ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2020
·Vol. 28
·期 10
·12459-12473
·
IF 3.056
Guo Tongtong,Yang Shuang,Chen Yunning,Yang Lu,Sun Yingnan,Shang Qingkun
In this paper, the kinetic characteristics and cycle stability of Fe-complex/TiO 2 in the process of degradation of phenolic pollutants and reduction of heavy metal Cr(VI) were studied systematically. First, the structural characteristics and photocatalytic activities of Fe(III)-(8-hydroxyquinoline-5-carboxylic acid)-TiO 2 (Fe-HQC-TiO 2 ) nanoparticle to degrade phenolic pollutants and reduce Cr(VI) simultaneously had been investigated. Compared with the single degradation, the efficiency of synergistic degradation/reduction had been improved and the degradation/reduction rate had been obviously accelerated. In particular, the cyclic stability of Fe-HQC-TiO 2 photocatalyst decreased obviously when it was used to reduce Cr(VI) alone, but it could still keep above 90% after three cycles when it was used for reduction of Cr(VI) and degradation of phenol synergistically. Second, to Fe-HQS/TiO 2 nanoparticle or Fe-HQS/TiO 2 nanotube (HQS (8-hydroxyquinoline-5-sulfonic acid)), the synergistic degradation/reduction (2,4-dichlorophenol/Cr(VI)) efficiencies were always greater than those of a single degradation/reduction and the time was greatly reduced. All the results indicated that there were interactions between Cr(VI) and phenol or 2,4-dichlorophenol in the photocatalytic process. The possible mechanism of synergistic accelerated degradation of phenolic compounds and reduction of Cr(VI) was proposed by analyzing and testing the surface characteristics of photocatalyst and the properties of photocatalytic system during the synergistic degradation/reduction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2020
·
IF 5.774
Guo Yang,Jingwen Dong,Bo Xing,Sha Mo,Xiang Song,Xingyong Liu,Jigang Yuan
The Ni, Fe, and N-tridoped carbon catalyst was synthesized by a sequential impregnation method. The Fe oxides, Ni oxides, zero-valent Fe, N species and Fe-N x were simultaneously present on the surface of the catalysts. Both metal composition and N dopants enhanced the catalytic activity, and 89.0% of the methyl orange (MO) was removed over 4Ni2Fe@20NAC. The introduction of Ni resulted in the reduction of iron oxides and the generation of more zero-valent iron, which greatly improved the catalytic activity. The doping of N led to the formation of pyridinic N, graphitic N and Fe-N x species, which were beneficial to the catalyst activity and stability. The surface-bound OH and SO 4 – generated from the N-doped carbon played a predominant role in the degradation of MO. The catalyst recycling showed MO removal was about 80% over 4Ni2Fe@20NAC after the fifth running.
✓ 已验证
DOI
高影响因子
Materials Today Energy
·
2020
·
IF 5.604
Kuofeng Xu,Huayuan Bao,Chaoyun Tang,Kristina Maliutina,Fengjiao Li,Liangdong Fan
The development of non-platinum electrocatalysts for the quick oxygen reduction reaction (ORR) is highly desirable in electrochemical energy conversion technologies such as fuel cells and metal-air batteries. In this work, we synthesize Fe 3 O 4 /Fe–N–C-CNT (FeNC) using Fe 3+ adsorbed ZIF-8 as a chemical precursor that is obtained with a green and sustainable procedure. FeNC possesses impressive ORR activities, stability and selectivity over that of the commercial Pt/C electrocatalyst in alkaline media, and demonstrates a better peak power density of 118.05 mW cm −2 over that with Pt/C cathode and quicker reaction kinetics when integrated as air electrode catalyst into a primary zinc-air battery. In-depth investigation confirms that the presence of Fe 3 O 4 increases the wettability of carbon-based composite that promotes the adsorption of the dissolved O 2 in the electrolyte solution and extends the triple-phase boundary for ORR, and also protect the active site of Fe–N–C from poisoning. This work sheds light on a sustainable method to synthesize highly efficient non-precious metal-based electrocatalyst from metal-organic-framework precursors and understanding the reaction mechanism of the ORR process for efficient chemical energy to electricity conversion.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2020
·
IF 6.215
Gaoxia Mei,Lili Cui,Zhiyu Dou,Xingquan He
Developing robust dual-function oxygen electrode reaction catalysts is vital toward renewable/rechargeable energy systems but remains challenging. In this work, novel electrocatalytically active hybrid materials comprising Fe 0.5 Co 0.4 Ni 0.1 alloy nanoparticles-embedded N-doped carbon nanotubes , named CNTs@(Fe,Co,Ni)PP-T (where T denotes the pyrolysis temperature employed to prepare them), are developed by pyrolyzing the mixture of hyperbranched tri-metal (Fe, Co, Ni)-coordinated polyporphyrin-encapsulated carboxylic acid-functionalized carbon nanotubes and melamine . The materials are demonstrated to act as effective bifunctional oxygen electrode catalysts. Especially, the one generated at 800 °C, termed as CNTs@(Fe,Co,Ni)PP-800, has larger specific surface area, larger active surface area and better electrical conductivity than other as-obtained contrast materials. Undoubtedly, this material displays superior reactive activity for O 2 -associated electrochemical reactions in alkaline media, delivering more positive onset (0.988 V vs . RHE) and half-wave (0.837 V vs . RHE) potentials for the reduction of oxygen and a smaller overpotential (355 mV) at 10 mA cm −2 for the evolution of oxygen than its counterparts. In practical application, the CNTs@(Fe,Co,Ni)PP-800 based zinc-air battery (ZAB) achieves a small initial charge-discharge voltage gap of 0.69 V at 2 mA cm −2 and an outstanding cycling durability in 300 cycles of charge-discharge (in over 50 h), superior to the benchmark Pt/C+RuO 2 based ZAB under the identical testing conditions.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2020
·
IF 5.774
Longqian Xu,Linghui Zhao,Yunfeng Mao,Zhen Zhou,Deli Wu
Copper-iron bimetallic material shows a high reactive activity in dioxygen activation processes (DOAs) but presents a significant challenge for enhancing superoxide radical ( • O 2 − ) generation. In this study, a practical strategy was developed to enhance • O 2 − generation for BPA degradation using a zeolite-supported Cu-Fe bimetallic system (called Cu/Fe@zeolite), which was simply prepared by impregnation method. The results verified that the Cu(I) regeneration at the zeolite surface contributes • O 2 − generation and the H 2 O 2 that is further generated induces • OH production via a further Fenton reaction. In the reaction process, the initial generation of • O 2 − was primarily enhanced by the Cu(I) loaded onto the zeolite surface and the adsorbed BPA was easily degraded by the •OH. Under optimal operating conditions (i.e., Cu/Fe@zeolite = 3 g/L, Cu:Fe = 1:2, pH = 5, t = 120 min), it was found that 87% of BPA can be removed from wastewater. It is also important to note that the weak alkali buffering property of zeolite not only provides BPA adsorption sites under acidic conditions but also accelerates the precipitation efficiency for metallic ions and reduced the adverse effect of metallic residue on the effluent quality.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Lidong Kou,Jing Wang,Liang Zhao,Kai Jiang,Xinxin Xu
Conversion of waste sludge into biochar-based catalysts has been considered as a feasible alternative for sludge treatment, and dewatering of waste sludge is a key process for further treatment and disposal. In this study, KMnO 4 was used as both a chemical conditioner to assist Fe-rich sludge dewatering and a chemical modifier to incorporate Mn oxides into the biochar catalysts. Results showed that the sludge dewatering was substantially improved when KMnO 4 dosage was above 13% DS (dry sludge), and more than 99% of Mn was retained in the sludge cake. After pyrolysis of the sludge cake, a series of Mn,Fe-codoped biochar catalysts (assigned to x -Mn-FeBC) were obtained. The catalysts could activate peroxymonosulfate (PMS) well for complete removal of phenolic contaminants including phenol, bisphenol A (BPA) and 2,4-dichlorophenol (DCP) over a wide pH range (2.5–12) with the co-existence of water constituents. After 5 consecutive cycles, the catalytic performance of 13%-Mn-FeBC was decreased by half, but it could be fully recovered by simple calcination at 600 o C. It was proposed that radical and non-radical oxidation processes worked together for organic degradation, but non-radical pathways involving 1 O 2 oxidation and electron transfer between PMS and organic played more crucial roles. This study proposed a novel sludge treatment process by combining enhanced sludge dewatering with efficient catalyst preparation, and the as-prepared catalysts were promising in PMS activation and organic degradation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Zhiyan Huang,Pingxiao Wu,Chenhui Liu,Meiqing Chen,Shanshan Yang,Zhi Dang,Nengwu Zhu
Understanding the origin of high activity of graphene layers encapsulated Fe-N-C catalysts in Fenton-like reaction is critical, but still challenging for developing catalysts with high activity and durability. Therefore, we prepared a highly active Fe-N-C catalyst (Fe x Mn y -Fe@NCs) containing FeN 4 coordination to activate peroxymonosulfate (PMS) toward 4-aminobenzoic acid ethyl ester (ABEE) degradation, and revealed the multiple catalytic reaction sites by investigating the composition and the structure of the catalyst. The relationship between the catalytic degradation performance and multiple catalytic reaction sites was performed on the basis of both experiments and density functional theory (DFT) calculations. The catalytic performance of Fe 2 Mn 1 -Fe@NCs was found to show optimal catalytic degradation performance. Pyrrolic N served as adsorption site as well as singlet oxygen generation site to promote the catalytic degradation. Fe-pyridinic N-C acted as hydroxyl radical and sulfate radical generation site. Both singlet oxygen and superoxide radical were dominated the catalytic reaction. The insight achieved from this study may be further applied to other Fe-N-C catalysts design and further efficient organic pollution remediation.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Wenyi Gu,Xiaoyue Huang,Yunhao Tian,Min Cao,Liang Zhou,Yi Zhou,Jian Lu,Juying Lei,Yanbo Zhou,Lingzhi Wang,Yongdi Liu,Jinlong Zhang
Highly efficient removal of tetracycline (TC) has been achieved by cooperative adsorption of carbon and iron in a magnetic Fe/porous carbon hybrid (MagFePC) derived from MIL-101(Fe). The optimum hybrid material MagFePC-700 (obtained from MIL-101(Fe) carbonization at 700 °C had a good adsorption capacity for TC at a wide range of pH, and the highest adsorption capacity was up to 1301.24 mg g −1 at a pH of around 7, which was 6 times higher than that of activated carbon. In addition to TC, it also showed high adsorption capacity (>800 mg g −1 ) for oxytetracycline, chlortetracycline hydrochloride, and tetracycline hydrochloride. The porous carbon in MagFePC-700 was rich in meso- and micropores, which were conducive to the transport and enrichment of TC molecules. Especially, the Fe nanoparticles in the hybrid were found to contribute greatly to the adsorption, which were both the active site of adsorption and the active site of Fenton reaction. A multi-cycle experiment revealed that the MagFePC material was regenerated well through Fenton reaction, and the regeneration conditions were mild without adjusting the pH. Taken it all together, MagFePC-700 is a green and recyclable adsorbent for the removal of antibiotics from water owing to its high adsorption capacity, easy separation, and good reuse performance.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Ningjie Du,Ying Liu,Qiuju Li,Wei Miao,Dandan Wang,Shun Mao
Single-atom catalysts have drawn increasing attention in advanced oxidation due to their unique structure and significant promise in heterogeneous catalysis. Herein, single-atom iron anchored on nitrogen-doped carbon (SAFe-N-C) was synthesized with iron phthalocyanine (FePc) and metal-organic framework (ZIF-8). With thermal treatment and acid leaching, atomically-dispersed Fe-N x sites were successfully formed on the surface of N-C support derived from ZIF-8. The prepared catalyst was demonstrated to activate peroxydisulfate (PDS) for chloramphenicol (CAP) degradation. Compared with N-C, the SAFe-N-C shows 6 times enhanced removal efficiency (from 15.3% to 93.1%) for CAP. Moreover, the catalyst shows high catalytic activity in a wide pH range of 5 to 9 and good resistance to inorganic anions, in which a singlet oxygen-dominated process is found. This study reveals the role of single-atom site in singlet oxygen evolution and offers a new catalytic approach for selective removal of organic pollutants in complex water matrix.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Jingjing He,Yu Wan,Wenjun Zhou
Developing high-efficient hybrids carbon catalysts for PMS-based advanced oxidation process (AOPs) are crucial in the field of environmental remediation. In this work, novel carbon nanocubes (xFe‒N‒C) with three-dimensional porous structure and abundant well-dispersed FeN x sites were obtained via a skillful cage-encapsulated-precursor pyrolysis strategy. The as-synthesized xFe‒N‒C exhibited superb activity for phenol degradation by activating peroxymonosulfate (PMS). Besides, the catalytic system not only possessed good recycling performance, wide pH adaptation and relatively low activation energy, but also had high resistance to environmental interference. Singlet oxygen ( 1 O 2 ) dominated non-radical process was responsible for phenol degradation rather than traditional radical pathways. Impressively, the doping level of Fe could regulate FeN x contents in catalysts, and the catalytic activity of xFe‒N‒C was greatly enhanced with increasing FeN x contents. Based on density functional theory calculations (DFT), the introduction of FeN x sites regulated the electronic structure of catalysts. Such electron-deficient Fe center acted as electron acceptor to receive electrons transmitted by the adsorbed PMS , thus generating highly reactive 1 O 2 for rapid phenol oxidation. This work provides a new insight into the innovation in transition metal-nitrogen hybrid carbon catalysts and highlights the pivotal roles of FeN x sites in 1 O 2 generation during PMS activation process.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Zhe Li,Shudi Mao,Ying Yang,Zhuo Sun,Ran Zhao
Capacitive deionization (CDI) is considered one of the most promising desalination technologies for obtaining fresh water from saline water. In this work, we synthesized a hollow core–shell Co-MOF@Fe/Co-LDH (Co-Fe-LDH) material by developing a strategy to simultaneously grow Co/Fe-LDH on the surface of a Co-MOF precursor in situ. Owing to the increase in the specific surface area of the hollow structure and the Faradaic process of a layered double hydroxide (LDH), the Co-Fe-LDH material exhibits high electrical double layer (EDL) capacitance and pseudocapacitance, which significantly improves the salt adsorption of the material during CDI (34.2 mg/g in a 600 mg/L NaCl solution at 1.2 V). The adsorption for NaCl in this work is approximately 2.5 times the maximum salt adsorption capacity (SAC) of LDH materials applied in nonmembrane CDI (NMCDI). This work may provide a promising model for the application of hollow LDH materials that exhibit pseudocapacitance in CDI.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Zhihong Du,Yue Gong,Hailei Zhao,Yang Zhang,Sha Yi,Lin Gu
Exsolution of catalytic nanoparticles (NPs) from perovskites has arisen as a flexible method to develop high-performance functional materials with enhanced durability for energy conversion and catalytic synthesis applications. Here, we unravel the interface structure of the in situ exsolved alloy nanoparticles from the double perovskite substrate on the atomic scale. The results show that the Co–Fe alloy NPs exsolved topologically from the {100} facets terminations of the Sr2FeMo0.65Co0.35O6−δ (SFMC) double perovskite along ⟨100⟩ directions exhibiting the same orientation and identical crystal structure. The lattice planes of these two phases align and insert into each other at the interface, forming a smooth and continuous coherent connection. The presence of moiré patterns at the interface confirms the topological exsolution mechanism. The coherent interface can significantly reduce the interfacial energy and therefore stabilize the exsolved nanoparticles. Therefore, excellent and stable electrochemical performance of the NP-decorated SFMC perovskite is observed as the anode for solid oxide fuel cells. Our contribution promotes a fundamental understanding of the interface structure of the in situ exsolved alloy nanoparticles from perovskite substrate.
✓ 已验证
产品关联
DOI
PubMed
高影响因子