文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4033至4044个,产品总数8,185个

切换升序
LIGHT
SENSORS AND ACTUATORS B-CHEMICAL · 2022 · IF 9.221

Supramolecular fluorescence nanoprobe loaded with azobenzene for the detection of azoreductase: Selective light-up of hypoxic cells

Ke Li,Shixin Zhou,Yabei Chen,Pan Xu,Bo Song

Hypoxia is a trait that widely exists in 90% of solid tumors. Under hypoxic conditions, biological reductase enzymes in tumors will be overexpressed (e.g., azoreductase). This feature is often used to design fluorescence probes to recognize hypoxic cells from normoxic cells. The presently reported fluorescence probes are mostly designed by covalent bonds , which requires tedious synthesis. In this study, a fluorescence nanoprobe was prepared by encapsulating azobenzene into assemblies of polymeric amphiphiles bearing fluorophores (denoted by PAF). The nanoprobes without azobenzene are strongly emitted in aqueous solution, and the emission was effectively quenched when azobenzene was included in the nanoprobes. The nanoprobes with azobenzene showed quite different emission intensities when cultured in hypoxic and normoxic cells, leading to fluorescence quantum yields (QYs) of 18.0% vs. 1.5%, respectively. Here, we demonstrated a facile method to prepare an azoreductase-responsive fluorescent nanoprobe that can selectively light up malignant cells from benign cells.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLID STATE CHEMISTRY · 2022 · IF 3.656

In situ strategy to construct Z-scheme poly(diphenylbutadiene)/TiO2 heterojunctions with enhanced visible light photocatalytic performance

Yisheng Hu,Xiaotian Zhang,Xinyan Zhang,Huimin Feng,Lei Xu

Z-scheme heterojunctions can improve the light energy utilization efficiency of TiO 2 -based semiconductors because of their unique photogenerated carrier transfer pathways. In this study, we used in-situ synthesis strategy to construct a novel π conjugated polymer poly (diphenylbutadiene) (PDPB) doped TiO 2 composite system . The as-synthesized 20 ​wt% PDPB/TiO 2 heterojunction shows a Rhodamine B degradation rate of 455.5 ​mg/h/g c under visible light, which is 272% higher than that of bare TiO 2 . The structural characterization and test analysis of the photocatalysts reveal the main reasons of the photocatalytic performance enhancement of PDPB/TiO 2 . The Z-scheme PDPB/TiO 2 heterojunctions possesses both the advantages of type II heterojunction and excellent redox ability of PDPB/TiO 2 system. Moreover, the introduction of PDPB enhances the visible light absorption range and the specific surface area of the catalyst. This work provides a fresh approach for the involvement of organic polymers in the construction of TiO 2 -based heterojunction photocatalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS & DESIGN · 2022 · IF 9.417

Customized reconstruction of alveolar cleft by high mechanically stable bioactive ceramic scaffolds fabricated by digital light processing

Xiaohong Yin,Qi Li,Yirong Hong,Xiaowen Yu,Xianyan Yang,Zhaonan Bao,Mengfei Yu,Huayong Yang,Zhongru Gou,Bin Zhang

Due to the personalized large defect and bone absorption of the alveolar cleft, its regeneration is still a great challenge. Conventional autologous bone repair leads to donor site adverse reactions and then bioactive materials with stable mechanical properties, suitable degradation rates, good osteogenic ability are required. In this study, the α-tricalcium phosphate (doping with and without 6% strontium; α-TCP-Sr6, α-TCP) bioceramic scaffolds with high-precision pore structure were developed to repair the alveolar cleft, and the physicochemical properties and bone repair performances were systematically compared with the pure β phase of tricalcium phosphate (β-TCP) bioceramic scaffolds.   It was shown that Sr dopant could adjust the bio-dissolution of α-TCP scaffolds, and contributed to excellent mechanical stability. As for the osteogenic capability in the alveolar cleft of rabbits, the α-phase TCP scaffolds both exhibited appreciable new bone ingrowth compared to the β-TCP scaffolds.   However, bone malformation and fibrous tissue invasion occurred in the control group (without filling scaffolds). This study suggests that the Sr dopant may adjust the biodegradation and mechanical stability of α-TCP, and such biodegradable Ca-phosphate bioceramics scaffolds prepared by digital light processing (DLP)-based 3D printing technique demonstrate significance in promoting the reconstruction of the alveolar cleft.

CAS / MDL: 7783-28-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2022 · IF 7.968

Zinc oxide-coated carboxyl-riched graphene oxide efficiently degrades microcystin-leucine arginine and antibiotics under visible light

Yongwu He,Songling Han,Gaomei Zhao,Jiaohua Luo,Changsheng Jia,Yin Chen,Qi Liu,Jining Gao,Cheng Wang,Junping Wang

Microcystin-leucine arginine (Mc-LR) and antibiotic residual in water bodies threaten human health and necessitate the development of efficient processing scheme. Photocatalytic composites are promising alternatives for eliminating these hazardous substances. Herein, we prepared a nanohybrid composed of zinc oxide (ZnO) and carboxyl-riched graphene oxide (cGO). The sustainable material termed [email protected] rapidly degraded Mc-LR ( k  = 0.68 min −1 , t 1/2 = 1.02 min, pH 7) under visible light. Mc-LR degradation products were nontoxic to human L0–2 cells. Animal experiments revealed that oral administration of Mc-LR impaired the hepatic function and caused mice death, which could be inspiringly relieved once the toxin was processed by [email protected] Furthermore, [email protected] efficiently degraded three quinolone antibiotics, ciprofloxacin ( k  = 2.30 min −1 , t 1/2 = 0.30 min), ofloxacin ( k  = 2.11 min −1 , t 1/2 = 0.33 min), and norfloxacin ( k  = 0.94 min −1 , t 1/2 = 0.74 min) at pH 7 under visible light. Owing to the antibiotic removal, [email protected] dramatically suppressed the development of drug resistance of sensitive bacteria. This study characterizes an easy-to-produce photocatalysed nanohybrid to eliminate Mc-LR and antibiotics in water that enriches the existing measures for water detoxication and benefits environmental improvement.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR STRUCTURE · 2022 · IF 3.841

Facile fabrication of BiOBrxCl1-x hierarchical microspheres photocatalysts for efficient degradation of diverse pollutants under visible light

Huixia Guo,Shan Wang,Liangliang Li,Yurong Zhang,Weiming Wang,Qinshuo Sun

The development of excellent photocatalysts is of great significance for the efficient photocatalytic degradation of persistent organic pollutants, but the low carrier separation efficiency and poor light absorption capacity usually restrict the performance of photocatalysts. Herein, we fabricated BiOCl, BiOBr and BiOBr x Cl 1-x nanosheets (NSs) photocatalysts by a simple one-step hydrothermal approach. BiOBr 0.7 Cl 0.3 nanoplates (NPs) and BiOBr 0.7 Cl 0.3 microspheres (MSs) composites were further synthesized by adjusting the precursor solvent via ethylene glycol-assisted hydrothermal method. Their structural properties were examined by comprehensive characterization techniques. XRD and UV-vis DRS results confirmed that the formation of BiOBr x Cl 1-x solid solution. PL and EIS tests were used to evaluate the carriers’ separation efficiency of the photocatalysts. The photocatalytic performance was evaluated through the degradation of tetracycline hydrochloride (TC-HCl) under visible light irradiation, and BiOBr 0.7 Cl 0.3 MSs exhibited superior photocatalytic activity, which could degrade 90.40% of TC-HCl under visible light illumination within 40 min. The quenching experiments identified that superoxide radical (•O 2 − ) predominated in the degradation of TC-HCl by BiOBr 0.7 Cl 0.3 MSs. And the degradation pathway and mechanism of TC-HCl by BiOBr 0.7 Cl 0.3 MSs were proposed. What's more, the BiOBr 0.7 Cl 0.3 MSs also exhibited considerable photocatalytic capability in the elimination of multiple fomites.

CAS / MDL: 106-51-4 64-75-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Energy Materials · 2022 · IF 6.959

Phosphorus–Oxygen-Codoped Graphitic Carbon Nitride for Enhanced Hydrogen Evolution and Photocatalytic Degradation under Visible Light Irradiation

Bingdi Wang,Chengkun Bai,Zhida Wang,Ping She,Hang Sun,Guolong Lu,Song Liang,Zhenning Liu

Phosphorus- and oxygen-codoped g-C3N4 (POCN) with enhanced photocatalytic performance has been fabricated through a facile one-step process, in which ammonium polyphosphate (APP) has been employed as a phosphorus precursor for the first time. The detailed thermal copolymerization process suggests that the presence of hydrogen bonds in melamine/APP complexes and gases generated from the APP molecules during the calcination results in the doping of phosphorus and oxygen atoms into the heterocycles of g-C3N4 and the formation of its nanosized structure. The introduction of APP changes the elementary content and morphology of the obtained POCN. POCN with 3.2% phosphorus and 11.3% oxygen (wt %) exhibits optimal photocatalytic performance and 8 times larger specific surface area than pristine g-C3N4. Compared with pristine g-C3N4, the H2 evolution rate and the apparent degradation rate of rhodamine B catalyzed by the obtained POCN increase by 2- and 5-fold under visible light, respectively. The enhancement of photocatalysis can be mainly attributed to the enlarged surface area, abundant active sites, reduced diffusion distance, and efficient charge separation. The corresponding charge transfer and degradation mechanisms are also proposed.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2022 · IF 6.371

Synthesis of rGO/g-C3N4 for methyl orange degradation in activating peroxydisulfate under simulated solar light irradiation

Yukun Li,Dan Zhang,Qishi Chen,Cong Chao,Junhong Sun,Shuying Dong,Yuyang Sun

In this study, reduced graphene oxide-based graphitic carbon nitride (rGO/g-C 3 N 4 ) composite was fabricated via thermal polymerization-hydrothermal method and were utilized to activate peroxydisulfate (PDS) under simulated solar light irradiation. The as-synthesized rGO/g-C 3 N 4 was demonstrated to effectively remove methyl orange (MO) in wastewater. Notably, 92.3% of MO (15 mg/L) was removed within 120 min in the presence of 0.2 g/L rGO/g-C 3 N 4 and 0.225 g/L PDS. The influence of activator dosage, PDS concentration and co-existing solution matrix on the removal efficiency was investigated. Free radical capture experiments confirmed that SO 4 ¯ · , photogenerated holes (h + ), O 2 ¯ · and non-radical reaction initiated by rGO played a major role in MO removal. Furthermore, PDS and rGO acted as the electron acceptor and transfer carrier of the photogenerated charges, respectively, resulting in the efficient activation of PDS. The promoting visible light absorption might be ascribed to the defect sites on the surface of rGO/g-C 3 N 4 , which generated from the rGO loading. This study revealed that the as-synthesized rGO/g-C 3 N 4 composite exhibits wide promising application prospects as a photocatalytic activator of PDS for the degradation of azo dyes in textile wastewater.

CAS / MDL: 7727-54-0 57-13-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nanomaterials · 2022 ·Vol. 12 ·期 2 ·204 · IF 5.719

Metal Nanoclusters/Polyvinyl Alcohol Composite Films as the Alternatives for Fabricating Remote-Type White Light-Emitting Diodes

Zhaoyu Liu,Dong Yao,Huiwen Liu,Hao Zhang

Packing luminescent metal nanoclusters (MNCs) into polymers and fabricating novel MNCs/polymer composite materials is effective in obtaining high-performance light-emitting diodes (LEDs). Herein, water soluble Cu and Au nanoclusters are encapsulated in polyvinyl alcohol (PVA) by a casting method. The obtained MNCs/PVA composite films are highly emissive with triple primary colors, and inherit the merits of PVA, such as transparency, flexibility, machinability, stability and self-healing ability. By employing the MNCs/PVA composite films as down-conversions, remote type monochromic and white LEDs are fabricated. The white LEDs (WLEDs) exhibit a maximum color rendering index (CRI) of 86 with a Commission Internationale de l’Eclairage (CIE) color coordinate of (0.33,0.35). By varying the three MNCs/PVA film arrangement, the correlated color temperature (CCT) of the WLEDs is tuned from 5582 to 9490 K, which signifies the possibility of MNCs/PVA as alternative light-emitting materials for advanced illumination and display in the future.Keywords:metal nanoclusters;fluorescence;polyvinyl alcohol;composite film;light-emitting diodes

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ADVANCED MATERIALS · 2022 ·Vol. 34 ·期 16 ·2200756 · IF 32.086

Fabrication of Flexible Mesoporous Black Nb2O5 Nanofiber Films for Visible-Light-Driven Photocatalytic CO2 Reduction into CH4

Xi Lin,Shuhui Xia,Liang Zhang,Yuanyuan Zhang,Songmei Sun,Yuehui Chen,Shuo Chen,Bin Ding,Jianyong Yu,Jianhua Yan

Achieving high selectivity and conversion efficiency simultaneously is a challenge for visible-light-driven photocatalytic CO 2 reduction into CH 4 . Here, a facile nanofiber synthesis method and a new defect control strategy at room-temperature are reported for the fabrication of flexible mesoporous black Nb 2 O 5 nanofiber catalysts that contain abundant oxygen-vacancies and unsaturated Nb dual-sites, which are efficient towards photocatalytic production of CH 4 . The oxygen-vacancy decreases the bandgap width of Nb 2 O 5 from 3.01–2.25 eV, which broadens the light-absorption range from ultraviolet to visible-light, and the dual sites in the mesopores can easily adsorb CO 2 , so that the intermediate product of CO* can be spontaneously changed into *CHO. The formation of a highly stable Nb  CHO* intermediate at the dual sites is proposed to be the key feature determining selectivity. The preliminary results show that without using sacrificial agents and photosensitizers, the nanofiber catalyst achieves 64.8% selectivity for CH 4 production with a high evolution rate of 19.5 µmol g −1 h −1 under visible-light. Furthermore, the flexible catalyst film can be directly used in devices, showing appealing and broadly commercial applications.

CAS / MDL: 1313-96-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2022 · IF 7.139

Facile synthesis of C–Ta4+ co-doped NaTaO3 and rGO nanocomposites with enhanced visible light photocatalytic performance

Yuehui Liu,Xiaobo Shi,Xuguang Liu,Xia Li

Nanocomposites of C–Ta 4+ co-doped NaTaO 3 and reduced graphene oxide (C-NTO/rGO) with highly efficient photocatalytic activity were fabricated by a one-step solvothermal reaction. The optimum composites C-NTO/3rGO (with 3 wt% rGO) exhibited superior photocatalytic activity for the degradation of RhB over a mono-component counterpart under visible light irradiation . The photocatalytic efficiency was found to be as high as 97% for 90 min. Both XRD and XPS characterizations indicated that the doping of carbon into the NaTaO 3 lattice leads to the reduction of Ta 5+ to Ta 4+ . Furthermore, the co-doping significantly narrows the band gap (about 2.8 eV). Photo-luminescence (PL), time resolved transient PL decay spectra and photo-current results confirmed that photo-induced hole-electron pairs can be effectively separated resulting from the introduction of rGO. The synergistic effect of a decreased band gap and highly effective separation of photo-generated electrons and holes may be responsible for the enhanced photocatalytic activity of the fabricated nanocomposites. Both h + and •OH active radicals were found to be the key factors for the photo-decomposition process of RhB over the nanocomposites, while •O 2 − was also involved to a smaller extent. A possible photo-degradation mechanism for C-NTO/rGO was proposed on the basis of the experiments results.

CAS / MDL: 81-88-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2022 · IF 24.319

Photoredox coupling of benzyl alcohol oxidation with CO2 reduction over CdS/TiO2 heterostructure under visible light irradiation

Ming-Yu Qi,Qiong Lin,Zi-Rong Tang,Yi-Jun Xu

Coupling CO 2 photoreduction with selective organic synthesis offers a promising modus operandi to enable simultaneous utilization of photogenerated electrons and holes to realize solar fuels production and chemicals synthesis. Herein, we report a bifunctional zero-dimensional cadmium sulfide quantum dots-two-dimensional titanium dioxide nanosheets (CdS/TNS) heterostructure for photoredox-catalyzed coupling of C–C bond synthesis via selective oxidation of benzyl alcohol with CO 2 photoreduction to CO under visible light. The compositing heterointerface is beneficial for the adsorption and activation of CO 2 , thereby promoting the photoreduction of CO 2 . Remarkably, the synergistic interaction between CdS and TNS tunes the selectivity of benzyl alcohol oxidation from carbonyl compound to the C–C coupled products. Mechanistic studies unveil that the generation of C–C coupled products processes via key radical •CH(OH)Ph intermediates. Theoretical simulations reveal that the weaker adsorption of •CH(OH)Ph radical over CdS/TNS than bare CdS contributes to the formation of highly selective C–C coupled products. The findings are expected to offer instructive guidance on rationally designing the dual-functional catalysts with efficient photoredox-catalyzed coupling reaction systems for integrating CO 2 reduction with selective organic transformations.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2022 ·Vol. 57 ·期 6 ·4265-4282 · IF 4.682

Construction of S-scheme heterojunction by doping Bi2WO6 into Bi2O3 for efficiently enhanced visible-light photocatalytic performance

Hu Wenna,Wu Fan,Liu Wei

The objective of this study was to construct the S-scheme Bi 2 WO 6 / α- Bi 2 O 3 heterojunctions with high enhanced visible-light photocatalytic performance. The composites loaded various Bi 2 WO 6 mass ratios were prepared by a ball grinding method. The characterization and reaction mechanism of photocatalysts were explored in detail. Remarkably, the results demonstrated that the Bi 2 WO 6 / α- Bi 2 O 3 presented an outstandingly superior performance for photodegradation of nitrobenzene. Among them, the 10%Bi 2 WO 6 / α- Bi 2 O 3 possessed the best photocatalytic property, and it could reach up to 95.7% in 50 min with the top rate constant of 0.06178 min −1 , which was 4.3 and 3.6 times that of bare Bi 2 O 3 and Bi 2 WO 6 , respectively. Simultaneously, the Bi 2 WO 6 / α- Bi 2 O 3 was well stable after five cycling experiments. The efficiently improved photocatalytic performance was primarily attributed to the formation of S-scheme structure between Bi 2 WO 6 and α- Bi 2 O 3 , which enhanced the conspicuous separating efficiency of photogenerated carriers. The present study not only offers a method to solve the unsatisfactory activity of Bi 2 O 3 , but also provides some insights into the design of other novel S-scheme composites with great potential application in clean energy and environmental remediation. Graphical abstract The efficiently improved photocatalytic performance was primarily attributed to the formation of S-scheme structure between Bi 2 WO 6 and α- Bi 2 O 3 , which enhanced the conspicuous separating efficiency of photogenerated carriers.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。