文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4057至4068个,产品总数8,185个

切换升序
LIGHT
DALTON TRANSACTIONS · 2023 ·Vol. 52 ·期 22 ·7447-7456 · IF 4

V-doped Ni2P nanoparticle grafted g-C3N4 nanosheets for enhanced photocatalytic hydrogen evolution performance under visible light

Qian Chen,Jianfeng Huang,Ting Xiao,Liyun Cao,Dinghan Liu,Xiaoyi Li,Mengfan Niu,Guoting Xu,Koji Kajiyoshi,Liangliang Feng

Exploring low-cost and highly active photocatalysts with noble metal-free cocatalysts is of great significance for photocatalytic hydrogen evolution under simulated sunlight irradiation. In this work, a novel V-doped Ni2P nanoparticle loaded g-C3N4 nanosheet is reported as a highly efficient photocatalyst for H2 evolution under visible light irradiation. The results demonstrate that the optimized 7.8 wt% V-Ni2P/g-C3N4 photocatalyst exhibits a high hydrogen evolution rate of 271.5 μmol g−1 h−1, which is comparable to that of the 1 wt% Pt/g-C3N4 photocatalyst (279 μmol g−1 h−1), and shows favorable hydrogen evolution stability for five successive runs within 20 h. The remarkable photocatalytic hydrogen evolution performance of V-Ni2P/g-C3N4 is mainly due to the enhanced visible light absorption ability, the facilitated separation of photo-generated electron–hole pairs, the prolonged lifetime of photo-generated carriers and the fast transmission ability of electrons.

CAS / MDL: 18497-13-7 7681-53-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry C · 2021 ·Vol. 9 ·期 46 ·16682-16692 · IF 7.393

Improving the efficiency and stability of inorganic red perovskite light-emitting diodes using traces of zinc ions

Xiao-Yi Cai,Yi Yu,Yong-Chun Ye,Yang Shen,Ming-Lei Guo,Jing-Kun Wang,Kong-Chao Shen,Yan-Qing Li,Jian-Xin Tang

Metal halide perovskite light-emitting diodes (PeLEDs) have been recognized as emerging candidates for next-generation solution-processed electronic display technology, and great progress has been made in recent years. However, their poor operational stability is yet to be solved. Here, we present a reformative all-inorganic red-emission PeLED based on the passivation effect caused by the incorporation of zinc ions into perovskites for enhancing the efficiency and operational stability. A high-quality quasi-two-dimensional perovskite CsPbI3−xBrx thin film with good crystallinity is obtained, benefiting from the combination of large organic ammonium ions (PEA+ ions) and inorganic salt zinc iodide (ZnI2). As a result, ZnI2-passivated CsPbI3−xBrx PeLEDs emitting at 666 nm show a maximum external quantum efficiency of 9.93% and a maximum brightness of 4258 cd m−2. More importantly, the PeLEDs achieve a long half-lifetime of about 2667 h at an initial luminance of 100 cd m−2. This work provides a facile method to obtain stable and efficient red-emission PeLEDs.

CAS / MDL: 10139-47-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2021 ·Vol. 12 ·期 1 ·517-527 · IF 3.361

Light-responsive metal–organic framework sheets constructed smart membranes with tunable transport channels for efficient gas separation

Qingping Xin,Meixue Zhao,Jianping Guo,Dandan Huang,Yinan Zeng,Yuhang Zhao,Teng Zhang,Lei Zhang,Shaofei Wang,Yuzhong Zhang

Exploring a new type of smart membrane with tunable separation performance is a promising area of research. In this study, new light-responsive metal–organic framework [Co(azpy)] sheets were prepared by a facile microwave method for the first time, and were then incorporated into a polymer matrix to fabricate smart mixed matrix membranes (MMMs) applied for flue gas desulfurization and decarburization. The smart MMMs exhibited significantly elevated SO2(CO2)/N2 selectivity by 184(166)% in comparison with an unfilled polymer membrane. The light-responsive characteristic of the smart MMMs was investigated, and the permeability and selectivity of the Co(azpy) sheets-loaded smart MMMs were able to respond to external light stimuli. In particular, the selectivity of the smart MMM at the Co(azpy) content of 20% for the SO2/N2 system could be switched between 341 and 211 in situ irradiated with Vis and UV light, while the SO2 permeability switched between 58 Barrer and 36 Barrer, respectively. This switching influence was mainly ascribed to the increased SO2 adsorption capacity in the visible light condition, as verified by adsorption test. The CO2 permeability and CO2/N2 selectivity of MMMs in the humidified state could achieve 248 Barrer and 103.2, surpassing the Robeson's upper bound reported in 2019.

CAS / MDL: 10026-24-1 97-67-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2021 · IF 6.707

In situ fabrication of Bi2O3/C3N4/TiO2@C photocatalysts for visible-light photodegradation of sulfamethoxazole in water

Tao Ke,Shuyi Shen,Kun Yang,Daohui Lin

Developing visible-light-driven photocatalysts with high charge separation and transfer efficiency to degrade organic pollutants in wastewater remains a major issue. In this work, quaternary Bi 2 O 3 /C 3 N 4 /TiO 2 @C (BCTC) hybrids were successfully fabricated by hydrothermal and calcination two-step method using Bi(NO 3 ) 3 ·5H 2 O, C 3 N 4 , and Ti 3 C 2 as precursors. The optimized BCTC hybrids with the dosage of 1 g L −1 (BCTC-2%) exhibited high photocatalytic activity, degrading 100% sulfamethoxazole (SMZ, 5 mg L −1 ) within 100 min under visible light irradiation. Moreover, the photocatalytic degradation rate of SMZ by the quaternary junction was found to be 5.12-, 2.87-, and 1.35-fold higher as compared with Bi 2 O 3 /C 3 N 4 , C 3 N 4 /TiO 2 @C, and Bi 2 O 3 /TiO 2 @C junctions, respectively. The enhanced photocatalytic performance of BCTC hybrids could be attributed to the formation of a double Z-scheme photocatalytic system and the photosensitization of Bi 2 O 3 and C 3 N 4 . The photogenerated hole (h + ) was the primary reactive species that degraded SMZ. The plausible intermediates during the photocatalytic degradation of SMZ were identified by high-performance liquid chromatography quadrupole time-of-flight tandem mass spectrometry and the degradation pathway was postulated. Importantly, BCTC-2% had a good photocatalytic activity for degrading SMZ in natural water samples, indicating the high potential of BCTC hybrids for wastewater treatment applications.

CAS / MDL: 10035-06-0 13463-67-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2021 · IF 13.273

Metal-organic framework based nanozyme hybrid for synergistic bacterial eradication by lysozyme and light-triggered carvacrol release

Wenqian Nong,Yinglu Chen,Danyu Lv,Yitao Yan,Xi Zheng,Xianming Shi,Zhen Xu,Weiliang Guan,Jun Wu,Yongguang Guan

Pathogenic bacteria seriously endanger human health. Metal-organic framework (MOF)-enzyme composites are novel antibacterial materials for effective bacterial inactivation. In this study, we develop a MOF-based nanozyme hybrid for synergistic bacterial eradication, which integrates features of bacterial capture, magnetic assembly, lysozyme hydrolysis, and light-triggered thermal generation and carvacrol release. Core-shell nanoparticles (Fe 3 O 4 @ [email protected] 2 -MIL-88B(Fe), FPM; PVP = polyvinylpyrrolidone) are synthesized by loading PVP-modified Fe 3 O 4 to NH 2 -MIL-88B(Fe), and then covalently immobilizing lysozyme onto the FPM surface through enzymatic reaction by microbial transglutaminase. The lysozyme-covered FPM is further employed as a host matrix for loading antibacterial carvacrol to synthesize Fe 3 O 4 @ [email protected] (Fe)–NH-lysozyme/carvacrol (FPMLC) nanozyme hybrid. This FPMLC can capture bacteria by electrostatic attraction and the FPMLC-bacteria composite is then assembled by an extra magnet. The lysozyme layer can degrade peptidoglycan of the bacterial cell wall, and the released carvacrol can disrupt the bacterial cell membrane under near-infrared (NIR) irradiation. Systematic antibacterial results demonstrate that the developed FPMLC nanozyme hybrid at a low dose of 100 μg/mL completely inactivates (100%) both Escherichia coli and Staphylococcus aureus at cell density of 10 6 CFU/mL. This FPMLC exhibits high-efficiency antibacterial efficacy but no significant cytotoxicity in vitro , and therefore provides promising antibacterial applications in biomedical, environmental, and food fields.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2023 · IF 5.2

Enhanced LED light-driven antibacterial system with efficient charge transfer coordinated by Bi2WO6/TiO2 Z-scheme heterojunction

Yujia Wang,Zhigang Zhang,Yijiang Chen,Zhengfa Zhu,Hao Wang,Xiaoning Tang

Designing efficient antimicrobials for the rapid disinfection of water is increasingly critical owing to the rising threat of pathogenic microorganisms. In this study, direct Z-scheme Bi 2 WO 6 /TiO 2 heterojunctions were constructed using a simple in situ hydrothermal method. The optimal Bi 2 WO 6 /TiO 2 Z-scheme heterojunction inhibited 98.80 % of Escherichia coli (5 × 10 8  CFU mL −1 ) at 0.35 mg mL −1 and 99.33 % of Staphylococcus aureus (5 × 10 8  CFU mL −1 ) at 0.5 mg mL −1 after 10 min of light-emitting diode (LED) light irradiation. Furthermore, in antibiotic degradation experiments, Bi 2 WO 6 /TiO 2 had a 92.91 % removal rate for ciprofloxacin with a pseudo-second-order degradation rate constant ( k ) of 0.056 min −1 after 240 min of irradiation. The antibacterial mechanism of Bi 2 WO 6 /TiO 2 was systematically investigated and confirmed to occur by LED light-driven surface activation and efficient charge transfer. The surface and interfacial structures of the Bi 2 WO 6 /TiO 2 samples were studied by high-resolution transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The antibacterial mechanism was studied by controlled experiments and electron spin resonance analyses, which revealed that the primary antibacterial mechanism of Bi 2 WO 6 /TiO 2 is oxidative sterilisation via generated reactive oxygen species. Time-resolved fluorescence spectroscopy was used to analyse the charge-transfer pathway in Bi 2 WO 6 /TiO 2 , which demonstrated that the spatial separation of the redox-active sites extended the lifetimes of the photogenerated carriers, enhancing the oxidative destruction of bacteria. This comprehensive understanding paves the way for the design of new Z-type heterojunction photocatalytic materials for antimicrobial applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2023 ·Vol. 14 ·期 3 ·590-597 · IF 5

Photocatalytic production of H2O2 from wastewater under visible light by chlorine and ZnIn2S4 co-decorated TpPa-1

Guanglu Xia,Jianhao Qiu,Dingliang Dai,Yong Tang,Zhonghao Wu,Jianfeng Yao

A covalent organic framework (COF) named TpPa-1 was co-modified by chlorine grafting and ZnIn2S4 integration for concurrent photocatalytic H2O2 generation and wastewater purification under visible light. The introduction of electron-withdrawing chlorine groups on TpPa-1 decreases the density of adjacent electron clouds, which promotes the charge carrier separation and the intimate combination with ZnIn2S4 by Cl–Zn/Cl–In bonds, providing an appreciably enhanced photocatalytic activity. Specifically, in pure water, the optimal ZnIn2S4/TpPa-Cl2 sample can achieve a H2O2 yield of 766 μmol L−1, which is 1.5, 2, 7.8 and 5 times those of ZnIn2S4/TpPa-1, TpPa-Cl2, ZnIn2S4 and TpPa-1, respectively. In the tetracycline solution, 95% of tetracycline was degraded and, concomitantly, H2O2 with a yield of 846 μmol L−1 was generated. It is found that H2O2 generation undergoes a two-step O2 reduction with ·O2− as the intermediate, while ·O2−, holes and ·OH are the active species in tetracycline degradation. Likewise, other common pollutants like o-nitrophenol, acid golden yellow and acid red in wastewater could also be effectively degraded along with the appreciable production of H2O2, which realizes the so-called wastewater valorization. This study could advance COF-based photocatalysts and provide a novel insight into wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2023 · IF 8.4

Dual Z-Scheme Heterojunction SiC-Sandwiched InVO4 Nanoflowers for Boosting Visible-Light Photocatalytic CO2 Reduction with H2O

Hui Chen,Xin Yang,Min Lin,Dongmiao Li,Bing Wang,Jinni Shen,Jinlin Long,Wenxin Dai,Xuxu Wang,Zizhong Zhang

Mimicking natural photosynthesis to convert CO2 and H2O into highly valuable solar fuels is one of the ideal ways to alleviate the energy shortage and environmental pollution. However, the low mobility of photogenerated holes and sluggish H2O oxidation half reaction seriously retard the reduction efficiency of CO2 by photocatalysis. In this paper, we reported that the visible light-active SiC photocatalyst was inserted into the InVO4 nanoflower framework to form the dual Z-scheme heterojunction composited photocatalyst. The composited photocatalysts can not only neutralize the low mobility of photogenerated holes on SiC but also improve the H2O oxidation on InVO4 nanoflowers. This leads to an effective conversion of CO2 to CO without sacrificial agents under visible light irradiation as well as a good separation of photogenerated charge carriers in the composited photocatalyst for the subsequent reaction. In comparison to the parent InVO4 and SiC, the optimum CO yields over InVO4/SiC were 9.41 and 11.54 times, respectively. Under 3 h visible light irradiation, the yields of CO reach up to 142.6 μmol·g–1 and stability of O2 release over InVO4/SiC. This research offers a practical approach to developing an efficient photocatalyst for the conversion of CO2 with H2O.

CAS / MDL: 78-10-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2017 · IF 9.446

Controlled synthesis of upconverting nanoparticles/ZnxCd1-xS yolk-shell nanoparticles for efficient photocatalysis driven by NIR light

Wan-Ni Wang,Chen-Xi Huang,Chen-Yang Zhang,Meng-Li Zhao,Jun Zhang,Hua-Jian Chen,Zheng-Bao Zha,Tingting Zhao,Hai-Sheng Qian

Photocatalysts driven by near infrared light (NIR) are of great importance for making full use of solar energy and wide applications in biomedicine, biosensor, photocatalysis, and etc. In this work, we demonstrate a facile template assisted hydrothermal approach to fabricate upconversion nanoparticles (UCNPs) and Zn x Cd 1-x S yolk-shell nanoparticles, although the yolk-shell nanoparticles were made from hexagonal phase of β-NaYF 4 (NaYF 4 :Yb/Tm@NaYF 4 :Yb/Er) and II–VI semiconductor materials with a large lattice mismatch of more than 10%. The growth mechanism of the formation of yolk-shell nanostructures has been extensive investigated and the shape evolution with the time has been demonstrated. Steady and dynamic fluorescence spectra show that the as-prepared yolk-shell nanoparticles of UCNPs/Zn x Cd 1-x S can be used as efficient nanotransducer for NIR light owing to enhanced energy transfer efficiency. Interesting, the as-prepared yolk-shell nanoparticles exhibit excellent photocatalytic performance on degradation towards RhB dyes, excellent biocompatible properties and high production ability for hydroxyl radical ( OH) and single oxygen ( 1 O 2 ), which might be employed to wide applications in solar cell, hydrogen production, and photodynamic therapy related nano-biotechnology.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Analysis and Testing · 2018 ·Vol. 2 ·期 4 ·332-341 · IF 0

Size-dependent modulation of CoOOH nanoflakes light scattering for rapid and selective detection of tetracycline in milk

Wei Yin Hui,Li Xin Yu,Gao Jie,Liu Jia Jun,Yuan Dan,Yin Bin Cheng,Wang Jian

As an antibiotic, tetracycline has been widely used against bacterial infection or as feed additives for growth promotion, which may lead to the enrichment of antibiotic residues in animals or their products. Therefore, the detection of tetracycline is closely related to human health. The morphological transformation of CoOOH nanoflakes induced by tetracycline was monitored by scanning electron microscope images, dark-field light scattering images and optical spectra, which found that tetracycline could decompose CoOOH nanoflakes into small nanoparticles with low light scattering signal. As a result, the reduced light scattering of CoOOH nanoflakes was proportional to the increased concentration of tetracycline in the range of 1.0–250 μmol/L, and the limit of determination (LOD) was 0.23 μmol/L (3σ/k). Most foreign substances did not interfere in the analysis of tetracycline. Furthermore, the concentration of tetracycline in different milk samples detected with the standard addition method was so low that it accorded with the safety regulation, which was similar to the detection result with high-performance liquid chromatography (HPLC).

研究领域: 分析化学 · 纳米技术 · 食品安全 · 药物分析
✓ 已验证 产品关联 DOI
查看原文 查看 PubMed
Aggregate · 2023 · IF 18.8

Dynamic aggregation of carbon dots self-stabilizes symmetry breaking for exceptional hydrogen production with near-infrared light

Qi Zhang,Ya Zhang,Hu Shi,Hongxia Zhang,Jianghong Zhao,Zhanfeng Zheng,Hengquan Yang,Pengju Yang

Developing new photosystems that integrate broad-band near-infrared (NIR) light harvesting and efficient charge separation is a long-sought goal in the photocatalytic community. In this work, we develop a novel photochemical strategy to prepare light-active carbon dots (CDs) under room temperature and discover that the aggregation of CDs can broaden the light absorption to the NIR region due to the electronic couplings between neighboring CDs. Importantly, the dynamic non-covalent interactions within CD aggregates can stabilize symmetry breaking and thus induce large dipole moments for charge separation and transfer. Furthermore, the weak non-covalent interactions allow for flexible design of the aggregated degrees and the local electronic structures of CD aggregates, further strengthening NIR-light harvesting and charge separation efficiency. As a result, the CD aggregates achieve a record apparent quantum yield of 13.5% at 800 nm, which is one of the best-reported values for NIR-light-driven hydrogen photosynthesis to date. Moreover, we have prepared a series of different CDs and also observed that these CDs after aggregation all exhibit outstanding NIR-responsive photocatalytic hydrogen production activity, suggesting the universality of aggregation-enhanced photocatalysis. This discovery opens a new promising platform for using CD aggregates as efficient light absorbers for solar conversion.

CAS / MDL: 18497-13-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.6

Bioinspired multifunctional hydrogel actuator with rapid temperature/near-infrared light dual-stimuli responsiveness and strain-sensing capability

Rongmei Qin,Xin Deng,Haoxiang Liu,Peng Cao,Zejia Dai,Fengxuan Guo,Qiong Zhang,Jiashun Wang

In this work, a bilayer hydrogel with dual responsiveness to temperature and near-infrared (NIR) light, together with strain-sensing capability, was prepared via stepwise in situ free-radical polymerization. Upon heating or NIR irradiation, the poly (N-isopropylacrylamide- co -acrylamide) (PNAM)/Ti₃C₂T ₓ MXene active layer contracts, while the poly (acrylamide) (PAAm)/poly (vinyl alcohol) (PVA) passive layer provides flexible mechanical support and undergoes relatively limited deformation, resulting in directional bending of the bilayer hydrogel. Meanwhile, MXene serves as both the photothermal component for NIR actuation and the conductive component for real-time strain sensing. The hydrogel consists of a PNAM/MXene active layer and a PAAm/PVA passive layer, wherein MXene nanosheets provide excellent photothermal conversion capability and electrical conductivity, while the PAAm/PVA network offers favorable flexibility and mechanical support. Owing to its bilayer structure, the hydrogel exhibits favorable flexibility and stretchability, with a tensile strength of 12.5 kPa and an elongation at break of 397%. Under thermoresponsive actuation, it achieves a maximum bending rate of 12° s −1 . Under NIR irradiation, the surface temperature of the optimized hydrogel reaches 68.7 °C within 60 s. the hydrogel can also be fabricated into various shapes to realize biomimetic behaviors. In addition, it exhibits high sensitivity (GF = 3.28) and excellent cyclic stability. Therefore, the PNAM/MXene//PAAm/PVA hydrogel developed in this study represents a multifunctional soft material with potential applications in intelligent soft actuators, wearable sensors, and human–machine interfaces Download: Download high-res image (196KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。