International Journal of Minerals Metallurgy and Materials
·
2022
·Vol. 30
·期 1
·54-62
·
IF 3.85
Xu Nuo,Yuan Zirui,Ma Zhihong,Guo Xinli,Zhu Yunfeng,Zou Yongjin,Zhang Yao
MgH 2 with a large hydrogen capacity is regarded as a promising hydrogen storage material. However, it still suffers from high thermal stability and sluggish kinetics. In this paper, highly dispersed nano-Ni has been successfully prepared by using the polyol reduction method with an average size of 2.14 nm, which significantly improves the de/rehydrogenation properties of MgH 2 . The MgH 2 —10wt% nano-Ni sample starts releasing H 2 at 497 K, and roughly 6.2wt% H 2 has been liberated at 583 K. The rehydrogenation kinetics of the sample are also greatly improved, and the adsorption capacity reaches 5.3wt% H 2 in 1000 s at 482 K and under 3 MPa hydrogen pressure. Moreover, the activation energies of de/rehydrogenation of the MgH 2 —10wt% nano-Ni sample are reduced to (88 ± 2) and (87 ± 1) kJ·mol −1 , respectively. In addition, the thermal stability of the MgH 2 —10wt% nano-Ni system is reduced by 5.5 kJ per mol H 2 from that of pristine MgH 2 . This finding indicates that nano-Ni significantly improves both the thermodynamic and kinetic performances of the de/rehydrogenation of MgH 2 , serving as a bi-functional additive of both reagent and catalyst.
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2021
·Vol. 51
·期 1
·331-338
·
IF 1.938
Yun Xiangyan,Zhou Jun,Jia Yetong,Liu Shan,Zhu Yaohui,Li Xiong,Xu Denghui
White-emitting SrSc 1- x LiTeO 6 : x Dy 3+ phosphors were conveniently synthesized by a conventional high-temperature solid-state synthesis process. The crystal structure, photoluminescence spectrum characteristics, fluorescence quenching phenomenon, fluorescence lifetime analysis and the thermal stability of SrSc 1- x LiTeO 6 : x Dy 3+ phosphors were comprehensively illustrated. The E gap of the SrScLiTeO 6 host was approximately 4.65 eV based on diffuse reflectance spectroscopy (DRS) analysis. Moreover, the SrSc 0.94 LiTeO 6 :0.06Dy 3+ phosphor exhibits two principal emission bands: the narrow-band emission at 481 nm ( 4 F 9/2 → 6 H 15/2 , magnetic dipole transition, blue light area) and 573 nm ( 4 F 9/2 → 6 H 13/2 , electric dipole transition, yellow light area) under the excitation of 366 nm ultraviolet light, respectively. The values of τ are determined to be 0.558, 0.380, 0.307 and 0.254 ms for SrSc 1- x LiTeO 6 : x Dy 3+ ( x = 0.005, 0.01, 0.04, 0.08) samples, respectively. The value of Δ E for SrSc 0.94 LiTeO 6 :0.06Dy 3+ phosphor is deduced to be 0.1969 eV, which indicates excellent thermal stability. In addition, the CIE coordinates are located in the white light-emitting area. The abovementioned results show that the SrSc 1- x LiTeO 6 : x Dy 3+ can serve as a phosphor with potential application value for outdoor illumination.
✓ 已验证
DOI
高影响因子
Nanoscale Research Letters
·
2020
·Vol. 15
·期 1
·1-9
·
IF 3.578
Zhang Xuzi,Shang Chaoqun,Wang Xin,Zhou Guofu
Co 9 S 8 is a potential anode material for its high sodium storage performance, easy accessibility, and thermostability. However, the volume expansion is a great hindrance to its development. Herein, a composite containing Co 9 S 8 nanofibers and hollow Co 9 S 8 nanospheres with N, S co-doped carbon layer (Co 9 S 8 @NSC) is successfully synthesized through a facile solvothermal process and a high-temperature carbonization. Ascribed to the carbon coating and the large specific surface area, severe volume stress can be effectively alleviated. In particular, with N and S heteroatoms introduced into the carbon layer, which is conducive to the Na + adsorption and diffusion on the carbon surface, Co 9 S 8 @NSC can perform more capacitive sodium storage mechanism. As a result, the electrode can exhibit a favorable reversible capacity of 226 mA h g −1 at 5 A g −1 and a favorable capacity retention of 83.1% at 1 A g −1 after 800 cycles. The unique design provides an innovative thought for enhancing the sodium storage performance.
✓ 已验证
DOI
高影响因子
Science China-Technological Sciences
·
2022
·Vol. 65
·期 10
·2369-2379
·
IF 3.903
Zhang WenJing,Li SenLin,Zhang YuRong,Wang XingHui,Liu JingDong,Zheng YuanHui
The practical applications of solid-state electrolytes in lithium-ion batteries (LIBs) are hindered by their low ionic conductivity and high interfacial resistance. Herein, an ethoxylated trimethylolpropane triacrylate based quasi-solid-state electrolyte (ETPTA-QSSE) with a three-dimensional (3D) network is prepared by a one-step in-situ photopolymerization method. The 3D network is designed to overcome the contradiction between the plasticizer-related ionic conductivity and the thickness-dependent mechanical property of quasi-solid-state electrolytes. The ETPTA-QSSE achieves superb room-temperature ionic conductivity up to 4.55×10 −3 S cm −1 , a high lithium ion transference number of 0.57, along with a wide electrochemical window of 5.3 V ( vs. Li + /Li), which outperforms most ever of the reported solid-state electrolytes. Owing to the robust network structure and the cathode-electrolyte integrated electrode design, Li metal symmetrical cells show reduced interface resistance and reinforced electrode/ electrolyte interface stability. When applying the ETPTA-QSSE in LiFePO 4 ∥Li cells, the quasi-solid-state cell demonstrates an enhanced initial discharge capacity (155.5 mAh g −1 at 0.2 C) accompanied by a high average Coulombic efficiency of greater than 99.3%, offering capacity retention of 92% after 200 cycles. Accordingly, this work sheds light on the strategy of enhancing ionic conductivity and reducing interfacial resistance of quasi-solid-state electrolytes, which is promising for high-voltage LIBs.
✓ 已验证
DOI
高影响因子
Reaction Kinetics Mechanisms and Catalysis
·
2019
·Vol. 128
·期 2
·681-693
·
IF 1.428
Xie Chong,Yang Shenghui,Shi Jian-Wen,Niu Chunming
A novel MnO x –TiO 2 catalyst with hollow silkworm structure was synthesized successfully via an ethanol-thermal strategy by using activated carbon fiber felt as template for the first time. The silkworm-like MnO x –TiO 2 catalyst (MnTi) exhibited higher NO x conversion in the whole experimental temperature region (90–330 °C) under a high space velocity of 36,000 h −1 in comparison with the common MnO x –TiO 2 catalyst without hollow silkworm structure (MnTi-B). The excellent catalytic performance of MnTi can be attributed to its high specific surface area, large content of active surface oxygen species (O S ), and more surface acid sites. In addition, the MnTi catalyst also exhibited excellent resistance to water or SO 2 poisoning.
✓ 已验证
DOI
高影响因子
BMC Veterinary Research
·
2021
·Vol. 17
·期 1
·1-13
·
IF 2.741
Liu Xuesong,Yang Qingwen,Fan Yuying,Du Yuanyi,Lei Lei,Wang Dong,Liu Yun
Background Enrofloxacin is an antibacterial drug with broad-spectrum activity that is widely indicated for veterinary use. We aim to develop the clinical applications of Enrofloxacin against colibacillosis by using the neutropenic mice thigh infection model. Results The minimum inhibitory concentration (MIC) distribution of 67 isolated E. coli strains to ENR was calculated using CLSI guidelines. Whereas, the MIC 50 value calculation was considered as the population PD parameter for ENR against E. coli strains. The MIC values of 15 E. coli strains were found to be nearest to the MIC 50 i.e. , 0.25 μg/mL. Of all the tested strains, the PK-PD and E. coli disease model was established via selected E. coli strain i.e. , Heilong 15. We analyzed the PK characteristics of ENR and its metabolite ciprofloxacin (CIP) following a single subcutaneous (s.c.) injection of ENR (1.25, 2.5, 5, 10 mg/kg). The concentration-time profiling of ENR within the plasma specimens was determined by considering the non-compartmental analysis (NCA). The basic PK parameters of ENR for the peak drug concentration (C max ) and the area under the concentration-time curve (AUC) values were found to be in the range of 0.27–1.97 μg/mL and 0.62–3.14 μg.h/mL, respectively. Multiple s.c. injection over 24 h (1.25, 2.5, 5, 10 mg/kg at various time points i.e. , 6, 8, 12, and 24 h respectively) were administered to assess the targeted PD values. The Akaike Information Criterion (AIC) was used to choose PD models, and the model with the lowest AIC was chosen. The inhibitory E max model was employed to calculate the related PK-PD parameters. The results of our study indicated that there was a strong correlation between the AUC/MIC and various antibacterial activities (R 2 = 0.9928). The target values of dividing AUC/MIC by 24 h for bacteriostatic action were 1-log10 reduction, 2-log10 reduction, and 3-log10 reduction 0.325, 0.4375, 0.63, and 0.95 accordingly. Conclusion The identified pharmacodynamics targets for various antibacterial effects will be crucial in enhancing ENR clinical applications and serving as a key step in reducing bacterial resistance.
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2021
·Vol. 28
·期 47
·67203-67213
·
IF 4.223
Xu Xia,Zhang Ling,Xue Yingang,Gao Yu,Wang Liping,Peng Mingguo,Jiang Shanqing,Zhang Qiuya
Much more attention has been poured into microplastic pollution in freshwater systems recently. In the present study, the pollution of microplastics (MPs) in surface water and freshwater fish (crucian carp, etc.) were investigated from Gehu Lake, which is the second largest lake in southern Jiangsu after Taihu Lake. The result manifested that the average abundance of MPs was respectively 6.33±2.67 n/L for surface water and 10.7 items per individual for freshwater fish. The distribution of MPs in Gehu Lake varied from place to place, with the highest abundance of MPs was observed in the two estuaries of the eastern part of the lake. It was speculated that topographical factors and human factors were the main factors affecting the abundance and distribution of MPs. Transparent fibers were the main type of MPs in water samples, accounting for 69.70% of all detected particles. Meanwhile, most of the MPs ingested by freshwater fish were fibers, and the main colors were transparent and blue. In addition, the dominant size of the MPs was between 0.1 to 0.5 mm in water and fish samples. Moreover, PES, man-made fiber, and PP were the dominant polymer types in the surface water and fish samples. The results of this investigation can provide basic data for the research and management of MPs in freshwater systems.
✓ 已验证
DOI
高影响因子
Journal of Inorganic and Organometallic Polymers and Materials
·
2019
·Vol. 30
·期 3
·976-985
·
IF 1.637
Zou Jiaming,Liao Kaifa,Xiang Li,Liu Mouwu,Xie Fan,Liu Xinlin,Yu Jianglai,An Xiaonan,Wang Yanfei
Poly (cyclotriphosphazene-co-4,4′-diaminodiphenyl sulfone) (PZD) microspheres were prepared by precipitation polymerization with simple scheme and convenient operation, and used as a special effect adsorbent for adsorbing cationic dye, which is methylene blue (MB) in water. The synthesized PZD microspheres were characterized by SEM, TEM and XPS techniques. The influences of temperature, adsorption time, pH initial MB solution concentration and adsorbent dosage on MB adsorption were studied. The experimental results show that the adsorption of MB dye by PZD microspheres is more in line with the pseudo-second-order kinetics model than the pseudo-first-order kinetic model. In addition, the adsorption process was further resolved using Weber’s intraparticle diffusion model. Thermodynamic experiments show that the adsorption process is spontaneously carried out by endotherm. The mechanism of adsorption of MB dye by PZD microspheres may be related to the existence of a lot of electron-rich atoms N, P, S in the adsorbent, the electrostatic attraction and π–π stacking effect between PZD microspheres and MB dye.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2021
·Vol. 152
·期 7
·1950-1960
·
IF 3.186
Wang Qing,Shi Shaojie,Wu Fan,Zhang Zhiguo,Li Guoneng,Zheng Youqu,Suo Yange
Abstract In this work, highly active CoZn nanocrystals embedded in N-doped graphene layers (CoZn@NG-nPVP) towards oxygen reduction reaction (ORR) were synthesized through pyrolysis of bimetallic zinc cobalt Prussian blue analogues (i.e., Zn 3 [Co(CN) 6 ] 2 -nPVP), which consists of coordination band between zinc and [Co(CN) 6 ] 3− , with PVP as a structure regulator. The obtained CoZn@NG-nPVP samples display three-dimensional porous microsphere structures. Compared with CoZn@NG samples derived from Zn 3 [Co(CN) 6 ] 2 without PVP, the CoZn@NG-nPVP samples derived from Zn 3 [Co(CN) 6 ] 2 -nPVP with PVP exhibit more carbon defects, larger BET specific surface area, and higher contents of pyridinic-N and graphitic-N, leading to the high activity of the catalyst. The onset potential of CoZn@NG-4PVP-900 catalyst towards ORR is 0.98 V (vs. RHE) and the half-wave potential is 0.87 V (vs. RHE), which are comparable with that of commercial Pt/C. In addition, the electrochemical stability of CoZn@NG-4PVP-900 is much higher than that of commercial Pt/C. Graphic Abstract
✓ 已验证
DOI
高影响因子
IONICS
·
2021
·Vol. 27
·期 9
·3761-3768
·
IF 2.817
Li Wei,Ai Huiting,Liu Zheng,Wei Chuchu,Han Guo-Cheng,Zhan Ling
In order to improve the electrochemical properties of Na 2 MnPO 4 F (NMPF), low-cost biomass cane bagasse was used as a carbon source for coating, Na 3 V 2 (PO 4 ) 2 F 3 (NVPF) was used as a doped phase to prepare different ratios of xNa 3 V 2 (PO 4 ) 2 F 3 ·(1-x)Na 2 MnPO 4 F@C (NVPF/NMPF@C) composite materials via a sol–gel method. The results including analysis of XRD, SEM, EDS, and XPS methods showed that NVPF/NMPF@C (x = 0.2) composite material had good crystallinity, and NVPF can be uniformly doped in NMPF@C. The rate performance of NVPF/NMPF@C composite was tested at 0.1, 0.2, 0.5, 1, and 2 C. The first discharge specific capacity of NVPF/NMPF@C composite electrode material reached 193 mAh/g and increased by approximately 20 times when compared to only 9 mAh/g of NMPF@C. The coulombic efficiency of NVPF/NMPF@C material remained 95% after 35 cycles at 0.1 C. The introduction of NVPF can improve charge transfer and Li + diffusion, and enhance the electrochemical behavior of the lithium-ion battery cathodes.
✓ 已验证
DOI
高影响因子
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
·
2019
·Vol. 93
·期 2
·291-301
·
IF 1.986
Ji Lijun,Qin Xiang,Zheng Jingjing,Zhou Shu,Xu Tong,Shi Guojun
Ag–Carbon–TiO 2 composite tubes were prepared by using polystyrene/AgNO 3 composite fibers as a sacrifice template and a co-pyrolysis process. The Ag–Carbon–TiO 2 tubes were characterized by SEM, TEM, X-ray diffraction, Raman spectrum, XPS, and UV–vis spectrum. The results showed that the Ag–Carbon–TiO 2 tubes possessed uniform tubular structure with amorphous carbon, graphitic carbon, and Ag nanoparticles (AgNPs) distributing uniformly in TiO 2 . The Ag–Carbon–TiO 2 tubes were confirmed high UV–vis light utilization and photocatalytic degradation efficiency to Rhodamine B due to the carbon doping, the surface plasmon resonance of AgNPs and the tubular structure, and the degradation of Rhodamine B reached 90% in 6 h. Meanwhile, they showed an excellent antibacterial effect on staphylococcus aureus, and the fatality rate of Ag–Carbon–TiO 2 tubes to staphylococcus aureus reached 99.9% in 24 h when its concentration was higher than 4 mg/ml. The co-pyrolysis process could repress the AgNPs to grow to be large particles, which could be a key for the excellent antibacterial property. The research showed a promising strategy for preparing Ag–Carbon–TiO 2 composite tubes by co-pyrolysis of PS composite electrospinning fibers, indicating their potential application in wastewater treatment and antibacterial materials.
✓ 已验证
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2019
·Vol. 35
·期 2
·299-303
·
IF 1.071
Zang Dongyun,Zhao Guanjia,Liu Xiaona,Yin Jianguo,Ma Suxia
Densities of methyl nonanoate, n -dodecane, and their binary mixtures were investigated to provide the necessary data for their engineering applications as promising fuels and fuel additives. In the present work, densities were measured under atmospheric pressure at 293.15―463.15 K. The density data for the binary mixtures were fitted into a form of excess molar volume. The excess molar volumes were mostly positive, and the maximum value was obtained at molar fractions of n -dodecane between 0.5 and 0.6. Molecular simulations of specified systems were carried out by using four kinds of force fields, and the suitable force fields for describing the volume properties of the system were AMBER96 and OPLS-AA. The relative deviations for these two force fields between the simulated and the experimental data were well within ±4%, which meets the general engineering requirement.
✓ 已验证
DOI
高影响因子