文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4093至4104个,产品总数8,185个

切换升序
LIGHT
POLYMER · 2018 · IF 3.483

Sodium Bis(acyl)phosphane oxide (SBAPO): An efficient photoinitiator for blue light initiated aqueous RAFT dispersion polymerization

Jun He,Dongdong Liu,Jianbo Tan,Li Zhang

We report a novel blue light initiated aqueous reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA) with a poly (glycerol monomethacrylate) homopolymer as the macro-RAFT agent and sodium bis(acyl)phosphane oxide (SBAPO) as the photoinitiator . High monomer conversions were achieved within 1 h of blue light irradiation . Taking advantage of the temperature-insensitive feature of photoinitiator , the effect of reaction temperature on the blue light initiated aqueous RAFT dispersion polymerization was studied in detail. A new morphological phase diagram was constructed for the first time by changing the degree of polymerization (DP) of the core-forming block and the reaction temperature. Moreover, a typical morphological phase diagram for the blue light initiated aqueous RAFT dispersion polymerization at 70 °C was also built and various morphologies have been prepared. Effect of wavelength of light (405 and 465 nm) on copolymer compositions and morphologies was studied. Finally, a fully one-pot blue light initiated aqueous RAFT polymerization was developed for the synthesis of various diblock copolymer nano-objects.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry B · 2021 ·Vol. 9 ·期 10 ·2483-2493 · IF 6.331

A light-up fluorescence resonance energy transfer magnetic aptamer-sensor for ultra-sensitive lung cancer exosome detection

Nanhang Zhu,Guohao Li,Juan Zhou,Yujia Zhang,Ke Kang,Binwu Ying,Qiangying Yi,Yao Wu

In vitro liquid biopsy based on exosomes offers promising opportunities for fast and reliable detection of lung cancers. In this work, we present a fluorescence resonance energy transfer (FRET) magnetic aptamer-sensor for magnetic enrichment of exosomes with aptamers and detection of cancerous-surface proteins based on a light-up FRET strategy. Fluorescent quantum dots (QDs) and aptamers were introduced onto magnetic nanoparticles and the fluorescence emission turned down when the aptamers were paired with their complementary DNA on the surface of Au nanoparticles. Later, competitive binding of exosomes with the aptamers expelled the Au nanoparticles resulting in an exosome concentration-dependent linear increase of QD fluorescence intensity in a broad exosome concentration range (5 × 102–5 × 109 particles per mL). As found in our work, this system behaved ultra-sensitively and the calculated detection limit of this FRET magnetic aptamer-sensor was as low as 13 particles per mL. Furthermore, taking epithelial cancer-specific antigen (epithelial cell adhesion molecule, EpCAM) screening as a typical example, our built FRET magnetic aptamer-sensor allowed a rapid and efficient distinction of all the epithelial cancer cases (7 lung cancers and 5 other cancers) from health volunteers with 100% accuracy.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION · 2021 · IF 6.158

Comparative analysis of conventional light source and LED array combined with the catalyst for degradation of antibiotics

Lizhe Ma,Zhou Yang,Bang Ji,Yunfeng Liu,Yinlong Jiang,Jieli Duan,Wenfeng Zhao

In this study, the LED array system (UV and visible light) was established, and the theoretical light distribution of the reactor was simulated in MATLAB. The light field of the conventional light source is more uniform than that of the LED array, and the light field uniformity of the LED array can optimize by increasing the number of LED. Various combinations of light sources and catalysts were subjected to batch experiments in laboratory-scale reactors. All experiments are consistent with the Langmuir-Hinshelwood model, where k UV-LEDs array [P25-Sulfamethazine] =0.0018 min −1 and k Blue-LEDs array [Ag3PO4-Tetracycline] =0.0077 min −1 . In comparison experiments, conventional light sources exhibited faster dynamics compared to LED array light sources, where k Mercury lamp [P25- Sulfamethazine] =0.0209 min −1 and k Xenon lamp [Ag3PO4- Tetracycline] =0.0221 min −1 . Besides, all experiments are analyzed for electric energy per order ( E EO ). Specifically, the E EO value of the xenon lamp is 121 times that of the blue- LEDs array when the tetracycline concentration is 50 mg/L. The UV–vis of the catalyst is also coupled with the emission spectrum of the light source to evaluate the figures-of-merit of the system. The figures-of-merit ratio of the mercury lamp to the UV-LEDs array is 58.4, and the figures-of-merit ratio of the xenon lamp to the blue-LEDs array is 69.8. The obtained model can be applied to different reactors. This work demonstrates that the photocatalytic system driven by the LED array is superior to the conventional light source system regarding photon utilization rate and sustainability.

CAS / MDL: 106-51-4 67-63-0 62-76-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2021 · IF 5.316

Construction of two-dimensional BiOI on carboxyl-rich MIL-121 for visible-light photocatalytic degradation of tetracycline

Dingliang Dai,Jianhao Qiu,Ming Li,Jie Xu,Lu Zhang,Jianfeng Yao

A series of BiOI/MIL-121(Al) hybrid photocatalysts has been prepared by a facile hydrothermal method. Two-dimensional BiOI sheets are intimately anchored on rod-like MIL-121 due to the electrostatic and coordination effects between Bi 3+ and carboxyl. The BiOI/MIL-121(Al) hybrid exhibits favorable performances for visible-light-driven degradation of tetracycline. The degradation performance of the optimal sample BM-20 is more than twice as that of pure BiOI. Apart from the close contacts between BiOI and MIL-121, the hydrogen bond induced by carboxyl in MIL-121 promotes the adsorption of tetracycline, which is also conducive to the photocatalytic degradation process. Moreover, results show that photo-induced holes and superoxide radicals are both the main active species for the photocatalytic degradation of tetracycline over BiOI/MIL-121 composites. This work would inspire the materials design with specific functional groups for efficient (photo)catalytic reaction.

CAS / MDL: 7681-11-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2021 ·Vol. 11 ·期 7 ·2577-2588 · IF 6.119

Mn-Decorated CeO2 nanorod supported iron-based catalyst for high-temperature Fischer–Tropsch synthesis of light olefins

Xian Wu,Weixin Qian,Haitao Zhang,Zhonghao Han,Hewei Zhang,Hongfang Ma,Dianhua Liu,Qiwen Sun,Weiyong Ying

CeO2 nanorods with a mean width of 11.9 nm were synthesized via a facile hydrothermal method. Subsequently, Fe/CeO2 and Fe/CeO2@xMnO2 catalysts were prepared from the CeO2 nanorods and applied in the high-temperature Fischer–Tropsch synthesis of light olefins. Results show that the CeO2 support donates electrons to Fe species, which promotes the dissociation of CO while suppressing the hydrogenation reaction, and then improves the selectivity to light olefins. The synergistic effect between Mn and Ce can improve the oxygen mobility on the catalyst surface and promote the electron-donating ability of Ce, thereby promoting the formation of χ-Fe5C2 and further improving the selectivity to light olefins. However, excess Mn hinders the contact between CeO2 and Fe species and the migration of O atoms, and electron transfer from Ce to Fe can be blocked. Additionally, the reduction of iron oxides was suppressed and subsequently the CO conversion was reduced. The best hydrocarbon distribution for light olefins was 40.4% at a CO conversion of 39.9% over the Fe/CeO2@0.2MnO2 catalyst.

CAS / MDL: 1344-28-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Energy Materials · 2021 · IF 6.024

C-Rich Graphitic Carbon Nitride with Cross Pore Channels: A Visible-Light-Driven Photocatalyst for Water Splitting

Shuo Zhao,Yuepeng Liu,Yanyun Wang,Liying Xie,Jiasheng Fang,Yiwei Zhang,Yuming Zhou,Shuping Zhuo

Carbon nitride is found to be an outstanding metal-free photocatalyst for photocatalytic hydrogen evolution. However, carbon nitride suffers from insufficient light absorption and wide band gap, which limits the photocatalytic efficiency. Herein, we develop a carbon-rich graphitic carbon nitride with cross pore channels. The influence of rich carbon and porous structure on the optical and electrical properties of as-prepared carbon nitride is studied in detail. The carbon-rich carbon nitride exhibits larger surface area, enhanced light-harvesting ability, faster separation rate of photoinduced carriers through abundant carbon rings and narrower band gap than bulk CN. Especially, the carbon-rich carbon nitride displays a much higher hydrogen generation efficiency (551.5 μmol/h), which is approximately 117 times and 2.3 times higher than that of bulk carbon nitride obtained by the calcination of melamine (4.7 μmol/h) and pure CN (240.3 μmol/h), respectively. Moreover, an advanced H2 evolution rate of 3.7 μmol for CN-50 is obtained within 4 h without the addition of Pt cocatalysts, which is two times higher than that of pure CN. More importantly, excellent photostability with a negligible decrease in the catalytic ability for CN-50 can be achieved. This fabrication method can be extended to the design of catalysts with excellent photocatalytic activity for hydrogen generation, CO2 reduction, and many other processes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Advanced Electronic Materials · 2021 ·Vol. 7 ·期 7 ·2000965 · IF 7.295

High-Performance Ultrapure Green CdSe/CdS Core/Crown Nanoplatelet Light-Emitting Diodes by Suppressing Nonradiative Energy Transfer

Zuoliang Wen,Pai Liu,Jingrui Ma,Siqi Jia,Xiangtian Xiao,Shihao Ding,Haodong Tang,Hongcheng Yang,Chaojian Zhang,Xiangwei Qu,Bing Xu,Kai Wang,Kie Leong Teo,Xiao Wei Sun

Colloidal nanoplatelets (NPLs) are an emerging semiconductor nanocrystal in the display community due to their ultranarrow emission linewidth. Herein, an ultrapure green emitting nanocrystal light-emitting diode (LED) based on four-monolayer CdSe/CdS core/crown NPLs is developed. By applying the nonstacked nanoplates, the nonradiative energy transfer in the NPLs film is successfully suppressed. The nonstacked NPL-LEDs with pure green emission of 521.5 nm exhibit a low turn-on voltage of 2.1 V, a maximum luminance of 22 400 cd m −2 , a peak external quantum efficiency (EQE) of 2.16%, which is a sixfold enhancement comparing to the stacked NPL-LED (EQE = 0.34%). This work demonstrates the potential of core/crown NPLs for ultrawide color gamut displays.

CAS / MDL: 7782-49-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SCIENCE OF THE TOTAL ENVIRONMENT · 2021 · IF 7.963

Visible-light induced activation of persulfate by self-assembled EHPDI/TiO2 photocatalyst toward efficient degradation of carbamazepine

LiWei Yang,YanYan Jia,YaQi Peng,Peng Zhou,Dian Yu,ChuanLiang Zhao,JiaoJie He,ChuanLang Zhan,Bo Lai

Removal of pharmaceutical and personal care products from wastewater is very important in water treatment process. Combining photocatalysis with persulfate (PS) could be a good solvent for this problem. Novel perylene diimide derivative (EHPDI) was designed and synthesized. Furthermore, self-assembled EHPDI/TiO 2 composite photocatalyst (EPT) was prepared and applied in activating persulfate (PS) under visible light to enhance the photodegradation of pollutants. The presence of the alkyl side chain 2-ethylhexyl optimizes the self-assembly process, enabling the composite material to achieve high performance under low EHPDI loading. Various methods were used to detect the physical and chemical characteristics of EPT. Carbamazepine (CBZ) was chosen to be the model pollutant to study the removal efficiency of EPT/PS system under visible light. Within 30 min, 5.0 mg/L CBZ could be almost completely degraded, and the removal ratio of TOC was 75.2% within 60 min. The SO 4 – , OH, O 2 – , 1 O 2 , and h + were proved to be involved in the removal of CBZ by EPR and quenching experiments. Then, other typical pollutants were degraded by this EPT/PS system, demonstrating this system is suitable for degrading different pollutants. Besides, the degradation paths of CBZ were proposed by HPLC/MS. Finally, the EPT showed excellent recyclability and stability.

CAS / MDL: 7647-01-0 7664-93-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2021 · IF 13.273

Efficient light-free activation of peroxymonosulfate by carbon ring conjugated carbon nitride for elimination of organic pollutants

Zhenhuan Chen,Tong Li,Yue Zhu,Xiaoying Liang,Zhiyu Zhao,Di Wang,Junhao Li,Yaowen Gao,Chun Hu

Realizing graphitic carbon nitride (g-C 3 N 4 ) being active in light-free heterogeneous catalysis remains a big challenge as a result of its inertness if not irradiated. Herein, we demonstrate the successful construction of g-C 3 N 4 -based in-plane heterostructure by intimately connecting g-C 3 N 4 framework with carbon ring via strong π-conjugated bonds, which regulates the electron density distribution of the g-C 3 N 4 composite. The optimized carbon ring conjugated carbon nitride (CCN 0.1 ) with porous architecture and modulated electronic structure delivers admirable catalytic performance in peroxymonosulfate (PMS) activation without the need of light, with its specific activity being significantly superior to nonmetal-doped g-C 3 N 4 and comparable to part of active nitrogen-doped carbon materials. Experimental data and theoretical results revealed the two domains of g-C 3 N 4 with higher electron density and the conjugated carbon ring with lower electron density in CCN 0.1 involve in PMS conversion accounting for PMS reduction and oxidation, respectively, which simultaneously facilitates dissolved oxygen reduction over the g-C 3 N 4 field. Moreover, CCN 0.1 shows robust stability in PMS activation, and meanwhile, the CCN 0.1 /PMS system exhibits potential effectiveness in actual industrial wastewater remediation. This work expands the range of nonmetallic g-C 3 N 4 -based materials for light-free activation of persulfate and deepens the mechanistic understanding of persulfate conversion process for wider environmental applications.

CAS / MDL: 75-65-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Environmental Science-Water Research & Technology · 2021 ·Vol. 7 ·期 8 ·1430-1442 · IF 4.251

The synthesis of novel FeS2/g-C3N4 nanocomposites for the removal of tetracycline under visible-light irradiation

Shengwang Gao,Yang Liu,Jianchao Zhu,Yaqiao Wang,Xue Han,Xunfeng Xia,Xiang Zhao

Novel FeS2/g-C3N4 (FC) composites were successfully constructed using an impregnation–calcination method, and they demonstrated a wonderful visible-light catalytic performance compared with unmodified g-C3N4 and FeS2. The structures, morphologies, and chemical states of the samples were characterized. The photocatalytic performance was assessed based on the removal of tetracycline (TC) under visible light. The removal of TC by 20%-FC reached 83.5% within 180 min, much higher than when using g-C3N4 or FeS2. The improved degradation of TC was a result of the introduction of FeS2, which obviously enhanced the separation of photogenerated carriers at the firmly contacted interface. The effects of the key operating parameters were further explored, including the doping ratio, the concentration of photocatalyst, and the pH value. The photocatalytic theory of charge division was demonstrated using quenching experiments and electron spin resonance (ESR) studies. Finally, the FeS2/g-C3N4 composite exhibited remarkable recyclability and stability. This study creates new prospects for the synthesis of photocatalysts and for the degradation of resistant organic pollutants for environmental remediation.

CAS / MDL: 106-51-4 79603-03-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS RESEARCH BULLETIN · 2021 · IF 4.641

MOF derived carbon modified porous TiO2 mixed-phase junction with efficient visible-light photocatalysis for cyclohexane oxidation

Guang Xu,Ying Zhang,Dandan Peng,Donghai Sheng,Yao Zhang,Ye Tian,Di Ma

In this paper, carbon modified porous TiO 2 mixed-phase junction was successfully fabricated by using the MIL-125(Ti)-P25 composite as the precursor. The porous TiO 2 possessed abundant pores and large surface area inherited from its precursor during a simple one-step pyrolysis in a crucible, and the modified TiO 2 showed catalytic activity for photocatalytic cyclohexane oxidation. Moreover, the ratios of anatase/rutile TiO 2 and carbon contents in the modified TiO 2 mixed-phase junction can be regulated conveniently. Among the mixed-phase porous TiO 2 , the C TiO 2 –4 sample containing 12.4 wt% rutile TiO 2 presented the best photocatalytic activity, which was also much better than those of carbon modified pure anatase or rutile TiO 2 . The carbon modification was characterized by carbon doping and surface carbon species, which played the vital role in enhancing the photocatalytic activity of the mixed-phase TiO 2 . Carbon doping into TiO 2 lattice can effectively reduce its band gap energy and extend the light response range. The carbon species on the TiO 2 surface can improve the light absorption efficiency and promote the transport of photogenerated electrons. Free radicals capture experiments demonstrated that •OH and •O 2 − radicals were important active species in the cyclohexane oxidation reaction. This work provides a MOF-mediated P25-assisted synthesis strategy that may guide the design of other photocatalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2021 ·Vol. 32 ·期 4 ·2107644 · IF 18.808

Vacuum-Assisted Preparation of High-Quality Quasi-2D Perovskite Thin Films for Large-Area Light-Emitting Diodes

Chaoran Chen,Linxiang Zeng,Zhengyan Jiang,Zhenhua Xu,Yijun Chen,Zhen Wang,Shi Chen,Baomin Xu,Yaohua Mai,Fei Guo

Recent years have witnessed marked progress in the electroluminescence efficiency of perovskite-based light emitting diodes (PeLEDs). Nevertheless, the majority of highly efficient devices feature only several square millimeters with the perovskite emitting layers deposited by nonscalable methods, which hinders their intriguing application in large-area lightings and displays. Here, a robust crystallization protocol is devised for the deposition of high-quality perovskite emitting layers by blade coating. Central to this method is the deployment of a vacuum process to the freshly coated precursor film, thereby achieving controllable crystallization kinetics by decoupling precursor deposition and the subsequent thermal annealing. Accordingly, dense and uniform perovskite thin films with efficient energy funneling among the evenly distributed 2D and 3D phases are obtained. PeLED devices based on the vacuum-processed quasi-2D cesium lead tribromide layers achieve high external quantum efficiencies of 8.24% and 6.12% on active areas of 0.12 and 1 cm 2 , respectively. The scalability of the technology is further demonstrated by fabricating a 3.5 × 3.5 cm 2 device with bright and uniform emitting characteristic. This work offers a viable approach for further advancing the performance of large-area PeLEDs by scalable methods.

CAS / MDL: 64-17-5 67-63-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。