ANALYTICAL CHEMISTRY
·
2022
·
IF 8.008
Liuying He,Xiao Wang,Junyu Chen,Yuze Li,Liping Wang,Caiqiao Xiong,Zongxiu Nie
Liver cancer (LC) is the third frequent cause of death worldwide, so early diagnosis of liver cancer patients is crucial for disease management. Herein, we applied NH2-coated polystyrene@Fe3O4 magnetic beads (PS@Fe3O4–NH2 MBs) as a matrix material in laser desorption/ionization mass spectrometry (LDI-MS). Rapid, sensitive, and selective metabolic profiling of the native biofluids was achieved without any inconvenient enrichment or purification. Then, based on the selected m/z features, LC patients were discriminated from healthy controls (HCs) by machine learning, with the high area under the curve (AUC) values for urine and serum assessments (0.962 and 0.935). Moreover, initial-diagnosed and subsequent-visited LC patients were also differentiated, which indicates potential applications of this method in early diagnosis. Furthermore, among these identified compounds by FT-ICR MS, the expression level of some metabolites changed from HCs to LCs, including 29 and 12 characteristic metabolites in human urine and serum samples, respectively. These results suggest that PS@Fe3O4–NH2 MBs-assisted LDI-MS coupled with machine learning is feasible for LC clinical diagnosis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2021
·
IF 8.067
Feihu Mu,Benlin Dai,Wei Zhao,Shijian Zhou,Haibao Huang,Gang Yang,Dehua Xia,Yan Kong,Dennis Y.C. Leung
To boost the visible light catalytic performance of typical metal-organic frameworks (MOFs) materials (MIL-68(In)-NH 2 ), a novel stable Z-scheme Ag/Ag 3 PO 4 /MIL-68(In)-NH 2 plasmonic photocatalyst was constructed by electrostatic attraction, co-precipitation reaction, and in-situ photoreduction reaction methods for the first time. The photocatalytic activities of the photocatalysts are systematically explored by the photocatalytic degradation of bisphenol A (BPA) and reduction of Cr(VI) under visible light. Ag/Ag 3 PO 4 /MIL-68(In)-NH 2 displays the best photocatalytic performance among the as-prepared photocatalysts. The rate constant of BPA degradation on Ag/Ag 3 PO 4 /MIL-68(In)-NH 2 is 0.09655 min −1 , which is better than many reported photocatalytic materials. It also achieved a maximum rate constant of 0.02074 min −1 for Cr(VI) reduction. The boosted photocatalytic performance is due to the improved absorption caused by localized surface plasmon resonance (LSPR), effective interface charge transfer and separation, and more reactive sites provided by the large specific surface area. Besides, the photocatalytic degradation pathway of BPA is concluded according to GC-MS analysis. Finally, a more reasonable Z -scheme mechanism is speculated and verified through a series of characterizations and simulations, such as time-resolved photoluminescence spectroscopy (TRPL), electron spin resonance (ESR), and finite difference time domain (FDTD) method.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Huanan Zhao,Zipeng Xing,Siyi Su,Sijia Song,Zhenzi Li,Wei Zhou
NH 2 -MIL-53(Al)/CdS p-n heterojunctions are fabricated via facile two-step hydrothermal method. The formation of p-n heterojunctions could form built-in field, which favors spatial charge separation. The resultant NH 2 -MIL-53(Al)/CdS p-n heterojunctions with narrowed band gap extend the photoresponse, and have a high specific surface area of 417.7 m 2 g −1 , and a narrow pore size of 8.8 nm. Under visible light irradiation, the photocatalytic efficiency for reduction of Cr(VI) and removal of refractory pesticide trichlorophenol is up to 99.23 and 98.85 %, respectively. The photocatalytic oxygen evolution is also as high as 563.6 μmol g −1 h −1 . The excellent photocatalytic activity can be ascribed to the efficient p-n heterojunctions accelerating charge transfer and favoring spatial charge separation, and the special mesoporous structure supplying adequate surface-active sites and facilitating mass transfer. This facile strategy opens up new insights for fabricating other p-n heterojunctions photocatalysts with efficient solar energy conversion.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2021
·Vol. 127
·期 6
·1-10
·
IF 2.584
Liu Yurong,Niu Shaoyu,Hu Rong
In this work, the ferric cobalt sulfide/aminated graphene quantum dots (FeCo 2 S 4 /NH 2 -GQDs) nanoflowers grown on Ni foam substrate have been successfully fabricated via a facile two-step hydrothermal method. The as-prepared FeCo 2 S 4 /NH 2 -GQDs nanoflowers can expose plenty of electroactive sites, provide fast charge transfer paths and buffer the drastic volume change during long-term charge–discharge cycles. Therefore, the FeCo 2 S 4 /NH 2 -GQDs nanoflowers exhibit excellent supercapacitive performance, including high specific capacitance, excellent rate capability and cycling stability. The specific capacitance of FeCo 2 S 4 /NH 2 -GQDs composite electrode reaches 2314.8 and 1802.5 F g −1 at the current density of 1 and 10 A g −1 , respectively, while maintaining superior cycling stability with 95.1% capacitance retention after 5000 cycles. This study proves that NH 2 -GQDs are promising materials to enhance the electrochemical performance of bimetallic sulfides, providing a new insight for the design and fabrication of novel electrode materials for high-performance supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Jia Ding,Fei Liu,Chunling Qi,Yunlei Zhou,Huanshun Yin,Shiyun Ai
A novel photoelectrochemical (PEC) biosensor was constructed for DNA hydroxymethylation detection based on Bi 4 NbO 8 Cl/PTC-NH 2 heterojunction and Fe-MIL-88NH 2 , where Bi 4 NbO 8 Cl/PTC-NH 2 was employed as photoactive material and Fe-MIL-88NH 2 was adopted as artificial hydrogen peroxide mimic enzyme. Based on the structure of hydroxymethylated cytosine in DNA sequence, 5-hydroxymethyl-2’-deoxycytidine (5hmdC) was employed as detected target molecule for the first time using PEC technique. After Bi 4 NbO 8 Cl/PTC-NH 2 heterojunction was modified on the substrate electrode, thioglycolic acid (TGA) was captured by forming amide bond, where the sulfhydryl group (-SH) of TGA was employed as the specific recognition of 5hmdC. Under M. HhaI catalysis, the −CH 2 OH of 5hmdC reacted selectively with the –SH. Finally, Fe-MIL-88NH 2 was modified on the electrode based on the crosslinker of 4-formylphenylboronic acid (FPBA), where FPBA possessed two active groups of formyl and boronic acid group, reacting with glycosyl of 5hmdC and amino of Fe-MIL-88NH 2 . Under the catalysis effect of Fe-MIL-88NH 2 , the insoluble substance was produced on the surface of electrodes, resulting in distinct lessening of PEC response. Under optimal conditions, the photocurrent shows a linear relationship with the logarithm value of 5hmdC concentration from 0.01-100 nM with a low detection limit of 6.48 pM. More importantly, this method can be applied to investigate the influence of exogenous phytohormone on 5hmdC content in the genomic DNA of rice seedling roots and leaves.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Muhammad Zahid,Dongxiang Zhang,Xiyan Xu,Meng Pan,Muhammad Hammad ul haq,Alemtsehay Tesfay Reda,Wenguo Xu
Efficient iodine gas capture is necessitated in many industries like spent nuclear fuel off-gas treatment in view of environmental protection and resource recycling. However, the adsorption efficiency and stability of the current adsorbents are limited. In the present work, efficient and stable barbituric and thiobarbituric acid-based UiO-66-NH 2 adsorbents (i.e., UiO-66-NH-B.D and UiO-66-NH-T.D, respectively) have been synthesized by post-synthetic covalent modification. Characterization approaches, including SEM-EDS, TEM , XRD, FTIR, XPS, 1 H NMR, TGA and BET, are used to obtain information on the properties and adsorption mechanisms of these metal-organic framework (MOF) adsorbents. The kinetics and mechanisms involved are studied in detail. The treatment efficiency and recyclability of the adsorbents are checked and compared with the adsorbents reported in previous works. The results show that the current adsorbents are potentially suitable for efficient iodine gas capture. High maximum iodine adsorption amount by UiO-66-NH-B.D and UiO-66-NH-T.D (1.17 and 1.33 g/g) was achieved under 75 °C. These new adsorbents are thermally stable for iodine adsorption and regenerated and reused with good performance. The adsorption mechanisms were revealed based on experimental results, indicating that iodine is adsorbed by both physisorption and chemisorption .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Jian Han,Zongji Zhang,Zongrui Hao,Guicun Li,Tong Liu
Selective dehydrogenation of formic acid is regarded as a universal strategy for providing a clean energy carrier (hydrogen, H 2 ) to reduce the dependence on fossil fuel. In this work, ultrafine PdAg nanoparticles (NPs) are successfully immobilized on NH 2 -functionalized metal–organic framework MIL-101(Cr) by a facile wet-reduction method. By virtue of amine group, the size of obtained PdAg NPs can be controlled into 2.2 nm, which are monodispersed on NH 2 -MIL-101(Cr) surface. In addition, the resulting Pd 0.8 Ag 0.2 NPs/NH 2 -MIL-101(Cr) catalyst systems demonstrate excellent catalytic activity for formic acid decomposition in mild condition, the turn over frequency (TOF) value can achieve as high as 1475 h −1 at 323 K, which is comparable to most of the reported noble metal heterogeneous catalysts for this catalytic reaction under similar conditions. The excellent catalytic kinetics is mainly attributed to the ultrafine size and high dispersion of PdAg NPs. Also, the amine group from NH 2 -MIL-101(Cr) support facilitates the O H bond dissociation of formic acid and improves the kinetics of formic acid decomposition.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2020
·Vol. 10
·期 10
·2000
·
IF 4.324
Yongpan Shan,Chunli Xu,Hongjun Zhang,Huiping Chen,Muhammad Bilal,Shujun Niu,Lidong Cao,Qiliang Huang
Recently, metal–organic frameworks (MOFs) have become a dazzling star among porous materials used in many fields. Considering their intriguing features, MOFs have great prospects for application in the field of sustainable agriculture, especially as versatile pesticide-delivery vehicles. However, the study of MOF-based platforms for controlled pesticide release has just begun. Controlled pesticide release responsive to environmental stimuli is highly desirable for decreased agrochemical input, improved control efficacy and diminished adverse effects. In this work, simple, octahedral, iron-based MOFs (NH2-Fe-MIL-101) were synthesized through a microwave-assisted solvothermal method using Fe3+as the node and 2-aminoterephthalic acid as the organic ligand. Diniconazole (Dini), as a model fungicide, was loaded into NH2-Fe-MIL-101 to afford Dini@NH2-Fe-MIL-101 with a satisfactory loading content of 28.1%. The subsequent polydopamine (PDA) modification could endow Dini with pH-sensitive release patterns. The release of Dini from PDA@Dini@NH2-Fe-MIL-101 was much faster in an acidic medium compared to that in neutral and basic media. Moreover, Dini@NH2-Fe-MIL-101 and PDA@Dini@NH2-Fe-MIL-101 displayed good bioactivities against the pathogenic fungus causing wheat head scab (Fusarium graminearum). This research sought to reveal the feasibility of versatile MOFs as a pesticide-delivery platform in sustainable crop protection.Keywords:metal–organic framework;polydopamine;pesticide;pH-sensitive release;fungicidal activity
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2020
·
IF 6.785
Yuqiang Xiang,Huaduo Yan,Bingjie Zheng,Aroosha Faheem,Yonggang Hu
High-throughput analyses of multitarget markers can facilitate rapid and accurate clinical diagnosis. Suspension array assays, a flow cytometry-based analysis technology, are among some of the most promising multicomponent analysis methods for clinical diagnostics and research purposes. These assays are appropriate for examining low-volume, complex samples having trace amounts of analytes due to superior elimination of background. Physical shape is an important and promising code system, which uses a set of visually distinct patterns to identify different assay particles. Here, we presented a morphology recognizable suspension arrays based on the microorganisms with different morphologies. In this study, UiO-66-NH2 (UiO stands for University of Oslo) metal–organic frameworks (MOFs), was wrapped on the microorganism surface to form an innovative class of microorganism@UiO-66-NH2 composites for suspension array assays. The use of microorganisms endowed composites barcoding ability with their different morphology and size. Meanwhile, the UiO-66-NH2 provided a stable rigid shell, large specific surface area, and metal(IV) ions with multiple binding sites, which could simplify the protein immobilization procedure and enhance detection sensitivity. With this method, simultaneous detection of three colorectal cancer-related microRNA (miRNA), including miRNA-21, miRNA-17, and miRNA-182, could be easily achieved with femtomolar sensitivity by using a commercial flow cytometer. The synergy between microorganisms and MOFs make the composites a prospective barcoding candidate with excellent characteristics for multicomponent analysis, offering great potential for the development of high throughput and accurate diagnostics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2019
·
IF 1.795
Jiajia Sun,Sheng Feng,Shanshan Feng
A novel ternary heterojunction MWCNT/N-TiO 2 /UiO-66-NH 2 was synthesized by in-situ solvothermal-hydrothermal approach, showing superior photocatalytic degradation of KET under visible-light irradiation. The optimal MWCNT/N-TiO 2 /UiO-66-NH 2 (3:7) composite exhibits the highest degradation efficiency of KET (96%) in 120 min in comparison with pristine TiO 2 , N-TiO 2 , MWCNT , UiO-66-NH 2 and MWCNT/N-TiO 2 . The improved photocatalytic activity of MWCNT/N-TiO 2 /UiO-66-NH 2 can be ascribed to its improved visible-light absorption range, the large specific surface area based on UiO-66-NH 2 as well as the formation of an effective heterojunction. The formed ternary composite facilitates the separation and transfer of photoexcited charge carrier, which is confirmed from the results of PL. The photocatalytic mechanism is further proposed based on the trapping experiment, and the transfer process of photoinduced electron-hole pairs is discussed. This work provides an effective strategy for designing a new ternary photocatalytic system toward degradation of organic pollutants.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2019
·
IF 1.795
Yu Guo,Jie Li,Xuanxuan Yang,Yongbing Lou,Jinxi Chen
Hydrogen production by photocatalysis under visible light irradiation is a pivotal means of obtaining hydrogen. In this study, Zn 0.5 Cd 0.5 S was studied to have optimal hydrogen production performance among different zinc-cadmium ratios of Zn x Cd 1-x S, and a series of Zn 0.5 Cd 0.5 S/MIL-125-NH 2 (Ti) composites with different MIL-125-NH 2 (Ti) contents were prepared by simple ultrasonic method. When the percentage of addition of MIL-125-NH 2 (Ti) was 40%, the optimum hydrogen production rate was 92,498 μmol h −1 g −1 , and the photocatalytic activity was still stable even after 16 h. The mechanism investigations demonstrated that this excellent activity was owing to enhanced visible light absorption intensity, extremely efficient electron transfer and proper conduction band position. This work provides new insights into highly efficient and stable photocatalyst in hydrogen production from water without noble metal doping.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2023
·Vol. 13
·期 50
·35078-35087
·
IF 3.9
Yi Liu,Zhipeng Yuan,Yanrong Chen
Excessive accumulation of bilirubin in patients with hyperbilirubinemia can lead to tissue and organ damage and neurological diseases, and is even life-threatening in severe cases. Hemoperfusion is an effective method for removing bilirubin, but clinically used hemoperfusion adsorbents have unsatisfactory adsorption capacity and kinetics. In order to obtain a safe and efficient bilirubin adsorbent, Zr-based Metal–Organic Framework (MOF) material UiO-66 with high specific surface area and aqueous medium stability was prepared and modified with varying degrees of amination to improve its adsorption capacity. According to adsorption experiments in aqueous solution and simulated plasma, it was confirmed that the unsaturated coordinated zirconium in UiO-66 can effectively induce the aggregation and precipitation of free bilirubin unbound to albumin and the amino group on UiO-66-NH2 has a strong affinity for albumin bound bilirubin. The adsorption effect of UiO-66-NH2 with a high degree of amino modification is significantly stronger than that of UiO-66-NH2 with a low degree of modification. In simulated plasma with a bilirubin concentration of 40 mg dL−1, the adsorption capacities of UiO-66 and UiO-66-NH2-1.9 can reach 69.08 mg g−1 and 81.13 mg g−1. The adsorption isotherm fitting and adsorption kinetics fitting results also show that UiO-66 and UiO-66-NH2 are good adsorbents for bilirubin. In dynamic adsorption, the adsorbents also showed good performance and did not affect the protein in the plasma. The hemolysis test, coagulation time test, and cytotoxicity test confirmed that the bilirubin adsorbents based on UiO-66 and UiO-66-NH2 have good blood compatibility and biocompatibility. This study provides new ideas for the development of a novel bilirubin adsorbent and a theoretical basis for the study of bilirubin adsorption mechanisms.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）