Catalysis Science & Technology
·
2016
·Vol. 6
·期 17
·6513-6524
·
IF 5.287
Ziyang Lu,Xiaoxu Zhao,Zhi Zhu,Minshan Song,Nailing Gao,Youshan Wang,Zhongfei Ma,Weidong Shi,Yongsheng Yan,Hongjun Dong
A novel hollow capsule-like recyclable functional ZnO/C/Fe3O4 was synthesized by employing the convenient and mild sol–gel method combined with the surface imprinting technique, which possessed good light response ability, superior magnetic separation performance and excellent reproducibility. This as-prepared functional ZnO/C/Fe3O4 was proved to not only exhibit high photocatalytic activity but also possess a strong three-dimensional oriented ability to selectively recognize and photodegrade danofloxacin mesylate. Through getting insight into the mechanism, we can confirm that in this photocatalytic reaction, h+ and ˙OH play major roles compared with ˙O2−. This work not only puts forward a novel design idea of functional semiconductor materials but also is expected to be widely applied to the oriented recognition and removal of a target substance according to the practical requirement.
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2020
·
IF 3.573
Hai Jiang,Yingli Ding,Juyang Liu,Arun Alagarsamy,Li Pan,Dongpo Song,Kunyu Zhang,Yuesheng Li
A series of poly(L-lactic acid) (PLLA)-b-poly(methyl methacrylate) (PMMA) block copolymers with well-defined chemical structures were synthesized by ring-opening polymerization followed by atom-transfer radical polymerization. These copolymers were investigated as effective A-b-C-type compatibilizers for poly(lactic acid) (PLA) and renewable poly(epichlorohydrin-co-ethylene oxide) (ECO) elastomer blends. Compared to the neat binary PLA/ECO blend, the PLLA-b-PMMA copolymers significantly improved the compatibility of the PLA and ECO phases, leading to enhanced interfacial adhesion and mechanical performance. Interestingly, by tuning the chain structure and adding different amounts of the copolymer, two different phase structures were achieved in the blends: a typical sea-island morphology of the blends with a low content of PLLA-b-PMMA block copolymers (<15%) and a unique tricontinuous phase morphology with a percolated PLLA-b-PMMA copolymer zone of the blend with the addition of 20 wt % asymmetric A181M868 block copolymer. Both the morphological structures endowed the blends with excellent toughness, including a high elongation at break (>260%) and non-broken behavior with an optimum impact strength above 63 kJ/m2. Accordingly, two different toughening mechanisms were proposed for the blends with different phase structures. The PLLA-b-PMMA block copolymers provide highly efficient and versatile A-b-C-type compatibilizers to fabricate high-performance sustainable PLA-based materials for wide application prospects.
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry C
·
2011
·
IF 4.524
Maiyong Zhu,Guowang Diao
An efficient magnetic carbon nanocomposite supported Pd nanoparticle catalyst has been prepared by a three-step process in this report. The morphology, inner structure, and magnetic properties of all products were studied with transmission electron microscopy, X-ray powder diffraction, Fourier translation infrared spectroscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometer. The Suzuki and Heck coupling reactions were used to demonstrate the catalytic efficiency of the as-prepared Pd/Fe3O4@C (Pd/MFC) nanocomposite catalyst. The results showed that the catalyst is completely recoverable with the simple application of an external magnetic field and the catalytic efficiency shows no obvious loss for Suzuki and Heck coupling reactions even after five repeated cycles.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·Vol. 14
·期 1
·120487
·
IF 7.2
Jifang Zhang,Chengcheng Suo,Hongru Zhang,Wei Li,Sha Luo,Bing Tian,Chunhui Ma,Shouxin Liu
Constructing an efficient and low-cost electrocatalyst was highly necessary in electrocatalytic lignin depolymerization study. We prepared a unique 1D/2D/1D nanoflower electrocatalyst (Ti 20 @ZIS-Sv@C 0.5 (Ⅱ)) composed of TiO 2 , ZnIn 2 S 4 and C nanosheets by electrostatic self-assembly through solvothermal method. The TiO 2 was located as the core of catalyst and covered by the C deposited ZnIn 2 S 4 nanosheets. The electrochemical impedance (R ct , 248.5 Ω; R L , 6.511 Ω), C dl (1.75817 mF cm −2 ), Tafel efficiency (6.28 mV dec −1 ) and photocurrent intensity (5.23 μA) of Ti 20 @ZIS-Sv@C 0.5 (Ⅱ) exhibited higher electrocatalytic activity than that of original ZnIn 2 S 4 . Under optimized conditions, electrocatalytic process achieved 100 % C α -C β (β-O-4) and C Ar -O (α-O-4) cleavage efficiency and 244.37 mg g −1 benzaldehyde yield. We have further indicated C α -C β (β-O-4) and C Ar -O (α-O-4) cleavage mechanism by Cl-induced radical oxidation pathway. The electrocatalytic depolymerization of G-type lignin could obtained at least 14 molecular products (including 18.21 mg g −1 2-hydroxy-1-phenylethan-one, 11.39 mg g −1 pyrocatechol and 1.25 mg g −1 benzaldehyde). Mechanism investigation suggested the generation of chlorine radical (•Cl), followed by C-H activation and synergistic effect of Ti 20 @ZIS-Sv@C 0.5 (Ⅱ), leading to highly efficient lignin linkages cleavage. This work has developed an efficient electrocatalyst for lignin valorisation to produce aromatics via an electrocatalytic radical pathway.
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2023
·
IF 4.6
Xiangquan Qin,Yiping Jiang,Jie Chen,Fuquan Yao,Longyi Jin,Zhiqi Cong
Selective hydroxylation of C( sp 3 )–H bonds is a long-standing challenge in the organic synthesis field. We herein report an artificial P450 peroxygenase system facilitated by ω-pyridyl fatty acyl amino acids that can hydroxylate broad-spectrum alkanes, including linear and cyclic alkanes and benzylic and allylic alkane chains. Compared with the previously reported dual-functional small molecule (DFSM) with imidazole as a catalytic group (Im-DFSM), pyridyl DFSM (Pyd-DFSM) produced substantially higher total turnover numbers (TTNs) for the hydroxylation of medium-chain alkanes and cycloalkanes (C6–C8), e.g., 12.0-fold and 17.1-fold increased TTNs of P450 mutant F87A/T268V for heptane and cycloheptane , respectively. In addition, Pyd-DFSM altered the enantioselectivity of benzylic hydroxylation, e.g., it almost inverted the configuration observed in the benzylic hydroxylation of ethylbenzene and tetralin . More importantly, Pyd-DFSM showed excellent regioselectivity for allylic hydroxylation over epoxidation of terminal alkenes and cycloalkenes , e.g., up to 94% allylic hydroxylation of 1-hexene was observed. This work significantly enhances the catalytic toolbox of the DFSM-facilitated P450 peroxygenase system; it not only substantially expands the chemical space of P450 enzymes, but also provides an alternative solution for the selective hydroxylation of C( sp 3 )–H bonds.
✓ 已验证
DOI
高影响因子
Catalysts
·
2022
·Vol. 12
·期 12
·1625
·
IF 4.501
Bo Chen,Zhi-Ze Cao,Zhi-Jun Diao,Liang-Qiu Huang,Si-Jia Zhao,Hong Yuan,Jia-Meng He
Hydrogenolysis via targeted depolymerization of C–O linkages is a techno-economic beneficial process for converting lignin into highly valuable chemicals and clean fuels. In this work, a macroporous silicalite-1 (S-1) array-supported Ru-Ni metallic phosphide composite (Ru-Ni12P5/S-15) was prepared as a catalyst and hydrogenolysis activity under relative mild conditions was investigated using a series of compounds containing ether linkages as lignin-related model compounds. The Lewis acid sites originating from the unreduced Ru species and the macroporous geometry of S-1 significantly influenced hydrogenolysis activity and product selectivity. Analysis of the mechanism demonstrated that both the aryl ether and aliphatic ether linkages were directly hydrogenated over Ru-Ni12P5/S-15. 2D-HSQC-NMR spectroscopy demonstrated that the ether linkages of lignin were efficiently cleaved by Ru-Ni12P5/S-15. Furthermore, the obtained liquid hydrogenolysis products are high value-added chemicals used for pharmaceutical production and can be facilely tuned via the reaction conditions.
✓ 已验证
DOI
高影响因子
Environmental Science-Nano
·
2020
·Vol. 7
·期 12
·3814-3823
·
IF 7.683
Hanfeng Zhou,Zhibo Deng,Tianbao Liu,Tao Liu,Lijuan Zhang,Xintai Su,Zhang Lin
The science linking thermochemical conversion of large-scale industry oily sludge with applied materials has been improved in the last ten years. However, with the traditional converting methods it is hard to precisely control the composition and structure of oily sludge-based products during pyrolysis due to the complexity of the composition of the oily sludge. Here, a chlorinating calcination method using sodium chloride (NaCl) as a chlorinating salt and template was first developed to prepare porous Fe–N–C materials (FCN-500) through pyrolysis of oily sludge containing iron-bearing minerals and pyridine. The formation mechanism of FCN-500 was proposed, where iron ions (Fe3+) from the inorganic component (anorthite) in the sludge were rapidly dissociated with the assistance of NaCl, followed by coordination with the organic component (pyridine nitrogen) in the oily sludge to form the pyridine nitrogen–iron ((C5H6N)n–Fe) complex, and then carbonization. As-obtained FCN-500 exhibited higher specific capacitance (286.3 F g−1 at a current density of 0.5 A g−1), enhanced energy density (33.5 W h kg−1 at a power density of 606.1 W kg−1) and more excellent stability and durability (more than 80.1% capacitance retention after 10 000 cycles) compared with two other electrodes. The reasonably better performance of the obtained FCN-500 in supercapacitors (SCs) is attributed to its large surface area, hierarchically porous channels, high conductivity, and unique Fe–N–C structure. Therefore, this work not only provides a feasible way to solve the bottleneck problem in sludge pyrolysis, but also provides a method to design large scale porous Fe–N–C materials for practical applications.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 39
·20666-20676
·
IF 11.301
Die Su,Li Liu,Zhixiao Liu,Jing Dai,Jiaxing Wen,Min Yang,Sidra Jamil,Huiqiu Deng,Guozhong Cao,Xianyou Wang
Ta-doped TiO2/C nanofibers are synthesized by an electrospinning method. First-principles calculations reveal that the Ta dopant can lower the Li/K diffusion barrier, which is beneficial for improving the rate capability. According to the electronic structure analysis, the dopant can obviously shift the conduction band of TiO2 downward, resulting in significantly improved electronic conductivity. Ta doping causes phase transformation from anatase to rutile, and increases the specific surface area. The well-designed rutile Ta-doped TiO2/C nanofibers show outstanding electrochemical properties in both Li-metal half cells and K-metal half cells, which are much better than those of pristine anatase TiO2/C nanofibers. At 2 A g−1, 5% rutile Ta-doped TiO2/C nanofibers could deliver high reversible specific capacities of 399 mA h g−1 in Li-ion batteries after 1000 cycles whereas deliver 148 mA h g−1 in K-ion batteries after 800 cycles. When assembled, the full cells with 5% rutile Ta-doped TiO2/C nanofibers as the anode and commercial LiFePO4/perylene-3,4,9,10-tetracarboxylic dianhydride as the cathode show excellent cycling performance and can light up more than 18 LEDs. These results demonstrate that Ta-doped TiO2/C nanofibers are a promising anode material for Li/K ion batteries.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2021
·Vol. 32
·期 14
·19901-19911
·
IF 2.478
Wang Fei,Liu Xiaoyu,Liu Zhuang,Wang Yanming
The large-scale application of Li-ion batteries requires high-performance cathode materials. Herein, a high-activity Li 3 V 2 (PO 4 ) 3 /C composite cathode has been fabricated through a solid-state reaction employing dual carbon sources of poly(acrylic acid) and soluble starch. The effects of single carbon source and dual carbon sources on the physical and electrochemical properties of Li 3 V 2 (PO 4 ) 3 /C are analyzed. The porous structure induced by poly(acrylic acid) and highly conductive carbon resulted from soluble starch enable the composite to achieve large discharge capacities and stable cyclability at high C-rates. At 3.0–4.3 V and 10 C, a large discharge capacity of 121 mAh g −1 (nearly 91% of the theoretical capacity) can be obtained, along with high capacity retention of 88% over 1000 cycles. Furthermore, at 3.0–4.8 V, the composite also possesses larger high-rate capacities and better cyclability than other composites prepared using single carbon source. The dual carbon sources bring a synergistic effect to the enhancement of electrochemical performances of the Li 3 V 2 (PO 4 ) 3 /C composite.
✓ 已验证
DOI
高影响因子
Sustainable Energy & Fuels
·
2022
·Vol. 6
·期 8
·2020-2037
·
IF 6.813
Chang Lin Liu,Yang Liu,Xing Liu,Yun Gong
The complex [Me2NH2]V3O7 was synthesized solvothermally, and possessed a 2D [V3O7]− anionic layer with an interlayer [Me2NH2]+ cation. After cationic exchange and subsequent annealing, Al3+, Mn2+ or Zn2+-doped V2O3/C composites were obtained. Among them, oxygen-deficient Al3+-doped V2O3/C exhibits outstanding long-term cycling durability even with a high carbon content of 23.97 at%. The capacity retention is 94.7% after 1000 discharge/charge cycles at 5 A g−1, which is superior to V2O3/C, Mn2+ and Zn2+-doped V2O3/C composites. Furthermore, Al3+-doped V2O3/C with oxygen vacancies displays excellent rate performance with 90.3% capacity retention when the current density is increased 50-fold, and can deliver an average specific capacity of 340, 360, 365, 356, 343 and 307 mA h g−1 at 0.1, 0.2, 0.5, 1, 2 and 5 A g−1, respectively, and the capacity returns to 375 mA h g−1 at 0.1 A g−1. A series of ex situ characterizations revealed that Al3+-doped V2O3/C completely transformed into Al3+-doped Zn3(OH)2V2O7·2H2O during the 1st charge process. However, the capacity of the sample far exceeds the theoretical capacity of Zn3(OH)2V2O7·2H2O (224 mA h g−1), which is associated with the doping of Al3+ and its dominant surface-controlled the capacitive behavior. It is also expected that the transformation occurs in the inner accessible sites of the nonporous V2O3, which are provided by its rich oxygen vacancies. Although DFT calculations indicate that the doping of Al3+ into Zn3(OH)2V2O7·2H2O is energetically unfavorable, the present work provides a facile strategy for the preparation of Al3+-doped Zn3(OH)2V2O7·2H2O. Furthermore, the doping of Al3+ can change the host framework of Zn3(OH)2V2O7·2H2O, the positions, and the micro-environments of the inserted Zn2+, thus decreasing the binding energy and diffusion barrier of Zn2+.
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Shuai Liu,Wenjie Tao,Yang Yu,Sandile Fakudze,Chen Wang,Jiaxin Wang,Jiangang Han,Jianqiang Chen
Aiming at enhancing cyclic stability and fast charging performance of lithium-ion batteries (LIBs), a sandwich structured composite with a buffer layer of porous silicon (Si) between the carbon layer and SnO 2 layer (C/Si@SnO 2 ) was developed by using ball milling. The results showed that the Si layer with plenty of mesoporous and cracks was coated successfully and the introduction of Si increased the disordered structure of SnO 2 , including the expansion of interlayer spacing, the emergence of Sn and SiOx indicated the reaction between Si and SnO 2 occurred during the ball milling process, while the generation of Si-O-Sn and Si-O-C bonds formed by Si integration connected the three components with intimate interfaces. Used as an anode for LIBs, the C/Si@SnO 2 electrode performed a favorable discharge capacity (919.21 mAh·g −1 at 0.1 A·g −1 ), the ultra-long cyclability after 1000 and 2000 cycles, impressive rate performance (269.87 mAh·g −1 at 5 A·g −1 ), and fast charging capability accompanying discharge capacity of 805.57 mAh·g −1 at 0.2 A·g −1 and charge capacity of 400.55 mAh·g −1 at 2 A·g −1 . In addition, the electrochemical impedance spectroscopy analysis showed that the graphitic carbon layer and porous Si layer improved the rapid Li + diffusion and transportation, which was beneficial to fast charging in LIBs. Our work provided a facile and green ball milling method to construct porous sandwich structured metal oxide/C composites with the introduction of Si, which can effectively increase the disordered structure of composite and also open up a new scheme of Si materials as an anode in the field of fast charging for LIBs.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2019
·Vol. 150
·期 3
·815-825
·
IF 2.372
Huang Yan-Feng,Zhang Lu,Ma Li,Li Ying,Zhong Chongli
Abstract Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were achieved using nanoparticle-encapsulated MOFs Fe 3 O 4 @HKUST-1 as both a precursor and a self-sacrificing template. Fe 3 O 4 @HKUST-1 was thermally converted into magnetic Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites in different atmosphere (N 2 and air). The resulting composites not only kept superparamagnetic characteristics, but also exhibited improved peroxidase-like catalytic activity and high stability when compared to the precursor Fe 3 O 4 @HKUST-1. The morphology, crystal structure, magnetic and porous properties of Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were characterized, and the kinetics parameters and the influence factors on the peroxidase-mimicking activity such as temperature, pH and H 2 O 2 concentration were evaluated. On account of the excellent peroxidase-like activity, the as-prepared Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were successfully used for the catalytic removal of methylene blue (MB) dye with H 2 O 2 oxidant. This work provides an effective way to fabricate highly reactive MOFs-derived biomimetic catalysts, which have potential applications in bioassays and pollutant degradation. Graphic Abstract Fe 3 O 4 @Cu/C and Fe 3 O 4 @CuO composites were achieved using Fe 3 O 4 nanoparticle-encapsulated HKUST-1 as self-sacrificial templates and demonstrated excellent peroxidase-like activity.
✓ 已验证
DOI
高影响因子