JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Ning Qi,Hongchao Qi,Tianrong Xiong,Youzhou He,Qinghong Cai,Zhuoqi Liu,Panyin Wang,Yongcheng Feng,Lin Chen,Bowen Lei,Xingyan Liu
The interfacial agglomeration in photocatalysts synthesized via high-temperature methods leads to hindered charge carrier mobility, severely limiting their photocatalytic performance. Herein, we introduced a room-temperature sulfidation strategy for the fabrication of CdS/CuS heterojunctions utilizing Cu-BTC. The optimized CdS/CuS composite demonstrated an exceptional hydrogen evolution rate of 14.07 mmol·h −1 ·g −1 , which was 7.5 times greater than that of pristine CdS. The slow release of Cu 2+ from Cu-BTC at room temperature effectively inhibited interfacial agglomeration. This was further confirmed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Furthermore, the formation of a CdS/CuS type-II heterojunction was confirmed by Mott-Schottky measurements, Tauc analysis, and valence band X-ray photoelectron spectroscopy (VB-XPS) analysis. Owing to the interfacial electronic coupling of CdS/CuS, charge carrier recombination is suppressed while carrier migration and separation are accelerated, leading to a significant enhancement in the hydrogen evolution activity. This work therefore proposes a feasible room-temperature synthesis strategy for fabricating high-quality heterojunctions, which effectively suppresses interfacial agglomeration and accelerates charge carrier transfer, resulting in enhanced photocatalytic performance.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Peng Cui,Yixiao Zou,Jiajun Wang,Xixi Ren,Chen Zhang,Kang Liao,Jinfeng Zhang,Hualei Wang,Jianjun Tian,Jing Mao,Yutong He,Xiaolong Zhang,Xiaopeng Han,Wenbin Hu
Electrochemical reconstruction of electrocatalysts is critical to their practical performances. However, the relevant influencing factors for the evolution process are still rare, restricting the design of high-performance electrocatalysts. Herein, using acidic CO 2 electroreduction reaction (CRR) over Cu 2 O as a model system, we systemically studied how organic additives regulate the reconstruction of high-valent Cu species and the CRR mechanism. Theoretical calculations reveal the relationship between additive physicochemical properties and Cu 2 O. Notably, in situ characterization reveals that DMSO strongly interacts with the catalyst, partially reducing Cu 2 O to form a Co-lattice OD-Cu/Cu 2 O heterostructure with interfacial Cu atoms belong to both Cu 2 O and Cu lattices and exhibits an intermediate valence state. Based on the Co-lattice OD-Cu/Cu 2 O, the Faradaic efficiency (FE) of C 2 H 4 was up to 67.5% at −1.5 V vs. RHE in H 2 SO 4 & Li 2 SO 4 electrolyte with a low FE H2 of 16.8%. Moreover, the combination achieves a stability of over 100 h in membrane electrode assembly (MEA) electrolyzes. Simulations uncover that the DMSO-modified Co-lattice OD-Cu/Cu 2 O optimizes *CO adsorption, lowers C–C coupling barriers and promote the generation of C 2 H 4 . Meanwhile, DMSO spontaneously adsorbs on the catalyst surface and effectively inhibits HER. This work deepens the understanding of electrocatalyst reconstruction behavior and contributes to the development of efficient electrocatalytic systems.
✓ 已验证
DOI
高影响因子
FirePhysChem
·
2026
·
IF 5.1
Wei Liu,Wenqi Yang,Zhenye Ma
The molecular bridge-mediated discontinuous loading strategy preserves active aluminum. • 5 wt% composite drops AP decomposition peak by 116.9°C and boosts heat release by 75.8%. • Cu 2+ /Cu + redox, ligand exotherm, and hierarchical loading synergize AP kinetics. • Interface engineering balances catalytic activity and reactivity. The dense native Al 2 O 3 layer on the surface of aluminum powder hinders interfacial contact with the decomposition products of ammonium perchlorate (AP), thereby restricting the energy release efficiency of Al/AP systems. To address the issue that conventional MOF coating strategies often achieve catalytic loading at the expense of active aluminum content, this work proposes an organosilane molecular-bridge-mediated surface-loading strategy: An amino-terminated self-assembled functional layer is fabricated on aluminum powder with 3-aminopropyltriethoxysilane (APTES). Aluminum particles are discretely anchored onto energetic MOF crystal surfaces through hydrogen bonding between amino groups and Cu-ATRZ ligands, as well as weak coordination with unsaturated Cu sites, yielding surface-loaded Cu-ATRZ@Al/APTES composite particles. This strategy avoids excessive shielding of active aluminum by a continuous coating layer, preserving an active aluminum content of 86.2% while achieving intimate particle-scale contact between catalytic sites and the fuel phase. Catalytic tests on AP thermal decomposition demonstrate that with only 5 wt.% addition of the composite particles, the peak temperature of AP high-temperature decomposition dropped significantly from 436.0°C to 319.1°C, a decrease of 116.9°C, whilst the exothermic heat of the system increased from 550.7 J∙g −1 to 968.2 J∙g −1 . Non-isothermal kinetic analysis reveals that the apparent activation energy of the composite system decreases from 196.7 kJ·mol −1 for pure AP to 156.5 kJ·mol −1 , and the catalytic effect is markedly superior to that of a physically mixed system. Mechanistic analysis indicates that the catalytic enhancement of this composite architecture stems from a triple synergistic effect: (i) electron transfer pathways enabled by the reversible Cu 2+ /Cu + valence interconversion, (ii) localized thermal feedback from the exothermic decomposition of the energetic ligand framework, and (iii) a shortened mass-transport distance for oxidizing species diffusing toward the fuel phase resulting from the surface-loaded structure. This work provides an interfacial engineering concept for energetic MOF/metal fuel composite systems that balances catalytic activity with fuel reactivity. Download: Download high-res image (191KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Wantong Wang,Shun Liu,Wenda Wu,Yimei Zhang,Xiaoze Du
Cu-based methanol steam reforming (MSR) catalysts are generally facing the fatal problems of easy sintering at high temperatures and poor long-term stability. In this study, we synthesized a series of Cu-based MSR catalysts supported by pure UiO-66 MOF and GO + UiO-66 composite materials with varying GO oxidation degrees and mass fractions through conventional thermal solvent impregnation. Comprehensively analysis revealed that both the specific surface area and thermal conductivity of the Cu@GO + UiO-66 catalysts exhibited positive correlations with those of their corresponding support materials. The optimal-performing [email protected] wt%GO-0.3+UiO-66 catalyst demonstrated exceptional MSR catalyst performance, achieving 98.50 % methanol conversion at 300 °C with an inlet flow rate of 0.014 ml/min (4.18 h −1 ), while maintaining remarkably low CO selectivity (2.02 %) and high hydrogen productivity (6.82mmol/(min·g)). It also showed outstanding stability with only 10.38 % and 8.06 % decrease in methanol conversion and hydrogen productivity after continuous operation of 96 h. The excellent catalytic performance and stability were attributed to the significant and well-dispersed Cu loading (28.04 wt%), the high specific surface area of 128.83 m 2 /g (BET) and the enhanced thermal conductivity of 0.80W/(m·K) which were achieved through the use of the modified-0.01 wt%GO-0.3+UiO-66 support. Moreover, a minor amount of GO in the support was conducive to the formation of Cu + , and the abundant oxygen vacancies inside the catalyst could further stabilize the Cu + active sites, resulting in the formation of Cu–Zr-O x interfacial structures and the strong interaction between Cu species and the support, which effectively enhanced the catalytic performance and stability of the catalyst.
✓ 已验证
产品关联
DOI
高影响因子
Energetic Materials Frontiers
·
2025
·
IF 3.9
Xing-yang Cui,Jin-chao Ma,Shu-yue Xu,Ji-zhou Dong,Feng-li Bei,Chuan Xiao,Hua Qian
There is a growing interest in the development of metal-doped carbon nitrides due to their extensive applications in photocatalysis, organocatalysis, electrocatalysis, nanozymes, and biosensing technologies. Here a series of transition metal-doped carbon nitride nanocomposite has been developed utilizing a rapid combustion synthesis method. Comprehensive characterization of the samples was conducted utilizing techniques such as X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy-energy dispersion X-ray spectrometry, transmission electron microscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller specific surface area measurement analysis. The catalytic effects of the composites were evaluated through TG and DSC analyses. Among the composite materials studied, PCN-0.50Cu with the unique bivalent state structure of copper (Cu(0) and CuO(II)) demonstrated the highest catalytic activity, resulting in a reduction of the peak decomposition temperature of ammonium perchlorate (AP) by 101.5°C, a decrease in the duration of thermal decomposition by 54.7%, and a reduction in activation energy by 141.5 kJ·mol -1 . Moreover, the incorporation of PCN-1.00Cu at a concentration of 2 wt.% resulted in a 45.47% enhancement in the combustion rate of HTPB-based solid propellant. The combustion synthesis of transition metal-doped carbon nitride nanocomposites constitutes an effective approach for the development of solid propellants catalysts and advances the potential applications of nanocomposites in high-energy solid propellant technologies.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2025
·
IF 14.3
Junjie Xu,Wei Sun,Xiang Xiong,Yi Zeng,Qingbo Wen
Conventional ultra-high-temperature ceramic-modified carbon/carbon composites (C/C-UHTCs) face limitations such as excessive erosion in the gas environment of solid rocket motors (SRMs). In contrast, metal-reinforced C/C-UHTCs exhibit enhanced mechanical properties, thermophysical characteristics, and resistance to high-temperature erosion. These advantages indicate significant potential for metal-reinforced C/C-UHTCs to augment the thrust capabilities of SRMs. This study demonstrated the preparation of (Hf, Zr, Ti)C-(Hf, Zr, Ti)B 2 -W-Cu cermet modified C/C composites using slurry infiltration and reactive melt infiltration at 1400°C. The microstructure, formation mechanisms, mechanical properties, and thermophysical properties of C/C-(Hf, Zr, Ti)C-(Hf, Zr, Ti)B 2 -W-Cu composite materials, as well as the ablation behavior of the composite materials under the SRM environment were compared. The results showed that the linear and mass ablation rates of the C/C-(Hf, Zr, Ti)C-(Hf, Zr, Ti)B 2 -W-Cu composite material decreased by 112.1% and 160.4% (0.074 mm s −1 , 0.086 g s −1 ), respectively, compared with those of the C/C-(Hf, Zr, Ti)C composite material. This could be attributed to the formation of a dense, high-strength W-skeleton composite (Hf, Zr, Ti)O 2 oxide layer during the ablation of the C/C-(Hf, Zr, Ti)C-(Hf, Zr, Ti)B 2 -W-Cu composite, which effectively resisted erosion from high-temperature, high-speed and high-particle-concentration two-phase gas flow. This work presents a novel approach to enhancing the ablation resistance of C/C-UHTCs and holds significant promise for the development of structural materials in SRM environments.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2013
·
IF 2.39
Fangwei Zhan,Hui Zhang,Yue Qi,Jiazheng Wang,Ning Du,Deren Yang
In this article, we report a two-step electrodeposition method for the synthesis of Cu/SnCo core–shell rod-shaped arrays as anodes of lithium-ion batteries. Firstly, the arrayed Cu nanorods with diameters of 200 nm were fabricated on a Cu foil through an electrodeposition method with alumina oxide membrane (AAO) as the template. Secondly, the SnCo alloy shells were subsequently electrodeposited on the surface of the rod-shaped Cu arrays to form the hybrid nanostructures . These hybrid electrodes delivered the enhanced cyclic performance and high rate capability serving as the anode materials for lithium-ion batteries. The improved electrochemical performance might be attributed to the large surface-to-volume area, sufficient buffering space, and high electronic conductivity associated with these 3-dimensional (3D) nanostructures.
✓ 已验证
DOI
高影响因子
Journal of CO2 Utilization
·
2018
·
IF 5.503
Xue-Dong Li,Yu Cao,Ran Ma,Liang-Nian He
Efficient CuI/1,10-phen-catalyzed three-component cascade reaction of propargylic alcohols, CO 2 , and 2-aminoethanols has been firstly developed for the thermodynamically favourable preparation of 2-oxazolidinones. In the presence of commercially available CuI, 1,10-phen (1,10-phenanthroline) and t -BuOK, the cascade reaction afforded the desired products in good to excellent yields with a broad substrate scope (14 examples). The predicted copper complex Cu 2 I 2 (phen) 2 in situ formed from CuI and 1,10-phen could activate the triple bond through coordination. The isolation of α-alkylidene cyclic carbonate as the reaction intermediate suggests that the carboxylative cyclization of propargylic alcohol with CO 2 , followed by ring-opening reaction, is involved in the one-pot three-component cascade reaction.
研究领域:
有机化学
·
催化
·
二氧化碳利用
·
合成方法学
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6
Chen Yang,Limin Zhang,Zijun Ma,Junhao Gao,Yang Zhou,Bing Li,Jianbo He,Fang Li
Background The detection and quantification of glucose in human biofluids are critical for the early diagnosis and management of metabolic disorders such as hypoglycemia and diabetes. Non-invasive wearable sensors for sweat glucose monitoring have emerged as promising alternatives to traditional blood glucose testing due to their ease of use, rapid response, and portability. However, the development of stable, cost-effective, and enzyme-free wearable platforms capable of reliable sweat glucose detection remains a significant challenge. Current enzyme-based sensors often suffer from poor stability under ambient conditions, complex fabrication processes, and high costs, limiting their widespread applicability in resource-constrained settings. Results Au NPs/Cu-TCPP(Fe) nanozymes exhibiting dual peroxidase-like and glucose oxidase-like catalytic activities were synthesized and characterized. These nanozymes catalyze a cascade reaction: glucose oxidation generates H 2 O 2 , which is then decomposed to produce hydroxyl radicals that oxidize 3,3′,5,5′-tetramethylbenzidine (TMB), yielding a blue-colored product for colorimetric detection. A flexible, multi-layer hydrophilic-hydrophobic array patch was fabricated by integrating the nanozymes and TMB into a paper-based matrix. This design enables efficient in situ sweat collection, concentration, and colorimetric analysis. The patch exhibits a linear detection range of 20–200 μM with a detection limit of 12.72 μM, suitable for physiological sweat glucose levels. Selectivity tests confirmed negligible interference from common sweat components. A smartphone application was developed to enable real-time, quantitative analysis of colorimetric signals. Clinical validation on multiple volunteers across different skin locations (chest, back, forearm, forehead) showed strong correlation with reference methods (HPLC-MS, commercial glucose detection kit), with relative errors <10 %. Significance This study presents a low-cost and enzyme-free sweat glucose detection platform based on Au NPs/Cu-TCPP(Fe) nanozymes. The integration of smartphone technology enables point-of-care testing, making the platform particularly suitable for personalized health monitoring. The successful validation in human subjects demonstrates its potential for real-world applications in diabetes management and early disease detection. This work bridges the gap between nanozyme catalysis and wearable sensor technology, providing a versatile platform for non-invasive biomarker detection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Water Process Engineering
·
2026
·
IF 6.7
Xiao Liu,Runze He,Jiachen Song,Xinyu Hou,Fei Wang
With the growing severity of environmental pollution, the treatment of organic wastewater and waste plastic bottles has become global concerns. This study explored the feasibility of synthesizing metal-organic composite catalysts using waste PET plastic by a microwave one-step synthesis process with only 4 h. Comprehensive characterizations confirmed that the bimetallic Cu/Mn-PET catalyst outperformed monometallic counterparts and pure BDC-derived catalysts, featuring a more regular polyhedral morphology, good crystallinity and excellent stability. XPS valence state analysis uncovered pronounced synergistic interactions between Cu and Mn. Notably, despite a relatively low specific surface area (11.75 m 2 /g), Cu/Mn-PET featured the highest active site density and exhibited minimal interfacial charge transfer resistance in electrochemical measurements. When combined with PMS-AOPs technology, Cu/Mn-PET achieved nearly 100% degradation efficiency for various pollutants (dyes, antibiotics, phenolic compounds) under optimized conditions, accompanied by substantial mineralization (TOC removal rates above 56.36%). Additionally, the Cu/Mn-PET catalyst also showed strong recyclability with low metal leaching concentrations, as well as good salt tolerance. Furthermore, it was proved that the catalytic mechanism of Cu/Mn-PET involved the combined action of free radical reactions and non-free radical reactions, but the non-free radical based 1 O 2 played a dominant role. Thus, a green and efficient PET microwave one-step conversion technology has been developed to prepare a bimetallic organic composite catalyst with high catalytic activity and stability successfully, which hold significant implications for environmental protection and resource utilization.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Chemistry
·
2026
·
IF 15.6
Xingyang Wu,Yucui Xiang,Liyong Gan,Shuaijun Wang,Zhongkai Hao,Guo Qin Xu,John Hon Kay Yip
Selective solar-driven conversion of CO 2 into C 2 hydrocarbons under aqueous conditions is a promising route toward carbon neutrality. However, C 2 selectivity in water is severely constrained because the intrinsically slow C–C coupling requires sustained electron flux to build up coupling-relevant intermediates. This flux is readily depleted by the competing hydrogen evolution reaction and rapid carrier recombination. Here, we construct an in situ S-scheme heterojunction of CuO islands on two-dimensional (2D) N-TiO 2 (CuO/N-TiO 2 ) via a one-pot solvothermal strategy. The chemically anchored CuO islands on 2D N-TiO 2 nanosheets create a compact, coherent interface that facilitates interfacial charge transfer. Compared with an ex situ assembled counterpart, the in situ heterojunction shows more efficient S-scheme charge separation. In situ characterizations and theoretical calculations reveal that dynamically redox-cycling Cu 2+ /Cu + sites are beneficial for C 2 H 4 formation, with Cu + sites favoring *CO retention and Cu 2+ sites being more favorable for the subsequent asymmetric *CO–*CHO coupling step. Consequently, the as-prepared catalyst delivers 17.5 μmol g −1 ethylene in 4 h with 94.6% selectivity and robust cycling stability. This work establishes an in situ S-scheme heterojunction with oxide islands anchored on 2D nanosheets that integrates charge management with dynamic active sites for selective aqueous CO 2 -to-C 2 H 4 photoreduction. An in situ grown CuO-islands/2D N-TiO 2 S-scheme heterojunction promotes charge separation for aqueous CO 2 -to-C 2 H 4 photoreduction without sacrificial agents. The dynamic Cu 2+ /Cu + active sites favor *CO formation, asymmetric *CO–*CHO coupling, and ethylene selectivity. Download: Download high-res image (161KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·
IF 7.6
Rui Zhou,He Cui,Yi Zhao,Mingli Li,Kaifeng Li,Xiongwei Qu,Kai Ge,Chen Xu,Binyuan Liu,Yongfang Yang
Photocatalytic technology is regarded as one of the most green and economic measures to convert CO2 into valuable chemicals under the “dual-carbon” goal. Doping is an effective and facile modulation strategy to improve the photocatalytic efficiency of layered double hydroxides (LDH) photocatalysts. In this work, leveraging the strong Jahn–Teller effect of Cu (d9 configuration), lattice distortion, and oxygen vacancies in LDH were simultaneously constructed via a one-step solvothermal synthesis of Cu-doped LDH (CuCo-LDH). The catalytic performance of Cu1Co1-LDH with a CO yield of 126.34 μmol g–1 h–1 achieves an order of magnitude improvement (about 68.7×) over the original Co-LDH. DFT theoretical calculations revealed that the significantly improved catalytic performance of Cu1Co1-LDH primarily stems from the lattice distortion and oxygen vacancies owing to substitution of Cu for partial Co, which can cause the band gap of the doped LDH to be significantly reduced and the d-band center move toward the Fermi energy level, thus promoting carrier migration and separation, and enhancing the adsorption and activation of key intermediates in the CO2 photoreduction process, respectively. In addition, the significant increase in the specific surface area facilitates the exposure of active sites and promotes mass transfer of reactants during the photocatalytic process. This work systematically establishes the link between crystal configuration and photocatalytic activity, providing the solar energy industry with a facile strategy for preparing low-cost and highly efficiency catalysts.
✓ 已验证
DOI
高影响因子