JOURNAL OF POLYMER SCIENCE
·
2023
·Vol. 61
·期 18
·2103-2114
·
IF 3.4
Yihua Cui,Jinhua Gao,Shiping Lin,Weitian Chen,Jianwei Guo
Emulsion polymerization was used to create composites of polyaniline-amino-carbon nanotubes (PANI-A-CNT). Fourier transform infrared spectroscopy (FT-IR) was used to examine the chemical bonding properties of PANI and carbon nanotubes in composite materials. Transmission electron microscopy (TEM) was used to confirm that the PANI layer on the core-shell structure of PANI-A-CNT material was nanoscale in size. In order to assess the impact of various carbon nanotube contents on the electrostatic and mechanical properties of the composites, pristine carbon nanotube/ABS (p-CNT/ABS) and PANI-A-CNT/ABS composites were prepared. The mass fractions of PANI and CNT in PANI-A-CNT were 93.7 and 6.3 wt%, respectively, according to thermogravimetric analysis (TGA); hence, 4 wt% of PANI-A-CNT included 0.3 wt% CNT and 3.7 wt% PANI. The surface resistance test revealed that the PANI-A-CNT/ABS composite with 4 wt% PANI-A-CNT has a surface resistance of 10 8 Ω, which is one time less than the surface resistance of the p-CNT/ABS composite with 4 wt% p-CNT. Moreover, PANI-A-CNT/ABS composite (0–4 wt% PANI-A-CNT) has stronger tensile and impact properties than p-CNT/ABS composite (0–4 wt% p-CNT), expanding the range of applications for ABS resin. Graphical
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2023
·
IF 6.4
Lili Luo,Xiaohong Wang,Siyu Yang,Juguo Dai,Dongxu Li,Long Xia,Cheng Chi,Andreu Cabot,Yiting Xu,Lizong Dai
While asymmetric supercapacitors (ASCs) have huge potential as efficient, durable, and cost-effective energy storage devices, they fail to meet expectations because of the unoptimized architecture and composition of their electrode materials. Herein, PPy/PANI@MoS2 (PPMS) ternary composites with a dual-channel structure are obtained by facile hydrothermal and in situ polymerization methods. These dual conductive channels synergistically improve the electrode’s electrical conductivity, facilitate ion diffusion, enlarge the interlayer distance, and increase the accessible surface area. Taking advantage of such a favorable architecture, PPMS composites exhibit outstanding electrochemical properties, including a huge specific capacitance (1171 F g–1 at 1 A g–1) and rate capability (861 F g–1 at 20 A g–1) in three-electrode systems. Based on charge storage mechanism analyses, we demonstrate that the kinetic behavior of PPMS electrodes is dominated by the surface capacitance (95.9% at 100 mV s–1). Besides, PPMS-based ASCs (PPMS//activated carbon) operate in a broad voltage window (1.8 V), delivering an ultrahigh energy density of 93.4 Wh kg–1 at a power density of 884.8 W kg–1. They also show a superior cycling stability of 90.4% and a remarkable Coulombic efficiency of 99.2% for 10,000 cycles. This work affords an inspiration for rational structural optimization of PANI-based electrode materials with great prospects in the development of next-generation high energy density ASCs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Boyang Zhou,Zhifang Li,Deyu Qin,Qian Zhang,Miao Yu,Changlong Yang
Polyaniline (PANI) has been widely studied because of its unique physicochemical properties, but its practical significance in supercapacitors is seriously affected by its structural collapse during charging and discharging. We have successfully synthesized transition metal oxide/carbon-polyaniline composite electrode materials by in situ growth of polyaniline using the electrodeposition method with a metal-organic skeleton as a sacrificial template. This method not only can obtain high capacitance materials but also carbon materials provide buffer space during long-term charge/discharge to improve the overall stability. ZnCoO x /C-PANI-3 has a smaller charge transfer resistance and solution resistance compared to other materials, indicating that the interfacial coupling between PANI and ZnCoO x /C shortens the ion transport path between electrolyte and electrode surface, which is beneficial for rapid ion transfer and thus enhances its electrochemical performance. ZnCoO x /C-PANI-3 as an electrode material in the three-electrode system, has remarkable specific capacitance (1055 F . g −1 at a current density of 1 A . g −1 ) and good cycling stability (85.7% capacitance retention after 10,000 cycles of charge and discharge at high current density). Similarly, the asymmetric supercapacitor (ZnCoO x /C-PANI-3//AC) assembled with ZnCoO x /C-PANI-3 as the positive electrode material and activated carbon as the negative electrode material has a maximum energy density of 42.77 Wh . kg −1 at a power density of 705 W . kg −1 and a remarkable cycle life with a capacitance retention rate of 80% after 5000 cycles. This research opens up new avenues for studying polyaniline/MOF derivatives (transition metal oxide-carbon) composites.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2023
·
IF 11.4
Zhigao Zhu,Zhu Liu,Guangming Tan,Junwen Qi,Yujun Zhou,Jiansheng Li
Hypersaline wastewater treatment using membrane distillation (MD) has gained significant attention due to its ability to completely reject nonvolatile substances. However, a critical limitation of current MD membranes is their inability to intercept volatile substances owing to their large membrane pores. Additionally, the strong interaction between volatile substances and MD membranes underwater tends to cause membrane wetting. To overcome these challenges, we developed a dual-layer thin film composite (TFC) Janus membrane through electrospinning and sequential interfacial polymerization of a polyamide (PA) layer and cross-linking a polyvinyl alcohol/polyacrylic acid (PP) layer. The resulting Janus membrane exhibited high flux (>27 L m–2 h–1), salt rejection of ∼100%, phenol rejection of ∼90%, and excellent resistance to wetting and fouling. The interlayered interface between the PA and PP layer allowed the sieve of volatile substances by limiting their dissolution–diffusion, with the increasing hydrogen bond network formation preventing their transport. In contrast, small water molecules with powerful dynamics were permeable through the TFC membrane. Both experimental and molecular dynamics simulation results elucidated the sieving mechanism. Our findings demonstrate that this type of TFC Janus membrane can serve as a novel strategy to design next-generation MD membranes against volatile and non-volatile contaminants, which can have significant implications in the treatment of complex hypersaline wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MACROMOLECULES
·
2023
·
IF 5.5
Nan Li,Shengfu Yang,Kan Zhang
The future development of benzoxazine thermosetting resins as advanced polymeric materials depends on designing more attractive chemical structures and reaching a deeper understanding of the structure–property relationship at the molecular level. Herein, we synthesized a new series of benzoxazines containing the thiophenecarboxamide or thiopheneacetamide functionality at the ortho- and para-positions with respect to oxygen in the oxazine ring. Successful syntheses of thiophene-rich benzoxazine monomers and their corresponding molecular characterizations were confirmed by Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR), and high-resolution mass spectroscopy. Ring-opening polymerization processes of benzoxazines and thermal properties of their resulting polybenzoxazines were studied by differential scanning calorimetry, in situ FT-IR spectroscopy, and thermogravimetric analysis. In addition, a combined experimental and computational study using both 1D and 2D NMR as well as density functional theory calculations provided kinetic insights into the effects of structural and hydrogen bonding on the polymerization mechanism. With the designed varieties of hydrogen bonds in these novel benzoxazines, it has been found that oxygen in the oxazine ring involved in stronger hydrogen bonding can generate a relatively weaker O–CH2 bond, leading to the reduced ring-opening polymerization temperature. The fundamental investigations presented in the current work provide us a deeper understanding of the hydrogen bonding interaction in benzoxazine as well as its role in polymerization behavior. Moreover, these newly obtained thiophene-rich benzoxazines also give us ample opportunities to develop high-performance polybenzoxazine thermosets with promising applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Yukai Chen,Ruizhe Wang,Ling Zhou,Rulin Dong,Jiahui Kou,Chunhua Lu
Hindering the recombination of photoinduced electron-hole pairs is of significance for enhancing photocatalytic performance. Applying a voltage to separate carriers offers an option to realize it. Thermoelectric materials own the ability to continuously sustain a voltage when a temperature difference exists between its two sides. However, maintaining the thermoelectric effect without wasting additional energy remains a challenge. Herein, a C 3 N 4 /Polyaniline/Poly(vinylidene fluoride) cilia array was fabricated to reach efficient photocatalysis through thermoelectric effect and photothermal effect. The cilia array structure offers more than 40% of light absorbance compared to the film. Hence, the infrared light in sunlight, which was usually omitted in photocatalysis, was transformed into heat. Through the unique design which draws upon the huge difference in thermal conductivity of air and water, a temperature gap was formed between the top and bottom sides of the cilia array by half-submerging it in water. Therefore, the photocatalytic efficiency was improved by 84.4%. This work achieves an energy-saving method to enhance photocatalytic performance by activating thermoelectric effect through infrared light, shedding light on the application of multi-modes enhanced photocatalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2023
·Vol. 140
·期 42
·e54547
·
IF 3
Jilei Xu,Ping Chen,Shuaijiang Ma,Guohao Zhu
In this study, two types of ortho -oxazine functionalized bismaleimides with exceptional thermal properties and solubility were synthesized. The excellent solubility in many solvents is attributed to the stable twisted structure of the monomer. The monomer containing the cyano group showed enhanced solubility. It was found that the curing mode of ortho -oxazine functionalized bismaleimide was autocatalytically cured. In situ FT-IR spectroscopic studies indicated that the structure of bismaleimide resin undergoes a structural transformation at higher temperatures to form benzoxazole resin with enhanced thermal stability. The carbon residue rates of bismaleimide and benzoxazole resins at 800°C were 69% and 77%, respectively. The new bismaleimide and benzoxazole resins were analyzed using Microscale Combustion Calorimeter (MCC), and it was found that they also possess excellent flame-retardant properties, specifically benzoxazole resin.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2023
·Vol. 140
·期 39
·e54460
·
IF 3
Yanyan Zheng,Chongyi Chi,Denglong Chen,Tuer Zeng,Yuxia Zhang,Xiaoyu Lu,Qinhui Chen
The filled sheet-like inorganic materials can usually improve the anticorrosion performance of the coating. Herein, the Janus nanosheets (JNSs) with two-dimensional structure were prepared by phase separation method, modified by polyaniline (PANI) on the amino side of JNSs and composited with epoxy resin (EP). Scanning electron microscope (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG) were used to characterize the morphology and chemical structure of JNSs and PANI@JNSs. The anti-corrosion performance of coatings was measured by electrochemical impedance spectroscopy (EIS) and salt spray experiment. Compared with pure EP, the |Z| 0.01Hz of 0.5%-JNSs/EP coating and that of 0.5%-PANI@JNSs/EP coating reached 5.6 × 10 8 and 5.4× 10 10 Ω·cm 2 after immersed for 35 days, nearly 2 and 4 orders of magnitude higher than pure EP respectively. The excellent anti-corrosion performance of 0.5%-PANI@JNSs/EP coating is due to the synergistic effect of physical barrier effect of PANI@JNSs, interfacial interaction between PANI@JNSs and epoxy resin and passivation effect of PANI. Moreover, PANI@JNSs possess both strengthening and toughening effects on composite coating. Janus nanosheets provide a new idea and method for preparing high-performance anticorrosive materials.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY
·
2023
·
IF 9
Yongcun Liu,Wenye Zhang,Xiaoxiang Su,Wenjie He,Jia Yang,Gang Qin,Xiang Yu,Qiang Chen
Flexible supercapacitor is an important energy supply source for wearable electronic devices. Herein, an integrated supercapacitor with exceptional electrochemical performance is successfully constructed based on a novel dual redox-mediated double network (DN) gel polymer electrolyte (GPE). Thanks to the synergistic effect of DN structure and multiple physical interactions (hydrophobic association, hydrogen bond and ionic coordination), the polyacrylic acid/lauryl methacrylate/sodium carboxymethyl cellulose/H 2 SO 4 /CuSO 4 _FeSO 4 GPE possesses exceptional mechanical properties and rapid self-healing ability. In addition to being ionic cross-linking agents, CuSO 4 _FeSO 4 can also serve as carrier donors and anti-freezing agents, endowing the GPE with excellent conductivity (0.17 S/cm) and low temperature adaptability. The GPE-based integrated supercapacitor demonstrates an outstanding specific capacitance of 414.96 mF/cm 2 and a high energy density of 84.21 μWh/cm 2 , benefiting from redox reactions of Cu 2+ /Cu + and Fe 2+ /Fe 3+ at the electrode/electrolyte interface. Due to the seamless gradient structure, the interfacial resistance is reduced and the relative slippage is overcome, resulting in splendid capacitance retention of the supercapacitor under various mechanical deformations . Moreover, the device demonstrates promising self-healing ability even at −20 °C. This work provides a novel strategy for designing and fabricating the supercapacitor with self-healing, arbitrary deformability and anti-freezing in next-generation electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2023
·
IF 5
Zhongxi Miao,Chaohua Peng,Long Xia,Hui Xu,Siyuan He,Cheng Chi,Jiahui Zhong,Shuchuan Wang,Weiang Luo,Guorong Chen,Birong Zeng,Lizong Dai
Currently, because of the depletion of petroleum resources and pollution problems associated with the use of petrochemicals, bio-based epoxy thermosets have received wide attention. However, epoxy thermosets derived entirely from bio-based raw materials combining high performances in mechanical properties, fire resistance, and degradation are less reported. In this work, a fully bio-based Schiff base epoxy resin named VA-FA-EP is prepared from vanillin (VA) and 2-furfurylamine (FA). The curing kinetics and behavior of the imine exchange reaction are explored systematically. After being cured by 4,4′-diaminodiphenylmethane (DDM), VA-FA-EP/DDM exhibits excellent mechanical properties with a glass transition temperature of 200.1 °C. VA-FA-EP/DDM has also been proven to have good fire resistance. There are significant reductions of 66.73% and 81.72% in total heat release (THR) and total smoke production (TSP), respectively. The intrinsic flame-retardant mechanism is systematically illustrated. In addition, the VA-FA-EP/DDM has also shown a good degradation property. In summary, this study offers a viable approach for producing eco-friendly fire-safe Schiff base epoxy thermosets utilizing entirely sustainable raw materials.
✓ 已验证
产品关联
DOI
高影响因子
Batteries-Basel
·
2023
·Vol. 9
·期 6
·304
·
IF 4
Ruixue Liu,Wenkang Liu,Jichao Chen,Xiangli Bian,Kaiqi Fan,Junhong Zhao,Xiaojing Zhang
Ionic conductive hydrogels with good conductivity and biocompatibility have become one of the research highlights in the field of wearable flexible sensors and supercapacitors. In this work, poly(methacrylic acid–methyl methacrylate)-reinforced poly(sodium acrylate–vinyl phosphonic acid) composite hydrogels (P(AAS-VPA)/PMMS) were designed and tested for strain sensor or supercapacitor applications. The results showed recoverability for 20 cycles of tension and compression experiments, an excellent breaking strain of 2079%, and ionic conductivity of 0.045 S·cm−1, demonstrating strong support for the application of the P(AAS-VPA)/PMMS hydrogel in strain sensors and supercapacitors. The composite hydrogel exhibited outstanding sensing and monitoring capability with high sensitivity (GF = 4.0). The supercapacitor based on the P(AAS-VPA)/PMMS composite hydrogel showed excellent capacitance performance (area capacitance 100.8 mF·cm−2and energy density 8.96 μWh·cm−2) at ambient temperature and even −30 °C (25.3 mF·cm−2and 2.25 μWh·cm−2). The hydrogel has stable electrochemical stability (1000 cycles, Coulomb efficiency > 97%) and exhibits electrochemical properties similar to those in the normal state under different deformations. The excellent results demonstrate the great potential of the P(AAS-VPA)/PMMS composite hydrogel in the field of strain sensors and flexible supercapacitors.Keywords:supercapacitors;latex particles;sensitivity;capacitance performance
✓ 已验证
产品关联
DOI
高影响因子
Advanced Composites and Hybrid Materials
·
2023
·Vol. 6
·期 3
·1-12
·
IF 20.1
Miao Baoji,Arsalan Muhammad,BaQais Amal,Murugadoss Vignesh,Saddique Imran,Amin Mohammed A.,Ren Junna,Awais Azka,Zhu Qingsong,Xu Ben Bin,Wei Fengchun
The tetrametallic PtNiCuCo alloy nanoparticles were prepared by a simple and cost-effective solution-based approach and spray deposited on fluorine-doped tin oxide (FTO) substrates to use as a highly sensitive catalyst for hydrogen peroxide (H 2 O 2 ) sensing. The morphological studies revealed that the PtNiCuCo nanoparticles had an average particle size of 5 ± 1 nm. Electrochemical studies showed that PtNiCuCo nanoparticles possess excellent electro-oxidation activity for hydrogen peroxide at 20 mVs −1 scanning rate (vs Ag/AgCl). The wide linear range for hydrogen peroxide (H 2 O 2 ) was obtained from 10μM to 16 mM. The detection limits for H 2 O 2 were 0.16 μM (SNR = 3). The sensitivity of H 2 O 2 was 4367.25 µAmM −1 cm −2 . These results revealed that the prepared nanoparticles could be a potential candidate for H 2 O 2 sensing.
✓ 已验证
产品关联
DOI
高影响因子