CARBON
·
2022
·
IF 11.307
Zhipeng Jin,Minggang Zhang,Hui Mei,Hongxia Liu,Longkai Pan,Yuekai Yan,Laifei Cheng,Litong Zhang
Solar evaporation is a sustainable, environmentally friendly and promising solution to the problem of fresh water shortage. However, the widespread application of solar evaporators is limited by their spatial geometry, surface salt deposition and durability. Here, a Janus evaporator with a 3D chiral torsion structure is designed using 3D printing technology. Such a structure increases the number of light reflections to improve light collection. At the same time, the top and bottom layers of the Janus evaporator are endowed with different surface wettability . In particular, the top layer of superhydrophobic SiO 2 /CNTs aerogel acts as a photothermal absorber and prevents salt deposition, while the bottom layer of superhydrophilic CNTs aerogel accelerates water replenishment and improves water transfer efficiency. At 1 sun, the 3D Janus evaporator exhibits a high evaporation rate of 2.775 kg m −2 h −1 and a solar-to-vapor conversion efficiency of 90.2%. The 3D Janus evaporator demonstrates a strong desalination capacity in simulated seawater and allows one to obtain fresh water above drinking water standards. Moreover, it can work sustainably in different environments and has good cycle stability. The 3D Janus evaporator, prepared by 3D printing, opens up new prospects and great potential to solve the issues associated with fresh water shortage.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Zhenyu Wang,Jinyang Li,Fuxi Peng,Hanpeng Deng,Jiayang Li,Wei Wei,Zuowan Zhou
It remains a significant challenge to develop a photothermal adsorbent with a heating response as fast as a joule-heating adsorbent and simultaneously possessing excellent mechanical stability and reusability for rapid oil cleaning. Here, we report a novel monolithic design to fabricate a photothermal hybrid sponge for rapid oil cleaning by integrating graphite interlayer compounds as photothermal units into the three-dimensional photothermal network of carbon nanotubes . This unique monolithic design enabled the hybrid sponge to present excellent photothermal performance: firstly, the superhydrophobic hybrid sponge has low thermal resistance resulting from the defectless surface; secondly, the photothermal units were weaved in the photothermal network, preventing detachment in the cycling and providing ultrafast photothermal heating rate. The hybrid sponge rises to 81 °C in merely 25 s under irradiation (1 Sun), superior to most photothermal oil adsorbents reported so far. This study provides a new structural design for constructing photothermal adsorbents with a fast-heating response for rapid crude oil cleaning.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2022
·Vol. 10
·期 33
·11924-11930
·
IF 8.067
Yuan Wang,Guangmin Xie,Jinglei Chen,Xiurong Zhang,Cong Chen,Jian Yin,Huanrong Li
Visible light as an excitation source is much more accessible than ultraviolet light, but the synthesis of lanthanide complex (LnC) films with visible-light excitation and high photoluminescence quantum yield (PLQY) is still a challenge. We report herein a visible light excitable and highly luminescent film by incorporation of a europium(III) (Eu3+) tetrakis(β-diketonate) complex with tetraphenylphosphonium as a counterion into a polymethyl methacrylate (PMMA) matrix. Excellent compatibility between the complex and PMMA was observed, resulting in the PMMA film with an 80 wt% loading content of the complex exhibiting a PLQY of up to 62.5% and a high transparency of ∼89%. As a proof-of-concept experiment, the luminescent film was used to fabricate luminescent solar concentrators (LSCs), in which the strong luminescence effect of the luminescent film is responsible for its optical conversion efficiency of 1.46% with a G of 1.87. This study presents a new model system for the development of highly transparent LSCs by utilizing high loading contents of LnCs.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Mingtai Hou,Zeyi Jiang,Fuqiang Chu,Xinru Zhang,Nien-Chu Lai
Organic phase change materials (PCMs) promise remarkable latent heat storage capacity but suffer from weak visible-light absorption capability and ultralow thermal conductivity for harvesting and conversion of clean solar energy. Herein, we design and synthesize a new core@shell structured n-eicosane@TiO 2 /TiN composite microcapsules which can realize 98.08 % of thermal energy storage capacity. By making use of the localized surface plasmon resonance of high-thermal-conductivity TiN , the prepared composite microcapsules possess a remarkable photo-thermal conversion efficiency up to 78.4 %. Plasmonics TiN can not only efficiently adsorb visible light and convert the optical energy into heat but also enhance thermal conductivity of the composite microcapsules, resulting in ultra-low supercooling degree of 1.02 o C. In addition, the composite microcapsules exhibit excellent phase change reversibility and thermal durability during the 100-cyclic scans. Our work offers new insights into designing high-performance microcapsuled PCMs in solar thermal applications, bringing great potential for renewable energy utilization beyond traditional fossil energy sources.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Tingting Song,Xiaoyan Meng,Huayu Wang,Chao Zhang,Ming Ge
Heterogeneous photocatalysis/persulfate oxidation process has been regarded as a promising technology for antibiotic contaminants removal. Magnetic ZnFe 2 O 4 /Ag composite catalyst was synthesized to activate peroxydisulfate (PDS) toward tetracycline (TC) degradation under the visible-LED-light irradiation. The synergistic effect of ZnFe 2 O 4 and Ag endowed the optimized ZFO/Ag-15 with excellent photocatalytic performance for PDS activation and TC degradation, and 90.06 % of TC (20 mg/L) was efficiently degraded after 80 min of reaction. Ag can enhance the visible light absorption of ZnFe 2 O 4 and accelerate the separation of photo-induced electron/hole pairs, thereby promoting the generation of O 2 − and SO 4 − radicals. In addition, Ag can directly activate PDS to generate SO 4 − . Although the catalytic performance of magnetic ZFO/Ag-15 gradually decreased after each cycle due to the corrosion of Ag and the formation of inactive AgO, the catalytic activity of used catalyst was partially recovered by heat treatment. Quenching experiments and EPR tests indicated that the free radical (O 2 − , SO 4 − and OH) and non-free radical ( 1 O 2 , h + ) oxidation processes cooperated to degrade TC in Vis-ZFO/Ag-15/PDS system. The effect of operational factors (PDS concentration, temperature, solution pH, coexisting inorganic anions and humic acid) on TC degradation was investigated, and TC removal from the different water matrices (river water, tap water and secondary effluent) was also evaluated. The degradation products were detected using LC-MS and the possible TC degradation pathways were established.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Yan Wang,Xinyao Shan,Yingjie Tang,Tianyu Liu,Binghan Li,Peng Jin,Kun Liang,Dingwei Li,Yang Michael Yang,Huaibin Shen,Bowen Zhu,Botao Ji
Developing techniques of advanced patterning for colloidal nanocrystals (NCs) is essential to construct high-performance electronic/optoelectronic devices. However, conventional NC patterning methods require complicated photolithography processes and/or delicately designed photocrosslinkers. Here, we develop a direct, photoresist-free method to pattern functional NCs while avoiding any photosensitive molecules. In our approach, the solubility of NCs is switched through cleaving native organic ligands under UV light exposure. Developing with the mother solvent produces fine patterns with feature sizes (as low as 10 μm) comparable to that of conventional photolithography. Importantly, the obtained patterns of NCs allow postpatterning ligand exchange. As representatives, we demonstrate patterned NC-based thin-film transistors (TFTs) and quantum dot light-emitting diodes (QLEDs). The In2O3 NC-based TFTs are turned from inactive to active using the patterning process and display substantially enhanced electronic performances upon ligand exchange with inorganic ligands. Furthermore, exquisite fluorescence quantum dot (QD) patterns are enabled. The QLEDs fabricated with ZnCl2-treated green QD patterns exhibit electroluminescence performances that are comparable to those of unpatterned QLEDs. Our strategy offers a powerful yet simple patterning technique for fabricating low-temperature thin-film electronics and optoelectronics, which is expected to be a versatile and extensible approach for solution-processed NC-based thin-film device manufacturing.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2022
·Vol. 29
·期 50
·76321-76338
·
IF 5.19
Song Tingting,He Quanbao,Meng Xiaoyan,He Zhangxing,Ge Ming
Heterogeneous photocatalysis/persulfate oxidation process has been considered as a promising technology for dye contaminants removal. The magnetic ZnFe 2 O 4 /active carbon (AC) composites were hydrothermally synthesized and firstly used to activate peroxydisulfate (PDS) for rhodamine B (RhB) degradation under visible LED light irradiation. The optimized Vis-ZnFe 2 O 4 /AC(4/1)-PDS system can enhance the RhB degradation efficiency by 32.01% and 13.87% compared with Vis-ZnFe 2 O 4 -PDS and Vis-AC-PDS systems, respectively. The influence of operational parameters such as catalyst dosage (0.2 − 0.4 g L −1 ), PDS concentration (1.0 − 2.0 g L −1 ), temperature (25 − 45 °C), solution pH (2.7 − 10.9), and coexisting inorganic ions (Cl − , NO 3 − , HCO 3 − , PO 4 3− , Cu 2+ , Fe 3+ , and Ca 2+ ) on RhB degradation was studied, and 100% of RhB (20 mg L −1 ) was degraded after 80 min at operational condition: 0.30 g L −1 of ZnFe 2 O 4 /AC(4/1) and 1.5 g L −1 of PDS, solution pH of 2.74, reaction temperature of 25 °C. The quenching experiments, EPR test, and XPS analysis were employed to reveal the proposed mechanism, which demonstrated that 1 O 2 played a more important role than other reactive species (SO 4 •− , •OH, O 2 •− , and h + ) in RhB degradation. The generation of 1 O 2 via the two routes was as follows: (i) the in situ formed active oxygen (O * ) reacted with HSO 5 − to produce 1 O 2 ; (ii) O 2 •− was oxidized by h + to form 1 O 2 . After five consecutive cycles, the photodegradation efficiency of RhB by ZnFe 2 O 4 /AC(4/1) catalyst slightly decreased from 88.52 to 83.92%, indicating the excellent reusability of ZnFe 2 O 4 /AC(4/1) photocatalyst. As designed, Vis-ZnFe 2 O 4 /AC-PDS oxidation system can effectively remove RhB from the different real water matrices, and the degradation efficiency of RhB in tap water, river water, and secondary effluent was 78.24%, 79.55%, and 74.53% after 80 min of reaction, respectively.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Jianjie Li,Xiaoli He,Huaide Jiang,Yi Xing,Bi Fu,Chengzhi Hu
Advances in the versatile design and synthesis of nanomaterials have imparted diverse functionalities to Janus micromotors as autonomous vehicles. However, a significant challenge remains in maneuvering Janus micromotors by following desired trajectories for on-demand motility and intelligent control due to the inherent rotational Brownian motion. Here, we present the enhanced and robust directional propulsion of light-activated Fe3O4@TiO2/Pt Janus micromotors by magnetic spinning and the Magnus effect. Once exposed to a low-intensity rotating magnetic field, the micromotors become physically actuated, and their rotational Brownian diffusion is quenched by the magnetic rotation. Photocatalytic propulsion can be triggered by unidirectional irradiation based on a self-electrophoretic mechanism. Thus, a transverse Magnus force can be generated due to the rotational motion and ballistic motion (photocatalytic propulsion) of the micromotors. Both the self-electrophoretic propulsion and the Magnus force are periodically changed due to the magnetic rotation, which results in an overall directed motion moving toward a trajectory with a deflection angle from the direction of incident light with enhanced speed, maneuverability, and steering robustness. Our study illustrates the admirable directional motion capabilities of light-driven Janus micromotors based on magnetic spinning and the Magnus effect, which unfolds a new paradigm for addressing the limitations of directionality control in the current asymmetric micromotors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Peng Zhu,Weizi Zhang,Qinfang Li,Haian Xia
Photocatalytic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is an environmental friendly way to convert platform molecules into high-value chemicals. Here, Au/ZnO catalysts with different oxygen vacancies were fabricated by the deposition precipitation method and were used for the photocatalytic oxidation of HMF to FDCA under visible light irradiation. All of the Au/ZnO catalysts showed excellent photocatalytic oxidation selectivity to FDCA greater than 90% under mild conditions. The Au/ZnODP-H catalyst treated by H2 afforded the highest HMF conversion and the selectivities of FDCA up to 96.9%. The localized surface plasmon resonance effect of Au nanoparticles, oxygen vacancy, and the existence of the Schottky barrier enhance the separation and transfer efficiency of photogenerated electron–hole pairs of the catalyst, so as to enhance its photocatalytic activity. The active species trapping experiment and electron spin resonance analysis showed that •O2– and h+ were the active species responsible for the oxidation reaction. The recycle experiment also proved that the catalyst has good stability. This work provides a new strategy for the design of photocatalysts for converting biomass into high-value chemicals.
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2022
·Vol. 12
·期 13
·2210
·
IF 5.719
Huiyong Wang,Hongmei Yu,Ayman AL-Zubi,Xiuhui Zhu,Guochao Nie,Shaoyan Wang,Wei Chen
The synthesis of room temperature phosphorescent carbon dots (RTP-CDs) without any matrix is important in various applications. In particular, RTP-CDs with dual modes of excitation are more interesting. Here, we successfully synthesized matrix-free carbonized polymer dots (CPDs) that can generate green RTP under visible and ultraviolet light dual-mode excitation. Using acrylic acid (AA) and ammonium oxalate as precursors, a simple one-pot hydrothermal method was selected to prepare AA-CPDs. Here, acrylic acid is easy to polymerize under high temperature and high pressure, which makes AA-CPDs form a dense cross-linked internal structure. Ammonium oxalate as a nitrogen source can form amino groups during the reaction, which reacts with a large number of pendant carboxyl groups on the polymer chains to further form a cross-linked structure. The carboxyl and amino groups on the surface of AA-CPDs are connected by intermolecular hydrogen bonds. These hydrogen bonds can provide space protection (isolation of oxygen) around the AA-CPDs phosphor, which can stably excite the triplet state. This self-matrix structure effectively inhibits the non-radiative transition by blocking the intramolecular motion of CPDs. Under the excitation of WLED and 365 nm ultraviolet light, AA-CPDs exhibit the phosphorescence emission at 464 nm and 476 nm, respectively. The naked-eye observation exceeds 5 s and 10 s, respectively, and the average lifetime at 365 nm excitation wavelength is as long as 412.03 ms. In addition, it successfully proved the potential application of AA-CPDs in image anti-counterfeiting.Keywords:carbon dots;room temperature phosphorescence;visible/ultraviolet light excitation;anti-counterfeiting
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIOMATERIALS
·
2022
·
IF 15.304
YiCong Li,DanRong Hu,Meng Pan,Ying Qu,BingYang Chu,JinFeng Liao,XiaoHan Zhou,QingYa Liu,Shuang Cheng,Yu Chen,Quan Wei,ZhiYong Qian
Currently, activatable photodynamic therapy (PDT) that is precisely regulated by endogenous or exogenous stimuli to selectively produce cytotoxic reactive oxygen species at the tumor site is urgently in demand. Herein, we fabricated a dual-activatable PDT nanosystem regulated by the redox tumor microenvironment and near-infrared (NIR) light-induced photothermal therapy (PTT). In this study, photosensitizer chlorin e6 (Ce6) was conjugated to hyaluronic acid (HA) via a diselenide bond to form an amphiphilic polymer (HSeC) for loading PTT agent IR780 to produce HSeC/IR nanoparticles (NPs). The photoactivity of Ce6 for PDT was “double-locked” by the aggregation-caused quenching (ACQ) effect and the fluorescence resonance energy transfer (FRET) from Ce6 to IR780 during blood circulation. After selective accumulation into tumors, HSeC/IR NPs were subsequently dissociated due to the “double-key”, which included diselenide bond dissociation under high redox conditions and IR780 degradation upon NIR laser irradiation , resulting in recovering Ce6. In vitro studies indicated that Ce6 photoactivity in HSeC/IR NPs was significantly suppressed when compared with free Ce6 or in HSeC NPs. Moreover, BALB/c mice treated with HSeC/IR NPs displayed distinctly alleviated skin damage during PDT. Synergetic cascaded PTT-PDT with superior tumor suppression was observed in SCC7 tumor-bearing mice. Therefore, the study findings could provide a promising treatment strategy for PTT-facilitated PDT with high antitumor efficacies and reduced skin phototoxicity levels.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2022
·
IF 4.644
Niandan He,Zongxue Yu,Guangcheng Yang,Xuyang Li,Qingcan Xiang,Qian Huang,Yucheng Liu
In this experiment, a photocatalyst with a Z-scheme heterojunction was constructed that g-C 3 N 4 nanosheets are connected with NH 2 -MIL-88 B(Fe) via carbon quantum dots (CDs) bridges (similar bridge structures) under solvothermal action, where g-C 3 N 4 nanosheets were prepared by nitric acid pretreatment and secondary thermal oxidation. The composite has higher photo-reduction efficiency of Cr (Ⅵ) and photodegradation efficiency of MB than that of single component. The rate of photocatalytic reduction of Cr (Ⅵ) by the composite material is 21.8 times of g-C 3 N 4 and 4.1 times of NH 2 -MIL-88 B(Fe)/CDs, respectively, and has better chemical stability and reusability. In the whole system, CDs not only acts as a bridge for electron transfer to induce π-π* transition, but also acts as an electron donor and acceptor due to its excellent charge characteristics. It can provide e − for the reduction of Cr (Ⅵ) and consume h + , which can effectively inhibit the recombination of e − /h + and improve the photocatalytic activity and efficiency. The mechanism of Z-Scheme charge transfer was further confirmed by the capture experiment of active species. The activity remains stable and efficient after four catalytic cycles, which offers great possibilities for practical production applications.
✓ 已验证
产品关联
DOI
高影响因子