ADVANCED FUNCTIONAL MATERIALS
·
2021
·Vol. 31
·期 26
·2011003
·
IF 18.808
Boning Han,Shichen Yuan,Bo Cai,Jizhong Song,Wenqiang Liu,Fengjuan Zhang,Tao Fang,Changting Wei,Haibo Zeng
According to the thinner emitting layer and stronger electric field in perovskite light-emitting diodes (PeLEDs) than those in perovskite solar cells, the strong electric-field-driven ion-migration is a key issue for the operational stability of PeLEDs. Here, a methylene-bis-acrylamide cross-linking strategy is proposed to both passivate defects and suppress ion-migration with an emphasis on the suppressing mechanism via in situ investigations. As typical results, in addition to the enhanced external quantum efficiency (EQE, 16.8%), PeLEDs exhibit preferable operational stability with a half lifetime ( T 50 ) of 208 h under continuous operation with an initial luminance of 100 cd m −2 . Moreover, the EQE of cross-linked LEDs can maintain above 15% during 25 times scanning as the devices are measured every 4 days. To the authors’ knowledge, this is the highest stability published until now for high-efficiency PeLEDs with EQE over 15%. The in situ/ex situ mechanism investigation demonstrates that such cross-linking increases binding energy from 0.54 to 0.92 eV and activation energy from 0.21 to 0.5 eV. Hence, it suppresses ligands breaking away and ion migration, which prevents ions from moving inside and across crystals. The proposed cross-linking passivation strategy thus provides an effective methodology to fabricate stable perovskites-based photoelectric devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Congyu Wang,Zepeng Rao,Asad Mahmood,Xiao Wang,Yan Wang,Xiaofeng Xie,Jing Sun
In the process of photocatalytic oxidation (PCO), titanium dioxide (TiO 2 ) shows excellent capabilities. However, when TiO 2 is used to remove volatile organic compounds (VOCs), there are some drawbacks including weak adsorption of gaseous contaminants, insufficient utilization of sunlight, and rapid recombination of photogenerated carriers. Herein, a TiO 2 -based ternary heterogeneous photocatalyst, g-C 3 N 4 /Ag-TiO 2 , was successfully fabricated to photodegrade gaseous acetaldehyde (one of the representatives of oxygenated VOCs) under visible light. Among the various samples, the g-C 3 N 4 /50 wt% Ag-TiO 2 exhibited an excellent photocatalytic activity , which was 5.8 times of bare TiO 2 . The mineralization efficiency of acetaldehyde was also increased by 3.7 times compared to bare TiO 2 . The substantial improvement in the PCO performance of the ternary system can be associated with the good adsorption to acetaldehyde gas and light-harvesting capability, as well as improved charge separation process. The application of Langmuir-Hinshelwood kinetic model suggested that relative humidity played a significant role in the VOCs degradation. Also, the photodegradation of gaseous acetaldehyde primarily occurred on the catalysts surface. Based on several characterizations, i.e., UV–vis spectroscopy, photoluminescence spectrum, photocurrent spectroscopy and electron spin-resonance test, a suitable degradation mechanism is proposed. This study provides a novel ternary photocatalyst with improved photocatalytic performance and stability, which can be used for the low-concentration VOCs abatement in the indoor environment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Zhiliang Jin,Haiming Gong,Hongying Li
The morphology modification and the construction of heterojunction of the photocatalyst are considered as the main means to significantly improve the performance of photocatalytic hydrogen evolution. In this study, Mn 0.2 Cd 0.8 S nanorods are successfully assembled on the surface of Ni-MOF-74 with flake morphology. Specifically, the Ni-S bond is constructed between Ni-MOF-74 and Mn 0.2 Cd 0.8 S, which provides a unique transfer channel for photo-induced carriers. Meanwhile, the electrons in the conduction band of Mn 0.2 Cd 0.8 S can be injected into the conduction band of Ni-MOF-74 quickly due to the potential energy difference between the two. This shows that the recombination of photogenerated carriers in Mn 0.2 Cd 0.8 S can be greatly inhibited. Fluorescence spectroscopy and electrochemical characterization reveal that the composite catalyst has the longest carrier lifetime, the fastest charge transfer rate and the lowest overpotential compared with the Mn 0.2 Cd 0.8 S and Ni-MOF-74. The optimal hydrogen production rate of the composite can reach 7.104 mmol g −1 h −1 , which is 6.96 times that of Mn 0.2 Cd 0.8 S. This work provides a novel strategy for the modification of MnCdS-based photocatalysts by metal–organic framework materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Inorganic and Nano-Metal Chemistry
·
2021
·
IF 1.716
Liang Xian,Bi-Quan Su,Yin-Xia Feng,Bei Xi,Zhi-Ying Duan
The hydrolysis of K2[PtCl4] under visible light, the equilibrium, morphology, and size of Pt NPs combined with CDs, the valence states of Pt element and the bonding of Pt NPs with CDs, the influence of different kinds of cyclodextrin (α, β, γ-CDs), the acidity of the solution, and the visible light color on the catalytic ability of Pt NPs were all researched by typical approaches. All results prove visible light irradiation is effectively playing a key role in the reaction process to form Pt NPs in a very narrow size distribution. pH = 9, β-CDs, and purple visible light are the optimized reaction conditions. The Pt-CDs present a high rate constant of 0.88 min−1 in the catalytic reduction of 4-NP. This research is beneficial for expanding photochemical approaches from ultraviolet light to visible light, which is more of green chemistry, low cost, and facile.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Mingge Wu,Qianqian Li,Cheng Chen,Guijin Su,Maoyong Song,Bohua Sun,Jing Meng,Bin Shi
The high-efficiency photocatalytic debromination of hexabromocyclododecane (HBCD) as new POPs and discovery of involved mechanisms remain a challenge. Herein, challenging Pd-anchored hollow-rod-like-g-C 3 N 4 (Pd/HR-g-C 3 N 4 ) was constructed as visible-light-driven photocatalyst. Complete destruction of (±)-α, (±)-β and (±)-γ-HBCD with 92.6 % bromine-removal was achieved at 60 min in optimal system of anaerobic methanol-water (70:30) mixture with 0.5 % Pd/HR-g-C 3 N 4 , being superior to most studied HBCD catalytic systems. The higher photocatalytic reduction performance is contributed to enhanced photoexcited-carriers separation and more negative conduction band arising from distinctive 1D-cavity of HR-g-C 3 N 4 , and surface-atomically dispersed Pd. A never-reported degradation pathway in which hydrodebromination and addition ring-opening synergistically occur is proposed according to identified products of ten saturated chain alkanes, C 12 H 19 Br 5 and C 12 H 19 Br 7 . Ulteriorly, hydride-transfer resulted in rapid hydrodebromination of HBCD over Pd/HR-g-C 3 N 4 , where H chiefly derives from methanol instead of water although they synergistically promoted e − utilization. This provided a valuable sight into the cost-effective pollution-removal of HBCD.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2021
·
IF 5.165
Ruxin Liu,Wenjun Zhang,Wenjing Liu,Guojing Li
Lead-free perovskites have been widely studied due to their environmental friendliness and high stability. In this study, Bi3+-doped Cs2HfCl6 has been synthesized at room temperature. Different from the emission of the Cs2HfCl6 host (452 nm), Bi3+:Cs2HfCl6 can produce a bright blue emission at an excitation wavelength of 350 nm, which is derived from the 3P1 → 1S0 transition of Bi ions and accompanied by the properties of self-trapped excitons. Moreover, 7%Bi3+:Cs2HfCl6 shows excellent stability with the photoluminescence quantum yield reaching up to 69.08%. Meanwhile, a light-emitting diode that is close to pure white light has been fabricated by using 7%Bi3+:Cs2HfCl6, which has a high color rendering index of 92.5. These results show that Bi3+:Cs2HfCl6 would be a potential candidate in the field of inorganic luminescent materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2021
·Vol. 31
·期 18
·2009733
·
IF 18.808
Rangrang Fan,Caili Chen,Huan Hou,Di Chuan,Min Mu,Zhiyong Liu,Ruichao Liang,Gang Guo,Jianguo Xu
Photothermal therapy (PTT) combined with chemotherapy, a promising strategy for breast cancer treatment, has a high potential to control drug release, reduce multidrug resistance, and improve therapeutic efficacy. The challenge is how to realize tumor ablation in deeper tissue and NIR-controlled drug delivery. Herein, tumor acidity and near-infrared light (NIR) responsive folic acid (FA) functionalized polydopamine (DPA) nanoparticles (NPs) are developed for doxorubicin (DOX) and epigallocatechin-3-gallate (EGCG) dual delivery. With the assistance of NIR, the cellular uptake of DOX-EGCG/DPA-FA NPs is about three- to sixfold higher when compared with the free DOX group and the control group without NIR irradiation. Moreover, biodistribution study in vivo indicates that DPA-FA NPs can enhance tumoral accumulation, penetration, retention of drugs, and display a ≈ 4- and 19-fold higher intra-tumoral distribution than that of the DPA NPs and free drug groups at 24 h postinjection. Furthermore, 60% of breast cancer-bearing mice survive over 70 days in the DOX-EGCG/DPA-FA NPs group. Additionally, DOX-EGCG/DPA-FA NPs can effectively boost therapeutic efficacy by inducing significant suppression of tumor growth and angiogenesis, and enhancement of apoptosis and necrosis of breast cancer cells. Taken together, DOX-EGCG/DPA-FA NPs may have potential applications as a useful nanoscale vector for enhanced cancer therapy.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2020
·Vol. 11
·期 1
·78-86
·
IF 3.119
Jingxuan Zheng,Bo Zhang,Zhao Wang
g-C3N4/MoS2 composites were successfully prepared by an electron-assisted strategy in one step. Dielectric barrier discharge (DBD) plasma as an electron source, which has low bulk temperature and high electron energy, can etch and modify the surface of g-C3N4/MoS2. The abundant N and S vacancies were introduced in the composites by plasma. The dual defects promoted the recombination and formation of heterojunctions of the g-C3N4/MoS2 composite. It exhibited stronger light harvesting ability and higher charge separation efficiency than that of pure g-C3N4 and MoS2. Compared with the sample by traditional calcination method, the plasma-sample showed better performance for degrading rhodamine B (RhB) and methyl orange. RhB is completely degraded within 2 hours on g-C3N4/MoS2 by plasma. A mechanism for the photocatalytic degradation of organic pollutants via the composites was proposed. An electron-assisted strategy provides a green and effective platform to achieve catalysts with improved performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Lixiang Zhang,Luping Feng,Pan Li,Xi Chen,Chenchen Xu,Sheng Zhang,Anchao Zhang,Guofu Chen,Hua Wang
A near-infrared (NIR) light-driven photoelectrochemical (PEC) sensing platform was established for the quantitative assay of Hg 2+ using Ag@Ag 2 S nanocomposites. Ag 2 S quantum dots (QDs) with the bead-chain-like nanostructure were fabricated simply via one-step oil-bath route to be further deposited with metallic Ag through the photo-reduction method to yield Ag@Ag 2 S nanocomposites. It was found that Ag@Ag 2 S-based sensor could present more than twice larger PEC responses than the Ag 2 S-based one, due to the synergetic combination of metallic Ag with the surface plasmon resonance (SPR) effects and Ag 2 S QDs with the NIR-light-irradiated PEC properties. More importantly, the developed PEC sensor could display the photocurrent responses that are selectively inhibited in the presence of Hg 2+ by forming Ag-Hg amalgam to accelerate the recombination of photo-induced electron-hole pairs. Under NIR light, it can detect Hg 2+ in the concentrations linearly ranging from 0.0010 to 5.0 nM, with a limit of detection of about 0.50 pM. This work may guide a promising combination of Ag 2 S of NIR QDs with metallic Ag of SPR effects for designing various PEC sensing platforms for the complex environmental monitoring of different heavy-metal ions like Hg 2+ .
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2020
·
IF 12.35
Mo Zhang,Zheng Li,Xing Xin,Junhao Zhang,Yeqin Feng,Hongjin Lv
Selective production of value-added platform chemicals from renewable biomass feedstocks and their derivatives has attracted tremendous attention with high potential in addressing global problems of energy and sustainability. In this work, a lead-halide perovskite (MAPbBr3, MA = methylammonium) is utilized as a photocatalyst for selective oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) using atmospheric O2 upon visible-light irradiation. Under minimally optimized conditions, the photocatalytic conversion of HMF in acetonitrile solvent reaches 100% with a DFF selectivity of over 90%, achieving an overall furanic carbon yield of over 96%. A detailed catalytic mechanism was proposed based on various spectroscopic and experimental results, revealing that the atmospheric O2, photogenerated electrons (e–), holes (h+), •O2–, and 1O2 species together play crucial roles in the effective and selective photo-oxidation of HMF to DFF. In addition, our present photocatalytic system is also applicable for photo-oxidation of benzyl alcohol with approximately 100% conversion and benzaldehyde selectivity, providing insights for future exploration of the present catalytic system.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2020
·Vol. 27
·期 17
·10047-10060
·
IF 4.21
Wang Minglei,Zhang Maojiang,Gao Qianhong,Liu Yinjie,Zhang Mingxing,Shen Rongfang,Zhang Yumei,Hu Jiangtao,Wu Guozhong
Immobilization of photocatalysts on substrates is an important factor for water purification in practical applications. In this study, an efficient Ag@AgBr photocatalytic coating was attached onto the surface of cotton fabric via radiation-induced graft polymerization and subsequent chemical reactions, and the resultant product was denoted as Cot-Ag@AgBr. The graft chains acted not only as a source of bromine, but also as an intermediate layer to anchor the Ag@AgBr photocatalytic coating via strong electrostatic interactions. The immobilized Ag@AgBr photocatalytic coating exhibited outstanding photocatalytic properties for organic dye degradation under visible light irradiation. Furthermore, Cot-Ag@AgBr presented high stability and robust durability, which conferred its excellent visible-light-driven photocatalytic activity after five rounds of photodegradation. After 10 min of ultrasonication, the amount of Ag@AgBr precipitate that leached from the Cot-Ag@AgBr was < 2%. Therefore, the as-synthesized cotton fabric offered good insight into the functionalization of polymer substrates with photocatalysts and could be useful for advanced wastewater treatment under the cyclic operations.
✓ 已验证
产品关联
DOI
高影响因子
POWDER TECHNOLOGY
·
2020
·
IF 4.142
Xueliang Jiang,Zitong Peng,Yanrong Gao,Feng You,Chu Yao
Using melamine-formaldehyde as template, tetrabutyl titanate as titanium source, and ytterbium nitrate as ytterbium source, the Ag-loaded double-shell TiO 2 @Y 2 O 3 hollow microspheres with TiO 2 as inner layer and Y 2 O 3 as outer layer were prepared by sol-gel method and high-temperature calcinations reduction. The characterization of hollow microspheres shows that the Ag-loaded TiO 2 @Y 2 O 3 hollow microspheres show regular morphology, uniform size and distinct double-shell hollow structure. Ag exists as the zero-valent form in the double-shell hollows spheres mainly. The results of Uv-visible diffuse reflection analysis and photocatalytic testing under visible-light show that the forbidden band widths narrowed and the photocatalytic activities improved significantly after the load of Ag. Moreover, the location of loaded-Ag has great effect on the photocatalytic activity of TiO 2 @Y 2 O 3 hollow microspheres. Compared with Ag located on the surface of the hollow microspheres, Ag located between the two shells of the hollow microspheres improved their photocatalytic activity more effectively.
✓ 已验证
产品关联
DOI
高影响因子