Materials Today Communications
·
2022
·
IF 3.662
Tao Wei,Zhimeng Wang,Mi Zhang,Qi Zhang,Jiahao Lu,Yanyan Zhou,Cheng Sun,Zidong Yu,Yu Wang,Man Qiao,Sai Qin
As a common filler in polymer electrolytes , Metal-organic frameworks (MOFs) has been studied extensively in recent years. In this study, we propose a novel solid composite electrolytes (SCEs) based on PEO/LiTFSI/a-MIL-100 (Fe)/PVDF by using a straightforward solution-casting method. Unactivated and activated MIL-100 (Fe) (a-MIL-100 (Fe)) as the fillers were compared, and the interactions of functional groups of unactivated MIL-100 (Fe) and a-MIL-100 (Fe) with anions of electrolyte salts through Lewis acid-base interaction are studied with density functional theory (DFT) calculations. The influences of different a-MIL-100 (Fe) contents on electrochemical performances were also examined. The Li/SCEs/LiFePO 4 cell displayed high average discharge capacities of 161.8 mAh g −1 , 166.8 mAh g −1 , 158.9 mAh g −1 , 146.2 mAh g −1 and 92.6 mAh g −1 at the rate of 0.1, 0.2, 0.5, 1 and 2 C at 60 ℃, respectively, without liquid electrolytes. This work might provide new insight into the role of activated MOFs fillers in polymer electrolytes.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Kunyu Chen,Zhanguo Cui,Zhiqiang Zhang,Heliang Pang,Jing Yang,Xiaojiang Huang,Jinsuo Lu
The present study developed a prolonged oxidizable sulfur(IV)/ferrate(VI) system for the generation of hydroxyl radical ( OH) and sulfate radical (SO 4 − ) within 120 min, and proposed a reaction mechanism. In the presence of H + in solution, the S(IV)/Fe(IV) system provided excellent oxidation performance of refractory organics O,O-dimethyl-S-methylcarbamoyl methyl phosphorothioate (dimethoate, a widely used organophosphorus pesticide) within 120 min. The degradation efficiency of dimethoate in the bisulfite/Fe(VI) system (e.g., 90.06% dimethoate) was higher than that in the sulfite/Fe(VI) system (e.g., 51.03% dimethoate), while Fe(VI) alone degraded 27.81% of dimethoate. In the S(IV)/Fe(VI) system, the active species consisted of Fe(VI) (including the highly-reactive iron-based intermediate species, i.e. Fe(V) and Fe(IV)), OH and SO 4 − , with OH being identified as the main active species, contributing more than half of the total. The degradation mechanism of dimethoate in the S(IV)/Fe(VI) system mainly included the cleavage of the S-P bond, C-S bond and the oxidation of the P = S bond. Two plausible degradation pathways were proposed based on the detected transformation products. Dimethoate could be efficiently degraded when the [bisulfite]/[Fe(VI)] molar ratio was 4:1 with a low Fe(VI) dosage (218 µM), the changes in HA and HCO 3 − concentrations affected the transformation of dimethoate, the presence of Cl − , SO 4 2− and NO 3 − had a negligible effect, and the S(IV)/Fe(VI) system performed well in real waters. The S(IV)/Fe(VI) system has excellent oxidation performance for the removal of organic pollutants in water, with a final pH (pH = 6.6) close to neutral and ultimate products of SO 4 2− and Fe(OH) 3 , which has great potential for engineering applications.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·
IF 7.139
Qijia Zhu,Jie Lian,Xu Chen,Jinyu Zhao,Yu Gao,Xiaomin Wang
Proton exchange membrane fuel cells (PEMFCs) are severely restricted by slow cathodic oxygen reduction reaction (ORR) kinetics and expensive noble metal platinum catalysts . In particular, the ORR serves as a key process in electrochemical conversion, which significantly impacts the overall performance of the related devices. Accordingly, we proposed a facile and novel dual-optimization strategy to construct abundant Fe-N X active site embedded hierarchical reticulated porous structure catalysts. Initially, an extensive encapsulated Fe and Fe–N complexes is created in Fe modified zeolitic-imidazolate-frameworks-8/graphene oxide (Fe-ZIF-8/GO) precursor, subsequently, the thermal melting and restructuring process fosters the structural transformation of the precursor to robust and open nano-porous frameworks. In the meanwhile, the encapsulated Fe in the pores of the precursors and the pre-existing Fe–N coordination structures are converted into new Fe-N X active sites. This approach realizes the dual optimization of Fe-N X active site density enhancement and utilization, making the optimal catalyst Fe and N-doped porous carbon/graphene nanosheets-1 (Fe-NPC/GNs-1) exhibits a half-wave potential (E 1/2 ) of 0.771V under acidic medium, and E 1/2 of 0.917 V toward the ORR in alkaline conditions. The activity and stability under alkaline conditions exceed even that of commercial Pt/C (with negligible potential decay after 10,000 cycles under alkaline conditions), and also showed its capacity to substitute platinum-based catalysts and the potential application in Zn−air batteries.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PAPERS
·
2022
·Vol. 76
·期 7
·4379-4392
·
IF 2.146
Zhang Huixian,Hu Xizhou,Xia Hong,Zhou Youxiang,Peng Lijun,Wu Jianyuan,Peng Xitian
Phenoxy carboxylic acid herbicides (PCAs) are widely used in agricultural production. However, due to their potential threat to human health, it is necessary to develop efficient analysis method for monitoring PCA concentration in environment and food samples. Based on dispersive micro-solid phase extraction (D-μ-SPE) with amine-functionalized metal–organic framework MIL-101(Fe)-NH 2 , a selective, sensitive, and cost-efficient method was proposed for the extraction of PCAs from environmental water and rice samples in this study. From the perspective of adsorption kinetics and isotherms, interaction mechanisms between MIL-101(Fe)-NH 2 and PCAs were investigated. Key parameters of D-μ-SPE procedure including adsorbent dosage, solution pH, ionic strength, eluting solution, and washing solutions were optimized. Using of small amount of MIL-101(Fe)-NH 2 could achieve desirable extraction effect due to its large surface area and multiple interactions with PCAs. Under the optimized D-μ-SPE conditions, calibration curves of 8 PCAs were linear within a concentration range of 0.05–5 ng/mL for water samples ( r 2 > 0.9898) and 0.5–50 ng/g for rice samples ( r 2 > 0.9879). Limits of detection of water and rice samples were as low as 0.004–0.008 ng/mL and 0.05–0.1 ng/g, respectively. The recoveries of 8 PCAs ranged from 83.0 to 109.3%. Both inter- and intra-day relative standard deviations were less than 10.3%. Our proposed method was successfully employed in actual environmental water and rice samples.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2022
·
IF 13.7
Jing Zhou,Yitian Hu,Yu-Chung Chang,Zhiwei Hu,Yu-Cheng Huang,YaLei Fan,Hong-Ji Lin,Chih-Wen Pao,Chung-Li Dong,Jyh-Fu Lee,Chien-Te Chen,Jian-Qiang Wang,Linjuan Zhang
The oxygen evolution reaction (OER) is of vital importance for electrochemical energy conversion technologies. The use of metal–organic framework (MOF) catalysts after postprocessing is an important method to optimize catalytic activity; however, little attention has been paid to the transformation of the electronic structure and coordinated ions under operando conditions. Here, we focus on a Prussian blue analogue (PBA) with the formula Na2Co2+[Fe2+(CN)6]·nH2O after postprocessing at a temperature of 400 °C. The catalysts exhibit a significant improvement in the OER activity with an overpotential of 254 mV against 320 mV for the initial PBA at 10 mA cm–2 in 1 M KOH. Our ex situ soft X-ray absorption spectroscopy (XAS) results demonstrate that some of the high-spin Co2+ and low-spin Fe2+ ions of PBA exhibit exchange with N and C ligands. Our fast operando hard XAS study revealed a dynamic evolution process of the transformation of ligands from N(C) in the initial Na2Co[Fe(CN)6]·nH2O to oxygen and the formation of pure low-spin Co3+ oxide and high-spin Fe3+ oxide after OER. The amorphous (Co,Fe)OOH chemical state was identified as the catalytically active state based on our operando X-ray spectroscopy results. The results of this study provide insights into a dynamic evolution process of MOFs after postprocessing and the formation of real active sites during electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2022
·
IF 5.089
Kuan Wang,Zhe Cao,Junlei Wang,Zhen-Hong He,Dan Wang,Rong-Rong Zhang,Weitao Wang,Yang Yang,Zhao-Tie Liu
The development of non-precious metal catalysts in heterogeneous catalytic processes is of great importance to the hydrogenation of quinolines for both theoretical and industrial applications. Herein, an effective non-precious metal catalyst, 58% Fe 4 Ni 6 Cu 5 /MCM-41, was developed to catalyze the hydrogenation of quinolines under the green and mild conditions, which can achieve 97.5% conversion and exceeding 98% selectivity to tetrahydroquinoline in solvent-free at low temperature of 50 °C. Moreover, the acceptable results of the reusability and gram scale-up experiments proved an industrial application potential of the as-prepared catalyst. Meanwhile, in cyclohexane system, 58% Fe 4 Ni 6 Cu 5 /MCM-41 catalyst can further realize a higher activity of the hydrogenation at a lower temperature of 40 °C, achieving 98.2% conversion and 98% selectivity to tetrahydroquinoline. The existence of Fe-Ni and Ni-Cu alloys in Fe 4 Ni 6 Cu 5 /MCM-41 catalyst was demonstrated by TEM, XRD, XPS, H 2 -TPD, and Raman spectroscopy. And, Fe-Ni and Ni-Cu alloys can be well dispersed onto MCM-41 molecular sieves. For Fe 4 Ni 6 Cu 5 /MCM-41 catalyst, quinoline molecules can be adsorbed by Fe 3+ species on the surface of Fe-Ni alloy through the coordination, while hydrogen molecules can be adsorbed and activated by Ni-Cu alloy. Under the synergism of Fe-Ni and Ni-Cu alloys, the highly effective and selective hydrogenation of quinolines was achieved at low temperature and in solvent-free system. The present approach offers a prospective idea for building non-precious metal catalysts to realize the effective hydrogenation of N-heterocyclic compounds under mild conditions.
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2022
·
IF 10.753
Qiao Li,Xinyue Ma,Chengsi Qi,Rui Li,Wei Zhang,Jiansheng Li,Jinyou Shen,Xiuyun Sun
Effective removal of Sb(III) and Sb(V) has long been an urgent task for protecting human health and environment. In this study, novel magnetic mesoporous Fe Mn binary oxides (MMFMs) were fabricated via calcinating the Mn encapsulated carboxymethyl cellulose-Fe(III) hydrogel, and the structure of MMFMs were closely related to the Fe:Mn ratio. Owing to the mesoporous structure together with synergistic effect of Fe Mn binary component, the MMFMs exhibited excellent mass transfer and adsorption ability to Sb(III) and Sb(V). MMFM 3 achieved a maximum Sb(III) and Sb(V) adsorption capacity of 281.5 and 204.6 mg/g, respectively. Co-existing anions of Cl − , NO 3 − and SO 4 2− exhibited marginal influence on the adsorption for both Sb(III) and Sb(V), except the PO 4 3− for Sb(III) and SiO 3 2− or PO 4 3− for Sb(V). X-ray photoelectron spectroscopic investigation revealed that high valence Mn(IV) was mainly responsible for the oxidation transformation of the highly toxic Sb(III) into less toxic Sb(V), while the FeO x content played major role for the adsorption of Sb(V). The generated inner-sphere Fe O Sb complex between Fe-OH groups and Sb(III/V) dominantly contributed to the removal of Sb(III/V). Overall, mesoporous structure, magnetic separation ability, excellent adsorption performance together with exceptional regeneration properties demonstrated the great potential of MMFMs for Sb(III/V) remediation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2021
·
IF 5.165
Dianfa Zhao,Jie Liu,Lijuan Zhang,Yunshan Zhou,Yuxu Zhong,Yang Yang,Chengcheng Huang,Yong’an Wang
Maintaining a long-term continuous and stable reactivator blood concentration to treat organophosphorus nerve agent poisoning using acetylcholinesterase (AChE) reactivator pralidoxime chloride (2-PAM) is very important yet difficult. Because the flexible framework of MIL-88B(Fe) nanoparticles (NPs) can swell in polar solvents, pralidoxime chloride (2-PAM) was loaded in MIL-88B(Fe) NPs (size: ca. 500 nm) by stirring and incubation in deionized water to obtain 2-PAM@MIL-88B(Fe), which had a maximum drug loading capacity of 12.6 wt %. The as-prepared composite was characterized by IR, powder X-ray diffraction (P-XRD), scanning electron microscopy (SEM), ζ-potential, Brunauer–Emmett–Teller (BET), and thermogravimetry/differential thermal analysis (TG/DTA). The results showed that under constant conditions, the maximum drug release rates of 2-PAM@MIL-88B(Fe) in absolute ethanol, phosphate-buffered saline (PBS) solution (pH = 7.4), and PBS solution (pH = 4) at 150 h were 51.7, 80.6, and 67.1%, respectively. This was because the composite showed different swelling behaviors in different solvents. In PBS solution with pH = 2, the 2-PAM@MIL-88B(Fe) framework collapsed after 53 h and released 100% of 2-PAM. For mice after intragastric poisoning with sarin (a neurotoxic agent), an atropine-assisted 2-PAM@MIL-88B(Fe) treatment experiment revealed that 2-PAM@MIL-88B(Fe) continuously released 2-PAM for more than 72 h so that poisoned AChE was continuously and steadily reactivated. The reactivation rate of AChE was 56.7% after 72 h. This composite is expected to provide a prolonged, stable therapeutic drug for the mid- and late-stage treatment of neurotoxic agent poisoning.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2023
·Vol. 148
·期 13
·6013-6026
·
IF 4.4
Hu Yinghui,Wang Xuwen,Hao Jingwei,Jiang Shouhang,Zhang Jian,Yang Yulin,Lin Kaifeng,Zheng Jian,Shuai Yong
The excellent thermal decomposition efficiency of ammonium perchlorate (AP) is of great importance for obtaining propellant with fast specific impulse. In this study, four CuM x O y catalysts, including M = Fe, Ni, Co, and Zn, were synthesized and then used for catalyzing AP decomposition and hydroxyl-terminated polybutadiene (HTPB)-based solid propellant combustion. The existed synergistic effect in CuM x O y catalysts improved the catalytic activity and the most active CuZnO catalyst decreased the AP high-temperature decomposition temperature (HTD) from 412.5 to 289.4 °C. Kinetic studies indicated that CuM x O y catalysts inhibited the conversion of N 2 O to a fully oxidized product and decreased the activation energy ( E a ) in HTD to concentrate AP decomposition to significantly decrease the heat loss, thereby increasing their decomposition efficiency. When applying the CuM x O y catalysts in the HTPB (hydroxyl-terminated polybutadiene)-based solid propellant, a faster burning rate and stronger optical emission spectrum were obtained. The CuM x O y catalyst is a potential additive for the preparation of outstanding combustion solid propellants. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Lan Ma,Teng Wang,Yan Wan,Guilan Zhang,Xinyan Li,Minghang Jiang,Liyun Zhang
Developing a novel type of high-performance catalytic separation membrane with multifunctional remediation towards efficiently complex wastewater has been an anticipated goal. Inspired by the natural soil filtration system, we successfully constructed a soil-root-like Fe(Ⅲ)-MOF/AgNWs heterostructured membrane (AgNWs/CMC@NMB) with photo-fenton degradation property through a facile self-assembly approach under vacuum. Herein, sodium carboxymethyl cellulose(CMC) and silver nanowires (AgNWs) acted as the root, which were boned with the soil-like of the nubbly NH 2 -MIL-88B(Fe) aggregation by electrostatic force and hydrogen bonding interaction to form a stable soil-like heterostructured membrane. The resultant AgNWs/CMC@NMB membrane revealed remarkable selective wettability (water contact angles (WCAs) ∼0°, underwater oil contact angles (UWOCAs) > 155°), and exhibited splendid removal efficiency (>99 %) for insoluble oils under separation flux of 1343 L m −2 h −1 bar −1 . Profiting from a soil-root-like porous filter structure, AgNWs/CMC@NMB membrane achieved concurrent treatment of the insoluble oils and soluble dyes by one-step efficient filtration, notably, the disposal efficiency for anionic and cationic dyes by soil-root-like structure reached above 96.7 %. Moreover, acting like roots in the soil to transport water and stabilize the soil, AgNWs facilitated electron transfer of the photo-Fenton system of Fe-MOF and enhanced the photocatalytic degradation capacity of composite membrane for the organic contaminant , which also endowed the photo-induced regeneration of fouled membrane. Overall, the construction of Fe(Ⅲ)-MOF/AgNWs composite membrane with a Soil-Root-like heterostructure emerged as a feasible route to achieve the complex sewage remediation.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2023
·
IF 13.3
Wanqing Zhang,Jie Ying,Hongwei Liu
Transition metal-based catalysts possess high catalytic activity for oxygen evolution reaction (OER). However, the preparation of high-performance OER electrocatalysts using simple strategies with a low cost still faces a major challenge. Herein, this work presents an innovative, in situ-induced preparation of the Fe 2 O 3 , FeS, and NiS nanoparticles, supported on carbon blacks (CBs) (denoted as Fe 2 O 3 -Fe(Ni)S/C) as a high-efficiency oxygen evolution electrocatalyst by employing biomineralization. Biomineralization, a simple synthesis strategy, demonstrates a huge advantage in controlling the size of the Fe 2 O 3 and Fe(Ni)S nanoparticles, as well as achieving uniform nanoparticle distribution on carbon blacks. It is found that the electrocatalyst Fe 2 O 3 -Fe(Ni)S/C-200 shows a good OER electrocatalytic activity with a small loading capacity, and it has a small overpotential and Tafel slope in 1 m KOH solution with values of 264 mV and 42 mV dec −1 , respectively, at a current density of 10 mA cm −2 . Additionally, it presents good electrochemical stability for over 24 h. The remarkable and robust electrocatalytic performance of Fe 2 O 3 -Fe(Ni)S/C-200 is attributed to the synergistic effect of Fe 2 O 3 , FeS, and doped-Ni species as well as its distinct 3D spherical structure. This approach indicates the promising applications of biomineralization for the bio-preparation of functional materials and energy conversion.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Bing Wang,Kun Tian,Xingaoyuan Xiong,Hongyang Ren
In this study, the microelectrolysis system was applied to generate strong reductants, such as free hydrogen [H] and O ∙ , and thus removing N -Methyldiethanolamine (MDEA) in overhaul wastewater. Effects of initial influent pH, mass ratio of filings to wastewater, air aeration rate, and reaction temperature on the removal of MDEA were investigated intensively. Experimental results indicate that optimum removal rate of MDEA can be obtained at pH = 2, inlet air rate = 1 L min −1 , mass ratio of filings to wastewater = 1:1 and temperature = 25 °C. About 96.0% Total Organic Carbon (TOC) in overhaul wastewater can be mineralized by ozonation–microelectrolysis–ozonation (OMIO) treatment process. By analyzing the effluent at various stages, it was established that microelectrolysis played a leading role in the destruction of MDEA. The degradation mechanism of MDEA has been clarified through detecting the degradation products with Gas Chromatography–Mass Spectrometer (GC–MS). Subsequently, ozone reacts with intermediate products generated by MDEA degration through OH· pathway under alkaline condition. In short, these results suggest that OMIO system should be proposed as a promising treatment process for the MDEA wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子