DESALINATION
·
2024
·
IF 8.3
Guanhua Wang,Huibin Zhang,Weilun Qian,Anyang Tang,Huazhen Cao,Wenyu Feng,Guoqu Zheng
In this study, a spherogranular porous composite tin pyrophosphate antimonate (SSbPP) adsorbent was developed for the efficient extraction of rubidium (Rb) and cesium (Cs) resources. This granular composite adsorbent was prepared using the anti-solvent method with polyvinyl chloride (PVC) as carrier and the incorporated SSbPP powder as adsorbent. The composition , molecular structure, and adsorption performance of SSbPP, along with the microstructure and adsorption behavior of the granulated PVC-SSbPP adsorbent, were comprehensively investigated. The results showed that the SSbPP adsorbent with superior performance was synthesized at a Sn:Sb:P molar ratio of 0.5:0.25:2. The adsorption behavior of PVC-SSbPP was evaluated using the pseudo-second-order kinetic model and Langmuir isotherm. The maximal adsorption capacities of PVC-SSbPP for Rb + and Cs + were found to be 81.3 mg g −1 and 95.23 mg g −1 at optimal condition, respectively. The PVC-SSbPP also exhibited high adsorption selectivity for Rb + /Cs + in the presence of competitive metal ions such as K + , Na + , Li + , Mg 2+ and Ca 2+ . Furthermore, through dynamic adsorption-desorption experiment using a fixed-bed column, a low-concentration Rb + /Cs + solution (10 mg L −1 ) could be concentrated by approximately 140 times. This research offers a promising approach for the selective extraction of low-concentration Rb and Cs resources from highly saline solutions.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yu Zang,Yangyang Yu,Yanlin Chen,Minyi Fan,Jianjun Wang,Jiao Liu,Liang Xu,Hongge Jia,Shaobo Dong
Conjugated microporous polymers (CMPs) with extended π-conjugated systems and permanent microporous scaffolders have broad application prospects in the treatment of radionuclides in nuclear wastewater. Herein, the Sonogashira–Hagihara coupling process was employed to generate three CMPs, called CMP1–3 . CMP1S–3S with different degrees of sulfonation were produced and employed for Cs + ion adsorption by adjusting the sulfonation time using chlorosulfonic acid as the sulfonating agent. This is the first attempt to apply CMPs containing sulfonic acid groups to Cs + ion adsorption, which show excellent adsorption properties. CMP1S - 48 with the highest surface sulfonic acid group density exhibited the fastest adsorption rate, and it reached adsorption equilibrium on Cs + ion in an aqueous solution under 1 min. The adsorption process corresponded to the Freundlich isotherm model of multilayer adsorption, with an adsorption capacity of up to 288.1 mg g −1 . Compare with CMP2S - 48 and CMP3S - 48 , CMP1S - 48 with more sulfonic acid groups shows the highest adsorption capacity. Moreover, the selectivity of CMP1S - 48 adsorbing Cs + ion was exceeded high. Notably, the adsorption mechanism of Cs + ion by CMP1S–3S involved ion exchange with H + in the sulfonic acid groups, as well as its complexation and electrostatic attraction with the sulfonic acid groups. This work opens up a new way for CMPs rich in sulfonic acid groups to treat Cs + ion-contaminated water sources.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chunxiao Jin,Pan Gao,Shuwei Zhou,Yuxue Yue,Saisai Wang,Renqin Chang,Cuiyu Li,Tulai Sun,Songpei Zhang,Yihui Cai,Yihan Zhu,Jia Zhao,Xiaonian Li
Alloying and phase separation of multimetallic catalysts induced by external environments are common phenomena. Understanding the structure–activity relationship of the deactivation process is crucial for tailoring highly stable active sites. Herein, characterization and long-term evaluation found that there are two main reasons for the deactivation of CuNi catalysts in acetylene selective hydrogenation: (1) Metal Ni segregation; (2) Carbon deposit. Inspired by this, we uses the high mixing entropy of multiple metals to induce the formation of CuNiCs amorphous clusters (ACs) with uniform size and dispersion. And electron transfer between Ni sites and adjacent sites (Cs and Cu) forms a rich electron-rich Ni sites which effectively reduces the adsorption difference energy of acetylene and ethylene on the catalysts surface. And E ads (C 2 H 2 )-E ads (C 2 H 4 ) can be used as a descriptor for ethylene selectivity. Finally, CuNiCs/TiO 2 ACs catalysts achieved the acetylene conversion of 99.1 % and the ethylene selectivity of 92.1 % at 180 °C, and showed no signs of deactivation after 110 h long-term evaluation.
✓ 已验证
产品关联
DOI
高影响因子
Inorganic Chemistry Frontiers
·
2024
·
IF 6.1
Kai-Yao Wang,Meng-Yu Li,Lin Cheng,Xin Hao,Cheng Wang
Long-lived 137Cs/134Cs, 60Co, and 63Ni with high-energy β/γ emissions are primary toxic fission/activation products in nuclear-contaminated water, causing irreversible damage to the ecological environment and human health. Rapid remediation of these radionuclides emerges as an urgent task, while the deficiencies in adsorption kinetics, selectivity and acid resistance hinder the material innovation for practical applications. Herein, we have developed a hybrid cadmium/tin selenide adsorbent K3.4(CH3NH3)0.45(NH4)0.15Cd2Sn3Se10·3.4H2O (CdSnSe-2K) for the enrichment and sequestration of Cs+, Co2+, and Ni2+ ions. CdSnSe-2K features a unique open-framework constructed from the interlinkage of T2-{M4Se10} (M = SnIV/CdII) supertetrahedral clusters and M bridges, accelerating the ion transfer in the tunnel system and thus affording quick kinetics (k2 = 9.706, 0.182, 0.099 g mg−1 min−1 for Cs+, Co2+, Ni2+). Remarkably, the removal rate RCs increases to 98.54% in just 2 min and 99.57% in 5 min (equilibrium), which is responsible for an ultra-high distribution coefficient Kd of 2.31 × 105 mL g−1. The soft-Lewis basic Se component endows CdSnSe-2K with a fantastic adsorption selectivity for Cs+, Co2+, and Ni2+ against various coexisting cations and anions in complex actual water environments even including the highly salty sea water medium. CdSnSe-2K exhibits a fantastic acid/base tolerance over pH = 2–13, and the maximum adsorption capacities qCsm, qCom and qNim under neutral condition are 218.08 ± 80.08, 43.95 ± 16.57 and 42.53 ± 16.50 mg g−1, respectively. In addition, CdSnSe-2K single crystals were also employed as the stationary phase for the fabrication of an ion exchange column, which shows an elimination efficiency above 99% in the long-term filtration for Cs+ (8200 BVs), Co2+ (4000 BVs) and Ni2+ (4000 BVs). This work not only highlights CdSnSe-2K as a promising Cs+, Co2+, and Ni2+ scavenger in radionuclide remediation, but also provides a supertetrahedral cluster-based construction strategy for open-framework selenide materials with enhanced adsorption kinetics, selectivity, and acid resistance.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2025
·
IF 6.7
Rong Liu,Luyao Yang,Meiying Xie,Fan Yang
The effective separation of coexisting 90 Sr 2+ and 137 Cs + in nuclear wastewater has been a persistent critical issue for water purification and recovery of valuable radioactive materials. In this study, a new monolayer amide modified graphene solid-phase adsorbent material, aminographene-aminocarbonylmethylglycine (AGO-AMG), with specific selectivity was developed to separate Sr 2+ from Cs + . At pH = 12, the simulated separation process of radioactive 90 Sr 2+ from 137 Cs + via AGO-AMG resulted in the highest separation factor ( β Sr/Cs ) = 2982; this value was the largest β Sr/Cs reported in the literature. The adsorption behavior was evaluated through the Langmuir and Freundlich isotherm models, demonstrating a maximum adsorption capacity of 421.94 mg/g for Sr ions. Adsorption elution recirculation experiments were used to examine the separation effect of AGO-AMG, and the results from these experiments confirmed its stable recycling ability. In addition, at ultralow concentrations of 30 ppb of Sr 2+ and Cs + , the removal rate of Sr 2+ remained at approximately 90%, indicating that AGO-AMG had good working ability at ultralow concentrations. Furthermore, the rapid separation capacity of the three-dimensional AGO-AMG films showed that the removal rate of the AGO-AMG films for Sr 2+ could be maintained between 97% and 99% when a syringe was used to add the feed solution at a rate of 4 mL/min and a pH = 12. Therefore, AGO-AMG could be considered a new and efficient solid-phase adsorbent material for the effective separation of 90 Sr 2+ from 137 Cs + in seawater after the discharge of nuclear contaminated water and has industrial application potential.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2024
·
IF 3.3
Heng Guo
Low-dimensional metal halides, which possess efficient luminescent properties, have garnered significant interest in the fields of optoelectronics and radiation detection. This study introduces novel lead-free silver-based metal halide material, CsAgCl 2 microcrystals (MCs). These MCs have a one-dimensional atomic chain structure and a unique [AgCl 5 ] 4- tetragonal shared triangular configuration. CsAgCl 2 MCs exhibit excellent performance as X-ray scintillators due to their bright broadband yellow emission and fast decay time in the microsecond range. The large Stokes shift of 350 nm is produced by self-trapped exciton emission. In X-ray scintillation applications, CsAgCl 2 MCs demonstrate a high light yield of 13280 photons/MeV and a wide range of linear scintillation response. It is noteworthy that the CsAgCl 2 MCs maintain good stability under both atmospheric conditions and continuous X-ray irradiation. The sample was used in an X-ray imaging screen, which clearly presented the X-ray projection image of a wooden stick. As a result, this research not only contributes to the collection of lead-free metal halide scintillators but also indicates that CsAgCl 2 MCs have a wide range of future applications and potential in areas such as medical imaging, scientific research, and diagnostic and detection technologies.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Can Liu,Xinru Li,Haojie Ge,Xiaoping Yu,Yafei Guo,Tianlong Deng
The extreme pH and complex composition of radioactive wastewater pose great challenges to the chemical stability and properties of adsorbents. Herein, three kinds of metal-doped tin sulfides were developed by a simple one-pot method for cesium removal. DFT calculations combined with experiments were conducted to reveal their structures, stability, and adsorption properties. It was found that the crystal structures of tin sulfide became more stable after doping by Ni and Al. Particularly, the Al-doped material (NAlSS) exhibited the highest stability and adsorption performance because of the highest −COHP value of the Sn-S bond in NAlSS and the low binding energy between NAlSS and Cs + . The industrial application of the powdery NAlSS was further solved by wet spinning using glutaraldehyde cross-linked sodium alginate and hydroxyethyl cellulose (SHG) as the supporters. The obtained salt-resistant hydrogel fibers (SHG-NAlSS) exhibited excellent adsorption performance and stability in wide pH (2 ∼ 12) and temperature (298.15 ∼ 328.15 K) ranges. The maximum adsorption capacity reached 401.34 mg·g −1 within 10 min. The material was successfully applied for Cs + removal from wastewater, and the distribution coefficient of Cs + reached 255020.33 mL·g −1 . After 10 adsorption–desorption cycles, the adsorbent maintained good stability. These results, along with the fixed-bed adsorption, demonstrate that the developed material can be used as a candidate for Cs + removal from radioactive wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2024
·
IF 8.9
Jiaqi Sun,Zuoshu Wang,Jie Zhang,Dewei Wang
Aqueous zinc‑iodine batteries are favorable solutions for grid-level energy storage owing to their cost-effective components and intrinsic safety. Nevertheless, the sluggish conversion kinetics and polyiodide shuttle effect have significantly hindered their practical applications. Herein, a Co single atom anchored on N-doped porous carbon nanosheets (Co-SAs@NPC) was produced through an efficient molten-salt engaged pyrolysis process and further utilized as the iodine host for aqueous zinc-iodine batteries. The large specific surface area (1741 m 2 g −1 ) combined with abundant heteroatom-containing functional groups can afford a tight physical and chemical confinement towards iodine species. Meanwhile, the presence of Co single atoms exhibits high electrocatalytic activity towards I 2 reduction reactions. According to the experimental results and DFT theoretical calculations, the resulting Co-SAs@NPC can simultaneously offer generous electrochemical active sites and electrocatalytic activity, which displays a high adsorption ability towards iodide species and boost the reversible redox reactions between iodine and iodides. Consequently, the as-assembled zinc-iodine batteries with Co-SAs@NPC/I 2 cathodes can deliver a high specific capacity (295 mA h g −1 at 0.3 A g −1 ), good rate performance (199 mAh g −1 at 20 A g −1 ), and long cyclic stability over 10,000 cycles. Additionally, the absence of polyiodide shuttle was analyzed by a series of ex-situ spectrum analyses.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Xin Tong,Hongquan Yu,Xiangping Li,Sai Xu,Baojiu Chen
Owing to their environmental friendliness, structural tunability, and ability to emit self-trapped excitons, lead-free halide double perovskites (DPs) have demonstrated significant potential for applications in light-emitting diodes (LEDs) and photodetectors. However, their chemical and thermal stability is generally insufficient. These limitations hinder their practical application in LEDs, as these devices typically generate considerable heat under high operating currents and prolonged usage, particularly in the case of infrared LEDs. In this work, Er 3+ -doped double perovskites (Cs 2 NaYCl 6 and the Cs 2 NaYCl 6 @0.6 KBr composite) were synthesized via a hydrothermal method. The emission intensity of Cs 2 NaYCl 6 :2 % Er 3+ @0.6 KBr is five times greater than that of Cs 2 NaYCl 6 :2 % Er 3+ within the wavelength range of 1400–1600 nm. In the Cs 2 NaYCl 6 :Er 3+ @0.6 KBr composite, the surface defects of Cs 2 NaYCl 6 :Er 3+ were modified by the introduction of KBr, leading to an increase in the external quantum efficiency (EQE) of Cs 2 NaYCl 6 :Er 3+ from 9.5 % to 30.0 %. Under a 150 mA working current, the operating temperatures of the near-infrared (NIR) LED devices based on the Cs 2 NaYCl 6 :2 %Er 3+ and Cs 2 NaYCl 6 :2 %Er 3+ @0.6 KBr composite are 53.2 and 47.4 °C, respectively. After working for 2 h, the temperatures of the NIR LEDs based on Cs 2 NaYCl 6 :2 %Er 3+ and Cs 2 NaYCl 6 :2 %Er 3+ @0.6 KBr were 60.3 °C and 46.0 °C, respectively, under a 100 mA operating current.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Yu-Jie Zhang,Lin Cheng,Ze-Yu Wang,Ze-Jia Shen,Fei-Fei Wang,Jun-Zheng Wang,Zi-Xin Qiu,Shuaihua Wang,Kai-Yao Wang,Cheng Wang
A porous layered tin sulfide material, [(CH3)2NH2]2Sn3S7·0.4H2O (SnS-1), is developed for rapid Cs+ and Sr2+ removal from aqueous solutions. The alignment of hexagonal windows (8.3 × 8.3 Å2 in cross-section) across the stacked layers forms straight pseudochannels that enables effective ion diffusion and accommodation. SnS-1 exhibits outstanding ion exchange kinetics (k2Cs = 0.256 g mg–1 min–1; k2Sr = 0.272 g mg–1 min–1) and capacities (qmCs = 417.24 mg g–1; qmSr = 116.18 mg g–1), exceeding most chalcogenide-based exchangers. It exhibits acid–base resistance across a broad pH range (0–11) and remarkable selectivity for Cs+ and Sr2+ over various competing ions. Dynamic column filtration confirms the separation applicability of SnS-1, featuring sustained Sr2+ removal (RSr = 94.45–99.51%) against Cs+ (RCs = −20 ± 5%). The SnS-1/PTFE composite membrane can efficiently remove Cs+ and Sr2+ from continuous flow (2.0 mL min–1 cm–2), with removal efficiencies exceeding 91.71 and 98.91%, respectively. Moreover, the adsorbed Cs+ and Sr2+ ions can be readily eluted from the spent column and membrane using a 2 M NaCl solution. Combined with simple synthesis, radiolytic stability, and superior performance, microporous SnS-1 emerges as a promising candidate for nuclear wastewater remediation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICAL MATERIALS
·
2025
·
IF 4.2
Yanzhu Wang,Yanting Liu,Siqi Sheng,Qiumei Li,Lili Meng,Hua Yao,Qian Chen,Jieni Meng
The rare-earth based double perovskites (DPs) can effectively solve the poor controllability of lanthanide ions (Ln 3+ ) doping concentrations in traditional double perovskites. In this study, we reshape the UV excitability of Er 3+ by constructing an energy transfer (ET) channel from STE to Er 3+ in the rare-earth based Cs 2 NaGdCl 6 DPs, achieving efficient green emission with the photoluminescence quantum yield (PLQY) of 82.78 %. Excitingly, high-sensitivity temperature measurement within the temperature range of 303–430K is achieved based on the fluorescence intensity ratio (FIR). The maximum relative sensitivities S R (I 526 nm /I 552 nm ) and S R (I 526 nm /I 460 nm ) of Cs 2 NaGd 0.965 Cl 6 : 0.005Sb 3+ , 0.03Er 3+ reach 1.11 % K −1 and 0.90 % K −1 , respectively, indicating that Cs 2 NaGd 0.965 Cl 6 : 0.005Sb 3+ , 0.03Er 3+ is promising optical temperature sensing material. Furthermore, a white light-emitting diode (WLED) device was fabricated using Cs 2 NaGd 0.965 Cl 6 : 0.005Sb 3+ , 0.03Er 3+ and commercial red phosphor CaAlSiN 3 : Eu 2+ with a 365 nm chip, which exhibited a color rendering index (CRI) of 95.1, a correlated color temperature (CCT) of 4989 K, and CIE coordinates of (0.3443, 0.3397). This work broadens the application of rare-earth based Cs 2 NaGdCl 6 DPs.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Linjie Tong,Jialiang Jiang,Hui Xie,Yang Yang,Jialong Zhao,Kan Li,Zhentao Du,Weiyou Yang,Hui Fu,Xiyong Chen,Jinju Zheng
Rare-earth-based double perovskites (DPs) are emerging as promising candidates for next-generation optoelectronic materials, due to their intrinsic non-toxicity, excellent stability, as well as tunable optical properties. However, the unavoidable use of environmentally hazardous reagents in material synthesis and their typically low luminescence efficiency caused by forbidden transitions have significantly hindered commercial applications. Herein, green, water-assisted strategy has been developed for the mass production of pure rare-earth-based DPs with enhanced optical properties. The synthesized Cs 2 NaTbCl 6 DP microcrystals (MCs) exhibit strong Tb 3+ emissions, achieving a near-unity photoluminescence quantum yield (PLQY) of 98 %. Additionally, they demonstrate excellent stability, maintaining stable PL for over 500 h at 150 °C. It is verified that the introduced water could promote the ion migration, thus enhancing the reaction conversion with boosted luminescence efficiency. Additionally, other typical Cs 2 NaLnCl 6 DPs (Ln = Nd, Eu, Dy, Ho, Er, Tm, Yb) have been facilely synthesized by the present water-assisted strategy, representing the universality of our rapid and environmentally-friendly route for scalable fabrication of rare-earth-based DPs, and the capacity for unlocking full-spectrum emission from visible to near-infrared ranges. Impressively, the obtained DPs demonstrate the great potential in nighttime and medical imaging, as well as anti-counterfeiting applications, underscoring their broad applicability in optoelectronic and biomedical devices.
✓ 已验证
产品关联
DOI
高影响因子