Scientific Reports
·
2020
·Vol. 10
·期 1
·1-12
·
IF 3.998
Akram Naeem,Guo Jia,Ma Wenlan,Guo Yuan,Hassan Afaq,Wang Jide
The exploration of advanced water treatment technologies e.g. heterogeneous photocatalysis is the most promising way to address organic pollution issues. Semiconductors based bimetallic photocatalysis with wide bandgap, have displayed splendid degradation performance in the UV light region, but their extension to the visible light/near infra-red region is still a matter of great concern. CuO, Co(OH) 2 , CoO and Co(OH) 2 /CuO nanocomposites were synthesized via simple co-precipitation method and further practiced for Rhodamine B (RhB) decomposition by introducing per-sulfate (PS) as a sacrificial agent. Results revealed that Co(OH) 2 /CuO catalyst had shown robust catalytic activity for RhB photodegradation (degradation time 8 min, k = 0.864 min −1 ) under light illumination, significantly less (12–60 times) than the other reported bimetallic catalysts. Catalyst also have verified excellent performance for a broader pH range (5–9) with excellent stability. Main reactive species responsible for the photocatalytic reaction were sulfate (SO 4 •− ) and superoxide (O 2 • ) radicals, duly verified by ESR and by using radical scavengers. With outstanding recycling abilities, this is probably the fewer successful attempt for RhB decolorization and can be highly favorable for effluent treatment by using the synergic effect of absorption and photodegradation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Yanqiao Xu,Ting Chen,Zhixiang Xie,Weihui Jiang,Lianjun Wang,Wan Jiang,Xiaojun Zhang
Understanding the surface characteristic-optical property relationship of Cu-In-Zn-S (CIZS) quantum dots (QDs) is necessary for tuning the optoelectronic performances, and the photoluminescence quantum yields (PLQYs) of CIZS QDs prepared in aqueous solution are still relative low compared with that of obtained in organic phase, which seriously restricts their applications. Herein, an efficient method was proposed to prepare CIZS/ZnS/PVP composites and their application in white light-emitting diodes (WLEDs) was investigated. CIZS QDs were synthesized through hydrothermal process with the assistance of ionic liquid (IL), which could enhance the PL performance and reduce the reaction time simultaneously. The effects of hydrothermal temperature and time on the phase composition, morphology, and optical properties of CIZS QDs were systematically investigated. The results showed that the BF 4 − anion played a crucial role in boosting the emission property of CIZS QDs owing to the effective reduction of dangling bonds on the surface of QDs, which induced by the corrosion of F − deriving from the decomposition of BF 4 − . The surface modulation led to the improvement of PLQY from 6.2% to 8.4%. In addition, the PLQY of QDs was further improved to 31.2% by coating with ZnS shell around CIZS cores. Furthermore, highly luminescent CIZS/ZnS/PVP composites were prepared to eliminate the aggregation-induced fluorescence quenching effect, which was beneficial to the application in WLEDs. Consequently, a WLED achieved the color rending index (CRI) of 87.2, correlated color temperature (CCT) of 4977 K, and luminous efficacy (LE) of 90.11 lm/W by using the orange-yellow CIZS/ZnS/PVP composites and green Lu 3 Al 5 O 12 :Ce 3+ phosphors as the color conversion layer, suggesting the potential for solid state lighting application.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2020
·
IF 3.28
Zongjie Zhang,Liangling Sun,Balaji Devakumar,G. Annadurai,Jia Liang,Shaoying Wang,Qi Sun,Xiaoyong Huang
In this paper, a series of Eu 3+ -activated double-perovskite Ca 2 LaTaO 6 (abbreviated as CLT: x Eu 3+ ; x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, and 0.8) red-emitting phosphors have been successfully synthesized via the conventional high-temperature solid-state reaction method. These samples were characterized by X-ray diffraction, Rietveld refinement , field-emission scanning electron microscope , elemental mapping, energy-dispersive spectrum, room-temperature photoluminescence , decay lifetimes, quantum efficiency, CIE color coordinates, and temperature-dependent emission spectra . Interestingly, under blue excitation into the 7 F 0 → 5 D 2 transition of Eu 3+ at 466 nm, the CLT: x Eu 3+ phosphors could emit bright red light corresponding to the 5 D 0 → 7 F J (J = 1, 2, 3, 4) transitions. Their luminescence properties have been investigated as a function of the Eu 3+ ions concentration . It was found that the CLT:0.4Eu 3+ sample exhibited the strongest emission intensity, and the concentration quenching effect was caused by the dipole-dipole interaction among Eu 3+ activators. Impressively, the emission intensity of the as-prepared CLT:0.4Eu 3+ phosphors was about 4.3 times higher than the commercial Y 2 O 3 :Eu 3+ red phosphors. Moreover, the CLT:0.4Eu 3+ sample had excellent CIE color coordinates of (0.665, 0.334) and supereminent color purity of 95.3%. Notably, the study on temperature-dependent emission spectra of the CLT:0.4Eu 3+ sample revealed its good thermal stability and color stability at high temperatures. These excellent photoluminescence properties of CLT:0.4Eu 3+ phosphors indicated their promising application potential in white light-emitting diodes as blue-light-excitable red phosphors.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Xuemei Yao,Menghuan Li,Bing Li,Chencheng Xue,Kaiyong Cai,Yanli Zhao,Zhong Luo
The strategic combination of photodynamic therapy and chemotherapy has emerged as a promising treatment option for various tumor indications, which not only expands our understanding of each individual modality but also reveals new opportunities to achieve superadditive benefit via exploring their internal synergy rather than simple mixing. In this study, dual-emissive upconverting nanoparticle (UCNP) was employed to bridge the two treatment regimens to synergistically reinforce the therapeutic efficacy. The UCNP-based drug delivery nanoplatform was first co-loaded with 1,8-dihydroxy-3-methylanthraquinone (DHMA) photosensitizers and UV-activatable camptothecin prodrug (NBCCPT) and then complexed with biofunctional β-cyclodextrin species (β-CD-PEG-LA) via highly specific host-guest interactions to cap the camptothecin prodrug conjugated on the nanoparticle surface. The supramolecularly attached β-CD-PEG-LA could not only enhance the aqueous dispersity of the nanocarriers and prevent DHMA leakage, but also imbues targeting effect against asialoglycoprotein receptor-overexpressing tumor cells. The UCNP core would convert the NIR excitation (980 nm) into localized UV (360 nm) and visible (480 nm) emissions, of which the former would cleave the nitrobenzene linker to restore the cytotoxicity of CPT while the latter could excite the photosensitizer to generate reactive oxygen species (ROS). In addition to the photodynamic damage, the light-generated ROS could also facilitate the endo/lysosomal escape of the endocytosed nanoparticles and improve the overall antitumor potency in a synergistic manner.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2020
·
IF 1.943
Tongtong Liu,Yawen Wang
Platinum loaded BiOBr with iodine doping photocatalyst (Pt/I-BiOBr) was synthesized to further improve the photocatalytic activity of BiOBr. The photocatalytic test showed the bisphenol A degradation efficiency of Pt/I-BiOBr under visible light was about 93% within 20 min, about 5.8, 1.5 and 1.3 times that of BiOBr, iodine doped BiOBr and platinum loaded BiOBr, respectively. The composition, morphology, optical property and dominant active radical were investigated. Based on the results, a possible mechanism was proposed. Iodine doping and platinum loading played a synergetic effect on broadening the visible light absorption range and increasing the photo-induced carrier separation efficiency of BiOBr.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Min Chen,Honghong Wang,Xueyan Chen,Fei Wang,Xiaoxiao Qin,Changbin Zhang,Hong He
Photocatalysis is regarded as a promising method for indoor formaldehyde (HCHO) removal, and there remains a strong demand for the development of highly efficient photocatalysts for HCHO oxidation under visible light. Herein, by grafting nano CuO x clusters onto TiO 2 , the higher performance is achieved over Cu-TiO 2 for the photocatalytic oxidation of HCHO under visible light compared with the typical photocatalysts N-TiO 2 and g-C 3 N 4 . It is found that the presence of water greatly promotes the activity of HCHO oxidation on Cu-TiO 2 . The characterization results indicate that the CuO x clusters on TiO 2 exhibit high redox reversibility between Cu (II) and Cu (I) and greatly facilitate the migration of electrons. The mechanism of photocatalytic oxidation of HCHO was explored by using in situ DRIFTS measurements and DFT calculations. It is shown that HCHO is firstly oxidized to dioxymethylene (DOM), and then DOM is transformed into formate species under visible light irradiation. DFT calculations results indicate that the OH species are responsible for surface formate decomposition, which is the rate-determining step, while O 2 − radical is not active in formate decomposition. Our findings improve the understanding on the photocatalytic oxidation of HCHO, and the Cu-TiO 2 catalyst is a promising candidate for practical application in indoor air purification.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Yuwei Ma,Guangtong Hai,Dimberu G. Atinafu,Wenjun Dong,Rongjie Li,Changmin Hou,Ge Wang
Carbon -MoS 2−x @CdS (C-MoS 2−x @CdS) core-shell nanostructures with controlled surface sulfur (S) vacancies were prepared via a glucose assisted hydrothermal growth method. The glucose acted as a reducing agent of C-MoS 2−X to partially reduce Mo 4+ ions to Mo 3+ and served as a carbon source to insert the amorphous carbon into the layered MoS 2−X simultaneously. The presence of Mo 3+ result in the surface S-vacancies, which can provide more additional active sites and enhance the photocatalytic performance. Moreover, the inserted carbon in layered MoS 2−X enhanced the electron mobility and decreased the resistance electron transfer. Density functional theory (DFT) calculation confirmed that the surface S-vacancies and the amorphous carbon increase the projected density of states at the conduct band edge, which could enhance the photo-absorption and photo-responsibility. The result is consistent with the photocatalytic H 2 production experiment . C2-10%MoS 2−x @CdS presented a high H 2 evolution rate of 61,494 μmol h −1 g −1 under visible light irrigation (λ ≥ 420 nm), which is 1.98 times and 158 times higher than that of sample without S-vacancies (10%MoS 2 @CdS) and pure CdS, respectively.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE CHEMICAL LETTERS
·
2020
·
IF 4.632
Yongjie Li,Wei Xiang,Tao Zhou,Mingjie Huang,Chen Wang,Xiaohui Wu,Juan Mao,Penghua Wang
In this study, a carbon quantum dots modified maghemite catalyst (CQDs@ γ -Fe 2 O 3 ) has been synthesized by a one-step solvothermal method for efficient persulfate (PDS) activation under visible light irradiation. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy (UV–vis DRS) characterization indicated that the formation of heterojunction structure between CQDs and γ -Fe 2 O 3 effectively reduced the catalyst band gap ( E g ), favoring the separation rate of electrons and holes, leading to remarkable efficient sulfamethoxazole (SMX) degradation as compared to the dark-CQDs@ γ -Fe 2 O 3 /PDS and vis- γ -Fe 2 O 3 /PDS systems. The evolution of dissolved irons also demonstrated that CQDs could accelerate the in-situ reduction of surface-bounded Fe 3+ . Electron paramagnetic resonance (EPR) and radical scavenging experiments demonstrated that both OH and SO 4 − were generated in the reaction system, while OH was relatively more dominant than SO 4 − for SMX degradation. Finally, the reaction mechanism in the vis-CQDs@ γ -Fe 2 O 3 /PDS system was proposed involving an effective and accelerated heterogeneous-homogeneous iron cycle. CQDs would enrich the photo-generated electrons from γ -Fe 2 O 3 , causing efficient interfacial generation of surface-bond Fe 2+ and reduction of adsorbed Fe 3+ . This visible light induced iron cycle would eventually lead to effective activation of PDS as well as the efficient degradation of SMX.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2020
·
IF 16.683
Qiao Wang,Peng Wang,Peng Xu,Yang Li,Jiajun Duan,Guangshan Zhang,Limin Hu,Xiaojing Wang,Wen Zhang
The visible-light responsive hybrid catalysts (Zn 0.94 Fe 0.04 S/g-C 3 N 4 or ZCN) were synthesized by a rapid microwave hydrothermal method. Our results showed that the deposition of Fe-doped ZnS onto g-C 3 N 4 sheets prevented the aggregation of Zn 0.94 Fe 0.04 S and increased the surface area for mass transfer and light absorption. The highest degradation rate of p -nitrophenol (PNP) was 96.0% and the total organic carbon removal rate was 55.4% after 60-min simulated solar light irradiation on ZCN with Fe doping and g-C 3 N 4 loading ratios of 0.04 and 0.20, respectively. Hydroxyl radical played a dominant role in PNP degradation, which was primarily attributed to the photo-Fenton reactions. The PNP degradation pathway involved denitration and hydroxylation reactions according to the Density Function Theory calculations and HPLC-MS/MS results. The QSAR analysis indicated that the toxicity of most intermediates was lower than PNP. This study develops novel materials with superior photocatalytic activity for elimination of refractory organic pollutants in wastewater.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2020
·
IF 3.28
Muyao Wang,Yanjie Zhang,Zeqing Hu,Jinghui Zhang
The single-phased white light-emitting Ca 4 (PO 4 ) 2 O: Tm 3+ , Tb 3+ , Eu 2+ phosphors with tunable color emission were synthesized by solid-state reaction method. The photoluminescence properties, crystal structure, decay time and cross-relaxation from Tm 3+ to Eu 2+ were investigated in detail. Under excitation of 352 nm, Tm 3+ singly doped Ca 4 (PO 4 ) 2 O (denoted as TTCP) phosphors exhibited an intense emission peak at 458 nm attributed to 1 D 2 → 3 F 4 transition of Tm 3+ ions and a broad emission peak in the range of 400–411 nm ascribed to oxygen vacancies in TTCP host. The emission intensity of oxygen vacancies decreases along with the increasing of Tm 3+ doping concentration due to the substitution of Ca 2+ and oxygen vacancies sites by Tm 3+ ions. For Tm 3+ and Eu 2+ co-doped TTCP phosphors, the blue emission intensity (458 nm) of Tm 3+ ions obviously decreased and the red emission intensity (624 nm) with of Eu 2+ ions increased due to Eu 2+ doping. The cross-relaxation from Tm 3+ to Eu 2+ ions was further demonstrated by the decay times of TTCP: 0.03 Tm 3+ , yEu 2+ phosphors monitoring the emission peak at 458 nm. Further, Tb 3+ ions were also introduced in the TTCP phosphor for a green emission and Tb 3+ singly-doped TTCP phosphor displays the emission peaks at 488 nm and 545 nm due to the typical 5 D 4 → 7 F 5 and 5 D 4 → 7 F 5 transition of Tb 3+ ions, respectively. Finally, TTCP: Tm 3+ , Tb 3+ , Eu 2+ phosphor was obtained and emitted the white light with the blue (458 nm), green (545 nm), and red (603 nm) emission bands under excitation of 352 nm. Especially, white light with tunable color temperature (3000 K–6000 K) and high color rendering index (Ra > 90) can be easily acquired. A neutral white light with high color rendering index (Ra 91.1) can be achieved for the TTCP: 0.03 Tm 3+ , 0.25 Tb 3+ , 0.004Eu 2+ phosphor.
✓ 已验证
产品关联
DOI
高影响因子
OPTIK
·
2020
·
IF 2.187
Mingjing Bian,Hongyan Zhang,Jun Zhang,Zhijun Li
The influence of post-annealing on optical properties of Eu-doped ZnO (ZnO:Eu 3+ ) microsphere synthesized by hydrothermal method has been studied. The intrinsic deep defect emission of ZnO and the transition emission of both 5 D 0 → 7 F 1 and 5 D 0 → 7 F 2 related to Eu 3+ have been observed under excitation at 325 nm. The photoluminescence (PL) spectra reveal that ZnO annealed in N 2 is more favorable for Eu 3+ being doped into ZnO, which is helpful to greatly enhance the red light emission of ZnO:Eu 3+ . Alkaline conditions are more conducive to the formation of intrinsic deep defects in ZnO lattice, but they are not so conducive to the doping of Eu 3+ ions into ZnO lattice. From Gaussian deconvolution analysis of PL spectrum for ZnO:Eu 3+ , it can be seen that intrinsic defects of ZnO in N 2 atmosphere may efficiently assist energy transfer from ZnO host to Eu 3+ ions to enhance Eu 3+ intrinsic red light emission. There are blue light (446 nm), green light (525 nm) and stronger red light (618 nm) which are simultaneously obtained. This work could pave a way for high performance of white light emission application.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 6
·4822-4835
·
IF 2.22
Zhou Nan,Tan Junjie,Li Xi,Wang Lu,Jin Chenglong,Chen Ming,Yu Zhengsong,Liang Yani,Qiu Zhidong,Li Wenlong,Dong Yulin,Xie Zhizhong,Lin Yawei,Qu Deyu,Zhang Chaocan
A series of Bi 5 O 7 I/MIL-53(Fe) (BOI/MIL- w ) composites were successfully prepared by a facile in-situ solvothermal approach. The matched energy bands enabled Bi 5 O 7 I and MIL-53(Fe) to form a Z-scheme heterojunction which resulted in an efficient separation of the photo-induced electron–hole pairs. The photocatalytic activity of BOI/MIL- w was evaluated by the degradation of Rhodamine B (RhB) in water under the visible light irradiation. Compared with Bi 5 O 7 I, photocatalytic performances of BOI/MIL- w notably boosted. When the content of added MIL-53(Fe) was 3 wt%, BOI/MIL-3 presented the highest activity with a degradation efficiency of 99.7% only after 60 min of irradiation. The reaction rate constant k could reach 0.0992 min −1 which was nearly 12.6 times as high as that of Bi 5 O 7 I. Moreover, BOI/MIL- w had a good stability and reusability, which could ensure its practical application. Trapping experiments confirmed that h + and ·O 2 − were the dominant active species during the photocatalytic process, and further demonstrated the formation of the Z-scheme heterojunction facilitated the photocatalytic performance of BOI/MIL- w .
✓ 已验证
产品关联
DOI
高影响因子