文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4021至4032个,产品总数8,185个

切换升序
LIGHT
CHEMOSPHERE · 2021 · IF 7.086

Carbon quantum dots sensitized 2D/2D carbon nitride nanosheets/bismuth tungstate for visible light photocatalytic degradation norfloxacin

Xinghao Liu,Zhaoguang Yang,Ying Yang,Haipu Li

A novel carbon quantum dots (CQDs) sensitized 2D/2D carbon nitride nanosheets and bismuth tungstate composite (CQD-CNs/BWO) was successfully prepared via the facile hydrothermal method and used for the photocatalytic degradation of norfloxacin (NOR). During 120 min irradiation test, CQD-CNs/BWO exhibited 9 and 1.76 times higher photocatalytic activity than CNs and BWO, respectively. CQDs and constructed 2D/2D structure could not only improve the light harvesting but also promote the generation and separation of electron-holes. The existing inorganic ions in solution (e.g. bicarbonate ions, chlorine ions, and sulfate ions) could inhibit NOR degradation. Based on the electron spin resonance and free radicals inhibition tests, the holes and superoxide radicals rather than hydroxyl radicals were the main reactive species. The intermediates and possible pathways were proposed, and the antibacterial activity of the treated solution after the reaction was evaluated via bacteriostatic tests. The prepared composite material with high photocatalytic activity and stability is potentially effective for the degradation of antibiotics in wastewater.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2021 ·Vol. 32 ·期 4 ·2107644 · IF 18.808

Vacuum-Assisted Preparation of High-Quality Quasi-2D Perovskite Thin Films for Large-Area Light-Emitting Diodes

Chaoran Chen,Linxiang Zeng,Zhengyan Jiang,Zhenhua Xu,Yijun Chen,Zhen Wang,Shi Chen,Baomin Xu,Yaohua Mai,Fei Guo

Recent years have witnessed marked progress in the electroluminescence efficiency of perovskite-based light emitting diodes (PeLEDs). Nevertheless, the majority of highly efficient devices feature only several square millimeters with the perovskite emitting layers deposited by nonscalable methods, which hinders their intriguing application in large-area lightings and displays. Here, a robust crystallization protocol is devised for the deposition of high-quality perovskite emitting layers by blade coating. Central to this method is the deployment of a vacuum process to the freshly coated precursor film, thereby achieving controllable crystallization kinetics by decoupling precursor deposition and the subsequent thermal annealing. Accordingly, dense and uniform perovskite thin films with efficient energy funneling among the evenly distributed 2D and 3D phases are obtained. PeLED devices based on the vacuum-processed quasi-2D cesium lead tribromide layers achieve high external quantum efficiencies of 8.24% and 6.12% on active areas of 0.12 and 1 cm 2 , respectively. The scalability of the technology is further demonstrated by fabricating a 3.5 × 3.5 cm 2 device with bright and uniform emitting characteristic. This work offers a viable approach for further advancing the performance of large-area PeLEDs by scalable methods.

CAS / MDL: 64-17-5 67-63-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry B · 2021 ·Vol. 9 ·期 44 ·9213-9220 · IF 6.331

A CORM loaded nanoplatform for single NIR light-activated bioimaging, gas therapy, and photothermal therapy in vitro

Shihao Pei,Jia-Bei Li,Zhuo Wang,Yao Xie,Jiabo Chen,Haifang Wang,Lining Sun

Carbon monoxide (CO) can cause mitochondrial dysfunction, inducing apoptosis of cancer cells, which sheds light on a potential alternative for cancer treatment. However, the existing CO-based compounds are inherently limited by their chemical nature, such as high biological toxicity and uncontrolled CO release. Therefore, a nanoplatform – UmPF – that addresses such pain points is urgently in demand. In this study, we have proposed a nanoplatform irradiated by near-infrared (NIR) light to release CO. Iron pentacarbonyl (Fe(CO)5) was loaded in the mesoporous polydopamine layer that was coated on rare-earth upconverting nanoparticles (UCNPs). The absorption wavelength of Fe(CO)5 overlaps with the emission bands of the UCNPs in the UV–visible light range, and therefore the emissions from the UCNPs can be used to incite Fe(CO)5 to control the release of CO. Besides, the catechol groups, which are abundant in the polydopamine structure, serve as an ideal locating spot to chelate with Fe(CO)5; in the meantime, the mesoporous structure of the polydopamine layer improves the loading efficiency of Fe(CO)5 and reduces its biological toxicity. The photothermal effect (PTT) of the polydopamine layer is highly controllable by adjusting the external laser intensity, irradiation time and the thickness of the polydopamine layer. The results illustrate that the combination of CO gas therapy (GT) and polydopamine PTT brought by the final nanoplatform can be synergistic in killing cancer cells in vitro. More importantly, the possible toxic side effects can be effectively prevented from affecting the organism, since CO will not be released in this system without near-infrared light radiation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
WATER RESEARCH · 2021 · IF 11.236

Enhanced bezafibrate degradation and power generation via the simultaneous PMS activation in visible light photocatalytic fuel cell

Xiangyu Chen,Juanjuan Yao,Hongsen Dong,Mingjian Hong,Naiyun Gao,Zhi Zhang,Wenchao Jiang

A collaborative system including peroxymonosulfate (PMS) activation in a photocatalytic fuel cell (PFC) with an BiOI/TiO 2 nanotube arrays p-n type heterojunction as photoanode under visible light (PFC(BiOI/TNA)/PMS/vis system) was established. Xenon lamp was used as the light source of visible light. A 4.6 times higher pseudo-first-order bezafibrate (BZF) degradation rate constant was achieved in this system compared with the single PFC(BiOI/TNA)/vis system. The radical quenching experiments revealed that the contribution of reactive oxidative species (ROS) followed the order of 1 O 2 ≈ h + >> •OH > SO 4 •− >>O 2 •− . The EPR tests demonstrated that PMS addition enlarged the formation of 1 O 2 , •OH and SO 4 •− , but suppressed O 2 •− yield. Interestingly, 1 O 2 was further proved to dominantly originated from the priority reaction between positive photoinduced holes ( h + ) and negatively charged PMS. Besides, N 2 -purging tests and density functional theory calculation indicated that PMS probably reacted with residual photoinduced electron ( e − ) on the more negative conduction band (CB) of BiOI to form •OH and SO 4 •− , but competed with dissolved oxygen. Other e − transferred to the less negative CB of TNA through p-n junction will efficiently move to cathode through the external circuit. The greatly promoted power generation of PFC system was observed after PMS addition due to extra h + consumption and efficient e − separation and transfer. Besides, three possible pathways for BZF degradation were proposed including hydroxylation, fibrate chain substituent and amino bond fracture. This study can provide new insights into the mechanisms of PMS assisted photocatalysis and accompanying energy recovery.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MATERIALS RESEARCH BULLETIN · 2021 · IF 4.641

MOF derived carbon modified porous TiO2 mixed-phase junction with efficient visible-light photocatalysis for cyclohexane oxidation

Guang Xu,Ying Zhang,Dandan Peng,Donghai Sheng,Yao Zhang,Ye Tian,Di Ma

In this paper, carbon modified porous TiO 2 mixed-phase junction was successfully fabricated by using the MIL-125(Ti)-P25 composite as the precursor. The porous TiO 2 possessed abundant pores and large surface area inherited from its precursor during a simple one-step pyrolysis in a crucible, and the modified TiO 2 showed catalytic activity for photocatalytic cyclohexane oxidation. Moreover, the ratios of anatase/rutile TiO 2 and carbon contents in the modified TiO 2 mixed-phase junction can be regulated conveniently. Among the mixed-phase porous TiO 2 , the C TiO 2 –4 sample containing 12.4 wt% rutile TiO 2 presented the best photocatalytic activity, which was also much better than those of carbon modified pure anatase or rutile TiO 2 . The carbon modification was characterized by carbon doping and surface carbon species, which played the vital role in enhancing the photocatalytic activity of the mixed-phase TiO 2 . Carbon doping into TiO 2 lattice can effectively reduce its band gap energy and extend the light response range. The carbon species on the TiO 2 surface can improve the light absorption efficiency and promote the transport of photogenerated electrons. Free radicals capture experiments demonstrated that •OH and •O 2 − radicals were important active species in the cyclohexane oxidation reaction. This work provides a MOF-mediated P25-assisted synthesis strategy that may guide the design of other photocatalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry C · 2021 ·Vol. 9 ·期 46 ·16682-16692 · IF 7.393

Improving the efficiency and stability of inorganic red perovskite light-emitting diodes using traces of zinc ions

Xiao-Yi Cai,Yi Yu,Yong-Chun Ye,Yang Shen,Ming-Lei Guo,Jing-Kun Wang,Kong-Chao Shen,Yan-Qing Li,Jian-Xin Tang

Metal halide perovskite light-emitting diodes (PeLEDs) have been recognized as emerging candidates for next-generation solution-processed electronic display technology, and great progress has been made in recent years. However, their poor operational stability is yet to be solved. Here, we present a reformative all-inorganic red-emission PeLED based on the passivation effect caused by the incorporation of zinc ions into perovskites for enhancing the efficiency and operational stability. A high-quality quasi-two-dimensional perovskite CsPbI3−xBrx thin film with good crystallinity is obtained, benefiting from the combination of large organic ammonium ions (PEA+ ions) and inorganic salt zinc iodide (ZnI2). As a result, ZnI2-passivated CsPbI3−xBrx PeLEDs emitting at 666 nm show a maximum external quantum efficiency of 9.93% and a maximum brightness of 4258 cd m−2. More importantly, the PeLEDs achieve a long half-lifetime of about 2667 h at an initial luminance of 100 cd m−2. This work provides a facile method to obtain stable and efficient red-emission PeLEDs.

CAS / MDL: 10139-47-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMOSPHERE · 2021 · IF 7.086

Oxygen defects-induced charge transfer in Bi7O9I3 for enhancing oxygen activation and visible-light degradation of BPA

Ran Ma,Sai Zhang,Xuewei Liu,Mingtai Sun,Jianzhong Cao,Jian Wang,Suhua Wang,Tao Wen,Xiangke Wang

Two-dimensional (2D) bismuth-based semiconductors have aroused intensive concern owing to their prominent photocatalytic activity for organic pollutants removal . In this work, a facile strategy for introducing oxygen vacancy in Bi-based oxyiodides (Bi x O y I z ) sheet-like architectures to activate molecular oxygen was proposed. The structure, photoelectric properties and visible light (λ > 420 nm) induced photocatalytic activities of these samples for decomposition of bisphenol A (BPA) were systematically characterized and evaluated. The as-prepared Bi 7 O 9 I 3 with a feeding Bi/I molar ratio of 1:1 exhibited the best photocatalytic activity comparable to those of similarly synthesized Bi 7 O 9 I 3 with other molar ratios and BiOIO 3 catalysts. The optimal Bi 7 O 9 I 3 achieved excellent photocatalytic activity with 99.6 % degradation efficiency of BPA within 20 min and superior structural stability with 95.1 % degradation retention over 5 cycling tests. In addition, the resulting Bi 7 O 9 I 3 sample displayed a high mineralization efficiency of BPA. Importantly, the plenty of oxygen vacancies (V o s) exsiting in Bi 7 O 9 I 3 played the dominant role in both accelerating electron transfer and activating molecular oxygen to facilitate the generation of superoxide radical (O 2 ·- ) and singlet oxygen ( 1 O 2 ), thereby proceeding oxidative degradation of BPA molecules during photoreactions. The efforts and attempts are also extendable to synthesis other 2D photocatalysts, providing potential for effective charge-carrier separation and molecular oxygen activation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Advanced Healthcare Materials · 2021 ·Vol. 10 ·期 20 ·2100938 · IF 9.933

Near-Infrared Light-Triggered Polyprodrug/siRNA Loaded Upconversion Nanoparticles for Multi-Modality Imaging and Synergistic Cancer Therapy

Gaizhen Kuang,Hongtong Lu,Shasha He,Hejian Xiong,Jie Yu,Qingfei Zhang,Yubin Huang

Stimuli-responsive nanosystems have been widely applied as effective modalities for drug/gene co-delivery in cancer treatment. However, precise spatiotemporal manipulations of drug/gene co-delivery, as well as multi-modality imaging-guided cancer therapy, still remain a daunting challenge. Here, multifunctional polyprodrug/siRNA loaded upconversion nanoparticles (UCNPs) are reported that combine computed tomography (CT), magnetic resonance (MR), and upconversion luminescence (UCL) tri-modality imaging and near-infrared (NIR) light-activated drug/gene on-demand delivery. The photoactivatable platinum(IV) (Pt(IV))-backbone polymers (PPt) and the siRNA targeting polo-like kinase 1 (Plk1) are loaded on the surface of polyethyleneimine (PEI)-coated UCNPs (PUCNP) to obtain the multifunctional polyprodrug/siRNA loaded UCNPs (PUCNP@Pt@siPlk1). The PUCNP@Pt@siPlk1 can be served as a “nanotransducer” to convert NIR light (980 nm) into local ultraviolet (UV) to visible light for the cleavage of photosensitive PPt, resulting in the simultaneous on-demand release of high toxic platinum(II) (Pt(II)) and siPlk1. Meanwhile, the PUCNP@Pt@siPlk1 has CT, T 1 -weighted MR, and UCL tri-modality imaging abilities. Based on these merits, PUCNP@Pt@siPlk1 displayed excellent synergistic therapeutic efficacy via image-guided and NIR light-activated platinum-based chemotherapy and RNA interfering in vitro and in vivo. Thus, this developed nanosystem with NIR light-controlled drug/gene delivery and multi-modality imaging abilities, will display great potential in combining chemotherapy and gene therapy.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2021 · IF 3.764

Z-Scheme Core–Shell meso-TiO2@ZnIn2S4/Ti3C2 MXene Enhances Visible Light-Driven CO2-to-CH4 Selectivity

Ke Wang,Xianhe Li,Nan Wang,Quanhao Shen,Maochang Liu,Jiancheng Zhou,Naixu Li

Solar photocatalysis has long relied on the rational design of semiconductor photocatalysts. Herein, a ternary meso-TiO2@ZnIn2S4/Ti3C2 MXene photocatalyst is prepared and demonstrated with a core–shell structure accompanied by few-layered Ti3C2 Mxene on the ZnIn2S4 shell. The success of the synthesis depends on a two-step method consisting of hydrothermal and electrostatic self-assembly procedures. The ternary heterojunction exhibits a good behavior for photocatalytic CO2 reduction. A mechanism study of the photocatalytic reaction indicates that the photogenerated charges transfer in a Z-scheme pathway. Moreover, the construction of the Schottky junction between metallic Ti3C2 and TiO2@ZnIn2S4 is extremely effective for the reduction reaction. Consequently, the photocatalytic rates toward CO and CH4 production are up to 30.5 and 34.0 μmol/g within 3 h of illumination by simulated sunlight, respectively, while the CH4 selectivity reaches 52.7%. This work provides a good strategy to achieve highly efficient photocatalytic CO2 reduction.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
OPTICS EXPRESS · 2021 ·Vol. 29 ·期 6 ·8997-9011 · IF 3.894

Tunable white light emission of an anti-ultraviolet rare-earth polysiloxane phosphors based on near UV chips

Yongchao Wang,Yongchao Wang,Yining Zhang,Dongxin Li,Dongxin Li,Aiqin Zhang,Aiqin Zhang,Hua Wang,Hua Wang,Husheng Jia,Husheng Jia,Bingshe Xu,Bingshe Xu

A novel white-light copolymer matched with 365 nm chips is prepared by bonding the vinyl-functionalized complexes Eu(TTA)2(Phen)(MAA), Tb(p-BBA)3(UA) and Zn(BTZ)(UA) to polysiloxaneprepolymer(synthesized by polycondensation of vinyltrimethoxysilane and diphenylsilanediol) through a technical route of polymerization after coordination. Its structure was characterized by infrared and ultraviolet. Under the excitation of 365 nm, when the ratio of the tricolor complexes is controlled to be 0.5: 3: 1.5, white light copolymer with CIE color coordinates of (0.327, 0.321) was obtained and packaged to get white light LED devices. After aging, the CIE color coordinates of the device change from (0.325, 0.329) to (0.341, 0.348), the color rendering index changes from 91 to 88, and the correlated color temperature changes from 5967 K to 5612 K. The loss of brightness is only 10.4%, which shows good resistance to UV aging. Moreover, the initial decomposition temperature of the copolymer is 235°C. The above results show that the bonding-type anti-ultraviolet copolymer phosphor has potential application in near ultraviolet LEDs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2021 · IF 19.503

Gear-shaped mesoporous NH2-MIL-53(Al)/CdS P-N heterojunctions as efficient visible-light-driven photocatalysts

Huanan Zhao,Zipeng Xing,Siyi Su,Sijia Song,Zhenzi Li,Wei Zhou

NH 2 -MIL-53(Al)/CdS p-n heterojunctions are fabricated via facile two-step hydrothermal method. The formation of p-n heterojunctions could form built-in field, which favors spatial charge separation. The resultant NH 2 -MIL-53(Al)/CdS p-n heterojunctions with narrowed band gap extend the photoresponse, and have a high specific surface area of 417.7 m 2 g −1 , and a narrow pore size of 8.8 nm. Under visible light irradiation, the photocatalytic efficiency for reduction of Cr(VI) and removal of refractory pesticide trichlorophenol is up to 99.23 and 98.85 %, respectively. The photocatalytic oxygen evolution is also as high as 563.6 μmol g −1 h −1 . The excellent photocatalytic activity can be ascribed to the efficient p-n heterojunctions accelerating charge transfer and favoring spatial charge separation, and the special mesoporous structure supplying adequate surface-active sites and facilitating mass transfer. This facile strategy opens up new insights for fabricating other p-n heterojunctions photocatalysts with efficient solar energy conversion.

CAS / MDL: 5743-04-4 1313-84-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2021 ·Vol. 11 ·期 34 ·21084-21096 · IF 3.361

In situ formation of 2-thiobarbituric acid incorporated g-C3N4 for enhanced visible-light-driven photocatalytic performance

Tingting Chen,Shan Hu,Quanfeng Xing,Xiaofeng Yu,Jinming Chen,Xiaolong Li,Xiuquan Xu,Bo Zhang

Embedding heterocycles into the skeleton of g-C3N4 has been proved to be a simple and efficient strategy for improving light response and the separation of photo-excited charges. Herein, 2-thiobarbituric acid incorporated g-C3N4 (TBA/CN) with good photocatalytic efficiency for Rh B degradation and H2 production was successfully achieved via a facile thermal copolymerization approach. The incorporation of aromatics and S atoms into the skeleton of g-C3N4 was identified via systematic characterizations. This unique structure contributed to the narrowed band-gap, extended delocalization of lone pair electrons and changed electron transition pathway, which led to the enhanced visible light utilization, accelerated charge migration and prolonged electron lifetime, subsequently resulting in the significant boost of photocatalytic activity. The optimal TBA/CN-3 sample yielded the largest Rh B degradation rate constant k value of 0.0273 min−1 and simultaneously highest rate of H2 evolution of 0.438 mmol g−1 h−1, which were almost 3.5 and 3.8 folds as fast as that of the pristine CN, respectively. Finally, the photocatalytic mechanism was proposed for the detailed elucidation of the process of Rh B degradation coupled with H2 production.

CAS / MDL: 57-13-6 504-17-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。