CARBON
·
2023
·
IF 10.9
Linyi Wu,Yipei Li,Binghua Zhou,Jian Liu,Deliang Cheng,Shien Guo,Keng Xu,Cailei Yuan,Mingxi Wang,Gan Jet Hong Melvin,Josue Ortiz-Medina,Sajjad Ali,Teng Yang,Yoong Ahm Kim,Zhipeng Wang
Coupling graphene-based materials with SiC nanostructures is one of the most feasible strategies to improve the photocatalytic CO 2 reduction performance. Here, we synthesized the vertical graphene (VG) sheets on the SiC nanowires achieved from rice husks to form the VG@SiC/C composite, in which the VG sheets possess high surface area, excellent electrical conductivity , and chemical stability, and the SiC nanowires have a suitable bandgap for sunlight absorption. The resulting VG@SiC/C composite provides an enhanced photocatalytic reduction of CO 2 to CO and CH 4 , yielding CO and CH 4 evolution yields of 25.5 and 2.3 μmol g −1 h −1 , respectively. The achieved CO yield is maximal so far among the SiC-based photocatalysts . The defective VG sheets promote the absorption of sunlight, enhance the CO 2 adsorption and activation, increase the separation of photogenerated electron-hole pairs, improve the activity of photocatalyst, and thereby prompt the photocatalytic reduction of CO 2 to CO with high yield and selectivity.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Pan Ma,Meili Ding,Ying Zhang,Wei Rong,Jianfeng Yao
The heterogeneous catalytic conversion of carbon dioxide (CO 2 ) conversion is an appealing yet highly challenging task. Introducing target-specific active sites into solid catalysts provides an alternative but promising way for boosting the chemical fixation of CO 2 . Here, we designed a lanthanide (III) complex with 1-vinyl imidazole (Vim) and immobilized it with DUT-5 by a combination of coordination and in situ polymerization. The resultant La-Vim/DUT-5 with high porosity and multiple active sites achieves a catalytic yield of 94% for CO 2 cycloaddition of epichlorohydrin, much superior to that of each component. More importantly, such catalytic activities can be well maintained using simulated flue gas as C1 source under both dry and humid conditions. This work opens up a novel and general avenue to tailor the chemical functionality of MOFs for capturing and converting CO 2 under actual conditions.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Shengnan Zhong,Lina Tian,Lixin Yi,Yifan Liu,Weiguo Cheng,Yibo Wang,Yunong Li
Among various strategies for CO 2 chemical fixation, the CO 2 cycloaddition with epoxides is one of the most promising and efficient approaches, in which ionic liquid (ILs) is a typical relatively environmentally friendly catalyst and medium. However, ILs decomposition and catalytic stability have not been in-depth investigated, and the structure-activity relationship of cations and anions has remained obscure, which would affect the understanding of catalytic behavior and catalyst loss, and limit the theoretical research and industrial application in CO 2 utilization. Therefore, based on a variety of phosphonium ILs we have designed and synthesized for CO 2 cycloaddition, the structure-activity relationship, steric hindrance and electronic effect of various anions and cations have been systematically studied in main and side reactions. Especially, a regulation strategy of cationic flexible steric hindrance and anionic electron effect have been developed to improve both ILs’ activity and stability. Remarkably, the synergistic action of electron-donating effect, hydrogen bond and decreased acidity from flexible steric alkyl groups result in the spatial shielding of cation center and enhancement of the Br's leaving. Consequently, the quaternary phosphonium ILs with asymmetric flexible steric hindrance exhibit the optimal performance, showing propylene oxide (PO) conversion of 99.15% and propylene carbonate (PC) yield of 98.86%, which can efficiently decrease the formation of phosphine oxide, avoiding the decomposition of ILs. This discovery provides a new idea for developing stable and efficient CO 2 fixation system in sustainable industry.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2023
·
IF 6
Chaojie Pang,Jiage Liu,Rui Peng,Yingying Guo,Zhiyong Li,Huiyong Wang
Titanium disulfide nanosheets (TiS 2 NSs) have attracted considerable research interest due to their eco-friendliness and outstanding electrical transport properties. However, the large scale preparation of TiS 2 NSs usually is plagued by the employ of poisonous solvents and low production. Herein, we develop a green, highly efficient and scalable tactic to exfoliate bulk TiS 2 powders in aqueous ionic liquids solutions under ambient conditions. This result shows that the exfoliation yield can reach 57.6 %, which surpasses the most values for the liquid-phase exfoliation of TiS 2 reported in literatures. The thickness of TiS 2 NSs is mainly in the range of 1 nm to 2 nm, and the lateral dimension is up to a few hundreds of nanometers. The molecular geometry and anionic alkalinity of the ionic liquids play key roles in the delamination and stability of TiS 2 NSs. In addition, TiS 2 NSs have been used as catalysts in the electrocatalytic CO 2 to CO conversion with the faradaic efficiency of 68.7 %, which is six times that by the bulk TiS 2 powder. Thus, the liquid phase delamination approach reported in this work has a great potential in manufacturing 2D layer materials for high activity electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2023
·
IF 6.2
Tianbo Jia,Linlin Wang,Lina Zhang,Zhouhao Zhu,Kun Zhang,Baikang Zhu,Xin Li,Chunyang Zhai,Shunli Li,Yingtang Zhou,Hengcong Tao
Electrochemical carbon dioxide reduction (ECR) to ethylene by using renewable energy is a viable way to tackle the global climate change, and beneficial to facilitate closing the carbon cycle . Herein, a sulfur-doped spherical coral-like CuO (S-CuO) catalyst was facile synthesized, which is enabling efficient conversion CO 2 -to-C 2 H 4 . The obtained 5% S-CuO can reach the Faradaic efficiency (C 2 H 4 ) of 48.4% with a current density of 15 mA cm −2 at -1.3 V vs. RHE, which maintained stability over 20 h in 0.1 M KHCO 3 electrolyte. XPS , SEM, TEM, and XRD were applied in the characterization of the materials. EPR, CO 2 adsorption measurements and density functional theory calculations results indicate that the incorporation of S can promote CO 2 adsorption, activation and the formation of *COOH intermediate, which is boosting CO 2 conversion enabling the high selectivity to C 2 H 4 . Compared to unmodified CuO, electrocatalytic studies show that the greatly increased C 2 H 4 activity on S-CuO is because of the fast electron transfer . Meanwhile, the contact angle measurement reveals the excellent selectivity is derived from the suppression of the hydrogen evolution reaction after the S doping.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2023
·Vol. 27
·期 5
·1269-1278
·
IF 2.5
Li Minzhang,Xu Junyuan,Qi Fei,Wang Yu,Yan Chunliu,Xu Jiaju
A tetrafluoro substituted CoPc (CoF 4 Pc), which is well dispersed in N,N-dimethylformamide (DMF), was used to modify carbon nanotubes (CNTs) via a facile sonication method, resulting in CoF 4 Pc nanorods with the length lower than 30 nm on the CNT surface. The as-fabricated CoF 4 Pc-CNT composites showed superior CO 2 RR catalytic activity compared with that of individual CoF 4 Pc, due to enhanced mass transfer and electrical conductivity arising from the CNT substrate. The CoF 4 Pc-CNT composite with the CoF 4 Pc/CNT weight ratio of 2:30 exhibited the highest CO current density of 29.0 mA cm −2 and CO selectivity of 91.8% at − 0.85 V vs. reversible hydrogen electrode (RHE) in a flow cell setup containing 0.5 M KHCO 3 , which was ascribed to enhanced charge transfer induced by highly dispersion of CoF 4 Pc nanorods, and good conductivity of CNT substrates. The work provides new insights for developing low-cost, effective, phthalocyanine-based catalysts for electrochemical CO 2 RR.
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2023
·
IF 4.6
Chan Meng,Heming Zhang,Qian Su,Hanwen Yan,Changyuan Du,Yunong Li,Li Dong,Weiguo Cheng
In view of the harsh conditions of cyclic esterification reaction of ethylene glycol (EG) and carbon dioxide (CO 2 ) to synthesize ethylene carbonate (EC), the yield is low and the catalysts are mostly metals, a series of green acid-base bicentric ionic liquids (ABbILs) were developed. Among them, the ABbILs of 1,5,7-Triazabicyclo[4.4.0]dec‑5-ene glutarimide ([TBDH][Glu]) had the best catalytic performance. Under the optimal reaction conditions, the yield of EC reached 29.5%, which was higher than most of the conventional metal-based catalysts. Through activity screening results and DFT calculation, it was found that different cations affect the interaction between N on anion and H proton of EG, and the H on the cation can activate the O on EG, which would affect the ability of ABbILs to activate EG. The acid-base bicentered synergistic catalytic mechanism of Bronsted acid and Lewis base was proposed by characterization and DFT calculation. This study opens up new avenues for the efficient conversion of diols and CO 2 for the preparation of cyclic carbonates.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Zhen Huang,Liangri Ying,Fengchun Gong,Shule Liu,Weilong Wang,Jing Ding
Selective capture of CO 2 is one of the most effective strategies for combating the greenhouse effect. In this study, we report the synthesis of a novel adsorbent—an amine-based cobalt-aluminum layered hydroxide with a hafnium/titanium metal coordination polymer (denoted as Co-Al-LDH@Hf/Ti-MCP-AS)—through the derivatization of metal–organic frameworks (MOFs) for selective CO 2 adsorption and separation. Co-Al-LDH@Hf/Ti-MCP-AS achieved the maximum CO 2 adsorption capacity of 2.57 mmol g −1 at 25 °C and 0.1 MPa. The adsorption behavior followed the pseudo-second-order kinetics and Freundlich isotherm models, indicating that chemisorption occurs on a non-homogeneous surface. Co-Al-LDH@Hf/Ti-MCP-AS also exhibited selective CO 2 adsorption in CO 2 /N 2 and excellent stability over six adsorption–desorption cycles. An in-depth analysis of the adsorption mechanism through X-ray photoelectron spectroscopy and density-functional theory and frontier molecular orbital calculations revealed that adsorption occurs through acid–base interactions between amine functional groups and CO 2 and that the tertiary amines (N3) have the highest affinity toward CO 2 . Our study provides a novel strategy for designing high-performance adsorbents for CO 2 adsorption and separation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2023
·
IF 4.2
Qilong Peng,Yu Chen,Diyi Fang,Chuanlei Liu,Kongguo Wu,Yuxiang Chen,Hao Jiang,Yuanyuan Sun,Qiumin Wu,Di Wu,Hui Sun
ETS-4 shows great potential to achieve effective separation of challenging mixtures due to its promising tunability of pores. However, the regulation of pore size is largely limited by its low thermal stability. Here, Na-ETS-4 was synthesized by the hydrothermal method and additionally modified via ion exchange coupled with thermal treatment. Structures of all synthesized samples were examined using a variety of characterization techniques. Both adsorption equilibrium and kinetics of CO2 and CH4 on these adsorbents were evaluated on custom-made adsorption units. In addition, the mechanism of CO2 adsorption on different structural models of ETS-4 was revealed via combining with the molecular dynamics (MD) simulations. Ion exchange largely improves the thermal stability of ETS-4 and its adsorption capacities for CO2 and CH4. Ba-ETS-4-350 exhibits the largest equilibrium selectivity of 12.42 and the greatest Henry’s selectivity of 2178.51. The radial distribution function (RDF) results reveal the main adsorption sites of CO2 in different ETS-4 structures.
✓ 已验证
产品关联
DOI
高影响因子
TETRAHEDRON
·
2023
·
IF 2.1
Yi Liu,Weilu Ding,Yongzhen Li,Ming Li,Ying Liu,Yunong Li,Qian Su,Zifeng Yang
In this work, we designed a novel thermally stable Zn bromide-based deep eutectic ionic liquid (DEIL), synthesized from tetralkylphosphonium bromide (Bu 4 PBr) and ZnBr 2 by a facile heating method. The structural changes and the physical properties of the catalyst were in-depth investigated. Among all the DEILs, ZnBr 2 ·2Bu 4 PBr showed high activity, achieved 98.2% propylene carbonate (PC) yield at a low catalyst usage (0.15 mol%), and remained good stabilities for 8 cycles. Furthermore, based on experimental results and DFT calculations, we found that Bu 4 P + cation of DEIL served as a frame charge-balanced species interacting with three possible anions of ZnBr 4 2− , ZnBr 3 − and Br − . The interaction is accompanied by a reversible pre-equilibrium in which [Bu 4 P] 2 [ZnBr 4 ] could dissociate and produce the true catalytically active species, [Bu 4 P][ZnBr 3 ] and Bu 4 PBr. Meanwhile, a possible ring-opening mechanism was proposed, in which the synergetic effect of cations and anions in the catalytic system can promote ring-opening. The significance of this study is that it provides guidance for developing metal bromide-based DEILs for carbonate synthesis.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLUTION CHEMISTRY
·
2023
·Vol. 52
·期 9
·1033-1047
·
IF 1.2
Li Ke,Li Renjiang,Duan Xiuzhi,Deng Dongshun
Emission of NH 3 or CO 2 containing tail gases will aggravate environmental problems of global climate warming, fog, and haze. Developing efficient absorbent for them is highly desirable. In present work, new type V pyrazole (Py)/glycerol (Gly) DESs with Py/Gly molar ratios of 1:1 and 1:2 were prepared. Their densities and viscosities with temperature were measured. The solubilities of NH 3 or CO 2 in two DESs were determined, with the near atmospheric solubilities of NH 3 and CO 2 up to 8.7052 mol·kg −1 and 0.0395 mol·kg −1 for Py/Gly DESs (1:1), respectively. Henry’s constant and the dissolution Gibbs free energy, enthalpy, and entropy changes of gas dissolution were obtained by correlating the experimental data. What’s more, Py/Gly DESs (1:1) presents potential ability to preferentially separate NH 3 from the tail gas containing NH 3 and CO 2 due to its ideal selectivity of NH 3 /CO 2 as high as 189.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2023
·
IF 2.8
Hui Wei,Xu Xin-Yi,Wang Hai-Jun
The conversion of atmospheric carbon dioxide (CO 2 ) gas mixtures and epoxides to cyclic carbonates is an environmentally beneficial execution strategy, which is a useful platform chemical. However, this reaction is overly dependent on harsh reaction conditions including temperature and/or CO 2 pressure in the traditional conversion process. We report a series of facilely prepared functionalized ionic liquids (ILs) for the one-pot synthesis of styrene carbonate (SC) from pure/diluted CO 2 with styrene oxide (SO). Which achieved a yield up to 99% under atmospheric CO 2 conditions. In addition, with the assistance of a small amount of catalyst, the product yield remained at 99% under diluted CO 2 conditions. This result demonstrates that functionalized ILs could effectively catalyze the cycloaddition reaction of low-pressure CO 2 without any co-catalysts such as metals, organic solvents, and active additives. The density functional theory (DFT) calculations combined with experimental results revealed that the highest catalytic ability of Cat.2 was ascribed to the synergic catalysis between positive charge delocalized cations and Br − anions to efficiently activate the substrates. Furthermore, the best ILs catalyst can be reused five times without significant reduction in catalytic activity, which shows its great potential for chemical conversion of atmospheric CO 2 . Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子