文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4069至4080个,产品总数8,185个

切换升序
LIGHT
INORGANIC CHEMISTRY · 2026 · IF 4.6

Chiral Blue-Light Excited Hybrid Copper Iodides with Circularly Polarized Luminescence for Lighting and X-ray Imaging

Rong-Yan Zhang,Ting Zhu,Ting Shang,Geng-Yue Liu,Guo Peng,Xiao-Ming Ren

Abstract Chiral hybrid Cu(I) halides combine outstanding optoelectronic properties with structural chirality, making them promising materials for diverse applications. However, the use of chiral hybrid copper(I) halides for lighting and X-ray scintillators remains largely unexplored. Herein, a pair of chiral hybrid Cu(I) iodides (1-R and 1-S) were prepared, with their chirality unequivocally confirmed by second-harmonic generation (SHG) measurements. Both compounds exhibit yellow broadband emission peaking at 545 nm under blue-light excitation, with a photoluminescence quantum yield (PLQY) of 96%. Theoretical and photophysical studies uncover that their emission arises from two distinct self-trapped exciton (STE) states. Both compounds show pronounced circularly polarized luminescence (CPL), possessing luminescence dissymmetry factors (glum) on the order of 10–3. Based on compound 1-R, a single-component white light-emitting diode (WLED) with a color rendering index (CRI) of 81 was developed. Meanwhile, compound 1-R demonstrates strong X-ray absorption, a high light yield of 24,528 photons·MeV–1, and a low detection limit of 112 nGy·s–1, enabling the corresponding flexible film to achieve an X-ray imaging spatial resolution of about 7 lp·mm–1. This study establishes a reliable strategy for discovering stable and highly efficient chiral hybrid metal halides with multifunctional properties.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2026 · IF 7.6

Developing a Light-Regulated Localized Thermo SSF System with Ti3O5/PDA Heterostructures to Enhance Cellulosic Ethanol Production

Qiang Yuanyuan,Wang Xuechuan,Zhou Yi,Yang Lei,Mao Haojie,He Bin,Zhu Xing

The promotion of cellulosic ethanol is highly significant for enhancing energy security, mitigating environmental challenges, and advancing sustainable development, with simultaneous saccharification and fermentation (SSF) being the most widely used method for its commercialization. However, the disparity between the optimal operating temperatures of yeast cells (∼35 ° C) and cellulase (∼48 ° C) poses a major constraint on the efficiency of SSF processes. To address this challenge, this study presents a strategy for constructing SSF systems based on photocontrolled localized thermal effects. Heterostructured Ti 3 O 5 nanospheres were surface-coated with polydopamine (PDA) to enhance photothermal performance, followed by grafting azobenzene-containing polymer brushes as a thermal energy reservoir to immobilize cellulase. By precisely modulating the microenvironmental temperature around the enzymes, this approach enables both cellulase and yeasts to operate near their respective optimal temperatures in the SSF reactor. Experimental results demonstrate that the ethanol yield achieved using the developed system is 23% higher than that obtained under conventional compromise temperature conditions. This method offers a promising and practical pathway to improve the production efficiency of cellulosic ethanol, with considerable potential for industrial application.

CAS / MDL: 3837-55-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING SCIENCE · 2026 · IF 5.1

Enhancing light olefin production by pre-cracking and acidity tuning over hierarchical La/ZSM-5@ASA composites

Shuang Liu,Lei Ye,Shaokai Huang,Peng Zhou,Mingxuan Ma,Miao Hu,Xujin Ren,Xin Pu,Xin Han,Jichang Liu

La/ZSM-5@ASA composites were developed by a stepwise assembly strategy. • La 3+ displaced the acidic protons and generated new BAS [Si-OLa(OH) 2 -Al]. • ASA overcoat passivated external surface acid sites and enabled pre-cracking. • Hierarchical La/ZSM-5@ASA shows high light-olefin selectivity in n -paraffin cracking. Catalytic cracking of surplus automotive fuels, heavy oil and waste plastics into light olefins is an efficient resource-reutilization strategy. Conventional ZSM-5 zeolites, however, suffer from limited light-olefin selectivity and coke-induced deactivation due to strong acidity and microporous constraints. Herein, a stepwise assembly strategy involving La modification and subsequent amorphous silica-alumina (ASA) overcoating was developed to construct core–shell catalysts with optimized acidity and diffusion. La modification modulated acid strength and distribution, and DFT calculations revealed it lowered the energy barrier of the rate-determining protonation step, promoting propylene formation. The ASA overcoat, applied via co-gelation, passivated external strong Brønsted acid sites and introduced open interfacial diffusion channels. This architecture enabled pre-cracking of reactants, promoting efficient C-C bond cleavage and suppressing secondary reactions. The optimized hierarchical La/ZSM-5@ASA(1:1) achieved 63.10% total ethylene and propylene selectivity in n -heptane cracking, outperforming ZSM-5 and 0.50La/ZSM-5 by 5.12% and 1.38%, respectively. This advantage is more pronounced for longer linear hydrocarbons, and the suppression of methane and coke precursors boosts atom utilization efficiency, indicating a carbon-economic cracking pathway.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2023 ·Vol. 14 ·期 1 ·1-11 · IF 16.6

Bioinspired thermadapt shape-memory polymer with light-induced reversible fluorescence for rewritable 2D/3D-encoding information carriers

Huang Jinhui,Jiang Yue,Chen Qiuyu,Xie Hui,Zhou Shaobing

Fluorescent materials have attracted widespread attention for information encryption owing to their stimuli-responsive color-shifting. However, the 2D encoding of fluorescent images poses a risk of information leakage. Herein, inspired by the mimic octopus capable of camouflage by changing colors and shapes, we develop a thermadapt shape-memory fluorescent film (TSFF) for integrating 2D/3D encoding in one system. The TSFF is based on anthracene group with reversible photo-cross-linking and poly (ethylene-co-vinyl acetate) network with thermadapt shape-memory properties. The reversible photo-cross-linking of anthracene is accompanied by repeatable fluorescence-shifting and enables rewritable 2D encoding. Meanwhile, the thermadapt shape-memory properties not only enables the reconfiguration of the permanent shape for creating and erasing 3D patterns, i.e., rewritable 3D information, but also facilitates recoverable shape programming for 3D encoding. This rewritable 2D/3D encoding strategy can enhance information security because only designated inspectors can decode the information by providing sequential heating for shape recovery and UV exposure. Overall, TSFF capable of rewritable 2D/3D encoding will inspire the design of smart materials for high-security information carriers.

CAS / MDL: 814-68-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MATERIALS RESEARCH BULLETIN · 2023 · IF 5.4

Acid-alkali assisted synthesis of white tremella-like g-C3N4 homojunction for photocatalytic degradation under visible light

Jiayi Wang,Penggang Ren,Xueyan Zhao,Zhengyan Chen,Yanling Jin,Zengping Zhang

Graphite nitride (g-C 3 N 4 ) photocatalyst has attracted tremendous attention because of its suitable visible light-driven band gap, facile synthesis from low-cost nitrogen­containing organic precursors, and high stability. To address the limitations of conventional single modification methods. Here, a novel homojunction photocatalyst was developed by combining defective g-C 3 N 4 (CNx) and flaked g-C 3 N 4 (CN) through alkali etching and acid stripping techniques. Compared to the conventional g-C 3 N 4 , the homojunction photocatalyst (CNx/CN) exhibited white tremella-like folds, and the homojunction structure allowed faster transfer and separation of electrons and holes in CNx/CN. Under the synergistic effect of morphological modulation and homojunction construction, CNx/CN exhibited excellent degradation performance (the degradation for MB is 94.2 %) in the degradation of methylene blue (MB) and showed excellent cycling stability after four cycling experiments. Furthermore, CNx/CN exhibited satisfactory practicality in several simulation experiments, including evaluations of pH, co-existing cations, and real water. This work provides a new strategy for constructing an efficient g-C 3 N 4 -based homojunction photocatalyst for practical application in contaminated water treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Science China-Materials · 2023 ·Vol. 66 ·期 12 ·4782-4793 · IF 8.1

Light-driven locomotive soft actuator and multi-functional sensors based on asymmetric PVA/carbon/PE bilayer film

Wu Feng,Lin Xiaoying,Xu Yuqian,Zhang Di,He Yunqing,Liu Mingxian

Soft actuators and micro-robots receive significant attention for their potential applications in transportation, photovoltaic conversion devices, clinical care, and other fields. In this work, a polyvinyl alcohol/Chinese ink mixture was uniformly coated on polyethylene film for preparing structure-stabilized bilayer soft actuators. Due to the significant difference in thermal expansion coefficients between the two layers, the actuator can achieve a large bending deformation with a fast response speed under xenon light. A large amplitude of bending angle of 1260° was achieved in 6 s. A soft-body robot similar to an inchworm was constructed by changing the intensity of xenon or near-infrared light combined with the bionic structure design of an inchworm. The robot can realize various forms of movements (such as crawling and pushing boxes) on different surfaces (such as paper and leaves). Light-driven applications such as hands capable of grasping objects (grasping objects 14 times their weight), cats exhibiting variable expressions, elephant trunks performing curling and retraction, and bionic flowers realizing flowering and closing can be realized. In addition, based on the good photothermal conversion and pressure sensing performance of the bilayer actuator, it is able to monitor daily human activities (such as joint flexion, abdominal breathing, water swallowing, and other movements) and integrate with photoelectric conversion devices. This versatile and diverse drive-mode soft robot exhibits significant potential for applications such as wearable devices, transportation, photovoltaic conversion devices, and clinical therapies.

CAS / MDL: 9002-89-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Small · 2023 · IF 13.3

Chiral Phosphorescent Carbonized Polymer Dots Relayed Light-Harvesting System for Color-Tunable Circularly Polarized Room Temperature Phosphorescence

Feixiang Wang,Shengju Zhou,Youxin Zhang,Yijie Wang,Rui Guo,Haibin Xiao,Xiaofeng Sun

Carbonized polymer dots (CPDs) with a circularly polarized fluorescence property have received increasing attention in recent years. However, it is still a great challenge to construct circularly polarized room-temperature phosphorescence (CPRTP) CPDs. Herein, a simple approach to the synthesis of intrinsically CPRTP CPDs for the first time by utilizing sodium alginate and l -/ d -arginine as precursors under relatively mild reaction conditions is presented. Notably, the CPDs exhibit both chirality and green RTP in solid states. Furthermore, color-tunable CPRTP is successfully achieved by engineering chiral light-harvesting systems based on circularly polarized phosphorescence resonance energy transfer ( C -PRET) where the CPDs with green RTP function as an initiator of chirality and light absorbance, and commercially available fluorescent dyes with different emission colors ranging from yellow to red serve as the terminal acceptors. Through one-step or sequential C -PRET, the light-harvesting systems can simultaneously furnish energy transfer and chirality transmission/amplification. Given the multicolor long afterglow, lifetime-tunable, and CPRTP properties, their potential applications in multiple information encryption are demonstrated.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2023 · IF 7.2

Revealing the role of oxygen vacancies in bimetallic CdBiO2Br ultrathin nanosheets for boosting visible-light photocatalytic activity

Binxian Gu,Haijie Zhang,Meng Ye,Ting Zhou,Yuemeng Duan,Xingwang Zhu,Jianjian Yi,Qingsong Hu

The development of photocatalysts with high-efficiency spatial separation of photoinduced carriers and activation of molecular oxygen is of great significance in the degradation of organic contaminants. Herein, we successfully fabricate ultrathin CdBiO 2 Br nanosheets with Sillén structure and different oxygen vacancies (OVs) concentration employing a simple ionothermal method. Furthermore, the photocatalytic activity was evaluated employing tetracycline , ciprofloxacin , and rhodamine B as the target contaminants under visible light irradiation . Among which, oxygen-vacancy rich (ROV) CdBiO 2 Br showed the highest photocatalytic performance compared to oxygen-vacancy deficient (DOV) CdBiO 2 Br and bulk CdBiO 2 Br. In addition, the intermediate degradation products were proved to show a significant decrease in toxicity by microbial toxicology experiments. Based on a series of characterization analyses, the intrinsic factors of ROV CdBiO 2 Br for enhanced photocatalytic performance are studied, and a possible photocatalytic mechanism is summarized. This work reinforces the idea that defect engineering and surface structure engineering affect photocatalytic activity simultaneously.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
OPTICAL MATERIALS · 2023 · IF 3.9

The influence of microcrystalline structure and crystalline size on visible light transmission of polyvinyl alcohol optical films

Chenchen Ding,Wenzhong Ma,Jing Zhong

The crosslinking degrees and microcrystalline structure determine the light transmission of polyvinyl alcohol (PVA) optical films and mechanical properties . Preparing a PVA optical film satisfying these two aspects with a low swelling propensity is still challenging. Herein, PVA optical films were prepared by solution casting with environment-friendly water as a solvent. Based on PVA's unique monoclinic lamellar crystal structure, the optical properties , such as light transmission and haze, were revealed by changing the original molecular weight , polymer concentration, and heat treatment conditions. We systematically investigated the effect of the original molecular weight and polymer concentration on the PVA crosslinking degrees. The crystal size effect on the optical properties was investigated through a heat treatment for the crosslinked PVA films. The rotational rheometer and swelling tests revealed the PVA crossling degrees. DSC and XRD are utilized to systematically investigate the relationship between the crystalline structure of PVA and its optical transparency and mechanical properties. The PVA optical films (F2099-8%) derived from 8 wt% PVA2099/water solution exhibit excellent light transmission with transparency of 90.2 % and haze of 0.4 % due to the smallest crystal size of 3.29 nm. An appropriate heat treatment process could further improve the mechanical and swelling-resistant properties. The F2099-8% sample after heat treatment (<200 °C, 30 min) had a significant enhancement of mechanical strength (200 % increase) and swelling resistance (300 % decrease), but only 6 % transmittance decreased, and 2 % haze increased because of crystal size increasing. The PVA optical films prepared in this work showed relatively high light transmission and high mechanical and swelling-resistant properties, which have a good potential application in display panels and camera lenses.

CAS / MDL: 7553-56-2 7681-11-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Energy Materials · 2023 · IF 6.4

Double Type-II Heterojunction MnS/Mn–Cd–S/Ni-Polyoxometalate for Improving Visible-Light-Driven H2 Production

Yuqing Hu,Puhui Deng,Wenying Wang,Linping Zhang,Yu Hou

Element doping and collaboration with other cocatalysts are two vital strategies to improve the photoelectrochemical properties and overcome the drawbacks of CdS for better photocatalytic performance. In this work, a series of manganese cadmium sulfides (MnxCd1–xS) were obtained by a solvothermal method. When x is equal to or greater than 0.3, MnxCd1–xS is composed of Mn–Cd–S sosoloid and MnS. Among all these MnxCd1–xS products, the Mn0.5Cd0.5S sample showed the best photocatalytic hydrogen production (5.99 mmol g–1 h–1). To further elevate the hydrogen production rate of Mn0.5Cd0.5S, four kinds of Ni-POMs were coupled with it as cocatalysts, and all these composite photocatalysts displayed enhanced performance. The highest efficiency was observed for 15-Ni4–Mn0.5Cd0.5S, which is up to 36.58 mmol g–1 h–1. Various characterizations indicated that Ni4P2W18, Mn–Cd–S sosoloid and MnS in the 15-Ni4–Mn0.5Cd0.5S composite form a double type-II heterojunction, which facilitates the separation and transfer of photogenerated carriers.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2023 · IF 8.6

Boosting the electrochemical CO2 reduction performance by Cu2O/β-Bi2O3 bimetallic heterojunction with the assistance of light

Luwei Peng,Wenshuang Lou,Lulu Li,Yang Zhang,Xi Luo,Nengneng Xu,Jinli Qiao

CO 2 , as one of the greenhouse gases, actually represents a cheap and abundant C1 fuel to produce fuels and chemical stocks. Herein, inspired by photocatalysis and electrocatalysis, we have successfully synthesized a series of copper and bismuth oxides with heterostructure by a first co-electrodeposition method and then by thermal treatment at different temperatures. The bimetallic oxide (Cu 2 O/β-Bi 2 O 3 ) at 300 °C with the main exposure of β-Bi 2 O 3 (2   0   1) planes shows the beautiful micro-flower morphology with numerous petals in thickness around 20 ∼ 40 nm. Therefore, the Cu 2 O/β-Bi 2 O 3 heterostructure with active edge sites can electrochemically convert CO 2 into formate with a promising Faradaic efficiency (96.3 %) and current density (40.4 mA cm −2 ) at − 0.97 V vs. RHE. Specifically, the current density of Cu 2 O/β-Bi 2 O 3 bimetallic catalyst can be largely enhanced to 48.5 mA cm −2 at − 0.92 V vs. RHE with the assistance of light compared to the 30.1 mA cm −2 without light. The production rate of formate with the assistance of light can also be increased to 705.1 μmol h −1 cm −2 , superior to that of 536.4 μmol h −1 cm −2 without light. Such an excellent photo-assisted electrochemical CO 2 reduction performance is due to the fast charge-transfer process between Cu 2 O and β-Bi 2 O 3 . This study may provide a new route to directly synthesize the photoactive electrocatalysts with more edge sites and heterojunction for promoting electrochemical CO 2 reduction performance with the assistance of light field.

CAS / MDL: 141-53-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2023 · IF 5.9

Ionic Doping of CsPbI3 Perovskite Nanocrystals Improves Luminescence and Stability in Patterned Large-Area Light-Emitting Diodes

Hongyu Lv,Xin Tang,Menglu Chen

With high quantum efficiency, unique bandgap, and narrow emission band, all-inorganic CsPbI3 halide perovskite nanocrystals have been widely acknowledged as competitive candidates for pure red light-emitting diodes (LEDs). However, the large-scale manufacturing and stability of CsPbI3 perovskites are the main obstacles for practical LEDs. In this work, by Mg2+/Yb3+ codoping, we successfully improve the luminous intensity (192%) in an ambient environment. What is more, these ionic doped CsPbI3 perovskite nanocrystals are thermally stable at 120 °C. Based on these perovskite nanocrystals, we also fabricate large-scale patterned LEDs (25.4 × 25.4 mm). At a bias voltage of 6 V, the fabricated LEDs exhibit a luminance of 749 cd m–2. At a current density of 6.4 mA cm–2, the fabricated LEDs achieved an external quantum efficiency of 10.9%. This result is expected to fuel the rapid growth of large-area pure red LEDs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。