CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Ruiji Zhang,Fangwei Guo,Wenchen Zhang,Fei Pan,Xing Zhang
Ceramics containing profiled fiber-like additives (nanotubes, whiskers, etc.) show high mechanical properties. However, the toughening mechanism is debated due to its complex multi-scale microstructure. In this work, ZrB 2 (Z)-20 vol%SiC(S) spiral fibers (ZS sf ) were prepared by liquid rope effect and non-solvent induced phase separation, while quantitative relation of mechanical properties and structure were investigated by using SEVNB with femtosecond lasers and in-situ 3D-XRM simulation. The ZrB 2 -SiC composites with hierarchy ZS sf exhibited a ∼60 % increase in fracture toughness (5.45 MPa m 1/2 ) compared with blank composites, while the toughening efficiency of the hierarchy ZS sf increased over 2 times compared to the 1D and 2D toughening additives. The ZS sf with a thin graphite-like layer and spiral structure with hierarchy pores provided a torsional release effect that changed brittle fracture to the pseudoplastic fracture, where topological interlocking of 3D crimped structure hindered rapid cracking propagation. Additionally, the enhanced toughness was attributed to the uniform reconstruction of the stress field induced by hierarchical inner pores. The preserved 3D topological interlocking and uniform stress reconstruction lead to the highly stable fracture toughness of the ZS sf composites up to 1500 °C.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2024
·Vol. 29
·期 19
·4535
·
IF 4.2
Yingtan Yu,Mengdi Liu,Shimeng Wang,Chaoxing Zhang,Xue Zhang,Li Liu,Shuang Xue
Polychlorinated naphthalenes (PCNs) are a new type of persistent organic pollutant (POP) characterized by persistence, bioaccumulation, dioxin-like toxicity, and long-range atmospheric transport. Focusing on one type of PCN, monochlorinated naphthalenes (CN-1, CN-2), this study aimed to examine their photodegradation in the environment. In this work, CN-1 and CN-2 were employed as the model pollutants to investigate their photodegradation process under UV-C irradiation. Factors like the pH, initial concentrations of CN-1, and inorganic anions were investigated. Next, the roles of hydroxyl radicals ( • OH), superoxide anion radicals (O 2 •− ), and singlet oxygen ( 1 O 2 ) in the photodegradation process were discussed and proposed via theory computation. The results show that the photodegradation of CN-1 and CN-2 follows pseudo-first-order kinetics. Acidic conditions promote the photodegradation of CN-1, while the effects of pH on the photodegradation of CN-2 are not remarkable. Cl − , NO 3 − , and SO 3 2− accelerate the photodegradation of CN-1, whereas the effect of SO 4 2− and CO 3 2− is not significant. Additionally, the contributions of • OH and O 2 •− to the photodegradation of CN-1 are 20.47% and 38.80%, while, for CN-2, the contribution is 16.40% and 16.80%, respectively. Moreover, the contribution of 1 O 2 is 15.7%. Based on DFT calculations, C4 and C6 of the CN-1 benzene ring are prioritized attack sites for • OH, while C2 and C9 of CN-2 are prioritized attack sites.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2025
·
IF 6.5
Xiaofei Liu,Daiyu Song,Yunyun Liu,Zhao Huang,Xinyao Wang,Kezhi Wang,Yuxin Yang,Yihang Guo
The cleavage of C–O bonds in biomass-derived carbohydrates is of great significance for the conversion of biomass to chemicals and fuels. We demonstrated that various F127-directed covalent triazine frameworks functionalized by sulfonic acid-based ionic liquids ([C 3 N][OTf]-FCTF) were synthesized by a two-step synthesis process. The interesting morphology of spherical nanofiber of the [C 3 N][OTf]-FCTF(0.25)-10 catalyst was obtained by carefully adjusting the usage of both F127 and ethanol in the synthetic system. The 5-hydroxymethylfurfural synthesis reaction parameters of were first optimized using the [C 3 N][OTf]-FCTF(0.25)-10 via response surface methodology. The [C 3 N][OTf]-FCTF(0.25)-10 exhibited high catalytic activity, and outperformed other CTF-based catalysts with different morphologies and commercial solid acids in the conversion of carbohydrates (e.g., fructose, inulin, sucrose and honey). This is due to the advantages of the loose spherical nanofiber, the rich N-containing units, the suitable Brønsted acid nature and the adjacent acid-base pairs on the surface of the catalyst. The high Brønsted acidity of [C 3 N][OTf]-FCTF(0.25)-10 played a positive role in the selective synthesis of levulinic acid from carbohydrates. The theoretical calculations demonstrated that discrepancies in electron cloud distribution between constructed acid-base pairs and N-rich groups in the catalyst could facilitate the cleavage of C–O bonds in fructose molecules. The Fukui function combined with experimental results elucidated the reaction pathways. The robust interaction between –[C 3 N][OTf] groups and frameworks ensured the excellent reusability of [C 3 N][OTf]-FCTF catalysts. This study will provide a novel approach for synthesizing CTF-based solid acids with controllable morphology, enabling the high-value utilization of carbohydrates.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Yudong Zhang,Yuan He,Jun Li,Yang Xu,Yang Yang,Yao Ge,Xun Zhu,Qiang Liao
Optimizing non-noble catalysts for the oxygen reduction reaction (ORR) is crucial for advancing energy storage and conversion technologies. This study investigates the influence of iron valence states and nitrogen precursor contents on the physicochemical properties and electrochemical performance of lignin-based Fe–N–C catalysts. Catalysts are synthesized using different valence iron sources and varying pyrrole contents. The results reveal that iron(II) doping increases microporosity and specific surface area, while iron(III) doping enhances mesoporous and iron contents of the carbon materials. XPS and Raman spectroscopy confirm the successful incorporation of Fe–Nx active sites in the as-prepared LFeIIIPx catalysts. Electrochemical tests demonstrate that LFeIIIP10 exhibits the highest ORR activity, surpassing commercial Pt/C in half-wave potential (E1/2) and limiting current density (JL). The direct formate fuel cell (DFFC) with an LFeIIIP10 air cathode achieves a maximum power density of 24.7 mW cm–2, 32% higher than that with a Pt/C cathode. This study highlights the critical role of tailoring iron valence states and nitrogen levels to develop high ORR performance, cost-effective Fe–N–C catalysts, providing valuable insights for the future design of non-noble metal catalysts in energy applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Electronic Materials
·
2025
·
IF 4.7
Renxin Xu,Hongyi Luo,Zhengyi Li,Yahan Gao,Wei Zhao,Xiao Li,Wei Jin,Dan Liu
Poor microwave-absorbing performance of a carbonaceous–magnetic hybrid at low frequency is one of the great challenges that needs to be solved urgently. Constructing a three-dimensional structure of a graphene-based absorber with high-loading ferrite nanoparticles onto graphene surfaces is an effective strategy to boost the low-frequency absorbability. Therefore, we constructed substrates of crumpled monolayer graphene oxide spheres by first spray-drying and synthesized high-loading iron hydroxide nanograins onto the substrates by a simple oil-bath heating. Followed by an annealing treatment under Ar gas, an ultrahigh Fe3O4 magnetic crystals loading onto crumpled spherical reduced graphene oxide hybrid (Fe3O4@crGO) was obtained. The wrinkled architecture provides a large number of interface angles for ultrahigh Fe3O4 nanocrystals to avoid the massive agglomeration, which lowers the complex permittivity and improves the complex permeability to perfect absorber’s impedance matching at low frequency. Meanwhile, the impressive conducting loss of rGO, magnetic loss of Fe3O4 nanograins, polarization loss of heterogeneous interfaces, and multiple reflection and scattering of microwaves within the three-dimensional architecture boost the attenuation capability of the absorber. As a result, the as-prepared Fe3O4@crGO-30 hybrid exhibits a superb reflection loss of −52.3 dB at 5.4 GHz. In addition, by tailoring the thickness ranging from 2.5 to 5.0 mm, full coverage absorption in C and X bands can be achieved. This work provides a simple, efficient, and promising way to prepare a graphene-based absorber with perfect low- and middle-frequency absorption capacity.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jiepeng Zhao,Yifei Ma,Zijian Li,Zhaomin Tong,Mei Wang,Liantuan Xiao,Suotang Jia,Xuyuan Chen
This study presents the design of a composite photocatalyst that harnesses the combined effects of internal and external heterojunctions for enhanced performance. The internal heterojunction is achieved by annealing NH 2 -MIL-125(Ti) (NM) under an argon atmosphere, forming an N-doped C-coated anatase/rutile heterostructure (A-NM). By controlling the annealing temperature, the A-NM prepared at 650 °C (A 650 -NM) demonstrates superior photocatalytic CO 2 reduction capability, with an outstanding CO production rate of 0.25 μmol h −1 g −1 under a light intensity of 0.1 W cm −2 . An external heterojunction is then created by combining NM and A 650 -NM in an optimized ratio. At an optimal composite ratio of 9:1 (NM: A 650 -NM), the CO production rate reached 6.3 μmol h −1 g −1 , which is 3.5 times higher than NM and 25 times higher than A 650 -NM. Characterization and DFT analyses reveal that the improved performance stems from the internal heterojunction within A 650 -NM's TiO 2 crystal phases and the external heterojunction between NM and A 650 -NM, which enhanced charge separation and carrier mobility. The N-doped carbon layer further boosts charge carrier transfer efficiency. This work introduces a novel Metal–Organic Framework (MOF)-based photocatalyst for CO 2 reduction, offering valuable theoretical insights and practical strategies for optimizing its performance.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2025
·
IF 9.8
Sijie Liu,Renda Wang,Ping Yu,Kun Liang,Li Wang,Mengyu Gao,Yang Si,Chuang Zhu,Fangfang Ge,Bingsheng Li
In this study, molybdenum (Mo) coatings were deposited on 304 stainless steel (304SS) plates using magnetron sputtering. Subsequently, the samples were annealed at 800 °C under vacuum for varying durations to enhance adhesion strength and thermal stability. Immersion tests were conducted at 700 °C for up to 800 h. After 200 h of immersion, the weight loss of the annealed Mo-coated 304SS was significantly reduced from approximately 11 mg/cm 2 to about 0.44 mg/cm 2 . The Mo-enriched layer effectively suppressed the outward diffusion of alloy elements and facilitated the formation of Cr 2 O 3 by trapping Cr in the interdiffusion layer. Additionally, the Mo 3 Fe 3 O phase formed on the coating surface via diffusion reaction exhibited certain corrosion-resistant properties. Obvious interfaces emerged within the interdiffusion layer, and their formation mechanisms were analyzed. After four thermal cycles (with a 200-h interval), partial delamination of the Mo-enriched layer in the annealed Mo-coated 304SS was observed. This may have resulted from the substantial growth stress of Cr 2 O 3 and the significant mismatch in thermal expansion coefficient between Mo coating and 304SS.
✓ 已验证
产品关联
DOI
高影响因子
Energy Storage Materials
·
2023
·
IF 20.4
Yunjing Cao,Nan Li,Kai Yuan,Na Li,Wujiu Zhang,Shiyu Liang,Zhidong Hou,Da Lei,Ting Jin,Jian-Gan Wang,Keyu Xie,Chao Shen
Ni-rich (Ni≥0.8) LiNi x Co y Mn 1− x −y O 2 (NCM) cathode materials have attracted great interest for high-energy-density lithium ion batteries (LIBs). However, layered oxides of Ni-rich CAMs are suffering from the notorious structural and interfacial degradation in the liquid electrolyte , especially at high state-of-charge (voltage) and temperature, which leads to electrochemical performance deterioration and thermal runaway of the cell. This work systematically and comprehensively reveals the underlying mechanism of the electrolyte additive phenyl trifluoromethyl sulfide (PTS) to enhance the electrochemical property of Ni-rich layered oxides at high voltage (∼4.6 V) and high-temperature (∼50 °C). Specifically, PTS observably encourages the electrode stability via cathode-electrolyte interface strengthening and reactive oxygen species deactivating mechanism, which facilitates the NCM811 cathode to adapt to the deep charging state as well as the highly oxidized environment. The binding energy calculation results reveal that the superoxide radical could steadily adsorb on the S radical or Li + sites by interacting with Li + , thus making the superoxide radical deactivated. With the interface strengthening of PTS, the Ah-level NCM811||Gr pouch cell exhibits excellent cycling stability. This work affords a guide to designing electrolytes for Ni-rich LIBs towards high-voltage and high-temperature.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Weikang Zhu,Yabiao Pei,John C. Douglin,Junfeng Zhang,Haoyang Zhao,Jiandang Xue,Qingfa Wang,Ran Li,Yanzhou Qin,Yan Yin,Dario R. Dekel,Michael D. Guiver
Recently, much work has been devoted to designing catalysts with high porosity and efficient active sites. Although very promising results are achieved using Co/Fe–N–C catalysts based on rotating disk electrode (RDE) tests, actual fuel cell performance is below expectations, probably due to insufficient understanding of the catalyst layer (CL). Therefore, catalyst design should be considered holistically by taking into account CL performance, not only intrinsic activity. Here, Co/Fe–N–C with highly dispersed CoFe nanoalloy in the carbon network is obtained by careful design of Co/Fe-ZIF precursor, resulting in a high oxygen reduction reaction (ORR) site density with good stability. Concerning RDE test in the kinetic region and single cell test (SCT) with complex influence factors, the half-cell test (HCT) is introduced to more accurately evaluate the quality of the Co/Fe–CL. Multi-scale measurements (RDE, HCT and SCT) in different current density ranges allows targeting the key CL influence factors for fuel cell performance.
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2025
·
IF 19
Xiangyu Wang,Boyuan Cao,Hengbo Yin,Pengfei Yan,Tong Liu
The flexible manipulation of the position and type of metal cations in spinel ferrites gives the possibility of tuning its dielectric and magnetic properties, thus opening up broad design space for broadband and low-frequency absorption. However, there are still challenges in how to ensure that metal cations of diverse designs can be effectively introduced into the ferrite lattice to form homogeneous entropy-stable compounds, and further engender stable ferrite compounds with special multi-interface and hollow micro-nano structures to achieve lightweight and efficient performance. In this paper, the opened-hollow multi-shell high-entropy (FeCoNiZnMg)Fe 2 O 4 @C microspheres with a controllable carbon-coated triple-shell and entropy-stable ferrite composition are constructed. The designed hollow triple-shell structure enhances the magnetic interactions between the shells and regulates the magnetic domain structures and effective fields. The (FeCoNiZnMg)Fe 2 O 4 @C microspheres achieve an incredibly high absorption strengths (−60.5 dB) and wide effective absorption (9.3 GHz). Meanwhile, the high entropy effect effectively adjusts the anisotropic magnetic field size, significantly improving the low-frequency absorption of 4–8 GH band, far exceeding the performance of ferrite@C materials without forming a high-entropy phase. This unique hollow multi-shell ferrite@C composite based on high entropy strategy offers exciting prospects for rational composition and accurate structure construction for multi-interface polarization and lightweight design.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2024
·Vol. 36
·期 14
·2311637
·
IF 27.4
Ziyi Yang,Fayuan Lai,Qianjiang Mao,Chong Liu,Ruoyu Wang,Zhihua Lu,Tianran Zhang,Xiangfeng Liu
Dendrite-free Zn metal anodes with high depth-of-discharge (DoD) and robust cycle performances are highly desired for the practical application of aqueous Zn-ion batteries. Herein, the zincophobic/hydrophilic nature of Metal-N-C through manipulating the electronic interactions between metal and coordination atoms is successfully reversed, thereby fabricating a zincophilic/hydrophobic asymmetric Zn-N 3Py+1Pr -C (consisting of a Zn center coordinated with 3 pyridinic N atoms and 1 pyrrolic N atom) host, which realizes uniformed Zn deposition and a long lifespan with high DoD. The experimental and theoretical investigations demonstrate weakened interaction between pyrrolic N and metal center in the asymmetric Zn-N 3Py+1Pr -C triggers downshift of the Zn 3d-band-center and a new localization nonbonding state in the N and C 2p-band, resulting in preferred Zn adsorption to water adsorption. Consequently, the asymmetric Zn-N 3Py+1Pr -C host delivers small Zn nucleation overpotential and high Coulombic efficiency of 98.3% over 500 cycles. The symmetric cells with Zn-N 3Py+1Pr -C@Zn anode demonstrate 500 h dendrite-free cycles at DoD up to 50%. The Zn-N 3Py+1Pr -C@Zn/S-PANI full cell also shows a robust long-term cycle performance of 1000 cycles at 10 A g −1 . This strategy of constructing zincophilic/hydrophobic Metal-N-C may open up their application for the dendrite-free metal anode.
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2025
·
IF 4.9
Juan Liang,Chunqiong Liu,Jiaxiu Guo,Kunming Huang,Jiao Shen
In this paper, we developed a one-dimensional activated carbon (AC) coated graphitic carbon nitride (g-C 3 N 4 ) hybrid nanorods (CN HU/AC) synthesized via an ultrasonic-hydrothermal method. The dual modulation of ultrasonic cavitation and hydrothermal confinement enables simultaneous morphology engineering (1D nanorod formation) and inerfacial microstructure optimization, endowing CN HU/AC with exceptional photoelectron transfer properties. Comparative studies with pristine g-C 3 N 4 and hydrothermally modified CN HU without AC addition reveal that the optimal AC loading (CN HU/AC5) achieves remarkable Cr(VI) photoreduction under visible light, exhibiting rate constants 6.6 times and 2.1 times higher than those of g-C 3 N 4 and CN HU, respectively. This enhancement originates from synergistic effects: (1) AC’s photosensitization broadens light absorption while its coating establishes intimate interfacial contact for accelerated charge transfer; (2) The 1D architecture directs axial elctron transport, coupled with surface C = O / O = C OH groups acting as electron traps; (3) Citric acid functions as both hole scavenger and Cr(VI) complexation agent to lower reduction barriers. This study establishes a paradigm for designing carbon-coupled heterostructures for the sustainable heavy metal remediation.
✓ 已验证
产品关联
DOI
高影响因子