文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4093至4104个,产品总数4,488个

切换升序
Cu
CARBOHYDRATE POLYMERS · 2020 · IF 7.182

Multiple active sites cellulose-based adsorbent for the removal of low-level Cu(II), Pb(II) and Cr(VI) via multiple cooperative mechanisms

Qi Wu,Hui He,Hang Zhou,Fei Xue,Hongxiang Zhu,Shile Zhou,Lei Wang,Shuangfei Wang

A novel multiple active sites cellulose-based adsorbent (MCC/TEPAA-BCTTC) with a high density of multiple active adsorption sites (N, O, S) was prepared by using epichlorohydrin cross-linking microcrystalline cellulose (MCC) with tetraethylenepentamine (TEPA), followed by grafting with bis(carboxymethyl) trithiocarbonate (BCTTC). It was shown that the removal rates of MCC/TEPAA-BCTTC for Pb(II) (1 mg/L), Cu(II) (3 mg/L) and Cr(VI) (1 mg/L) reached 100 %, 98 % and 99 %, respectively, and the remaining concentration after adsorption reached the United States Environmental Protection Agency (US EPA) standards for Pb(II) and Cu(II) and the China integrated wastewater discharge standard for Cr(VI). These results indicate that the high removal rate of MCC/TEPAA-BCTTC for removing anionic and cationic heavy metal ions in low-concentration mixed heavy metal ions environments was mainly due to the high density of multiple adsorption sites that act via multiple cooperative mechanisms.

CAS / MDL: 9004-34-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2019 · IF 5.155

Surface co-modification with highly-dispersed Mn & Cu oxides of g-C3N4 nanosheets for efficiently photocatalytic reduction of CO2 to CO and CH4

Xinxin Zhang,Kang Hu,Xuliang Zhang,Wajid Ali,Zhijun Li,Yang Qu,Hao Wang,Qingyang Zhang,Liqiang Jing

In this work, an in-situ way has been developed to achieve the co-modification of highly-dispersed Mn and Cu oxides to g-C 3 N 4 nanosheets for efficient CO 2 reduction. The Mn & Cu amount-optimized nanosheets exhibit the improved photocatalytic activity for CO 2 reduction to CO and CH 4 both by 3 times compared with the generally-bulk g-C 3 N 4 , mainly attributed to the nanosheet structure and to the roles of modified Mn and Cu oxides. Based on the transient-state surface photovoltage responses, transient-state photoluminescence spectra, and electrochemical measurements, it is confirmed that the modified Mn and Cu oxides could respectively capture the photogenerated holes and electrons, and provide the catalytic functions for water oxidation and CO 2 reduction. Remarkably, the simultaneous introduction of Mn and Cu oxides shows an obvious synergistic effect on the improvement of photocatalytic activity for CO 2 reduction. This work provides a feasible way to synthesize high-activity g-C 3 N 4 -based photocatalysts for energy production.

CAS / MDL: 108-80-5 108-78-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2019 · IF 6.361

Ultrahigh-flux (>190,000 L·m−2h−1) separation of oil and water by a robust and durable Cu(OH)2 nanoneedles mesh with inverse wettability

Ruixia Yuan,Jincheng Liu,Zhijun Li,Yanguang Chen,Zhaohui Wang,Zhanjian Liu,Guolin Jing,Yanji Zhu,Huaiyuan Wang

Single-stage oil/water separation membranes usually suffer from weak chemical stability, susceptible mechanical damage and relatively low permeating flux, and the sophisticated preparation processes also limit their massive utilization. In this work, Cu(OH) 2 nanoneedles coated copper mesh (CM) is prepared by simple and eco-friendly anodic oxidation at a current density of 4 mA/cm 2 for 6 min, which is the most efficient route reported so far. The mesh exhibits outstanding superhydrophilicity and underwater superoleophobicity towards various oils with contact angles up to 164.9°, achieving superior oil/water separation efficiency of above 99.5% and ultrahigh permeating flux of 191 160 L·m −2 h −1 solely driven by gravity. Impressively, the Cu(OH) 2 /CM demonstrates excellent chemical stability and anti-fouling performance when exposed to acidic and strongly alkaline solutions, saturated NaCl solution and various organic solvents . High durability to withstand mechanical challenges, e.g. high-power sonication and sand abrasion, is experimentally confirmed owing to strong cohesional strength of Cu(OH) 2 nanoneedles on CM surface. Importantly, the Cu(OH) 2 /CM exhibits favorable long-term recyclability with stable microstructure morphologies even after 50 cycles. These distinct advantages endow the Cu(OH) 2 /CM to be an ideal candidate to efficiently separate oil pollutants from water. The oil/water separation mechanisms are proposed based on the concept of intrusion pressure.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SOLAR ENERGY MATERIALS AND SOLAR CELLS · 2019 · IF 6.019

Preparation of novel microencapsulated phase change material with Cu-Cu2O/CNTs as the shell and their dispersed slurry for direct absorption solar collectors

Bin Xu,Chenghua Chen,Jing Zhou,Zhongjin Ni,Xiaochun Ma

In this study, a novel microencapsulated phase change material paraffin@Cu-Cu 2 O/CNTs was successfully prepared by hydrothermal reduction and in situ deposition method , in which paraffin as the core, Cu, Cu 2 O and carbon nanotubes (CNTs) as the shell. SEM and TEM results proved that the microcapsules have a core-shell structure, the CNTs were irregularly wrapped on the shell, and the diameter of the microcapsules was about 600-800 nm. The melting temperature and latent heat of the paraffin@Cu-Cu 2 O/CNTs microcapsules were 61.17 °C and 81.31Jg -1 , respectively, and the encapsulation rate of the microcapsules was calculated to be 41.53% from the results of the DSC measurement. Due to the shell material, the paraffin@Cu-Cu 2 O/CNTs microcapsules displayed excellent thermal stability, its thermal decomposition temperature is increased by 97 °C compared to paraffin. Moreover, the paraffin@Cu-Cu 2 O/CNTs microcapsules were dispersed in water to form a new kind of slurry, such fluid exhibited great improvement in terms of thermal conductivity , specific heat capacity , light absorption performance and photo-thermal conversion efficiency than that of paraffin@Cu-Cu 2 O microcapsules slurry. Therefore, the high heat storage capability and excellent photo-thermal conversion performance of the paraffin@Cu-Cu 2 O/CNTs microcapsule slurry make it to be the most potential heat transfer fluid for direct absorption solar collector.

CAS / MDL: 112-90-3 25155-30-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2019 · IF 8.456

MxOy–ZrO2 (M = Zn, Co, Cu) Solid Solutions Derived from Schiff Base-Bridged UiO-66 Composites as High-Performance Catalysts for CO2 Hydrogenation

Wen Li,Kuncan Wang,Junjie Huang,Xiao Liu,Dun Fu,Jiale Huang,Qingbiao Li,Guowu Zhan

Metal–organic frameworks have been exploited as excellent solid precursors and templates for the preparation integrated nanocatalysts with multicomponent and hierarchical structures. Herein, a novel synthetic protocol has been developed to fabricate versatile Zr-based solid solutions (such as ZnO–ZrO2, Co3O4–ZrO2, and CuO–ZrO2) via pyrolysis of Schiff base-modified UiO-66 octahedrons (size <100 nm), which were then utilized as efficient catalysts for CO2 hydrogenation. The Schiff base serves as an effective bridge to dope secondary metal ions into UiO-66 frameworks with controlled amounts of 0.13–8.8 wt %, which are initially hard to achieve. Interestingly, by simply changing the loading metal ions, the selectivity of C1 hydrogenation products can be facilely tuned. For instance, the maximum CO2 conversion of ZnO–ZrO2, Co3O4–ZrO2, and CuO–ZrO2 solid solutions were 5.8, 11.4, and 22.5%, with the main product selectivity of 70% CH3OH, 92.5% CH4, and 86.7% CO, respectively. Moreover, in situ diffuse reflectance infrared Fourier transform spectra characterization reveals that the significant difference in C1 product selectivity is mainly determined by the balance of *HCOO, *CH3O, and *CO intermediate species over the Zr-based solid solutions.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS A-GENERAL · 2018 · IF 4.521

The superior performance of Nb-modified Cu-Ce-Ti mixed oxides for the selective catalytic reduction of NO with NH3 at low temperature

Xiaoqiang Wang,Yue Liu,Qingji Ying,Weiyuan Yao,Zhongbiao Wu

In this paper, a series of Nb modified Cu-Ce-Ti mixed oxides (Nb y CCT) were synthesized using wetness impregnation method for the selective catalytic reduction of NO with ammonia (NH 3 -SCR). The activity tests indicated that Nb y CCT catalysts had shown superior SCR performances. Among which, Nb 0.05 CCT catalyst exhibited a NO conversion of more than 90% within a broad operation temperature window (180–360 °C) under the GHSV of 40,000 h −1 . After that, corresponding characterizations were performed to correlate the physical structures and surface properties to catalytic performances. These results revealed that the strong interactions among the active phases induced by Nb addition could not only enhance the redox property of the catalysts but also inhibit the over-oxidation of NH 3 , which would be beneficial to SCR performance within a wide temperature range and good reaction selectivity. Furthermore, DRIFTS results suggested that the doping of Nb could promote the formation of NO 2 , thereby enhancing the “fast” SCR reaction process (Langmuir-Hinshelwood reaction pathway). Moreover, the Nb 0.05 CCT catalyst showed a better sulfur tolerance compared to Nb free catalyst that over 85% NO conversion could be retained after 12 h SCR reaction in the presence of SO 2 and H 2 O.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
BIORESOURCE TECHNOLOGY · 2019 · IF 6.669

Rice husk derived double network hydrogel as efficient adsorbent for Pb(II), Cu(II) and Cd(II) removal in individual and multicomponent systems

Jianhong Ma,Tong Li,Yutang Liu,Tao Cai,Yuanfeng Wei,Wanyue Dong,Hui Chen

In this study, lignin extracted from rice husk was used to synthesis double network hydrogel adsorbent, named RH-CTS/PAM gel. RH-CTS/PAM gel exhibited macroporous structure and high buried water content, which gave rise to the exceptional adsorption performance. As results, in individual systems, the equilibrium time of Pb(II), Cu(II) and Cd(II) with initial concentration of 200 mg/L could be reached within 10 min, with the theoretical maximum adsorption capacity of 374.32, 196.68 and 268.98 mg/g, respectively. The adsorption rate and capacity of Pb(II), Cu(II) and Cd(II) in multicomponent systems were lower than that of individual systems. However, in a few cases of ternary system, higher adsorption rate and capacity was observed compare to binary systems. Adsorption mechanism indicated that both oxygen-containing and nitrogen-containing functional groups played a dominant role during the adsorption process, and mainly through chemical interaction along with a small amount of physical interaction.

CAS / MDL: 9012-76-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
BIOSENSORS & BIOELECTRONICS · 2013 · IF 5.437

Electrochemical immunosensor with graphene quantum dots and apoferritin-encapsulated Cu nanoparticles double-assisted signal amplification for detection of avian leukosis virus subgroup J

Xindong Wang,Lijian Chen,Xiurong Su,Shiyun Ai

A novel sandwich electrochemical immunoassay was developed for ultrasensitive detection of avian leukosis virus subgroup J (ALVs-J) using graphene quantum dots (GQDs) and apoferritin-encapsulated Cu (Cu-apoferritin) nanoparticles for signal amplification . GQDs were used both for the conjugation of primary ALVs-J antibodies (Ab 1 ), and immobilization of secondary ALVs-J antibodies (Ab 2 ) after compounded with Fe 3 O 4 . Cu-apoferritin nanoparticles were first selected to immobilize onto Fe 3 O 4 @GQDs hybrid as electroactive probes. After the well-known sandwich-type assembly, Cu was released from the apoferritin cavity, and then detected by differential pulse voltammetry (DPV). Owing to the huge surface area GQDs provided, a considerable number of antibodies were loaded onto the immunosensor, which effectively increased the electrical signal. And the introduction of Cu-apoferritin nanoparticles increased the loading amount of electroactive probes significantly; hence the signal was once again amplified. To embody the signal amplification property of the protocol, the performance of various labels was compared in detail. The immunosensor displayed excellent analytical performance for the detection of ALVs-J range from 10 2.08 to 10 4.50   TCID 50 /mL with a detection limit of 115   TCID 50 /mL ( S / N =3), and the resulting immunosensor also showed high sensitivity, good reproducibility and stability.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF CATALYSIS · 2015 · IF 1.964

Highly dispersed V2O5/TiO2 modified with transition metals (Cu, Fe, Mn, Co) as efficient catalysts for the selective reduction of NO with NH3

Xin Zhao,Lei Huang,Hongrui Li,Hang Hu,Jin Han,Liyi Shi,Dengsong Zhang

Different transition metals were used to modify V 2 O 5 -based catalysts (M-V, M = Cu, Fe, Mn, Co) on TiO 2 via impregnation, for the selective reduction of NO with NH 3 . The introduced metals induced high dispersion in the vanadium species and the formation of vanadates on the TiO 2 support, and increased the amount of surface acid sites and the strength of these acids. The strong acid sites might be responsible for the high N 2 selectivity at higher temperatures. Among these catalysts, Cu-V/TiO 2 showed the highest activity and N 2 selectivity at 225–375 °C. The results of X-ray photoelectron spectroscopy, NH 3 -temperature-programmed desorption, and in-situ diffuse reflectance infrared Fourier transform spectroscopy suggested that the improved performance was probably due to more active surface oxygen species and increased strong surface acid sites. The outstanding activity, stability, and SO 2 /H 2 O durability of Cu-V/TiO 2 make it a candidate to be a NO x removal catalyst for stationary flue gas.

CAS / MDL: 13463-67-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2015 · IF 7.435

Enhanced self-catalytic degradation of CuEDTA in the presence of H2O2/UV: Evidence and importance of Cu-peroxide as a photo-active intermediate

Shenyu Lan,Ya Xiong,Shuanghong Tian,Jinxi Feng,Tianyao Xie

A new insight into the degradation of CuEDTA with UV/H 2 O 2 was performed. It was found that the degradation was an UV-enhanced self-catalytic process with two main stages. The first was the induction stage in which cupric ions were produced in CuEDTA degradation with UV photolysis or/and H 2 O 2 oxidation . The second was the photo-catalytic degradation stage in which CuEDTA was oxidized by UV-enhanced cupric ion-based Fenton process. The degradation efficiency reached as high as 82.2% during 18   min, being 37.4 times higher than the efficiency sum of single H 2 O 2 oxidation and single UV photolysis. The enhancement effect can be contributed to the synergetic interaction between H 2 O 2 , cupric ion and UV, specially, to the excellent photo-activity of copper-peroxide intermediates. One of them was identified to be CuO 2 by analysis of its CE-C 4 D electropherograms, UV–vis adsorption spectra, FT-IR spectra, Raman spectra, especially XPS spectra. The enhancement mechanism was experimentally confirmed to be due to the acceleration of Cu(II)-to-Cu(I) transform by the photolysis of copper-peroxide intermediates, leading to the increasing CuEDTA degradation.

CAS / MDL: 4733-39-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Inorganic and Organometallic Polymers and Materials · 2016 ·Vol. 26 ·期 5 ·1101-1106 · IF 1.308

Structure and Photocatalytic Property of a Novel Three-Dimensional Supramolecular Cu(ΙΙ) Coordination Polymer with pcu Topology Based on the Rigid Multifunctional Ligand

Wang Xiaoshuo Wu Pengfei,Lu Siyuan Xu Pengpeng

A new copper coordination polymer, [Cu 2 L 4 (H 2 O) 2 ] n ( 1 ), (HL = 3-(pyridine-2-yl)benzoic acid) has been solvothermally synthesized by using the HL and CuCl 2 ⋅2H 2 O and characterized by IR spectra, elemental analysis, single-crystal and powder X-ray diffractions, and TGA. Compound 1 contains a well-known paddle-wheel unit [Cu 2 (COO) 4 ], which is connected to a three-dimensional supramolecular structure with pcu topology through the hydrogen bond interactions. Compound 1 displays considerable thermal stability and exhibits selective absorption in the visible region, which is shown by thermogravimetric analysis and solid-state UV–Vis diffuse-reflectance spectra, respectively. In addition, compound 1 represents an example of visible light driven photocatalyst based on coordination polymer and shows good degradation ability over Rhodamine B (RhB).

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2017 · IF 3.359

Highly efficient removal of perchlorate and phosphate by tailored cationic metal-organic frameworks based on sulfonic ligand linking with Cu-4,4′-bipyridyl chains

Hongguo Zhang,Ting Li,Zhiquan Yang,Minhua Su,Lian Hou,Diyun Chen,Dinggui Luo

Perchlorate (ClO 4 − ) had caused great impacts to human health via inhibiting the uptake of iodide by the thyroid gland and its removal was strongly affected by co-existing anions in aqueous solution. The adsorptive features of perchlorate, co-existing anions and their removal mechanisms on two different metal-organic frameworks (MOFs) are compared in this paper. Two MOFs (i.e., α , β -ethanebbbdisulfonic-Cu-(4,4′-bipy) 2 and sulfamic-Cu-(4,4′-bipy) 2 ) were synthesized to remove ClO 4 − and co-existing anions from aqueous solution. It was found that MOFs can effectively remove PO 4 3− and ClO 4 − . The adsorption reactions of PO 4 3− and ClO 4 − by MOFs were exothermic and spontaneous, as confirmed by the thermodynamic analysis. The sorption rates of the anionic pollutants followed the pseudo first-order reaction. The sorption isotherms followed the Langmuir model with K L values of 0.0083, 0.0257, 0.2133 and 0.0448 for ClO 4 − , PO 4 3− , ClO 4 − (PO 4 3− ), PO 4 3− (ClO 4 − ), respectively. A certain amount of perchlorate and phosphate were adsorbed by MOFs under the pH range of 2 to 10. However, as long as pH increased up to 12, the absorption capability decreased remarkably due to the crystal structure of materials being collapsed in an alkaline environment. For the absorption of anions by MOFs, Gibbs’ free energy of may be attributed to the effects of adsorption. Sulfonic acid groups interlaminated in MOFs were exchanged by tetrahedral oxoanions, contributing to ion-exchange adsorption. The findings in this study help develop novel methods for perchlorate and phosphate removal from aqueous solution.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。