AZIBs), particularly zinc-manganese (Zn-Mn) systems, hold great promise for large-scale energy storage but face challenges from parasitic reactions of the anode and poor conductivity of the cathode. Herein, a multifunctional additive naphthol green B (NGB), which contains a planar organic group and a transition metal ion, is applied to concurrently address anode and cathode issues during battery cycling. Specifically, the adsorption and partial decomposition of the planar organic group construct a hierarchical interfacial layer on the anode surface, comprising an organic outer phase and an inorganic inner phase, assists to alleviate side reactions and modulate zinc deposition. Meanwhile, Fe 3+ ions released from NGB incorporate into the α-MnO 2 cathode during discharge, increasing oxygen defects and lowering the Mn average oxidation state, which improves the structural stability and electrical conductivity of the Mn-based cathode, further boosting capacity and cycling performance. Consequently, the Zn‖Zn cell demonstrates stable operation for 3500 h at 1 mA cm −2 , and the Zn‖Cu cell achieves an average Coulombic efficiency of 99.87% over 2500 cycles at 5 mA cm −2 . Notably, the Zn‖MnO 2 cell employing modified electrolyte exhibits no capacity decay after cycling 250 and 1000 times at 0.2 and 1 A g −1 , respectively. This work presents new perspectives on simultaneously addressing anode and cathode issues in AZIBs based on electrolyte engineering, highlighting the function of the additive structure and composition.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 3
·122405
·
IF 7.5
Xiangwu Meng,Liangji Xu,Jianjun Li,Xuekai Wang,Junshu Wu
Loofah sponge carbon (LOC) was employed as a three-dimensional scaffold and magnetized through alkaline hydrothermal treatment followed by co-precipitation to obtain magnetic loofah sponge carbon (MLOC). Subsequent lanthanum incorporation produced La₃-MLOC, which integrates a hierarchically porous architecture with magnetic separability for phosphate removal from complex waters. La₃-MLOC delivered a Langmuir capacity of 117.32 mg/g at pH 3 and showed rapid uptake across pH 3–6, achieving > 90% removal within 15–40 min while maintaining good tolerance to common coexisting ions. Kinetic fitting (PSO and Avrami, n ≈ 0.82) suggests a predominantly site-specific chemisorption pathway. Microscopic and spectroscopic analyses support La–OH-mediated hydroxyl displacement/inner-sphere complexation, accompanied by partial LaPO₄ precipitation. The sorbent retained high performance over four adsorption–desorption cycles (removal about 92%; desorption about 77%). When evaluated using real effluent from a coal-mining subsidence outfall, La₃-MLOC enabled low-level phosphate polishing to Class III targets at low dosage and short contact time, with an estimated treatment cost of 0.341 USD/g, indicating its potential for end-of-pipe phosphate control and resource-oriented management.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Peng Du,Wei Gao,Zhaohui Huang,Chuqi Jiang,Jiahui Zhang,Dongjun Lv,Luyang Liang,Ling Yin,Xiaolei Zhang,Hongbo Zhang,Huiting Wu
Three-level ET cascade relieves bottleneck. • TMB: 5.8x act., 24.2x eff.. • GSH sensing + redox disruption (depletion/ROS). Nanozyme efficiency is fundamentally constrained by interfacial electron transfer (ET) bottlenecks, yet most strategies overlook the rational design of ET pathways. Herein, a ternary NiMo 6 @MIL-100(Fe)/g-C 3 N 4 nanozyme featuring a hierarchical three-level ET cascade was reported: TMB substrates are preconcentrated onto g-C 3 N 4 via π–π stacking (Level I); electrons transfer from g-C 3 N 4 to Fe 3+ nodes of MIL-100(Fe) through interfacial Fe O C bonds (Level II); and finally cascade into the encapsulated NiMo 6 cluster for H 2 O 2 activation and •OH generation (Level III). This design yields higher activity than binary (1.8-fold) and pristine counterparts (5.8-fold), with a 24.2-fold enhancement in catalytic efficiency for TMB. By leveraging glutathione (GSH) as a specific electron cascade interceptor, a colorimetric assay achieves a detection limit of 0.36 μM with excellent selectivity over structurally similar thiols. Beyond sensing, the same cascade efficiently depletes GSH and induces intracellular ROS bursts in HepG2 cells, disrupting tumor redox homeostasis and highlighting its therapeutic potential and establishing a mechanism-driven paradigm for biosensing and cancer therapy. A hierarchical three-level ET cascade transforms electron bottlenecks into a superhighway for GSH sensing and tumor redox therapy. Download: Download high-res image (274KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2026
·
IF 9.6
Zhengyang Chi,Yonghong Niu,Lin Ma,Yuan Tian,Hao Li
The global transition toward low carbon energy systems has intensified the demand for renewable H 2 and cleaner syngas production. Biomass steam gasification is a promising route, but tar formation and catalyst deactivation still limit its practical application. Herein, Pr 1– x Ce x FeO 3 supported on calcined dolomite was developed for staged biomass steam gasification to couple H 2 production with tar reforming. Statistical screening identifies gasification temperature, Ce substitution level, and steam flow rate as the dominant factors controlling H 2 formation. Under single-factor conditions, Pr 0.6 Ce 0.4 FeO 3 /CD shows the best performance, giving 44.33 vol% H 2 , a total gas yield of 1.51 Nm 3 /kg biomass, a syngas yield of 1.10 Nm 3 /kg biomass, and a syngas fraction of 72.77 vol%. Tar conversion is optimal near 850 °C, where the dry tar yield decreases to 22.75 g/kg biomass, while heavy polycyclic aromatics and >C13 compounds account for 0.79% and 4.14% of the total gas chromatography-mass spectrometry (GC-MS) peak area, respectively. Response surface optimization gives an optimum at 810 °C, x = 0.4, and a steam flow rate of 1.2 mL/min, with an experimental H 2 fraction of 46.22 vol%. Structural and surface analyses indicate that moderate Ce substitution preserves the perovskite framework while regulating defect formation, surface oxygen species, and Fe/Ce/Pr redox behavior. Cycling deactivation is mainly associated with carbonaceous deposits, Fe migration, CaO carbonation, and structural densification. This work provides a feasible perovskite dolomite strategy for integrated tar reforming and production of syngas rich in H 2 from biomass.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Chuanfei Zhang,Wenjun Yin,Zhangjie Yu,Xin Mao,Jinlong Wang,Bin Liu,Xiaobin Tang,Langming Bai,Guibai Li,Heng Liang
DBD/Fe(II)/PAA couples radical oxidation with in situ Fe(III) coagulation. • Plasma-driven Fe cycling sustains PAA activation and reduces pH sensitivity. • Pretreatment increased normalized NF flux by 125% and lowered R ir by 76%. • Humic-like fluorescence fell by ~90%, with complete micropollutant removal. • NF reduced total DBPs by 92% and additive cytotoxicity by 90%. Nanofiltration (NF) can polish landfill leachate but is constrained by rapid fouling by humic macromolecules and colloids. Here, we developed a dielectric barrier discharge (DBD)/Fe(II)/peracetic acid (PAA) pretreatment that couples radical oxidation with in situ coagulation to simultaneously transform macromolecular foulants and mitigate NF fouling. Mechanistic analyses revealed that DBD facilitates Fe(II)/Fe(III) redox transformation during PAA activation, while Fe(II) serves as the catalytic center for PAA activation and the precursor for in-situ Fe(III) flocs. This dynamic generates a suite of reactive species in which hydroxyl radicals ( • OH) dominate oxidation, supplemented by organic radicals (CH 3 C( O )O • , CH 3 C( O )OO • ) and high-valent Fe(IV) = O. Oxidation reduced humic-like fluorescence by approximately 90% and removed 90–95% of three model micropollutants. Concurrently, Fe(III) generated during PAA activation aggregated oxidized organics and colloids into larger, less negatively charged flocs. This coupled transformation increased normalized NF flux by 125% and decreased irreversible resistance by 76% relative to untreated leachate. The process remained effective at pH 11 because PAA decomposition and plasma chemistry acidified the reaction medium. Subsequent NF removed 92% of chlorinated disinfection byproducts and reduced additive cytotoxicity by 90%. Economic assessment indicates an operating cost of 5.76 USD ton −1 and a carbon footprint of 0.59 kg CO 2 -eq m −3 . Unlike conventional treatments, the DBD/Fe(II)/PAA process enables plasma-assisted Fe(II)/Fe(III) redox regeneration, coupling enhanced PAA activation with in situ iron coagulation to transform and remove refractory foulants for NF fouling mitigation. This work demonstrates a cost-effective and mechanistically robust pretreatment strategy for improving NF-based landfill leachate treatment. Download: Download high-res image (192KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·124716
·
IF 7.5
Rui Yang,Chaoting Jiang,Wangbo Wang,Xianshu Zhou,Fangshu Xie,Mingming Ta,Tuo Wang,Haifang Cai,Juan Guo,Weihuang Zhu
Fabricating a high-performance catalyst for peroxymonosulfate (PMS) activation via efficient nonradical pathways remains a crucial challenge. Herein, we developed a new strategy to fabricate an efficient PMS activator (FeCu@NBC 700 ) with synergistic Fe-Cu dual sites encapsulated in nitrogen (N) self-doped biochar derived from waste soybean dregs. The FeCu@NBC 700 catalyst achieved 98.55% tetracycline (TC) removal and 90.56% PMS utilization within 60 min, with excellent stability across varying pH conditions, realistic water matrices, and continuous-flow operation. Characterizations confirmed that the N-rich carbon matrix (NBC 700 ) facilitated the in-situ formations, enhanced stabilizations, and full dispersions of low-valence Fe(0)/Fe(II) and Cu(0)/Cu(I) species, which participated as main active components for PMS activation. Density Functional Theory (DFT) calculations on the Fe-Cu bimetallic system showed electronic coupling converges their d -band centers, optimizes PMS adsorption energy (-4.45 eV), and promotes multi-electron transfer (1.45 e⁻). Mechanistic studies, including quenching tests, electron paramagnetic resonance (EPR) tests, galvanic oxidation process (GOP), and methyl phenyl sulfoxide (PMSO) probing experiments, demonstrated that TC degradation proceeded via a multiple nonradical pathway dominated by singlet oxygen (¹O 2 ) from superoxide ( O • − 2 ) disproportionation, supplemented by an electron transfer pathway (ETP) and participation of high-valent metal species (HMS). Ecological Structure-Activity Relationship (ECOSAR) analysis and seed germination tests confirmed significant reductions in the toxicity of degradation intermediates. This work provides an insight into bimetallic synergy for multi-pathway nonradical oxidation applied in PMS-based Fenton-like reactions and a waste-valorization design paradigm.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Guangping Ma,Li Tian,Pengfei Han,Wenzhuo Wang,Hanyue Jiang,Ruixin Li,Huiyuan Mao,Tengying Ma,Juan Lu,Jing Wang
Construction of an electrochemical/colorimetric dual-mode sensing platform. • Ratiometric electrochemical method using methylene blue as an internal reference. • Pre-incubation strategy to activate the peroxidase-like activity of Cu-Fe@C. Ascorbic acid (AA) is an essential biomarker involved in numerous physiological processes, accurate and reliable detection remains a challenge. Herein, we constructed a novel dual-mode sensing platform integrating ratiometric electrochemical detection with pre-incubation-activated colorimetric sensing based on Cu-Fe@C (where ‘@C’ denotes the carbon matrix derived from the carbonization of the copper‑iron metal-organic framework, Cu-Fe-MOF) for self-calibrated AA detection. In the electrochemical mode, Cu-Fe@C exhibited excellent electrocatalytic activity toward AA oxidation, while methylene blue (MB) loaded on mesoporous carbon spheres (MCS) provided a stable internal reference peak at −0.2 V, enabling ratiometric analysis with a linear range of 2.0–720.0 μmol·L −1 and a detection limit of 0.67 μmol·L −1 (S/N = 3). In the colorimetric mode, pre-incubation with AA reduced Fe 3+ and Cu 2+ in Cu-Fe@C to Fe 2+ and Cu + , activating its Fenton-like activity to catalyze the H 2 O 2 -TMB (3,3′,5,5′-tetramethylbenzidine) system, producing a color response with a linear range of 1.0–79.0 μmol·L −1 and a detection limit of 0.33 μmol·L −1 (S/N = 3). The dual-mode configuration provides built-in cross-validation between two independent detection channels, substantially enhancing detection reliability. The sensor was successfully applied to AA determination in green tea and orange juice samples with recoveries of 93.5%–104.8%, demonstrating its practical utility for real-sample analysis. Scheme 1. Illustration of the principle of a dual-mode sensing platform for ascorbic acid based on Cu-Fe@C: ratiometric electrochemical detection and pre-incubation-activated colorimetric detection. Download: Download high-res image (139KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2025
·
IF 6.7
Dahua Yu,Qingdan Liao,Xitong Li,Fumin Liu,Jingxin Huang,Huilin Guan,Yizong Huang
The pore confinement environment critically restricts mass transfer efficiency in advanced oxidation process (AOPs). Hydrothermal carbons with hierarchical pore architectures significantly influence mass transfer of substances in AOPs, resulting in notable differences in performance. In this study, Fe-modified spent coffee grounds hydrothermal carbon (Fe@SCGSHC) contains Fe 2+ active sites, was synthesized using coffee grounds. We systematically compared the mass transfer and activation differences between persulfate (PMS) and hydrogen peroxide (H₂O₂) within a confinement pore environment, elucidating a micropore-mediated regulatory mechanism for performance of dual oxidizers. The diffusion constant of H₂O₂ ( K d₂ = 0.1953 mg/g·min 1/2 ) was 466 times greater than that of PMS ( K d₂ = 0.000419 mg/g·min 1/2 ). Besides, the oxidation rate constant of H₂O₂ increased from 0.026 to 8.481 (mg/L) −1 ·h −1 . 0.1 g Fe@SCGSHC achieved 100 % degradation of 5 mg/L sulfamethoxazole (SMX) within 5 min. The mechanistic study showed that the microporous structure enhances the Fe 2+ /Fe 3+ cycling within confined spaces, accelerating reaction kinetics and shifting traditional Fe-based catalysts from radical pathways (SO₄ •- , •OH) to singlet oxygen ( 1 O₂) pathways, revealing the selective advantage of micropores for H₂O₂ activation to generate 1 O₂. The stability experiments results indicated that 0.01 g Fe@SCGSHC achieved a 70.71 % removal of total organic carbon (TOC) in 5 mg/L SMX aquatic environments, exhibiting good anti-interference capability and ecological safety. In conclusion, the adoption of an appropriate pore structure can enhance the mass transfer efficiency of AOPs, leading to the effective degradation of pollutants. This study provides a scientific foundation for the preparation and modification of hydrothermal carbon and the mass transfer of substances in AOPs.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chenglong Qiu,Zhaowei Ji,Zongyan Li,Chunliu Zhu,Yafei Zhang,Weiqian Tian,Jingwei Chen,Kaisheng Xia,Lei Zhang,Minghua Huang,Zhi Li,Huanlei Wang
Advanced green hydrogen production systems typically rely on costly catalysts and face operational challenges in off-grid regions and extreme temperature environments. Herein, we propose a dual-purpose material strategy that synchronously converts marine polysaccharides into low-cost tri-functional electrocatalysts and weather-resistant gel electrolytes, enabling decarbonized hydrogen production in remote areas and under harsh temperature conditions. The constructed system demonstrated robust performance across temperatures ranging from −40 °C to 60 °C. A multiscale optimization approach modulates charge density at Fe active sites and metal-support interactions in Fe-based catalysts, achieving trifunctional activity (ORR: E 1/2 = 0.90 V; OER/HER: η = 261/172 mV@10 mA cm −2 ). Concurrently, hydrogen bond engineering transforms electrochemically inert agarose into highly compatible electrochemical interface gel electrolytes, enabling quasi-solid-state Zn-air batteries with extended operational temperature tolerance. This approach eliminates dependence on petroleum-derived materials while achieving carbon-neutral hydrogen production. Our work provides a mild, economical, and sustainable pathway for multidimensional marine biomass utilization and green hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2025
·
IF 12.1
Zi-Ye Liu,Jiu-Jiu Ge,Lei Yu,Sian-Hong Ong,Lian-Jian Zhang,Ji-Ming Hu
Efficient and durable alkaline water electrolysis at industrial current densities remains a key challenge due to sluggish oxygen evolution kinetics and poor stability of hydrogen evolution reaction (HER) catalysts in alkaline media. Herein, a unique Pt–Ni/Fe coordinated single-atom Pt catalyst anchored on nickel-iron layered double hydroxide (ePt/NiFe LDH), is reported synthesized via a facile electrodeposition process within 30 min. Unlike the conventional Pt-O-M (metal) coordination, the newly discovered Pt–Ni/Fe bonding structure significantly modulates the electronic structure of the NiFe active sites, thereby synergistically enhancing both HER and OER activities. Benefiting from this optimized coordination environment and the nanoflower architecture, the ePt/NiFe LDH@e-nf electrode delivers outstanding overall water splitting performance, achieving a low cell voltage of 1.42 V at 10 mA cm −2 and 1.54 V at 100 mA cm −2 without iR compensation. More importantly, it maintains ultrastable operation over 1440 h at an industrial-level current density of 500 mA cm −2 , outperforming commercial Pt/C–RuO₂ benchmarks. This work demonstrates a promising strategy for designing high-performance and durable single-atom catalysts for practical alkaline water electrolysis applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chen Wang,Yunpeng Zou,Xiaohui Wu,Xiangling Zhang,Wenjiao Sang,Tao Zhou,Mingjie Huang
Realizing efficiently sustainable generation of singlet oxygen ( 1 O 2 ) in the O 2 activation-based systems is crucial, since 1 O 2 can oxidize many organic pollutants via a non-radical pathway that is preferable in complex water matrices e.g. saline wastewaters. In this study, a boosted strategy that introduced oxygen vacancies (OVs) and surface carboxyl groups (−COOH) onto electron-rich copper‑iron oxides, was proposed by a facile mechanochemical ball-milling process with citrate ligands (Cit). Notably, the resulting Cit@CuFe 2.5 O x catalyst enabled efficient O 2 activation via a selective non-radical pathway, achieving a standardized pseudo-first-order rate constant ( k obs ) of 0.073 min −1 ·g −1 for sulfamethoxazole (SMX) degradation, with over 90 % of the oxidative contribution attributed to 1 O 2 . The ball-milling procedure with Cit could cause the generation of abundant OVs for O 2 adsorption and activation . Mechanistic analysis and theoretical calculations revealed that the OVs accelerated electron transfer from adjacent Cu(I) atoms to adsorbed O 2, facilitating the generation of O 2 − and markedly lowering the free energy barrier for its subsequent conversion to 1 O 2 other than H 2 O 2 . Additionally, the surface-bound −COOH groups facilitated the transformation of molecular O 2 to adsorbed O 2 at OVs sites, further lowering the thermodynamic barrier of the O 2 ⟶ O 2 − ⟶ 1 O 2 pathway. This study provides a simple and cost-effective promotional strategy for O 2 activation by ball-milled electron-rich materials, offering an easily obtained method to induce 1 O 2 -dominated oxidation of recalcitrant organic pollutants in the treatment of high-salinity wastewater.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Bolong Zhao,Yonggang Sun,Guangsuo Yu,Min Xu,Juan Zhang,Duoning Zhao,Yulong Ma
Nitrogen doping plays a crucial role in activating the Fenton catalytic activity of transition metal oxides. However, the mechanism by which nitrogen doping sites influence the properties of these oxides remains unclear. We successfully incorporated nitrogen atoms into the internal lattice of MnFe 2 O 4 spinel through thermal activation and identified two major doping sites: interstitial nitrogen (N int ) and substitutional nitrogen (N sub ). Through in-situ DIRFTS experiments and DFT calculations, we proposed a unique mechanism. Both sites can effectively activate the catalytic activity of the oxides, but N sub is particularly effective in altering the electron distribution of Mn elements within the lattice. This alteration promotes the transformation of superoxide (•O 2 – /•OOH) to H 2 O 2 , thereby further enhancing catalytic activity. Compared to un-doped MnFe 2 O 4 , experimental results obtained using MnFe 2 O 4 N 0.4 as the catalyst demonstrated that the degradation rate constant of tetracycline in simulated wastewater increased from 0.0072 min −1 to 0.2745 min −1 . Furthermore, the degradation rate of tetracycline reached 98.7 %. For real wastewater experiments, the COD removal rate was 77.4 %, and the mineralization rate was 62.5 %. This study offers new insights into the design of nitrogen-doped transition metal oxide catalysts.
✓ 已验证
产品关联
DOI
高影响因子