APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2022
·Vol. 128
·期 7
·1-9
·
IF 2.983
Zhang Lei,Han Zhikun,Jia Yang,Han Yuzhen
Nitrogen oxides (NOx) could cause acid rain, photochemical smog, and even cause serious harm to human life and health and safety. Therefore, it was urgent to control and reduce NOx. In this paper, CeO 2 with a spherical structure was prepared by hydrothermal method, and the influence of different preparation conditions on the formation of CeO 2 was studied by orthogonal experiments. Then CeO 2 was used as the carrier, and a MnO 2 @CeO 2 core–shell catalyst with MnO 2 as the core and CeO 2 as the shell was developed. And it was successfully applied to SCO denitration. Through SEM, TEM and XRD characterization, the effects of different manganese-cerium ratios and core–shell morphology on the denitration performance were studied. The results showed that: (1) When the concentration of cerium chloride solution was 0.6 mol/L, urea was 30 g, glucose was 40 g, and the hydrothermal temperature is 200 ℃, the prepared CeO 2 catalyst had uniform particle size and high dispersibility. Its catalytic activity was better than that of catalysts prepared under other conditions, and the conversion rate of NO at 250 ℃ was up to 85%; (2) The denitration performance of the MnO 2 @CeO 2 composite3 catalyst was significantly better than that of the CeO 2 catalyst alone. At the same time, the MnO 2 @CeO 2 core–shell catalyst prepared with MnCl 2 ·4H 2 O as the manganese precursor had a better conversion rate of NO than that of the other two manganese precursor catalysts.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2022
·Vol. 33
·期 9
·6563-6575
·
IF 2.779
Li Jie,Xu Sai,Yu Yang,Liu Kaiying,Gao Yuefeng,Chen Baojiu
Multifunctional nanoparticles with marvelous temperature sensing and photothermal conversion are preferable in photothermal therapeutic applications. Herein, nanocomposites of NaYF 4 :Er 3+ /Yb 3+ @NaYF 4 :Nd 3+ /Yb 3+ core–shell upconversion nanoparticles (UCNPs) modified by polydopamine (PDA) were designed to achieve temperature sensing and efficiency of photothermal conversion. It has been found that under the irradiation of 808 nm laser, temperature sensing can be realized on the basis of the fluorescence intensity ratio of Er 3+ green light emission. In addition, the photothermal conversion ability of the UCNPs modified by PDA is greatly improved. Moreover, Nd 3+ as activator endows UNCPs excited by 808 nm, which can avoid overheating due to the absorption of the excitation band (980 nm) in water. Therefore, the multifunctional nanoparticles are expected to become an effective drug for cancer therapy in the future and this research will stimulate interest in designing multifunctional nanoparticles that are biocompatible, especially for in vivo tumor diagnosis.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
·
2020
·Vol. 29
·期 3
·1696-1705
·
IF 1.652
Xiao Zhu,Chen Rushi,Zhu Xuefeng,Li Zhou,Xu Guofu,Jia Yanlin,Zhang Yunhe
The copper–graphite metal matrix composites were prepared by powder metallurgy method using cuprous oxide and graphite as the raw materials. Their microstructure, relative density, hardness, electrical resistivity and the compressive strength of the cuprous oxide–graphite (Cu 2 O-Gr) composites were studied. This composite when compared with copper–graphite (Cu-Gr) composites using copper powder and graphite demonstrated that the new composite had finer microstructures with increased to the higher compression strength value. The Brinell hardness is about 1.5-1.6 times higher than the original material and the compressive strength increased by 50-100 MPa. The good parameters can be attributed to the redox reaction that occurs at the interface between cuprous oxide and graphite particles, resulting in uniform distribution of the reinforcements in matrix and strong interfacial bonding between the copper matrix and the graphite particles.
✓ 已验证
DOI
高影响因子
IRANIAN POLYMER JOURNAL
·
2020
·Vol. 29
·期 8
·669-677
·
IF 1.707
Lei Yuan,Shi Yiyuan,Jiang Liang,Lei Jingxin,Wu Bo
A novel class of photochromic copolymer based on spironaphthoxazine (SO) moieties was smoothly prepared through the copolymerization of methyl methacrylate (MMA), butyl acrylate (BA) and SO-based monomer by photopolymerization. Polymerization efficiency was studied by measuring the content of SO in eluents, which decreased with increasing mass ratio of SO in precursor monomer. The incorporated SO moieties endow the copolymers with remarkable photochromic ability. The novelty of this study is that unlike conventional physically blending photochromic polymer, SO moieties were chemically bonded with polymer chain, which is an effective way to prevent the SO from migration, thus increasing the stability and reliability during the long-term application. Moreover, the copolymerization was prepared through UV polymerization in the absence of organic solvent, which is environmentally friendly. Polymer chain flexibility can be well tuned by changing the mass ratio of BA. To make the copolymer more flexible, plasticizer of dibutyl phthalate (DBP) was also introduced. The photochromic ability of the as-prepared films was enhanced with increase in flexibility of polymer chain, which achieved the optimum state when the mass ratios of plasticizer DBP (dibutyl phthalate) and precursor BA (butyl methacrylate) were 20% and 50%, respectively. The thermal stability and tensile strength of the products were characterized by thermogravimetric analysis and electronic universal testing machine, which revealed that these copolymers could be applied as photochromic materials.
✓ 已验证
DOI
高影响因子
International Journal of Minerals Metallurgy and Materials
·
2022
·Vol. 29
·期 4
·787-795
·
IF 3.85
Zhang Bao,Xiao Jiusan,Jiao Shuqiang,Zhu Hongmin
Normal titanium oxycarbide exhibits an excellent electrical conductivity and a high carrier concentration of approximately 10 21 cm −3 ; however, the low Seebeck coefficient limits the thermoelectric application. In this study, first-principle calculations demonstrate that the metal vacancy of titanium oxycarbide weakens the density of state passing through the valence band at the Fermi level, impairing the carrier concentration and enhancing carrier mobility. Thermodynamic analysis justifies the formation of titanium oxycarbide with metal vacancy through solid-state reaction. Transmission electron microscopic images demonstrate the segregation of metal vacancy based on the observation of the defect-rich and single-crystal face-centered cubic regions. Metal vacancy triggers the formation of vacancy-rich and single-crystal face-centered cubic regions. The aggregation of metal vacancy leads to the formation of the vacancy-rich region and other regions with a semi-coherent interface, suppressing the carrier concentration from 1.71 × 10 21 to 4.5 × 10 20 cm −3 and resulting in the Seebeck coefficient from −11 µV/K of TiC 0.5 O 0.5 to −64 µV/K at 1073 K. Meanwhile, vacancies accelerate electron migration from 1.65 to 4.22 cm −2 ·V −1 ·s −1 , maintaining high conductivity. The figure of merit ( ZT ) increases more than five orders of magnitude via the introduction of metal vacancy, with the maximum figure of 2.11 × 10 −2 at 1073 K. These results indicate the potential thermoelectric application of metal-oxycarbide materials through vacancy engineering.
✓ 已验证
DOI
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2024
·Vol. 50
·期 6
·2897-2915
·
IF 2.8
Liu Zengcheng,Wang Zhongchao,Wang Yanfei
The phosphinimide materials described in this paper were synthesized by polymerization precipitation. The properties of complexes coordinated with metal ions can be used as adsorbents for the adsorption of radioactive elements by using ligands such as imide and phosphorus groups. Then, the synthetic phosphinimide was characterized in detail by FT-IR, SEM, EDS and XPS, and its morphology and structural changes were studied. In addition, the effects of the material on the removal of uranium(VI) from aqueous solutions at different pH, sorbent doses, contact times, initial concentrations, and temperatures were studied. The experimental data shows that the adsorption process can fit the pseudo-second-order kinetic model well, which is in line with the Langmuir isotherm model. The thermodynamic study of adsorption shows that the adsorption process is a spontaneous endothermic process. In addition, at a temperature of 303.15 K and pH = 6, the maximum adsorption of uranium(VI) by phosphinimide in 25 min can reach 234.6 mg g −1 , and a removal rate of 97.75%.
✓ 已验证
DOI
高影响因子
Science China-Chemistry
·
2024
·Vol. 67
·期 7
·2314-2324
·
IF 10.4
Liu Xue,Li Jiangao,Zhang Fei,Yan Dingyuan,Wang Lei,Wang Dong,Tang Ben Zhong
Light-driven cancer theranostics has shown inexhaustible and vigorous vitality by virtue of its high efficacy, prominent controllability and noninvasiveness. Exploration of an all-round theranostic material simultaneously affording both multimodal diagnosis imaging and synergistic phototherapy would be an appealing yet significantly challenging task. Herein, a novel nanomedicine Ir@PPEG-MeEPO was ingeniously constructed by integrating beforehand 1 O 2 -charged amphiphilic polymer and well-tailored Ir(III) complex IrDPTP, which was featured by second near-infrared (NIR-II) aggregation-induced emission (AIE) tendency, efficient reactive oxygen species (ROS) generation, good photothermal conversion efficiency and high-performance hydrogen gas production. To the best of our knowledge, IrDPTP held the longest emission wavelength among all reported AIE Ir (III) complexes. Moreover, Ir@PPEG-MeEPO was capable of controllably releasing ROS via triggered photothermal effect upon NIR irradiation, making it well-adapted to hypoxic environment of tumor. Those distinctive characteristics of Ir@PPEG-MeEPO endowed it with unprecedented performance on sextuple theranostics comprised of NIR-II fluorescence-photoacoustic-photothermal trimodal imaging and photodynamic-photothermal-hydrogen trimodal therapy, witnessed by the precise tumor diagnosis and complete tumor elimination. The study would open up new perspectives for the exploration of superior nanomedicine for practical cancer theranostics.
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2021
·Vol. 50
·期 11
·6237-6244
·
IF 1.938
Zhao Guixiang,Meng Yanshuang,Zhang Hongshuai,Duan Mingtao,Zhu Fuliang
The development of lithium–sulfur batteries is limited due to its notorious "shuttle effect". Heteroatoms are introduced to the host materials to absorb the polysulfides and further to alleviate the shuttle effect. Herein, porous carbon (NSPC) was successfully prepared by template method and used as sulfur host material. The results show that NSPC has a high specific surface area (697.19 m 2 g −1 ) and abundant heteroatom doping, which helps to enhance the capture and absorption of polysulfides. The prepared S@NSPC was loaded with 76% sulfur, and the composite electrode displayed excellent cycle stability because of its strong polysulfide absorption. The S@NSPC composite electrode shows high initial specific capacity of 741.8 mAh g −1 at 167.5 mA g −1 , the capacity of the S@NSPC composite electrode remained 609.8 mAh g −1 after 500 cycles, and the attenuation per cycle was only 0.027%, showing good stability.
✓ 已验证
DOI
高影响因子
Nano Research
·
2024
·Vol. 17
·期 7
·6550-6559
·
IF 9.5
Zhu Pengcheng,Mu Shuairong,Huang Wenhao,Sun Zeye,Lin Yuyang,Chen Ke,Pan Zhifeng,Haghighi Mohsen Golbon,Sedghi Roya,Wang Junlei,Mao Yanchao
Neurological electronic skin (E-skin) can process and transmit information in a distributed manner that achieves effective stimuli perception, holding great promise in neuroprosthetics and soft robotics. Neurological E-skin with multifunctional perception abilities can enable robots to precisely interact with the complex surrounding environment. However, current neurological E-skins that possess tactile, thermal, and visual perception abilities are usually prepared with rigid materials, bringing difficulties in realizing biologically synapse-like softness. Here, we report a soft multifunctional neurological E-skin (SMNE) comprised of a poly(3-hexylthiophene) (P3HT) nanofiber polymer semiconductor-based stretchable synaptic transistor and multiple soft artificial sensory receptors, which is capable of effectively perceiving force, thermal, and light stimuli. The stretchable synaptic transistor can convert electrical signals into transient channel currents analogous to the biological excitatory postsynaptic currents. And it also possesses both short-term and long-term synaptic plasticity that mimics the human memory system. By integrating a stretchable triboelectric nanogenerator, a soft thermoelectric device, and an elastic photodetector as artificial receptors, we further developed an SMNE that enables the robot to make precise actions in response to various surrounding stimuli. Compared with traditional neurological E-skin, our SMNE can maintain the softness and adaptability of biological synapses while perceiving multiple stimuli including force, temperature, and light. This SMNE could promote the advancement of E-skins for intelligent robot applications.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2021
·Vol. 32
·期 2
·1778-1786
·
IF 2.478
Ding Ling,Zeng Min,Wang Huan,Jiang XiaoBing
In the present study, to broaden the application of metal–organic framework (MOF) materials in electronic functional materials, a simple solvothermal method was adopted to introduce bimetals, and metal–organic framework compounds (MIL-101 (Fe), MIL-101 (Fe, Co), MIL-101 (Fe, Cu)) acted as the templates. The hollow structures of Fe 2 O 3 , CoFe 2 O 4 , and CuFe 2 O 4 were formed through the simple calcinations at 600 °C for 3 h in Ar atmosphere. When the mentioned materials exhibiting hollow structures were tested as the negative electrode of a lithium-ion battery, introducing bimetals was reported to be able to improve their electrochemical performance. For instance, CoFe 2 O 4 and CuFe 2 O 4 were cycled 300 times under a high current density of 1000 mA/g, and the reversible capacity remained to be 978 mAh/g and 774 mAh/g. When 200 cycles were performed under a current density of 200 mA/g, these materials exhibited high specific capacities of 1118 mAh/g and 1155 mAh/g.
✓ 已验证
DOI
高影响因子
Journal of Bionic Engineering
·
2021
·Vol. 18
·期 5
·1192-1201
·
IF 2.682
Chen Junyue,Cui Lingling,Yan Chengqi,Xiong Dangsheng
Hydrogel has been widely used in the research of bionic articular cartilage due to their similarity in structure and functional properties to natural articular cartilage. In this research, polyvinyl alcohol and betaine monomer were used as raw materials to prepare a high-strength double-network hydrogel by a combination of ultraviolet (UV) irradiation and freeze–thaw methods. The structure of samples was characterized by Fourier transform infrared spectroscopy and X-ray diffraction, and the morphology of the samples was characterized by scanning electron microscope and three-dimensional white light interferometer. In addition, we also studied the swelling ratio, water content, mechanical properties and tribological properties of the samples. We found that the addition of betaine monomer and the UV irradiation time had a positive effect on the mechanical properties and tribological properties of the samples.
✓ 已验证
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2021
·Vol. 15
·期 2
·1960-1972
·
IF 2.431
Qian Wen-Wen,Yang Si-Qi,Hu Shu-Min,Wang Xiao-Ling,Zhu Yuzhu,Zhou Tao
In order to make full use of brown algae Sargassum fusiforme , in the presence of pectinase and glucoamylase, the polysaccharide (SFP) from S. fusiforme was hydrolyzed to improve its biological activity. Single factor tests and response surface methodology were used to optimize enzymatic hydrolysis conditions based upon the degradation rate of SFP. Conditions for the hydrolysis of SFP were optimized as: hydrolysis temperature 54.2 °C, total enzyme concentration 68.5 U/mL, activity ratio of pectinase to glucoamylase 3.3:1, pH 6.0, degradation time 3 h. Under the optimized conditions, the degradation rate of SFP reached 18.6%. The antioxidant activities of the enzymatically degraded S. fusiforme polysaccharide (ESFP) prepared under the optimized conditions were greatly improved when compared to those of SFP. The IC 50 values of ESFP on scavenging HO˙, \({\text{O}}_2^{\cdot -}\) and DPPH˙ were 4.78, 0.412 and 0.53 mg/mL, respectively; while those for SFP were 6.82, 0.723 and 0.768 mg/mL, respectively. The ferric reducing power of ESFP was also significantly higher than that of SFP. After incubation with RAW264.7 macrophages for 24 and 48 h, ESFP was found to possess significantly stronger activities in promoting cell proliferation, phagocytosis and NO release than those of SFP, indicating the superior immunoregulatory activity of ESFP.
✓ 已验证
DOI
高影响因子