BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Fangqing Wei,Xiao Han,Ping Xu,Fei Tao
Metabolic rewiring of K. phaffii enables glycolic acid production from methanol. • Cofactor-neutral design relieves redox constraints in methanol assimilation • Glycolic acid titer reaches 41.2 g/L using methanol as the sole carbon source. • A record yield of 0.41 g/g is achieved in methanol-only bioconversion. Chemo-biological valorization of CO 2 into value-added chemicals, such as the biodegradable plastic monomer glycolic acid (GA), represents a promising frontier in sustainable manufacturing. However, the realization of this synergistic loop is hindered by the low carbon efficiency of C 1 bioconversion. Herein, we address this challenge by engineering an efficient methanol bioconversion platform that selectively upgrades CO 2 -derived methanol into GA. To address metabolic redox constraints inherent to methanol assimilation that severely limit carbon yield, we reprogrammed Komagataella phaffii by constructing a cofactor-neutral biosynthetic route that couples NADPH generation directly to GA formation. Combined with the elimination of competing carbon sinks, this design eradicates the redox constraints that typically limit C 1 assimilation. As a result, carbon flux toward GA surged by 4.6-fold while maintaining cellular fitness. Translating this rewired module to a 5-L bioreactor establishes a benchmark, achieving a titer of 41.2 g/L and the highest reported yield of 0.41 g/g for methanol-only bioconversion. Life-cycle assessment (LCA) reveals a 59.0% lower global warming potential (GWP) relative to fossil-based routes. This study establishes a high-efficiency methanol bioconversion platform for GA production, completing the CO 2 -to-GA loop and providing a sustainable route for the utilization of CO 2 -derived carbon resources. Download: Download high-res image (102KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yali Zhao,Mengxin Duan,Ying Zhang,Sibo Huang,Qingxin Guan,Wei Li
A pH-tunable metal–phenolic precursor enables uniform core–shell Fe 3 O 4 -FeC x @C. • P123 serves as structure-directing agent and defect inducer to create carbon vacancies. • Active H* may be adsorbed on carbon-defect sites, which suppresses undesirable over‑hydrogenation. • Fe 3 O 4 , Fe 2 C, and Fe 5 C 2 synergistically drive RWGS and C-C coupling to light olefins. • Catalyst achieves 54.95% CO 2 conversion, 45.48% light olefins selectivity, and 100 h stability. The conversion of CO 2 to light olefins via the reverse water-gas shift and Fischer-Tropsch synthesis (RWGS-FTS) tandem pathway offers a sustainable route to value-added chemicals, yet precise control over the catalyst microstructure remains challenging. Here, we report a defect-engineered core-shell catalyst, Fe 3 O 4 -FeC x @C, synthesized from pH-tunable metal-phenolic networks (MPNs) precursor and a P123 soft template. The MPNs ensure uniform dispersion of iron species, while P123 generates abundant carbon defects in the graphitic shell. The resulting Fe 3 O 4 -FeC x @C-P-p2 catalyst features a unique architecture where the core activates H 2 and CO 2 , and the defective shell may promote the adsorption of active hydrogen species, which could spatially decouple active H* from C C coupling. Combined with previous reports, Fe 3 O 4 and FeC x may work synergistically: Fe 3 O 4 could acts as active sites for the RWGS reaction, while FeC x facilitates C C coupling, offering an efficient strategy to boost light olefin selectivity in CO 2 hydrogenation. The carbon shell provides spatial confinement to prevent sintering, while defect sites may promote the adsorption of H*. Under optimized conditions, the catalyst achieves 54.95% CO 2 conversion and 45.48% light olefin selectivity, with no significant deactivation over 100 h. This work demonstrates a synergistic strategy combining defect engineering, hydrogen spillover, and phase cooperation for efficient CO 2 hydrogenation. A defect-rich graphitic carbon shell encapsulates an Fe 3 O 4 -FeC x core to form a core-shell catalyst via a metal-phenolic network (MPN) self-assembly strategy. The defective carbon layers may adsorb spillover active H*, tuning intermediate hydrogenation for higher olefin selectivity. This architecture achieves 54.95% CO 2 conversion and 45.48% light olefins selectivity, with outstanding stability over 100 h, providing a robust platform for efficient CO 2 -to-olefins conversion. Download: Download high-res image (181KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·Vol. 65
·期 35
·18572-18586
·
IF 3.9
Dai Yasen,Zhu Congfei,Wang Bingru,Gao Minjie,Ren Shuhang,Hou Yucui,Wu Weize
To
overcome the high energy consumption associated with
conventional
CO 2 capture and conversion processes, this study develops
an integrated strategy combining CO 2 capture and in situ hydrogenation to methanol using
a novel basic deep eutectic solvent (DES). The DES, composed of N,N,N ′ ,N ′ -tetraethylethylenediamine
(TEEDA) as a hydrogen bond acceptor and ethylene glycol (EG) as a
hydrogen bond donor (optimal molar ratio 1:20), serves as both a capture
medium and a reaction promoter. When coupled with a commercial Cu/ZnO/Al 2 O 3 catalyst, the system achieved efficient CO 2 capture (1.14 mmol·g –1 ) and direct in situ conversion. Under optimized conditions
(240 ° C, 8 MPa H 2 , 12 h), a methanol selectivity of
92.9% with a yield of 72.5% was attained; even at 180 ° C, a selectivity
of 96.0% with a yield of 57.5% was obtained. Control experiments confirmed
that the polar EG solvent enhances CO 2 conversion through
solvation effects, while the DES itself possesses no intrinsic catalytic
activity. Mechanistic studies indicate that CO 2 is captured
via the formation of alkyl carbonate ions, and subsequent hydrogenation
proceeds through a formate pathway. Density functional theory (DFT)
calculations further demonstrate that the polar DES environment reduces
the activation energy barrier for the rate-limiting H 2 heterolysis
step. The DES showed good recyclability over four cycles, and catalyst
deactivation was primarily attributed to sintering-induced loss of
Cu surface area. This work presents a viable DES-based integrated
process for CO 2 capture and valorization, highlighting
the solvent’s dual function and providing insights into the
design of efficient integrated capture–conversion systems.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·Vol. 9
·期 31
·14718-14729
·
IF 5.8
Wang Yizhou,Cao Jianxin,Yao Mengqin,Li Ziwei,Li Zhuxuan,Liu Fei
The
current reaction mechanism of cerium dioxide (CeO 2 ) catalyzing
the direct synthesis of dimethyl carbonate (DMC) from
carbon dioxide (CO 2 ) and methanol remains unclear. In this
study, we prepared hollow nanospheres of CeO 2 with different
shell thicknesses (CeO 2 –S– x h) by controlling the Ostwald ripening time to investigate the role
of surface hydroxyl groups in the catalytic process. Among these,
the DMC formation rate of CeO 2 –S–24 h was
20.6 mmol g cat –1 h –1 , which is
1.5 times that of CeO 2 –S–4 h. Combining X-ray
photoelectron spectroscopy (XPS) etching and in situ Fourier-transform
infrared spectroscopy (FTIR) analysis, we found that an appropriate
shell thickness can effectively suppress the inhibition of hydroxyl
group conversion caused by oxygen vacancy (Vo) migration, thereby
promoting the transformation of monomethyl carbonate (MMC) to methoxycarbonyl
(MC) and enhancing the DMC formation rate. This study provides insights
into the structural design of CeO 2 -based catalytic materials
and reveals the critical role of surface hydroxyl groups in the synthesis
of DMC.
✓ 已验证
DOI
高影响因子
ENERGY & FUELS
·
2025
·
IF 5.3
Zuozheng Liu,Furan Guo,Liang Ge,Shican Jiang,Xianjun Lang,Abhishek Dutta Chowdhury,Yanping Zheng,Kang Cheng,Ye Wang
The product of CO2 hydrogenation over Ru-based catalysts is still limited to those of CO and CH4. In this work, we attempt to realize the direct synthesis of C2+ hydrocarbons from CO2 hydrogenation by the relay of the reverse water–gas shift (RWGS) reaction and Fischer–Tropsch reaction over Ru catalysts. We employ a series of preparation methods to adjust the surface ratios of metallic Ru and Ru oxides (Ru0/Ruδ+), including alkali metal promotion, carbon coating, and the construction of bimetallic sites. It was found that an appropriate Ru0/Ruδ+ ratio at around 1.2 is beneficial to the formation of C2+ hydrocarbons, while a high Ru0 content catalyzes the formation of CH4, and a high Ruδ+ content promotes the RWGS reaction. Under 300 °C and 3 MPa, the optimized K-GaRu@C catalyst achieves a C2+ selectivity of 38% at a CO2 conversion of 31%. Our work highlights the universality of relay catalysis, which separates complicated reaction networks into a few controllable steps, thus allowing the selective synthesis of high-value products from CO2 hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2020
·Vol. 22
·期 21
·7552-7559
·
IF 9.48
Bing-Cai He,Chao Zhang,Pei-Pei Luo,Yu Li,Tong-Bu Lu
Photocatalytic CO2 reduction coupled with water oxidation provides a fascinating approach to mitigating the issues of global warming and energy shortage. Herein, a direct Z-scheme heterojunction of Co1-C3N4@α-Fe2O3 comprising a g-C3N4-supported single-atomic Co site catalyst (denoted as Co1-C3N4) and α-Fe2O3 nanorod arrays is fabricated for efficient CO2 reduction. A CO production rate of 14.9 μmol g−1 h−1 with a high CO selectivity (>99%) is achieved under visible-light irradiation without any sacrificial agents other than water. Time-resolved photoluminescence (TRPL) analysis reveals that both the Z-scheme mechanism and the single-atomic Co sites contribute to the prolonged lifetime of the photo-induced excitons. Moreover, the formation of the Z-scheme heterojunction would lead to an altered charge density of the single-atomic Co sites. In situ diffuse reflectance infrared Fourier-transform spectroscopy and anion adsorption measurements reveal that the key intermediate CO2− could be efficiently stabilized by the positively charged Co sites in Co1-C3N4@α-Fe2O3, thus enhancing the CO2 reduction performance. This work offers a new direction for the rational design of single-atomic site catalysts in artificial photosynthesis.
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Ping Shi,Xinghao Liu,Jian Qiu,Jian Lu,Wenbo Jiang,Weihu Zhang,Xingjian Sun,Mengying Ou,Jianfa Zhao,Yu Guo,Quanyu Zhao,Yuan Bai,Wenheng Jing
Microalgal carbon sequestration offers a promising pathway for CO 2 mitigation, yet its efficiency is largely constrained by inherently low gas-liquid mass transfer. Herein, we report an interfacial engineering strategy to construct a ZIF-8/MXene composite membrane via pressure-assisted filtration. The membrane features unique hydrophilic–hydrophobic channels, wherein hydrophilic MXene nanosheets and hydrophobic ZIF-8 nanosheets act synergistically to effectively decouple bubble refinement from mass transfer resistance. This structural design enables the stable generation of monodisperse CO 2 nanobubbles with a mode diameter of 118.2 nm and the concentration of 1.62 × 10 9 particles mL −1 . The potential electrostatic adsorption facilitated by natural divalent cations in the BG-11 medium significantly shortens the mass transfer distance. Consequently, this promotes the formation of a localized CO 2 pseudo supersaturated microenvironment around the microalgae. This localized CO 2 enrichment potentially downregulates the carbon-concentrating mechanism, suggesting a strategic reallocation of cellular energy toward accelerated biomass accumulation. Consequently, the integrated system achieves an unprecedented biomass productivity of 0.76 g L −1 , offering an innovative material-biological paradigm for light-driven carbon capture and utilization.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Renzhi Xiong,Dongchen Duan,Feiyan Shi,Wenjun Zheng,Yanhe Xiao,Baochang Cheng,Shuijin Lei
Photocatalytic CO 2 reduction is primarily limited by inefficient charge separation and insufficient thermodynamic driving force. To address these intertwined challenges, this study constructs a novel S-scheme heterojunction by integrating the ferroelectric layered perovskite Bi 3 TiNbO 9 with the lead-free double perovskite Cs 2 AgBiBr 6 , which synergistically couples an interfacial built-in electric field with an intrinsic ferroelectric polarization field. This dual-electric-field design facilitates the efficient separation and directional migration of photogenerated charge carriers while preserving strong redox capability, thereby simultaneously overcoming both kinetic and thermodynamic limitations. The developed heterojunction exhibits outstanding CO 2 photoreduction performance, delivering a CO yield of 42.6 μmol g −1 h −1 , which is 6.7 and 26.6 times higher than those of the individual Cs 2 AgBiBr 6 and Bi 3 TiNbO 9 components, respectively. Moreover, it demonstrates excellent stability, retaining 89.3% of its initial activity after 48 h of continuous operation. Comprehensive characterization and theoretical calculations collectively confirm: (i) the successful construction of an intimate S-scheme heterojunction; (ii) the presence of a ferroelectric polarization field; and (iii) a significantly reduced energy barrier for COOH* formation, which promotes CO 2 reduction. The integration of ferroelectric effects with S-scheme heterojunction engineering presented in this work provides a promising strategy for developing efficient solar energy conversion systems.
✓ 已验证
DOI
PubMed
高影响因子
Carbon Letters
·
2025
·
IF 5.8
Wang Shihui,Lei Yuyao,He Chao,Miao Junhe,Liu Yang,Xie Quanhua,Hassan Karimi-Maleh,Zhong Nianbing
In the pursuit of achieving in-situ real-time detection of methanol production rate during the photocatalytic reduction of CO 2 , we developed a methanol sensor using a copolymer-coated fiber Bragg gratings. The theoretical model of methanol measurement by sensor was established. The effect of methanol-selective sensitive material and its thickness on the performance of the sensor were investigated. Humidity and temperature interference to sensor measurements was compensated. Furthermore, TiO 2 photocatalyst was prepared and the photocatalytic reactor was constructed. The methanol production rate in the photocatalytic CO 2 reduction process was monitored by the prepared sensor in-situ. The results highlight that the fiber Bragg grating methanol sensor with 600 nm-thick poly(N-isopropylacrylamide)/polymethyl-methacrylate coating showed a high sensitivity, lower limit of detection, fast response and recovery speed, and high selectivity. The methanol generation rate of TiO 2 photocatalytic reduction of CO 2 measured by gas chromatograph and prepared fiber Bragg grating methanol sensor was 1.42 and 1.53 μmol/g-cat·h, respectively, the error of the two detection methods was 7.86%. This highlights the efficacy of the developed fiber Bragg grating methanol sensor for real-time in-situ detection of the methanol production rate during the photocatalytic reduction of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
PLASMA SOURCES SCIENCE & TECHNOLOGY
·
2023
·Vol. 32
·期 4
·045010
·
IF 3.8
Xu Tian,Dongyuan Wang,Bo Ouyang,Qiang Chen,Zhongwei Liu,Xinwei Wang
A novel plasma-assisted fluidized-bed atomic layer deposition process to synthesize Pd-Cu bimetallic nanoparticles is reported, using palladium hexafluoroacetylacetonate, copper(I)-N, N'-di-iso-propylacetamidinate and H2 plasma. The process allows us to uniformly deposit Pd-Cu nanoparticles in porous powder, which is a mixture of γ-Al2O3 (30 wt%), amorphous aluminum silicate (50 wt%) and molecular sieve (20 wt%) (ASM). With metal loadings of 13.1 and 2.5 mg g−1 for Pd and Cu, respectively, the afforded 13.1Pd-2.5Cu catalyst shows excellent catalytic performance for the hydrogenation of CO2 in a dielectric barrier discharge reactor with no intentional heating. Under the condition of discharge input power of 24.6 W, H2-to-CO2 ratio of 4 in feed gas, and gas hourly space velocity of 7595 h−1, the conversion of CO2 can reach as high as 38.0%, with the CH4 and CH3OH product selectivities of 6.7% and 12.8%, respectively. Density functional theory calculations are further employed to understand the associated CH3OH formation mechanism.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Fei-Fei Chen,Linghao Zhou,Chao Peng,Dantong Zhang,Lingyun Li,Dongfeng Xue,Yan Yu
Current heterojunction photocatalysts suffer from sluggish charge transfer due to the discontinuous interfaces at an atomic level. Herein, we report a NiO–Co 3 O 4 ultrathin lateral heterojunction using NiCo-based bimetal–organic layers as precursors. The atomic-resolution images display a unique continuous semi-coherent interface between NiO and Co 3 O 4 . The experimental results confirm that the continuous semi-coherent interfaces effectively expedite the electron transfer from NiO to Co 3 O 4 . Concomitantly, the electron transfer raises d -band center of Co 3 O 4 in NiO–Co 3 O 4 toward Fermi level, as revealed by the density functional theory calculations. As a result, the *COOH intermediate can be strongly bound on cobalt reactive centers. The successful modulation of charge transfer and intermediate binding by continuous semi-coherent interfaces leads to a remarkable gas yield of 22.67 mmol h −1 from photocatalytic CO 2 reduction over NiO–Co 3 O 4 . This work highlights the crucial roles of interface engineering in regulating carrier kinetics and surface reactions.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2023
·
IF 5.2
Xiaoxuan Guo,Fenglei Zhang,Yaseen Muhammad,Zhixiu Yang,Ruiping Wei,Lijing Gao,Guomin Xiao
The conversion of CO 2 into high value-added chemicals through efficient catalysis is an ideal strategy to reduce atmospheric CO 2 pollution and achieve carbon neutrality . Therefore, amino-functionalized organic polymer Cu@Co-PIL-N 4 loaded with highly dispersed CuI as a novel catalyst was developed. The functionalization of the surface and the high dispersion of the active phase integrate CO 2 capture and conversion into one catalytic system. The locally enriched CO 2 is converted to the easily activated carbon-oxygen negative ion by the action of primary or secondary amines. Thus, it is easier to achieve efficient preparation of α-alkylidene cyclic carbonates (STY = 20.8 h −1 ) by CO 2 carboxylative cyclization under mild conditions (25 °C, CO 2 pressure of 1 bar). The addition of a small amount of water to the cyclization system boosted domino reaction to convert the α-alkylidene cyclic carbonates to α-hydroxy ketones. The domino reaction also exhibited efficient catalytic activity and outstanding regioselectivity. In addition, the Cu@Co-PIL-N 4 catalyst exhibited excellent substrate expansion and cyclic regeneration for both reactions. This work promises great significance for further developing cost-effective and high-performance catalysts for the chemical conversion of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子