Polymers
·
2024
·Vol. 16
·期 12
·1658
·
IF 4.7
Peng Xu,Jun Yu,Lingzhi Xie
Gel plugging agents have become one of the preferred methods for plugging in complex and severe loss conditions during drilling due to their good adaptability to loss channels. To address the common issue of poor temperature resistance in gel-based plugging agents, high-temperature-resistant gel plugging materials were synthesized through the molecular design of polymers, modifying existing agents. Based on the temperature and salt resistance of the aqueous solution of an acrylamide (AM)/N-vinylpyrrolidone (NVP) binary copolymer, temperature-resistant monomer sodium styrene sulfonate (SSS) was introduced and reacted in a polyvinyl alcohol (PVA) aqueous solution. Using ammonium persulfate (APS) as an initiator and crosslinking with N,N-methylenebisacrylamide (MBA), a gel plugging material resistant to 140 °C was synthesized. The structure, thermal stability, water absorption and expansion, and plugging performance of the gel were studied through hot rolling aging, thermogravimetric analysis, infrared spectroscopy, electron microscopy scanning, sand bed experiments, and drag reduction experiments. The results show that the gel material has good thermal stability and water absorption and expansion at 140 °C, and its temperature-resistant plugging performance is excellent, significantly slowing down the loss rate of drilling fluid. This provides a basis for the further development of gel materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2024
·
IF 5.4
Yining Dong,He Li,Xuanhao Mei,Ce Han,Xue Gong,Ping Song,Weilin Xu
Traditional Pt/C is the most classic electrocatalyst for the oxygen reduction reaction (ORR) in fuel cells, in which the ORR mechanism is generally understood based on Pt nanoparticles alone. Here, based on the revealed fact of the inevitable coexistence of Pt nanoparticles and single atoms on such Pt/C, via density functional theoretical calculation, the pathways for the ORR process have been revealed: besides the known pathways on isolated Pt nanoparticles and single atoms, the other two pathways with enhanced ORR performance occur on neighboring Pt nanoparticles and single atoms due to their unique synergetic effects with the enhanced four-electron pathway by decreasing the H2O2 yield. Inspired by such insights, the mass ratio between Pt nanoparticles and single atoms was optimized to maximize their synergetic effect, which yielded an optimal hybrid Pt/C with Pt 8.0 wt % (5 wt % Pt SAs with 3 wt % Pt NPs). This mixture exhibited remarkable ORR performance on the same level as Pt/C with Pt 20 wt %, achieving a huge enhancement in Pt utilization. Such work deepens the understanding of the catalytic ORR mechanism of traditional Pt/C and can guide the design of Pt- or other precious-metal-based nanocatalysts with a high performance/price ratio for all kinds of energy processes.
✓ 已验证
产品关联
DOI
高影响因子
RARE METALS
·
2024
·
IF 9.6
Hu Xiao-Jie,Sun Yu-Han,Liu Ling-Yue,Mao Dan-Jun,Zheng Shou-Rong
Monochloroacetic acid (MCAA) is identified as a highly carcinogenic disinfection by-product in chlorinated drinking water. In this study, a series of CeO 2 -supported Pd catalysts (Pd/MCeO 2 ) were synthesized through one-step calcination of Pd-loaded Ce-UiO-66-BDC (Ce-MOF), and the liquid-phase catalytic hydrodechlorination of MCAA was explored using these catalysts. For comparison, Pd/CeO 2 catalysts were additionally synthesized using the conventional impregnation method. The characterization results reveal that the catalysts exhibit strong metal–support interaction, leading to high Pd dispersion and Pd n + content. Additionally, the calcination temperature significantly influences catalytic performance, with the catalyst calcined at 500 °C (Pd/MCeO 2 -500) demonstrating the highest catalytic activity and achieving complete dechlorination of MCAA within 50 min. Furthermore, it is found that the catalytic MCAA hydrodechlorination using the catalysts adheres to the Langmuir–Hinshelwood model. Accordingly, low reaction pH is favorable for the catalytic hydrodechlorination of MCAA, enhancing MCAA adsorption on the catalyst surface due to the electrostatic interaction between MCAA and the catalyst surface. Theoretical results suggest that the presence of Pd n + efficiently facilitates MCAA adsorption and C–Cl cleavage, thus significantly enhancing the liquid-phase catalytic hydrodechlorination. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2025
·
IF 5.7
Yuan Zhang,Yongtao Tan,Fengwei Tuo,Haorui Liu,Ning Mi,Jiantie Xu
Vanadium nitride (VN) has attracted significant attention as a promising electrode material for supercapacitors mainly owing to its high theoretical specific capacitance and broad electrochemical stability window. However, poor cycling stability caused by dissolution in alkaline electrolyte largely restricts its practical applications. Herein, a series of heterojunction Fe 3 C/VN/C- x composites were synthesized via a one-step pyrolysis strategy for pyrolysis mixture of iron-vanadium precursor and melamine at 700 °C for 2 h. Among the series, the optimized Fe 3 C/VN/C-2 exhibits a high specific capacitance of 291.2 F g -1 at 0.5 A g -1 , which is 2.7 times higher than pristine VN with 108.3 F g -1 . Moreover, the Fe 3 C/VN/C-2 enables asymmetric supercapacitor device (Ni(OH) 2 ||Fe 3 C/VN/C-2) achieving a high energy density of 14.9 Wh kg -1 with high power density of 400.1 W kg -1 and a high power density of 3998.6 W kg -1 with an energy density of 6.2 Wh kg -1 , and retaining 92.7 % of its initial capacitance after 10,000 cycles (17.2 F g -1 ). The enhanced electrochemical performance of Fe 3 C/VN/C-2 is attributed to the synergistic effect of the heterojunction and carbon matrix, which suppress vanadium dissolution and accelerate charge transfer kinetics.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2025
·
IF 5.5
Xiaowei Ma,Lin Tan
Metal–organic frameworks (MOFs)-derived compounds exhibit tremendous potential for applications in the field of microwave absorption, attributed to their unique structural characteristics, high specific surface area, and tunable magnetic and dielectric properties. However, their practical application in the microwave absorption field is limited by poor impedance matching. To address this issue, we successfully synthesized a composite microwave-absorbing material, labeled as Fe/Fe2O3/C/N,SGPE, by introducing heteroatom (N and S) codoped graphene (labeled as N,S-GPE) into an Fe/Fe2O3/C MOF derivative and employing a solvothermal method followed by subsequent pyrolysis. The introduction of N and S codoped graphene introduces defects and disordered structures, thereby enhancing interface and dipolar polarization processes, which in turn improve the dielectric properties and optimize impedance matching. The experimental results demonstrate that when the addition amount of N,S-GPE is 0.15 g, the material exhibits a maximum reflection loss of -62.8 dB at 7.6 GHz with a thickness of 3.09 mm, capable of absorbing over 99.9999% of microwaves. Consequently, this composite stands out as a promising candidate for high-efficiency microwave absorbers.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2025
·
IF 4.8
Weimeng Cai,Haojie Du,Erju Wang,Yuting Qiang,Kunhong Hu,Jianhua Guo
The synthesis of value-added chemicals from renewable biomass is becoming increasingly important in the transition to a sustainable and low-carbon energy system. Herein, we demonstrate a solvent-polarity modulation strategy to engineer biomass-derived Cu-MOF using 2,5-furandicarboxylic acid (FDCA) as a renewable ligand, where tailored β/α ratios via Kamlet-Taft parameters balance nucleation-growth kinetics to optimize textural properties. Pyrolyzed Cu-MOF at 500 °C under a nitrogen atmosphere yield the Cu/C catalysts, which were subsequently employed in the selective hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL). Among the various solvents used, the Cu-MOF precursor synthesized in a mixed solvent of methanol and N, N-dimethylformamide (DMF) demonstrated the highest catalytic performance, outperforming those synthesized in other solvents. This highlights the significant impact of solvent selection on the structure of Cu-MOF, which in turn affects their hydrogenation activity. Advanced characterization confirming that the uniform Cu dispersion (confirmed by HRTEM mapping) and Cu⁰/Cu⁺ electronic synergy (via Cu Auger analysis) enhanced hydrogenation performance. Additionally, the biomass-derived catalysts exhibited excellent durability. Overall, this research provides a promising approach to develop highly efficient catalysts using renewable ligands and demonstrates the potential of regulating catalyst properties through the strategic selection of solvents, as informed by Kamlet-Taft parameters.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Qingsong Jiang,Zhijie Chen,Muyan Bai,Shan Liu,Xiangyang Lou,Shimao Deng,Yangzi Shangguan,Xiaosong Gu,Qiang Zeng,Songhe Yang,Ying Liu,Hong Chen
Developing green and efficient techniques to convert plastic wastes into functional materials is attractive and remains highly challenging. This study employs a hydrothermal combining with pyrolysis process for constructing a Co 3 Fe 1 @C heterostructure from the polyethylene terephthalate (PET) waste-mediated metal-organic frameworks. The as-obtained Co 3 Fe 1 @C shows a core-shell structure and possesses good performance towards water electrolysis. The Co 3 Fe 1 @C can attain the current density of 100 mA cm −2 with an overpotential of 250 mV for oxygen evolution reaction (OER). In addition, the bifunctional Co 3 Fe 1 @C can realize the overall seawater electrolysis at 50 mA cm −2 with good stability for 280 h driven by a 2.2 V commercial silicon solar cell. Overall, this study demonstrates a green chemistry approach to simultaneous plastic waste upcycling and cost-effective electrocatalyst fabrication, which may stimulate further research on the “waste materialization” approach to converting solid waste into highly efficient catalysts for various chemistry and energy industry applications.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Decai Yang,Qing Ye,Chao Qu,Fanwei Meng,Lanyang Wang,Yongqi Li
Developing photocatalytic hydrogen evolution technology based on graphitic carbon nitride (g-C 3 N 4 , CN) has emerged as a potential solution for the future energy shortage in recent years. Herein, carbon (C) and fluorine (F) co-doping graphitic carbon nitride nanosheets (CFCN) were synthesized via a one-pot co-thermal method without introducing any metal element. Exceptional hydrogen production activity (3.87 mmol/h/g) was achieved by CFCN under visible light irradiation, which was 4.2-fold increase compared to the pristine CN. It could be attributed to the large specific surface area (51.59 m 2 /g) and efficient mass transfer facilitated by the porous sheet-like morphology of CFCN. Additionally, the modification of the band structure and internal charge redistribution were investigated via density functional theory (DFT) calculations, which confirmed there was a unidirectional and fast electron transfer channel from N through the C 4 delocalized large π bond to F. This creative research uncovered the pivotal role of F/C co-doping in enhancing photocatalytic hydrogen evolution efficacy, offering cutting-edge insights into the design of sustainable and eco-friendly photocatalysts based on metal-free CN.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Qi You,Fuhao Xu,Ya Zhong,Sheng Cui
The rapid progress in aerospace development has created severe thermal and electromagnetic environmental challenges. There is a significant increase in the need for thermal protective materials that combine thermal insulation and electromagnetic wave absorption (EWA) capabilities. Herein, we developed an innovative solvent-free ambient pressure aging (SFAPA) method combined with carbothermal reduction nitridation (CRN) to synthesize novel aluminium nitride/carbon aerogels (ACs). The hydrogen-bonding network enables the Al 2 O 3 nanorods to adhere robustly to the resorcinol/formaldehyde (RF) intermediate, ensuring efficient RF entrapment throughout the SFAPA process. The SFAPA method eliminates the need for aging and replacement processes, significantly reducing production costs. Investigating the reaction mechanism of ACs revealed that the carbon layer effectively prevents the formation of α-Al 2 O 3 , improving reaction efficiency. Concurrently, the carbon layers undergo a progressive process of structural ordering toward graphitization. The support provided by the nanorods results in a low shrinkage rate of 3.68 % for the ACs. The as-prepared ACs are lightweight (0.037 g/cm 3 ) and have low thermal conductivity (0.0332 W·m −1 ·K −1 ). Besides, the carbon layer effectively shields the AlN, enabling the ACs to exhibit good oxidation resistance even after a 10-min exposure to 1300 °C butane flame, while maintaining a low backside temperature of 132.6 °C. AlN/C10 exhibits outstanding microwave absorption performance, achieving a minimum reflection loss (RL min ) of −60.37 dB (17.33 GHz, 1.62 mm) and an effective absorption bandwidth (EAB) of 5.55 GHz (12.45–18 GHz, 1.87 mm). The successful fabrication of the ACs pioneers a way for the design and manufacture of AlN-based aerogels for thermal insulation and microwave absorption.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·Vol. 14
·期 1
·120487
·
IF 7.2
Jifang Zhang,Chengcheng Suo,Hongru Zhang,Wei Li,Sha Luo,Bing Tian,Chunhui Ma,Shouxin Liu
Constructing an efficient and low-cost electrocatalyst was highly necessary in electrocatalytic lignin depolymerization study. We prepared a unique 1D/2D/1D nanoflower electrocatalyst (Ti 20 @ZIS-Sv@C 0.5 (Ⅱ)) composed of TiO 2 , ZnIn 2 S 4 and C nanosheets by electrostatic self-assembly through solvothermal method. The TiO 2 was located as the core of catalyst and covered by the C deposited ZnIn 2 S 4 nanosheets. The electrochemical impedance (R ct , 248.5 Ω; R L , 6.511 Ω), C dl (1.75817 mF cm −2 ), Tafel efficiency (6.28 mV dec −1 ) and photocurrent intensity (5.23 μA) of Ti 20 @ZIS-Sv@C 0.5 (Ⅱ) exhibited higher electrocatalytic activity than that of original ZnIn 2 S 4 . Under optimized conditions, electrocatalytic process achieved 100 % C α -C β (β-O-4) and C Ar -O (α-O-4) cleavage efficiency and 244.37 mg g −1 benzaldehyde yield. We have further indicated C α -C β (β-O-4) and C Ar -O (α-O-4) cleavage mechanism by Cl-induced radical oxidation pathway. The electrocatalytic depolymerization of G-type lignin could obtained at least 14 molecular products (including 18.21 mg g −1 2-hydroxy-1-phenylethan-one, 11.39 mg g −1 pyrocatechol and 1.25 mg g −1 benzaldehyde). Mechanism investigation suggested the generation of chlorine radical (•Cl), followed by C-H activation and synergistic effect of Ti 20 @ZIS-Sv@C 0.5 (Ⅱ), leading to highly efficient lignin linkages cleavage. This work has developed an efficient electrocatalyst for lignin valorisation to produce aromatics via an electrocatalytic radical pathway.
✓ 已验证
DOI
高影响因子
PESTICIDE BIOCHEMISTRY AND PHYSIOLOGY
·
2025
·
IF 4
Shu-Lin Li,Fu-Peng Li,Zi-Xuan Yang,Yu-Jie Zhao,Zhao-Qun Li,Nai-Yong Liu
The cerambycid beetles are important components in the terrestrial ecosystem as they play a dual role in both degrading dying trees and killing healthy plants. The factors including human activity, habitat contraction, climate changes and pesticide use have been shaping the adaptation of beetles to host plants and the environment. As suggested in research on the functions of beetles' olfactory proteins, odorant binding proteins (OBPs) have been found to be involved in insecticide resistance other than chemoreception. Here, we assessed the importance of antenna/leg-enriched PantOBPs from Pharsalia antennata in the adaptation of hosts and habitats. Transcriptome analyses led to the yields of 60 OBP-coding genes in P. antennata , with the largest set of 44 Minus-C OBPs. Using RNA sequencing and PCR approaches, we obtained tissue-enriched and sex-biased PantOBPs. Binding studies revealed that 10 PantOBPs had diverse binding properties against 92 plant-derived odorants and 32 contact insecticides. Three plant volatiles of β-ionone, ethyl-(2 E ,4 Z )-deca-2,4-dienoate and syringaldehyde as well as seven insecticides including chlorpyrifos, phoxim and rotenone were strong ligands for most PantOBPs (dissociation constant, K i < 11.70 μM). Docking simulations and point-mutation experiments demonstrated the importance of C-terminal residues in the interactions of PantOBP12, OBP38 and OBP39 with good ligands, but, in some cases, they exhibited different binding mechanisms. Our results indicate that PantOBPs in P. antennata serve a dual function in chemoreception and insecticide binding, providing insights into the strong adaptation of this beetle to host plants and the environment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nano Energy
·
2021
·
IF 17.881
Guijia Cui,Qingyu Dong,Zhuangzhou Wang,Xiao-Zhen Liao,Siqi Yuan,Meidan Jiang,Yanbin Shen,Hong Wang,Haiying Che,Yu-Shi He,Zi-Feng Ma
NASICON-type (Na super ionic conductor) Na 4 VMn(PO 4 ) 3 (NVMP) cathode material has attracted increasing attention due to its higher sodium de-/intercalation voltage, lower cost and greener resources compared with Na 3 V 2 (PO 4 ) 3 . However, the poor electronic conductivity limits the exploitation of its electrochemical performance. In this work, we achieved an ultrahigh rate capable and long cycle life NVMP/C-rGO composite using the simple and scalable spray-drying technique, in which low-fraction rGO nanosheets (2.14 wt%) highly dispersed and bridged the carbon shelled NVMP nanoparticles to form an effective electron conductive network. Benefiting from this favorable nano-architecture, the elaborately designed NVMP/C-rGO composite exhibited excellent performance as cathode in sodium ion batteries, delivering reversible capacities of 105.5 mA h g −1 at 1 C (1 C = 110 mA h g −1 ) and 102.6 mA h g −1 at 50 C with capacity retention of 90.6% (1 C) and 80.4% (50 C) over 500 cycles, respectively. This is the highest rate performance for Na 4 VMn(PO 4 ) 3 materials reported so far. This work provides a practicable tactic for fabricating advanced polyanion-type cathode materials which can be commercially scale up for sodium energy storage.
✓ 已验证
DOI
高影响因子