JOURNAL OF CATALYSIS
·
2021
·
IF 7.92
Huiyuan Cheng,Zihao Fan,Xuemei Wu,Manman Feng,Wentao Zheng,Guangping Lei,Xiangcun Li,Fujun Cui,Gaohong He
Single-atom catalysts (SACs) with well-defined active sites provide an efficient route for catalyzing CO 2 reduction reaction (CO 2 RR). Although enormous attention has been focused on metal-N x moieties, understanding the effect of metal-C coordination and engineering of the hybrid metal-N/C sites have rarely been reported. Herein, we fabricated Co SACs with tunable isolated Co-N 5-x C x ( x = 1, 2, 3) sites supported on porous carbon frameworks. Benefiting from the difference in electronegativity of the coordinated N and C atoms, the CO Faradaic efficiency (FE CO ) enhanced considerably from 54% to 76% and 92% at −0.8 V vs . RHE for Co-N 4 C 1 , Co-N 3 C 2 , and Co-N 2 C 3 , respectively. Further density functional theory (DFT) calculations uncover that the increased ratio of Co-C coordination induced electron enrichment of Co atoms and upper-shift the d -band center to near Fermi level, and thus favorably promotes the electron-donating ability of Co centers and strengthens the adsorption of *COOH.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2021
·Vol. 13
·期 19
·3384
·
IF 4.329
Tianping Zhang,Shun Yao,Lu Wang,Weijun Zhen,Ling Zhao
Both vulcanization reaction and CO2plasticization play key roles in the temperature rise foaming process of silicone rubber. The chosen methyl-vinyl silicone rubber system with a pre-vulcanization degree of 36% had proper crosslinked networks, which not only could ensure enough polymer matrix strength to avoid bubble rupture but also had enough dissolved CO2content in silicone rubber for induced bubble nucleation. The CO2diffusion and further vulcanization reaction occur simultaneously in the CO2plasticized polymer during bubble nucleation and growth. The dissolved CO2in the pre-vulcanized silicone rubber caused a temperature delay to start while accelerating further vulcanization reactions, but the lower viscoelasticity caused by either CO2plasticization or fewer crosslinking networks was still the dominating factor for larger cell formation. There was a sudden increase in elastic modulus and complex viscosity for pre-vulcanized silicone rubbers at higher temperature because of the occurrence of further vulcanization, but CO2plasticization reduced the scope of change of rheological properties, and the loss factor was close to 1 around 170 °C, which is corresponding to the optimum foaming temperature. The foamed silicone rubber had a higher cell density and smaller cell size at a higher temperature rising rate, which is due to higher CO2supersaturation and faster vulcanization reaction. These results provide some insight into the coupling mode and effect of CO2plasticization and vulcanization for regulating cell structure in foaming silicone rubber process.Keywords:methyl-vinyl silicone rubber;temperature rise foaming process;vulcanization reaction;CO2plasticization;rheological property;cell morphology
✓ 已验证
DOI
PubMed
高影响因子
Molecular Catalysis
·
2021
·
IF 5.062
Jing Zhao,Hucheng Zhang,Haiyan Wang,Jianji Wang
A highly attractive aim is to turn CO 2 into useful chemicals selectively and efficiently, but it still retains great challenging to understand the relations between catalytic performances and interface properties. Here, we report an alternative solution to relate the catalytic activity with the strengths of Lewis acids and bases on the Pd-CoO x interfaces. CoO∙TiO 2 /TiO 2 and CoO x /TiO 2 possess the wide spectrum of Lewis acid/base centres, and give the low selectivity and conversion. The introduction of Pd can focus them on the intrinsic centres, and makes Pd-CoO∙TiO 2 /TiO 2 and Pd-CoO x /TiO 2 represent the ideal catalysis. With temperature-programmed desorptions of CO 2 , CO and NH 3 , it is evidenced that the catalytic hydrogenations of CO 2 to CO, CH 4 and CH 3 OH depend on the cooperation of the Lewis acidic/alkaline centres on the interfaces. The studies provide guidelines for rational design and synthesis of heterogeneous catalysts including but not limited to CO 2 hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Huang Ouyang,Kunpeng Song,Jing Du,Zhen Zhan,Bien Tan
The weak physical adsorption of CO 2 in porous organic polymers (POPs) leads to the low utilization of CO 2 in catalysis, calling for the need to develop materials to ensure higher adsorption of CO 2 to achieve high conversion efficiency. In this regard, hydrazine (HZ) was successfully introduced into metalloporphyrin-based hypercrosslinked polymers (HCPs) by post-modification to create abundant CO 2 chemisorption sites in structures for efficient adsorption (Qst value up to 34.7 kJ/mol) and chemical conversion of CO 2 under ambient conditions. The HZ-modified material (HCP-TPP-Co-HZ) exhibits high catalytic performance for different molecular sizes of epoxide substrates with excellent yields (reaching 98 % of propylene oxide), much superior than that of HCP-TPP-Co-SO 3 H (64 %), which can be ascribed to the abundant chemisorption sites for CO 2 reactants. Moreover, HCP-TPP-Co-HZ has good stability and shows excellent recycling performance (more than 5 times) for the coupling of CO 2 with substituted epoxides at room temperature and atmospheric pressure. This strategy to introduce amine groups as CO 2 chemisorption sites has been demonstrated to be a new pathway for the design of efficient HCPs catalysts for chemical conversion of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
Journal of CO2 Utilization
·
2021
·
IF 7.132
Ye Qu,Yanglin Chen,Jianmin Sun
CO 2 utilization plays an important role in rational use of carbon resources and reduction of carbon emissions. It is still a challenge to achieve efficient CO 2 utilization by amino acid ionic liquids (AAILs) under room temperature and atmospheric pressure with cocatalyst- and solvent-free conditions. Herein, the newly developed AAILs including 1,1,3,3-tetramethylguanidine cation ([HTMG] + ) together with both amino acid and halogen as anions, were simply synthesized by neutralization reaction. Under mild conditions (30 °C, 20 h and 1 MPa CO 2 ), the cycloaddition reaction of CO 2 and propylene oxide could be efficiently catalyzed by [HTMG][His][I] with 99 % propylene carbonate yield and selectivity in the absence of additional solvent and cocatalyst. Notably, even at room temperature and atmospheric pressure for 72 h, [HTMG][His][I] also displayed 96 % yield and 99 % selectivity due to the cooperation of [HTMG] + , [His] 2– and [I] – . Meanwhile, [HTMG][His][I] performed excellent universality of various epoxides and reusability. Based on the characterization results of 1 H and 13 C NMR, it was verified that propylene oxide and CO 2 were simultaneously activated by the functional groups in [HTMG][His][I]. Hence, the reaction mechanism for CO 2 cycloaddition with epoxide catalyzed by [HTMG][His][I] was proposed. This work provided a simple strategy to prepare sustainable AAILs for efficient CO 2 utilization under very mild conditions of room temperature and atmospheric pressure (even the low CO 2 concentration at simulated flue gases).
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2021
·Vol. 12
·期 1
·1-10
·
IF 14.919
Sayed Mahmoud,Xu Feiyan,Kuang Panyong,Low Jingxiang,Wang Shengyao,Zhang Liuyang,Yu Jiaguo
Solar conversion of CO 2 into energy-rich products is one of the sustainable solutions to lessen the global energy shortage and environmental crisis. Pitifully, it is still challenging to attain reliable and affordable CO 2 conversion. Herein, we demonstrate a facile one-pot approach to design core-triple shell Mn, C-codoped ZnO hollow spheres as efficient photocatalysts for CO 2 reduction. The Mn ions, with switchable valence states, function as “ionized cocatalyst” to promote the CO 2 adsorption and light harvesting of the system. Besides, they can capture photogenerated electrons from the conduction band of ZnO and provide the electrons for CO 2 reduction. This process is continuous due to the switchable valence states of Mn ions. Benefiting from such unique features, the prepared photocatalysts demonstrated fairly good CO 2 conversion performance. This work is endeavoured to shed light on the role of ionized cocatalyst towards sustainable energy production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of CO2 Utilization
·
2021
·
IF 7.132
Xiaoyue Huang,Yan Hu,Liang Zhou,Juying Lei,Lingzhi Wang,Jinlong Zhang
As a greenhouse gas, CO 2 is also a rich carbon resource. Using sunlight to reduce CO 2 to usable substances through photocatalysis can alleviate the greenhouse effect and realize energy recycling. Herein, CuS nanoparticles are grown in situ on the surface of inverse opal g-C 3 N 4 by a one-step hydrothermal method. The inverse opal structure can increase the specific surface area of the material, and CuS can be used as the cocatalyst to accept photo-generated electrons on the conduction band of g-C 3 N 4 , thereby promoting the separation and transfer of photo-generated charges. And the interfacial charge transfer mechanism of CuS further improves the separation efficiency of photogenerated electrons and holes. The photocatalytic reduction of CO 2 activity of the prepared catalyst is greatly improved. The CO yield reaches 13.24 μmol g −1 h −1 . A new strategy is provided to develop artificial photosynthesis for reduction of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2021
·
IF 5.706
Yankai Liu,Ruinian Zhou,Jianyu Qu,Feng Han,Shuai Zhang,Xingliang Xu
Upgrading carbon dioxide (CO 2 ) into valuable products is a highly promising strategy of artificial carbon cycle. In this study, a series of in situ reduced CuMgAl layered double hydroxides (R-CuMgAl-LDHs) composites were synthesized, in which Cu nanoparticles were effectively dispersed and anchored on MgAl-LDHs with formation of Cu + and Cu 0 species. The optimized R-Cu 1.5 Mg 1.5 Al 1 -LDH exhibited excellent catalytic performance for the carboxylative cyclization of 2-methyl-3-butyn-2-ol with CO 2 (turnover number of 243) under mild conditions. The layered structure of LDH stabilized the active Cu species with high dispersion, enhancing the catalytic efficiency of this carboxylative cyclization reaction. Simultaneously, the dual-activation of both CO 2 and propargylic alcohol by Cu 0 /Cu + species generated on the surface of LDH contributed significantly to the catalytic efficiency enhancement. Furthermore, R-Cu 1.5 Mg 1.5 Al 1 -LDH catalyzed the reaction of a wide range of terminal or internal propargyl alcohols with CO 2 , yielding various functionalized α-alkylene cyclic carbonates. Finally, a reasonable reaction mechanism was put forward according to the comprehensive analysis.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Xin Tian,Chaohe Zheng,Haibo Zhao
The current study investigates Ce-modified SrFeO 3- δ oxygen carriers for oxidative dehydrogenation (ODH) of ethane coupled with CO 2 splitting in a chemical looping manner. During 39 cycles of redox testing over the sample of 0.2Ce/SrFeO 3 , up to 29% ethane conversion and 82% ethylene selectivity are achieved, and the CO generation in the subsequent CO 2 splitting step is 0.25 mmol/g. XPS characterization results indicate decreased Fe 2+ /(Fe 3+ +Fe 4+ ) ratio as well as increased active oxygen species proportion on the near-surface of Ce-modified samples, which are responsible for the improved activity of the 0.2Ce/SrFeO 3 in ethane ODH reaction. DFT calculations further reveal that the increased ODH activity of 0.2Ce/SrFeO 3 is due to the lower surface oxygen vacancy formation energy upon Ce promotion. Moreover, the higher resistance of lattice oxygen diffusion from the bulk to the surface is the main reason for the superior ethylene selectivity attained by the CO 2 -regenerated sample than that by O 2 regeneration.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2021
·Vol. 32
·期 8
·2107349
·
IF 18.808
Mun Kyoung Kim,Hojeong Lee,Jong Ho Won,Woohyeong Sim,Shin Joon Kang,Hansaem Choi,Monika Sharma,Hyung-Suk Oh,Stefan Ringe,Youngkook Kwon,Hyung Mo Jeong
Electrochemical carbon dioxide reduction reaction (CO 2 RR) is a promising approach to mitigate CO 2 concentration and generate carbon feedstock. Recently, the (sub-)nanometer design of catalyst structures has been revealed as an efficient means to control the reaction process through the local reaction environment. Herein, the synthesis of a novel tin oxide (SnO x ) nanoparticle (NP) catalyst with highly controlled sub-nanoscale interplanar gaps of widths <1 nm (SnO x NP-s) is reported via the lithium electrochemical tuning (LiET) method. Transmission electron microscopy (TEM) and 3D-tomo-scanning TEM (STEM) analysis confirm the presence of a distinct segmentation pattern and the newly engineered interparticle confined space in the SnO x NP-s. The catalyst exhibits a significant increase in CO 2 RR versus hydrogen evolution selectivity by a factor of ≈5 with 20% higher formate selectivity relative to pristine SnO 2 NPs at −1.2 V RHE . Density functional theory calculations and cation-size-dependent experiments indicate that this is attributable to a gap-stabilization of the rate-limiting *OCHO and *COOH intermediates, the formation of which is driven by the interfacial electric field. Moreover, the SnO x NP-s exhibits stable performance during CO 2 RR over 50 h. These results highlight the potential of controlled atomic spaces in directing electrochemical reaction selectivity and the design of highly optimized catalytic materials.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Qinwei Zhang,Ruinian Xu,Ning Liu,Chengna Dai,Gangqiang Yu,Ning Wang,Biaohua Chen
In this work, a Ni-supported CeO 2 -Al 2 O 3 catalyst, called NiCeAl-RMO (reduced metal-oxide), was prepared via air calcination and H 2 reduction of NiCeAl-LDH (layered double hydroxide). The NiCeAl-RMO catalyst shows superior CO 2 methanation activity, especially at low temperature (250 °C), and it performed 78.6% CO 2 conversion with ∼ 100% CH 4 selectivity. Compared with NiAl-RMO, the NiCeAl-RMO catalyst prepared via the Ce-doping strategy has significantly improved CO 2 methanation activity. Characterizations revealed that Ce doping would increase the amount of active Ni 0 species, cause a large number of oxygen vacancies, and generate new moderate basicity sites on the catalyst. In addition, in situ DRIFTS found that, unlike the RWGS + CO methanation mechanism over NiAl-RMO, the CO 2 methanation mechanism over NiCeAl-RMO followed the formate pathway by generating bidentate carbonate species, which was revealed as a key intermediate for enhancing the low-temperature activity of CO 2 methanation.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Jingjing Li,Wen-Yan Zan,Hongxing Kang,Zhengping Dong,Xiaoming Zhang,Yixiong Lin,Yue-Wen Mu,Fengwei Zhang,Xian-Ming Zhang,Jing Gu
For metal-free nitrogen(N)-doped carbon catalysts, diverse N-bearing species embedded in the carbon framework are generally regarded as chemical promoters that can upgrade their catalytic performance for CO 2 electroreduction reaction (CO 2 RR). However, it is still a controversy as to which N species plays a dominant role. Herein, a type of large surface area (371 m 2 /g), N-rich (11.0 wt%) graphene-like carbon electrocatalyst (NG-1000) is fabricated via facile pyrolysis from a precursor composite of dicyandiamide and phthalocyanine. The N-species in the NG-T (T = 700–1000 °C) can be fine-tuned, thus facilitating differentiating functions of the various N-species. Based on the comprehensive analysis of original Pc/CNTs and NG-T catalysts, we identified that the C atoms next to the graphitic-N species in NG-1000 serves as the main active species for CO 2 RR. In addition, such a non-metal based electrocatalyst is capable of achieving an excellent selectivity of 95.0 % at −0.72 V versus RHE to convert CO 2 into CO, with a CO current density of 9.07 mA cm −2 , comparable to the state-of-the-art metal-based electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子