JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2024
·
IF 11.2
Rong Liu,Yan Gao
Preparing metal-organic frameworks (MOFs) film in situ on the surface of the Ti-6Al-4V (TC4) titanium alloy is challenging owing to the dense and stable surface TiO 2 passive film. In this study, titanium-doped zirconium-based MOFs (Zr(Ti)-MOFs) film was constructed in situ on the TC4 alloy in one step at a low temperature and atmospheric pressure, with ZrCl 4 as the source of Zr metal ions. ZrCl 4 attacked and dissolved the TiO 2 film to form Zr-O-Ti bonds on the surface of TC4 to provide nucleation sites for further reactions. At the same time, Zr 4+ and dissolved Ti 4+ combined in solution to form Ti containing Zr-O cluster nodes, which aggregated and grafted to the Zr-O-Ti bonds on the substrate surface, and reacted with organic ligands (terephthalic acid) to form Zr(Ti)-MOFs film. The Ti 4+ dissolved from the TC4 participate in the Zr-MOFs formation, thereby changing the high temperature and high-pressure conditions required for the traditional preparation of Zr-MOFs (UiO-66). The in situ preparation of Zr(Ti)-MOFs on TC4 was achieved at 80°C under atmospheric pressure conditions. This study elucidated the growth mechanism of Zr(Ti)-MOFs on the TC4 surface, providing a reference for the design and in-situ preparation of multifunctional MOFs on the TC4 titanium alloy.
✓ 已验证
产品关联
DOI
高影响因子
WATER SCIENCE AND TECHNOLOGY
·
2024
·Vol. 90
·期 2
·649-663
·
IF 2.5
Zou Yulong,Zhao Haiqian,Zhang Xiaolong,Wang Zhonghua,Yang Xue,Zhang Xing
View large Download slide View large Download slide Close modal The mechanism of phenol degradation by micro-electrolytic systems can be fully understood by evaluating the oxidation of active substances from the two aspects of phenol bond-breaking and mineralization, and the direction of promoting the generation of active substances is pointed out. In this article, the effects of H 2 O 2 , O 2 -• , ·OH and 1 O 2 in the degradation of phenol were analyzed using phenol and chemical oxygen demand (COD) removal rates as judgment indicators, respectively. And the addition of C 6 O 8 H 6 to the micro-electrolysis system was adopted to promote the generation of active substances. The experimental results showed that the active substances which played a dominant effect in the process of phenol bond-breaking and mineralization were changed. While 1 O 2 is dominant in the bond-breaking of phenol, •OH is dominant in the mineralization of phenol. After adding C 6 O 8 H 6 (1 mmol/L), the removal rates of phenol and COD were increased by 7.35 and 4.85%, respectively. This was attributed to the autoxidation reaction of C 6 O 8 H 6 and the continuous supply of H + while reducing Fe 3+ to Fe 2+ . Additionally, the C 6 O 8 H 6 regulated the reaction pathway to improve the utilization of H 2 O 2 . This study provides a new perspective for the understanding of active substances in micro-electrolysis systems. The main active substances in the bond-breaking and mineralization are different. is the main active substance in the phenol bond-breaking process. •OH is the main active substance in the phenol mineralization process. C 6 O 8 H 6 can promote the formation of active substances in the system. C 6 O 8 H 6 can promote the Fe 2+ /Fe 3+ cycle and improve the utilization of •OH.
✓ 已验证
产品关联
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2025
·
IF 6.1
Qibao Yang,Shaobai Sang,Fuyun Yang,Yawei Li,Tianbin Zhu,Heng Wang
RO-R 2 O-Al 2 O 3 -SiO 2 enamel coatings with varying Al 2 O 3 and MgO contents were prepared for the oxidation protection of 06Ni9DR alloy steels at 1100–1200 °C. The oxidation protection ratios of these coatings were investigated under different oxidation temperatures and time, and the degradation mechanism as well as the improvements in oxidation protection were explored. The results revealed that the oxidation protection ratio of traditional enamel coating with low crystalline phase content significantly decreased with oxidation test temperatures and time. The viscosity of the liquid phase in coating reduced with temperatures, facilitating oxygen diffusion. Additionally, the interaction between the coating and the oxidation products of alloy steel further reduced the liquid phase viscosity, decreasing coating thickness and shortening oxygen diffusion paths. However, the oxidation protection of coating with higher Al 2 O 3 and MgO content were enhanced. These coatings exhibited higher crystalline phases content, which effectively increased the apparent viscosity of enamel coating and prolonged oxygen diffusion paths. The thermal stability of coating with high crystalline phases content also were improved. Among these coatings, the coating with 27.47 wt% Al 2 O 3 and 9.93 wt% MgO achieved superior oxidation protection, up to 92.1 %, 76.6 %, and 73.4 % at 1100 °C, 1150 °C, and 1200 °C for 180 min, respectively.
✓ 已验证
产品关联
DOI
高影响因子
AFRICAN JOURNAL OF BIOTECHNOLOGY
·
2017
·Vol. 16
·期 50
·2307-2316
·
IF 0
Haiyuan Liu,Shu Han,Liping Xie,Jie Pan,Wei Zhang,Guihua Gong,Youjia Hu
2-C-Methyl-D-erythritol-4-phosphate (MEP) pathway has been extensively employed for terpenoids biosynthesis in Escherichia coli. In this study, to obtain key-enzymes of MEP pathway for squalene production, overexpression of different combination of MEP pathway genes were compared. Squalene production in strain YSS12 with overexpressed dxs, idi and ispA of MEP pathway from E. coli was improved by 71-fold when compared with strain YSS3 which only contained double copy SQS. Analysis of transcriptional levels of MEP pathway genes in engineering strains showed that different squalene production can be attributed to changed transcriptional levels of co-overexpressed genes dxs, idi, ispG and ispA in engineering strains. Furthermore, different E. coli expression hosts were compared for squalene production, among which BL21(DE3) was the best squalene producer. These results illustrate that dxs, idi and ispA of the MEP pathway from E. coli were key-enzymes for squalene production in E. coli. These key-enzymes of MEP pathway could also be applied to other terpenoids production in E. coli.
✓ 已验证
产品关联
DOI
PubMed
Nanoscale
·
2024
·Vol. 16
·期 48
·22273-22282
·
IF 5.8
Feng Li,Kairen Zhao,Yan Jin,Baoxin Li
Currently, water treatment usually requires additional light illumination or oxidants for the degradation of organic pollutants, which increases the costs and is not conducive to practical application. In this study, carbon vacancy-modified Fe–N–C single-atom catalysts (Cv-Fe–N–C SACs) were prepared through one simple acid-etching and pyrolysis process. Interestingly, we found that Cv-Fe–N–C SACs could degrade organic pollutants without any external assistance (such as oxidants or light illumination). The Cv-Fe–N–C SACs could remove over 99% of Rhodamine B (RhB) within 10 min at room temperature. The degradation of organic pollutants with the Cv-Fe–N–C SACs was attributed to their ability to activate dissolved oxygen for producing superoxide (O2˙−). In addition, the catalysts showed high activity over a broad pH range (3–11) and held rather good stability after 5 recycles. This study proved that the Cv-Fe–N–C SACs are highly efficient catalysts for degrading organic pollutants. These catalysts have the potential to make sewage treatment more efficient and less expensive.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Tao Shan,Sunzai Ke,Xin Yang,Xuhui Yang,Bo Weng,Lijuan Shen,Min-Quan Yang
Photocatalytic selective oxidation of aromatic hydrocarbons plays an important role in the production of value-added chemicals. A key step in this process is the activation of C(sp 3 )-H bond by photogenerated holes. However, the inadequate hole generation and lack of surface adsorption-activation sites severely hinders the improvement in photocatalytic C-H bond oxidation. In particular, the random charge migration to the surface impedes the effective capture of holes by surface active sites to dissociate the C(sp 3 )-H bond. Here, we design and fabricate a Co 3 O 4 /Cs 3 Sb 2 Br 9 p-n heterojunction that effectively addresses these challenges. The p-n heterojunction forms strong built-in electric fields (BEF) facilitating spatial charge separation. Holes are accumulated on Co 3 O 4 , while electrons are accumulated on Cs 3 Sb 2 Br 9 , thereby offering abundant active holes and electrons. Moreover, Co 3 O 4 shows stronger adsorption and activation capacity for the C(sp³)-H bond, enabling the C(sp 3 )-H bond dissociation with low reaction energy barrier. Consequently, the holes are directionally extracted from photoactive Cs 3 Sb 2 Br 9 to catalytically active Co 3 O 4 under visible light irradiation, thereby accelerating the toluene oxidation. The optimized 5 % Co 3 O 4 /Cs 3 Sb 2 Br 9 exhibits a benzyl aldehyde (BAD) evolution rate of 5044 μmol g −1 h −1 and a benzyl alcohol (BA) production rate of 1820 μmol g −1 h −1 , which are 12 and 17 times higher than that of blank Cs 3 Sb 2 Br 9 , respectively.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2025
·
IF 13.1
Tingting Xiao,Jingrong Li,Jian Li,Qihang Gong,Peikai Luo,Xinluona Su,Haiyang Cheng,Chao Zhang,Fengyu Zhao
The hydrogenolysis of cellulose-derived 5-hydroxymethylfurfural is essential for the production of fuels and chemicals from biomass. Herein, we fabricated a phosphorus-doped Pd/P-TiO2 catalyst for the hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran. A large number of defects and electron-deficient Ti4+ sites (dTi4+) were formed by doping phosphorus into the TiO2 support, which could promote hydrogen spillover and reactant adsorption. Moreover, the spilled active hydrogen induced the formation of P–O(H)-dTi4+, which acted as a “Brønsted acidic site” to promote the activation of C–O bonds. Consequently, the Pd/P-TiO2 catalyst exhibited superb activity for the hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran at mild conditions of 150 °C under 1 MPa H2.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE
·
2024
·
IF 3.3
Kangyu Zhao,Xin Long,Junle Li,Ying Wang,Ping Lan,Yong Wang
BACKGROUND The Maillard reaction involves the interaction of various amino acids and reducing sugars, resulting in food browning. It often produces appealing aromas and flavors. The complexities of the reaction are such that it can be challenging to identify the often numerous and frequently volatile products formed by it. In the present study, we sought to identify and evaluate an unusual product with anti-oxidant activity arising from a fructose-histidine Maillard reaction model. The anti-oxidant profile of this product was assessed by computational means. RESULTS The fructose-histidine Maillard reaction products (FH-MRPs) were generated by heating a 2:1 mixture of the sugar and the amino acid at 140 °C for 2 h. Chromatographically separable fractions, labelled DM-1 to DM-8, were obtained using silica gel as the stationary phase and dichloromethane/methanol (DCM/MeOH) mixtures as the mobile one. Fraction DM-5 exhibited the highest 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, and further bio-assay guided fractionation led to isolation and identification of 1-(1 H -imidazo[4,5- c ]pyridin-4-yl)ethenone (IMPE) as the active principal, the structure of which was established by nuclear magnetic resonance (NMR) spectroscopic and mass spectral techniques. A mechanism for the formation of IMPE from its precursors is proposed. Density functional theory (DFT) calculations suggest this novel heterocyclic compound exerts its anti-oxidant effects by interacting with DPPH and 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals. Essentially, IMPE was non-toxic below 300 ug mL −1 , showing a concentration-dependent free radical clearance capacity and reducing power within the 100–1000 μg mL −1 range, and moreover, exhibiting significant Fe 2+ chelating abilities wihin the 50-200 μg mL −1 range. CONCLUSION This study identified the unique FH-MRP, IMPE, and found that it acts as food antioxidant through the chelation of metal ions. © 2024 Society of Chemical Industry.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2025
·Vol. 172
·期 3
·030507
·
IF 3.3
Junchao Sun,Jing Jiang,Jianjiang He,Lan Cao,Qingfu Wang
The silicon-carbon (Si/C) anode offers a significantly higher theoretical specific capacity compared to conventional graphite anodes, while also demonstrating reduced volume expansion and enhanced cycling stability compared to pure silicon anodes. Consequently, Si/C anodes have attracted considerable attention as promising candidates for next-generation high-energy lithium-ion battery anode materials. However, volume expansion remains a critical challenge, leading to the detachment of active materials from the current collector (copper foil) and adversely affecting cycling performance. In this study, we introduce diglycidyl ether (EG) as a cross-linking agent to synthesize a novel three-dimensional cross-linked carboxymethyl chitosan (CCS-EG) binder for Si/C600 anodes (theoretical specific capacity of 600 mAh g−1 at 0.1 C). Electrochemical testing reveals that the CCS-EG binder significantly improves the cycling stability of the Si/C anode, achieving a capacity retention rate of 88.68% after 400 cycles at a current density of 0.5 C, compared to only 67.71% for the anode using the linear carboxymethyl chitosan binder. Furthermore, CCS-EG offers advantages such as low cost, ease of preparation, and environmental sustainability, making it a promising candidate for commercialization as a binder in next-generation high-energy lithium-ion batteries.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2024
·
IF 18.5
Chuyang Liu,Taian He,Congcong Hu,Qi Qian,Yilin Hao,Lu Xu,Hengyi Lu,Guangbin Ji
In contemporary times, radar and infrared-compatible stealth materials have emerged as a pivotal domain of research globally, aimed at augmenting the survivability of military assets. However, current candidates generally exhibit subpar compatibility performance in elevated temperature environments due to the imbalanced interplay between the two spectral bands. In this work, a meticulously designed sandwich-structure SiO 2 /C@SiC/SiO 2 composite is proposed to cope with the challenge. The middle layer of C@SiC composites possesses excellent microwave absorption performance even at high temperatures. The outer layers of SiO 2 aerogels serve not only to inhibit the infrared radiation intensity, but also reinforce the microwave absorption capacity by optimizing the impedance matching and reducing the heat transferred to the middle layer. Based on the numerical simulation outcomes, the thickness of each layer has been optimized to attain a harmonious balance between microwave absorption and infrared radiation properties. Ultimately, the sandwich structured SiO 2 /C@SiC/SiO 2 composites demonstrate low RL (reflection loss) values (←5 dB) across nearly the entire X band (8–12 GHz), alongside minimal surface temperatures hovering ≈44 °C at an ambient temperature of 200 °C. The comprehensive investigation into impact patterns and underlying mechanisms offers invaluable insights to develop radar and infrared-compatible stealth materials for high-temperature applications, which can be applied as stealth coatings on the skin of high Mach number aircraft.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Xutao Yan,Haifeng Li,Zirui Li,Jihui Sun,Yijian Liu,Jiabao Zang,Li Sun,Meijie Zhang
Eu substituted Ba 3 Co 2- x Eu x Fe 24 O 41 (Co 2- x Eu x Z, x = 0, 0.5, 1) hexaferrites with multilayer nanoplate stacked and thickened along the c -axis were prepared without applying an external magnetic field to improve their microwave absorption performance. The crystal phase, structure and morphology of Ba 3 Co 2- x Eu x Fe 24 O 41 (Ba 3 Co 2- x Eu x Z) hexaferrites and the electromagnetic parameters and microwave absorption performance of Ba 3 Co 2- x Eu x Z hexaferrite/paraffin composites were characterized and analyzed. The maximum effective absorption bandwidth ( EAB max ) of Co 1.5 Eu 0.5 Z reached up to 8.21 GHz (5.37 GHz 13.58 GHz) at a coating thickness of 2.9 mm. Especially, when the coating thickness was only 3.4 mm, its EAB was 7.65 GHz (4.10 GHz 11.75 GHz), almost covering both the C and X bands, showing the excellent low frequency absorption performance. Meanwhile, the electromagnetic wave (EMW) dissipation mechanism of the samples was surveyed and dominated by the dipole polarization, interfacial polarization, natural resonance and exchange resonance. The impedance matching and EMW absorption performance of Ba 3 Co 2- x Eu x Z hexaferrites were finely regulated by Eu substituted Co and the multilayer nanoplate stacked structure.
✓ 已验证
产品关联
DOI
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2024
·
IF 6
Tianyue Xu,Ke Wang,Junjie Zhang,Yongzhi Cheng,Jiale Wei,Rui Duan
6S-5-methyltetrahydrofolate calcium salt crystal form C (MTHF-CAC) is a stable form of active folate. Compared with folic acid, MTHF-CAC is unaffected by the polymorphism of genes for folate-metabolizing enzymes and can be directly absorbed by the human body. In this study, MTHF-CAC was characterized by XRD, FTIR, DSC, and TGA. The effects of temperature, light, pH, and freeze–thaw cycles on the stability of MTHF-CAC solution were studied. The protective effects of ascorbic acid (AA) and cysteine (Cys) on MTHF-CAC were investigated by HPLC. The retention rate of MTHF-CAC solution was 82.6% after 6 days of storage at 4 °C but only 0.8% after heating at 75 °C for 330 min. Under UHT conditions, AA and Cys exerted protective effects on MTHF-CAC. 120 μg/mL of AA and Cys increased the retention of MTHF-CAC by 89.9% and 85.3%, respectively. The protective effect of AA was better than that of Cys. The research on the characterization and stability of MTHF-CAC provided the basic information for its application in the food industry.
✓ 已验证
产品关联
DOI
高影响因子