CHINESE JOURNAL OF CATALYSIS
·
2023
·
IF 16.5
Ping Zhang,Hao Chen,Lin Chen,Ying Xiong,Ziqi Sun,Haoyu Yang,Yingke Fu,Yaping Zhang,Ting Liao,Fei Li
Atomically dispersed catalytic metal sites anchored on N-doped carbon support catalysts (M-N-C) show great prospects for CO 2 electroreduction. Here, single-layer NiZn layered double hydroxides (NiZn-LDHs) was used as a sacrificial assistant to fabricate single-Ni atom anchored on ultrathin porous carbon catalyst. NiZn-LDHs were exfoliated to single-layer by polyhydroxy compounds which took as the carbon resource in Ni-N-C, and single layer NiZn LDHs taking as the Ni resource could avoid the agglomeration of Ni atoms during calcining. The CO Faradaic efficiency (FE CO ) of the synthesized Ni-N-C catalyst exceeded 90% at −0.6 to −1.0 V and a FE CO of 95.2% with a current density of 24 mA cm −2 at −0.9 V. This work not only provides a new method for preparing M-N-C catalysts, but also offers an effective and controllable strategy for large-scale production of high-performance single-atom catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Journal of CO2 Utilization
·
2022
·
IF 8.321
Dalei Sun,Liang Peng,Kang Cheng,Yuying Zheng,San Ping Jiang
The four manganese oxides with different oxidation states (MnO, MnO 2 , Mn 2 O 3 , Mn 3 O 4 ) was synthesized using the hydrothermal method through adjusting process parameters and feedstock ratio, and their catalytic performances for the carbonylation of n-butylamine by CO 2 were also investigated. The results showed that the catalytic activities of manganese oxides with different oxidation states in the catalytic carbonylation of n-butylamine by CO 2 follow the order of MnO 2 > Mn 3 O 4 > Mn 2 O 3 > MnO, in which MnO 2 with the Mn 4+ ion exhibited as high as 91.60% yield of N,N'-dibutylurea using polyethylene glycol 400 (PEG 400) as solvent under the reaction conditions of 160 ℃, 4 h, and 5.0 MPa. And then a series of characterization including XRD, XPS, H 2 -TPR, and CO 2 /NH 3 -TPD were performed on the as-synthesized manganese oxides with different oxidation states, indicating that the content of oxygen vacancy on the surface of the manganese oxides with different oxidation states plays a key role in catalytic performances of the carbonylation of n-butylamine with CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Xinyu Liu,Jianlong Wang
The selective oxidation of ammonia to dinitrogen gas in some special wastewater is of paramount significance, but still a challenge. In this study, chlorine radical (Cl•)-mediated oxidation process was developed to realize the selective oxidation of NH 4 + -N to N 2 , in which Cl• was generated in Co 2+ /peroxymonosulfate (PMS)/chloridion (Cl − ) system. The effect of various operational parameters on the efficiency and selectivity of ammonia oxidation to N 2 was investigated, such as PMS concentration, Co 2+ concentration, Cl − concentration and pH value. The experiment results showed that Cl•-mediated NH 4 + -N oxidation reaction exhibited high NH 4 + -N removal efficiency and considerable selectivity to N 2 in the range of pH from 2.0 to 6.5. The removal efficiency of NH 4 + -N was 90.39%, and the selectivity of NH 4 + -N to N 2 achieved up to 97.16%. The possible mechanism for high efficient and selective oxidation of NH 4 + -N to N 2 was tentatively proposed. The process developed in this study could provide a novel technology for the treatment and selective oxidation of ammonium in some special types of ammonium-containing wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysis Science & Technology
·
2023
·Vol. 13
·期 3
·898-909
·
IF 5
Haohui Gu,Feng Liang,Xiaohan Wang,Shuaibing Wu,Gongye Lv,Haijun Zhang,Shaowei Zhang,Lilin Lu,Zhijun Dong
The design of heterojunction photocatalysts is regarded as a very effective method to solve the high recombination rate of photogenerated charge carriers for CO2 photoreduction into hydrocarbons, and interface engineering is urgently required to achieve high efficiency. Herein, graphitic carbon nitride (g-C3N4, CN) was uniformly grown on the surface of nitrogen-doped rutile TiO2 (NT) nanorods by in situ deposition, and a NT@CN core/shell step-scheme (S-scheme) heterojunction system composed of NT nanorods and g-C3N4 was synthesised. The as-synthesised heterojunction containing 55 wt% g-C3N4 delivered the highest CO2 photoreduction activity (33.35 μmol g−1 for CO) without additional cocatalysts or external sacrificial agents, which was 7.1 times higher than that of bare NT nanorods. This improved CO2 reduction activity was attributable to the large surface area and impactful S-scheme heterostructure, which imparted the catalyst with sufficient visible-light harvesting ability, promoted the segregation and transformation of the photoinduced charge pairs, and enhanced the redox ability of the carriers. Concurrently, the NT@CN photocatalyst exhibited excellent reusability and stability. This work offers a new basis for designing and preparing rutile TiO2-based S-scheme heterojunctions with enhanced CO2 reduction performance.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 4
·928-935
·
IF 4
Yidan Sun,Fang Liu,Xuerong Wang,Kangkang Lu,Xiaojing Liu,Yan Huang,Fengjiao Yu,Yuhui Chen
Efficient catalysts are highly desirable for the selective electrochemical CO2 reduction reaction (CO2RR). Ni single-atom catalysts are known as promising CO2RR catalysts, while Ni NPs are expected to catalyze the competing HER. In this work, we have modified the Ni NPs by encapsulating them into porous Ni–N–C nanosheets (Ni@Ni–N–C), to boost the synergy between Ni NPs and dispersed Ni–N species towards CO2RR. The CO faradaic efficiency (FECO) reached 96.4% at −0.9 V and retained over 90% in a wide potential window. More importantly, FECO values of over 94% have been obtained from −50 to −170 mA cm−2 with a peak FECO of 99% in a flow cell. Our work demonstrates that the surface modification of Ni NPs can inhibit the unexpected HER and activate the surface sites, offering a practical design strategy for CO2RR catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Ying He,Zhuoyue Wang,Aihui Cao,Xiao Xu,Junqiang Li,Bo Zhang,Longtian Kang
The zinc-based photocatalysts for CO 2 reduction have attracted increasing attention, however, usually exhibit low CO 2 -to-CH 4 selectivity. Here, the graphene oxide (GO)-coated zinc tetraphenylporphyrin (ZnTPP/GO) nanocomposites are successfully synthesized through a simple method. It is found that with the increase of GO content, the crystallinity of ZnTPP nanocrystals enhances with the size decrease, and then the light absorption can easily match with the solar spectrum. The optimal ZnTPP/GO sample exhibits the CH 4 evolution rate of 41.6 μmol g −1 h −1 and CH 4 selectivity of >95%, which are higher than those of ZnTPP nanocrystals (7.8 μmol g −1 h −1 and 50.3%). The systematic characterizations confirm that the generation of axial coordinated Zn O C bonds between ZnTPP and GO plays a key role in the formation of ZnTPP/GO nanostructure and their synergic effect on photocatalytic CO 2 reduction. The encapsulation of GO on ZnTPP nanocrystals not only promotes the CO 2 adsorption, interfacial reaction, and stability, but also accelerates the separation of photoinduced carriers on ZnTPP (0.1 ps vs. 425.9 ps), the transportation from ZnTPP to GO (2.3 ps vs. 83.6 ps), and their final enrichment on GO. This work provides a new strategy to apply graphene and organic nanomaterials in artificial photosynthesis.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2023
·
IF 5.9
Zhen Zhang,Shuang Zhao,Zhifang Fei,Kunfeng Li,Guobing Chen,Jun Chen,Peng Zhang,Zichun Yang
Silica aerogels have already been recognized as potential candidates in the fields of thermal insulation, sorption, and separation, but the intrinsic brittleness and cumbersome preparation process limit their broad applications. In this work, a simple self-catalyzed gelling strategy was applied to prepare organic–inorganic in situ hybrid aerogels (OIHAs) derived from bis[3-(triethoxysilyl)propyl]amine (BTPA) and methyltrimethoxysilane (MTES). The Si–CH3 groups from MTES make it possible for OIHAs to be prepared through ambient drying and exhibit good hydrophobicity. Owing to the alkalinity of the amine groups from BTPA, self-catalyed hydrolyzation and condensation reactions occur between two silicon precursors to build a uniform pearl-chain nanoporous structure. The high specific surface area and amine groups existing on the nanoskeleton surface of the obtained OIHAs endow them with fascinating CO2 capture ability up to 5.89 mmol/g at 298 K and 100 kPa, which are significantly higher than the values of other aerogels reported under the similar conditions. Furthermore, ultralow thermal conductivity (as low as 20.1 mW/(m·K) at 25 °C), high strength (up to 2.38 MPa), and great elasticity (fully recoverable elastic strain of 14%) are achieved together for the OIHAs due to the organic–inorganic in situ cross-linked architecture. The as-prepared OIHAs with versatile properties have great application prospects in the fields of building thermal insulation and CO2 capture. The self-catalyzed gelling strategy provides an alternative routine for the simple preparation of silica-based aerogels.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Zhao Du,Huayi Cai,Zhiyuan Zhao,Zhonglu Guo,Jing Lin,Yang Huang,Chengchun Tang,Guifeng Chen,Yi Fang
Herein, the graphene quantum dots (GQDs) as a photosensitizer have been introduced on the surface of C-doping porous BN nanoribbons (C-BNNR) to form a series of 0D/1D GQDs/C-BNNR heterojunctions as metal-free catalysts with excellent photocatalytic activity. the C-BNNR with sensitization of GQDs is innovatively applied to the field of CO 2 photocatalytic reduction. The results reveal that GQDs/C-BNNR heterojunctions exhibit excellent optical properties and photocatalytic activity. The CO production rate of GQDs/C-BNNR-3 (33.47 μmol g -1 h -1 ) is 14.49, 4.60 and 2.95 times higher than GQDs (2.31 μmol g -1 h -1 ), BNNR (7.27 μmol g -1 h -1 ) and C-BNNR (11.34 μmol g -1 h -1 ), respectively. This work demonstrates that the addition of GQDs can significantly improve the light utilization of C-BNNR without any effect on the structure. In addition, the strong interaction between the GQDs and C-BNNR leads to the formation of a built-in electric field. It allows photogenerated electrons in GQDs to be transferred into C-BNNR and complexed with holes. As a result, the photogenerated electrons in C-BNNR are induced to participate in the CO 2 photocatalytic reduction process. Meanwhile, GQDs/C-BNNR possess certain CO 2 photocatalytic reduction ability in the NIR region due to the upconversion ability of GQDs. This work pioneer the application of GQDs/C-BNNR heterojunctions in CO 2 photocatalytic reduction and further provides new ideas for the design of novel metal-free catalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2023
·
IF 9.2
Xiang Xue,Di Gu,Yuwei Qin,Xue Lin,Qi Cui,Zixuan Li,Rui Mu,Hong Jiang,Tingting Jiang,Hongjun Wu,Baohui Wang
Herein, a solar-driven, CO 2 -fed rechargeable molten salt carbon battery is reported, which has the characteristics of capacity-tunable and noble metal catalyst-free, and continuously captures CO 2 and converts it into fuel (CO). The battery uses mixed molten carbonate as the electrolyte, which has excellent reversible electrode kinetics and superior ionic conductivity , providing the rechargeable molten salt battery excellent storage capacity and power capability. The battery is capable of continuously absorbing CO 2 from the atmosphere and converting it into carbon and carbon monoxide when it is charged. The carbon accumulates at the cathode and is used to discharge, thus producing carbon monoxide, constituting a battery capable of continuously converting carbon dioxide into carbon monoxide and storing electrical energy. The battery is perfectly matched to solar thermal and solar electricity and can be used as a novel method of storing solar energy. This paper investigates the battery performance under four electrolyte conditions. The results show that the battery has the most superior discharge performance when using a Li-Na-K-Cs-Li 2 O mixed electrolyte, maintaining ultra-high faradaic efficiency (100%) for 20 cycles. This work provides a new horizon for CO 2 conversion and solar energy utilization.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Zhilin Jiang,Ruiqi Zhang,He Zhao,Jiayu Wang,Lingrui Jia,Yating Hu,Kang Wang,Xitao Wang
High-entropy oxides (HEOs) have become very promising materials due to their excellent properties. In this work, inspired by the abundant surface defects and narrow band gaps of high-entropy oxides, a high-entropy oxide (Ga 0.2 Cr 0.2 Mn 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 with the Fd -3m spinel structure was designed and synthesized by sol–gel method for photocatalytic CO 2 conversion. The results showed that the calcination temperature had a very important effects on the formation of high-entropy oxide, structural defects and the element dispersion. Meanwhile, (Ga 0.2 Cr 0.2 Mn 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 HEO with appropriate calcination temperature exhibited excellent photocatalytic activity and stability for CO 2 reduction with water vapor without any co-catalyst under visible light due to its ultra-narrow bandgap (1.6 eV), abundant structural defects, uniform dispersion of metal elements and suitable band structure.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Yang Wang,Shiyuan Lin,Meng Li,Chuanyong Zhu,Hao Yang,Pei Dong,Mingjie Lu,Wenhang Wang,Jianlin Cao,Qiang Liu,Xiang Feng,Han Hu,Noritatsu Tsubaki,Mingbo Wu
The direct transformation of CO 2 into valuable chemicals with the aid of sustainable energy-generated H 2 has attracted enormous interest owing to the integrated functions of carbon elimination and non-fossil fuel-derived products supply. As one of the most promising catalysts for CO 2 hydrogenation, the chemical properties of Fe-based catalysts, such as electronic structure and coordination environment, have been widely studied. However, the mass/heat transfer effects in Fe-based catalysts are also crucial to the targeted product selectivity and catalytic stability, but have been rarely investigated due to the lack of facile fabrication protocols. Herein, we precisely fabricate and tailor the architecture of the Fe-based monolithic catalysts by a direct ink writing (DIW)-type three-dimensional (3D) printing technology under the guidance of the computationally controlled printing procedure. The Fe-based monolithic catalyst with spiral-type architecture delivers extremely high light olefins selectivity (52.6%) and space time yield (STY, 451.8 g CH2 kg cat −1 h −1 ) from CO 2 hydrogenation. Based on the mass-transfer simulation, the spiral-structured channels in the Fe-based monolithic catalyst lower the coverage of intermediates and products on the catalytic interface due to the optimal mass-transfer effect, thus maximizing the utilization of active sites and timely terminating the carbon-chain growth. More in-depth, the density functional theoretical (DFT) simulations verify that the relatively electron-rich catalytic interface with low intermediate coverage could facilitate the desorption of olefins and decelerate the C-C coupling step, which synergistically guarantee the enhanced light olefins synthesis performance. Furthermore, the enhanced heat-transfer effect endowed by the 3D architecture prolongs the life-time of catalyst by avoiding undesirable active site aggregation and carbon deposition. The powerful strategy for catalyst fabrication not only provides a new concept of regulating the CO 2 hydrogenation performance of Fe-based catalysts but also holds a great promise to spread into other catalytic systems for targeted synthesis.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Mingna Chu,Kai Cui,Yan Zhou,Xiuzhi Yuan,Wei Qin,Yang Li,Xiaohong Wu
Enhancing the photoreduction of carbon dioxide (CO 2 ) to produce valuable chemicals, such as carbon monoxide (CO), is of significant importance. The bottleneck in developing advanced catalysts lies in the rational design of catalytic centers with efficient CO 2 activation and hydrogen proton production. In this work, palladium nanoparticles (Pd NPs) were successfully modified on UiO-66-NH 2 -Zn SAs (UN-Zn SAs) by a photo-deposition method. The optimized photocatalyst , 4 Pd NPs-UN-0.7Zn SAs, demonstrated exceptional performance in converting CO 2 to CO, exhibiting approximately 1.4-fold and 7.8-fold enhancements compared to UN-0.7Zn SAs and UN, respectively. A combination of time-resolved photoluminescence spectroscopy and electron paramagnetic resonance results unveiled that the introduction of Pd NPs effectively promoted the photogenerated charge separation and facilitated water activation to produce more hydrogen protons. The generated hydrogen protons were subsequently coupled with nearby CO 2 that was activated by Zn SAs, thus achieving the facile water-activation-induced CO 2 reduction process. Theoretical calculations further confirmed that the heterogeneous synergistic effects between Zn SAs and Pd NPs lowered the energy barrier for the rate-limiting step of CO 2 conversion to COOH* , thereby achieving efficient photocatalytic CO 2 reduction reactions. This work provides a new perspective on the development of efficient catalysts for the effective conversion of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子