ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Jiahui Zheng,Bochao Ma,Xiaoqing Cui,Rui Wang,Li An,Bin Guo,Hongyan Zhang
Detecting ammonia (NH 3 ) is crucial for both the atmospheric environment and human health. However, developing low-cost, high-sensitivity, and flexible sensors for NH 3 is a significant challenge. Herein, we report a flexible, electrode-free NH 3 sensor based on an ink of polyaniline-covered MXene and multi-walled carbon nanotubes (MXene@PANI-MWCNTs), which was developed on cotton fabric using a dispensing print method. After optimizing the MXene@PANI-MWCNTs concentration, the number of sensor arms and the printed layers, the sensor exhibited a high response in the range of 0.5–25 ppm and can detect as low as 0.5 ppm NH 3 at 40% relative humidity (RH), room temperature (25°C). The response values were significantly higher than those for other interfering gases including H 2 , CO, H 2 S, and NO 2 . Furthermore, the sensor demonstrated excellent mechanical stability, with its response dropping by only 3.7% after 1000 bending cycles. When covered with expanded polytetrafluoroethylene (e-PTFE) film, the sensor showed stable performance in the ranging of 30%–90% RH at 25°C. Additionally, MXene@PANI-MWCNTs ink was printed on masks to detect NH 3 levels in breath, offering potential for medical diagnostics and personal health monitoring.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Hongkuan Zhang,Hanqing Yao,Wenxia Zhu,Qingsheng Huo,Dong Su,Huiming Ji
Polymer-derived silicon boron carbonitride (SiBCN) aerogels exhibit outstanding application prospects in high-temperature thermal insulation and electromagnetic interference (EMI) shielding fields. Herein, graphene nanosheet (GNS) modified SiBCN composite aerogels were fabricated via freeze assembly, freeze-drying and high-temperature pyrolysis. Comprehensive characterizations were performed to systematically reveal the microstructure and phase composition of as-prepared GNS/SiBCN aerogels. Numerical simulations were implemented to investigate the effects of ambient temperature and sample thickness on the thermal insulation capacity, while experimental measurements were carried out to evaluate the EMI shielding performance of the composite aerogels. The as-synthesized GNS/SiBCN aerogels feature abundant micron-sized interconnected pores, which substantially suppress multiple heat transfer pathways inside the matrix. The material achieves an ultralow thermal conductivity of 0.03 W/(m·K), making it highly competitive for high-temperature thermal barrier applications, and a thermal insulation efficiency of 69.73% is realized under a thermal shock of 1000°C. Meanwhile, the composite aerogel delivers a total EMI shielding effectiveness as high as 23.37 dB. This work offers a facile fabrication strategy for lightweight materials integrating thermal insulation and EMI shielding functions and provides new insights for the development of multifunctional aerogels toward cutting-edge aerospace and thermal protection fields.
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULES
·
2026
·
IF 5.7
Ren Jie,Zhou Ziqiong,Zhang Wenjing,Wang Yu,Li Yan,Yang Wu
Developing hydrogels that simultaneously combine high mechanical robustness, antifreezing capability, and stable conductivity remains a substantial challenge for flexible sensing materials. Herein, we report a multifunctional conductive rotaxane-crosslinked hydrogel constructed from a γ-cyclodextrin/poly(ethylene glycol) diacrylate (γ-CD/PEGDA) slide-ring crosslinker embedded in a poly(vinyl alcohol) (PVA)/acrylamide (AM)/xanthan gum (XG)/Zn 2+ network. The threaded crosslinker introduces movable junctions into the network, allowing stress redistribution through a pulley effect and thereby improving the mechanical performance of the hydrogel. Together with hydrogen bonding, Zn 2+ coordination, and the physically crosslinked PVA network, this design generates a robust multicomponent architecture. The optimized hydrogel exhibited a tensile stress of 3.2 MPa, an elongation at break of 254%, and a toughness of 40 MJ m −3 , together with high puncture resistance and cyclic stability. The hydrogel also showed a freezing point of −20.59 ° C and a low equilibrium swelling ratio in water, indicating favorable antifreezing and antiswelling performance. Owing to interconnected ionic conduction pathways, the material further displayed stable ionic conductivity and reliable strain-sensing behavior over a broad strain range, with rapid response/recovery and effective monitoring of human motion and subtle physiological activities. This work provides a practical strategy for constructing mechanically robust, antifreezing, and conductive hydrogels for wearable sensing and related bioelectronic applications.
✓ 已验证
产品关联
DOI
高影响因子
Chemical Engineering Journal Advances
·
2026
·
IF 6.9
Wenbin Fan,Lizhi Jiang,Bingqing Yan,Huifang Li
Driven by surging global lithium demand, highly selective lithium separation from magnesium-rich brines is urgently required. This work systematically investigated the structure–performance relationship of four aryl-substituted phosphates (TOP, DPOP, IPPP, TPP). Moderate aryl substitution widened the coordination difference between Li + and Mg 2+ through electron-withdrawing effects, and DPOP exhibited the optimal balance of extraction capacity and selectivity. A ternary synergistic extraction system was fabricated with DPOP as the primary extractant, P204 to immobilize Fe 3+ , and eco-friendly diethyl succinate (DES) as a polar modifier. DES inhibited third-phase formation at DPOP contents of 10–50 vol.% and produced synergistic solvation via carbonyl groups. Under optimized conditions, the single-stage Li + extraction efficiency achieved ∼73%, and the Li/Mg separation factor reached 1630, nearly 80 times that of the traditional TBP–FeCl 3 system. Synergistic coordination of P204 and DES stabilized Fe 3+ in the organic phase, realizing quantitative lithium stripping with deionized water and avoiding concentrated acid and saponification. The organic phase maintained over 80% extraction efficiency after ten cycles. Slope analysis and FT-IR confirmed the extracted complex LiFeCl 4 •2DPOP•0.1DES. This work transforms DPOP into a sustainable, low-cost, closed loop industrial solution for lithium recovery from high Mg/Li brines.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Yitong Wang,Yanhua Tian,Jingde Li,Liping Zhao,Yanqin Yang
Mixed matrix membranes (MMMs) composed of polymers and metal-organic frameworks (MOFs) can effectively break the trade-off between selectivity and permeability of pure polymer membranes, thus holding great potential for the development of high-efficiency gas separation membranes. Nevertheless, structural mismatches between polymer matrix and MOF particles easily cause interfacial defects and filler aggregation, which severely hinder efficient gas separation. In this work, a novel interfacial bonding strategy is proposed. Specifically, an amidoxime-modified polymer of intrinsic microporosity (AOPIM-1) with similar structure to polymer matrix (PIM-1) is firstly used to modify and encapsulate the zeolitic imidazolate framework-8 (ZIF-8), generating a composite filler AO@ZIF. Within the resultant MMMs, due to the Zn-N coordination bonds and hydrogen bonds between ZIF-8/AOPIM-1 and PIM-1/AOPIM-1, respectively, low-defect interfaces are obtained. The optimized interfacial compatibility further achieves efficient CO 2 /N 2 separation performance. Particularly, when the filler loading is 2.5 wt%, the CO 2 /N 2 selectivity of the AO@ZIF-2.5/PIM-1 membrane increases by 72.8% and 46.0% compared with pristine PIM-1 and ZIF-2.5/PIM-1 membrane, exceeding the 2008 Robeson upper bound and approaching the 2019 Robeson upper bound. Moreover, the resultant membranes also possess outstanding mechanical properties, anti-plasticization capacity, and excellent anti-physical aging stability. This study provides a feasible strategy for interfacial design and performance optimization of high-performance MOF/polymer MMMs toward advanced gas separation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PHYSICS LETTERS
·
2026
·
IF 2.9
Guanqin Wang,Wenlong Gao,Congcong Li,Xiaonuan Geng,Xinyu Wang
A SPEEK/lignin composite membrane is developed to overcome the conductivity-selectivity trade-off. • A hydrogen-bond network between lignin and SPEEK effectively blocks crossover of large [Fe(CN) 6 ] 4− ions. • Improved hydrophilicity facilitates electrolyte uptake and creates better ion transport channels. • The composite membrane enables excellent cycling stability with significantly enhanced coulombic efficiency. Zinc‑iron flow batteries are limited by membrane conductivity-selectivity trade-off. We develop sulfonated poly(ether ether ketone)/lignin (SPEEK/L) composite membranes. The abundant hydroxyl groups (–OH) in lignin interact with sulfonic acid groups (–SO 3 − ) in SPEEK to form a hydrogen-bond network. This network appreciably blocks the crossover of large [Fe(CN) 6 ] 4− ions, enhancing selectivity. The improved membrane hydrophilicity facilitates electrolyte uptake, creating better ion transport channels and reducing membrane resistance. The battery achieves 97.5% coulombic efficiency over 300 cycles at 80 mA/cm 2 , which is much higher than those of pure SPEEK. This synergistic strategy boosts conductivity and selectivity for advanced flow batteries. Download: Download high-res image (200KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2026
·
IF 4.9
Yang Xiang,Haoqian Guo,Kun Jia,Zixin Zhao,Yong You,Yuqi Guo,Xulin Yang,Ying Li,Mengna Feng,Kui Li,Pan Wang
Self-healing coatings have attracted considerable attention for metal protection. Specifically, the development of coating fabrication technologies that provide multiple functional properties can effectively mitigate the substantial economic and resource losses caused by corrosion. In this study, a novel sandwich-structured composite coating was realized by functionalizing different layers. The core-shell nanofibers interlayer embedded between two epoxy (EP) resin layers were prepared via coaxial electrospinning, with polyarylene ether nitrile (PEN) polymer serving as the shell, and benzotriazole/oleic acid (BTA/OA) encapsulated as the corrosion inhibitor within the core. Adhesion testing demonstrated that the fabricated composite coating exhibited strong adhesion between the layers as well as to the substrate, thereby satisfying the Grade 1 requirement. Owing to the well loading of BTA/OA inhibitors within the polymer shell and the efficient released through the microvascular network, electrochemical impedance spectroscopy results indicated that the impedance reached 6.31 × 10 5 Ω·cm 2 after 14 days of immersion in a 3.5% NaCl solution, indicating effective self-healing anti-corrosion performance. Additionally, the surface EP layer was modified through blending with and surface embedding of silver-based (Ag-based) glass antibacterial agents, achieved antibacterial efficacies exceeding 99% against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ). Overall, this study presents an efficient strategy for fabricating sandwich-structured anti-corrosion coatings that integrate self-healing capability and antibacterial activity, and robust structural stability, thereby demonstrating good potential for advanced metal protection applications.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Materials and Technologies
·
2026
·
IF 9.7
Meng Yao,Pengxin Wu,Yuying Yang,Qian Wang,Yuxin Li,Liyong Wang,Jun Sun,Hongqiang Qu,Jianzhong Xu
Polyvinyl alcohol (PVA) has received considerable attention as an insulating material due to its ultra-low thermal conductivity, cost-effectiveness and inherent biocompatibility. However, its application is limited by factors including insufficient mechanical strength and insufficient flame retardancy. To address these issues, a novel sodium alginate (SA)/PVA composite aerogel was developed based on a dual-crosslinked network. This structure is stabilized by electrostatic interactions between taurine cations and alginate anions, synergistically reinforced by a hydrogen-bonding network among taurine derivatives, taurine, PVA, and glycerol, this composite architecture successfully integrates flame retardancy with effective thermal insulation. Experimental results demonstrate that the optimized formulation, GPSTP 4 exhibits exceptional flame-retardant and smoke-suppression properties. Specifically, the peak heat release rate (PHRR) and total heat release (THR) were significantly reduced by 62.05% and 30.92%, respectively. Furthermore, the limiting oxygen index (LOI) value increased markedly from 18.9% for pure PVA to 39.3% for GPSTP 4 , achieving a UL-94 V -0 rating. The enhancement of thermal insulation performance is due to the increase in Taurine phosphite derivatives (TP) incorporation, which significantly reduces the connections between pores. This structure increases the thermal refractive index, effectively prolongs the heat conduction path, and thereby improves the heat insulation performance. Remarkably, these improvements are achieved without compromising the material's mechanical integrity; GPSTP 4 retains high elasticity and demonstrates excellent resilience. In conclusion, this work provides a practical and innovative strategy for simultaneously enhancing the fire safety and thermal insulation properties of PVA/SA materials, facilitating their potential application in demanding environments.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Shuang Li,Mengli Yan,Chenguang Yang,Chunyu Yang,Jianwang He,Yan Xu
Large-scale utilization of hydrogen for fuel cells and chemical manufacturing imposes urgent demands on hydrogen sensing materials with superior sensitivity and selectivity. Herein, we successfully fabricated a Ni-BTC@ZIF-8 MOF-on-MOF heterostructure using polyvinylpyrrolidone (PVP) as a stabilizer and bridging agent. The hierarchical porous architecture enables size-selective microporous sieving in the outer ZIF-8 layer, facilitating H 2 permeation while blocking larger interfering molecules. This selective mass transfer optimizes H 2 accessibility at the sensing interface. Owing to the favorable mass-transport behaviour, the Ni-BTC@ZIF-8 sensor delivers an ultrahigh selectivity with a response value of 6.0 toward 20 ppm H 2 at 200 ℃, alongside an exceptionally fast recovery speed (∼6 s). Moreover, the device demonstrates excellent cycling stability and long-term reliability. This work further probes the underlying mechanism responsible for the improved H 2 -sensing performance of the MOF-on-MOF heterostructure, which arises from interfacial synergistic effects. Specifically, the intimate ZIF-8/Ni-BTC contact affords selective gas-transport channels from ZIF-8 and efficient electron-conduction pathways, with Ni-BTC serving as the active sensing layer for signal transduction. Such a synergistic interplay optimizes the coupling between molecular-sieving and sensing response. These findings provide a feasible and scalable paradigm for constructing novel high-performance hydrogen gas sensors.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Qiuyu Wang,Maoyuan Hu,Wanke Zhou,Junchun Guo,Sheng Li,Xiaoli Xiong,Jinglin Li
ZIF-derived N,P,S-HCNFs provide a porous electroactive interface for TBHQ sensing. • Single- and dual-doped controls with DFT support cooperative heteroatom regulation. • Two linear ranges of 0.9–12 and 12–127 μM were achieved with a 0.075 μM LOD. • Reliable TBHQ quantification was demonstrated in spiked edible-oil samples. • Extra Trees enables validated auxiliary calibration in complex oil matrices. Tert-butylhydroquinone (TBHQ) is a widely used synthetic phenolic antioxidant, and its excessive use in edible oils raises food-safety concerns. Herein, N, P, and S tri-doped hollow carbon nanofibers (N,P,S-HCNF) with interconnected porous channels were fabricated via an electrospinning–pyrolysis strategy. The hollow architecture and heteroatom-induced defects provide abundant electroactive sites and facilitate electron/mass transfer, enabling sensitive electrochemical oxidation of TBHQ. The N,P,S-HCNF/CP sensor exhibited two linear response ranges of 0.9–12 μM and 12–127 μM, with a detection limit of 0.075 μM. Acceptable selectivity, reproducibility, and storage stability were obtained. Single- and dual-doped controls combined with DFT calculations provided mechanistic insight into the enhanced TBHQ adsorption and interfacial electron transfer of N,P,S-HCNF, including preferential interactions involving the phenolic hydroxyl groups. An externally validated Extra Trees calibration model was further employed as an auxiliary strategy to reduce matrix-related prediction bias, integrating hollow carbon nanofiber engineering, multielement heteroatom regulation, mechanistic analysis, and data-driven quantification for TBHQ electrochemical determination in edible oils. A defect-rich N,P,S-doped hollow carbon nanofiber interface enabled sensitive electrochemical oxidation of TBHQ, while DFT supported favorable adsorption and interfacial charge redistribution and machine learning provided auxiliary calibration for improved quantification in edible-oil matrices. Download: Download high-res image (128KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Yujie Xiao,Zhenxi Liu,Litong Yu,Xiaofeng Lv,Juan Du,Baozhan Zheng,Yong Guo
A stable B, N-CDs@SiO 2 RTP composite was constructed via silica confinement. • The composite shows blue fluorescence and green phosphorescence with 15 s afterglow. • A UV–Vis/fluorescence/phosphorescence tri-mode platform was developed for TNP sensing. • Portable RTP-foam enables visual and semi-quantitative on-site TNP detection. The development of optical probes with multimodal responses is of great significance for improving the reliability of hazardous pollutant detection. Herein, a room-temperature phosphorescent (RTP) composite based on B/N co-doped carbon dots (B/N-CDs) confined within a SiO 2 ) matrix (B/N-CDs@SiO 2 ) was developed for the tri-mode detection of 2,4,6-trinitrophenol (TNP). B/N-CDs@SiO 2 exhibited blue fluorescence at 450 nm and green phosphorescence at 520 nm, with an average phosphorescence lifetime of 1.91 s and a visible afterglow lasting approximately 15 s, together with satisfactory optical stability. Interestingly, B/N-CDs@SiO 2 exhibits excellent response to TNP in both UV–vis absorption, fluorescence, and phosphorescence, thereby establishing a tri-mode sensing platform for TNP detection with detection limits of 1.81 μM, 0.32 μM, and 0.54 μM, respectively. The probe also demonstrates high selectivity for TNP over common ions and structurally related aromatic compounds, along with strong anti-interference capability. In spiked recovery tests in kinds of real samples, the satisfactory recoveries ranging from 91.2% to 108.9% (RSD: 0.34% to 3.74%) demonstrating its higher detection accuracy. Finally, the composite can be immobilized onto polyurethane foam to construct a portable visual sensing platform, which also successfully enabled the tri-mode and semi-quantitative detection of TNP. This work opens up a new avenue for the development of multi-signal detection systems for expanding their practical applications. Schematic illustration of the synthesis of B/N-CDs@SiO 2 and its application in TNP tri-mode sensing construction for TNP visual detection. Download: Download high-res image (187KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2026
·
IF 6.6
Kang Li,Yun Ding,Qing Mi,Qian Zhang,Xiaoyan Wei,Wanqi Wang,Yuan Sui,Ruizhi Hu,Bing Pan,Qing Yang
Low-temperature plasma polymerization enabled stable PANI grafting onto CEMs. • Membrane surface hydrophobicity was tuned to regulate the hydration-energy barrier. • Na + /Ca 2+ permselectivity increased from 0.70 to 6.06 after modification. • Hydration-mediated transport and concentration polarization jointly governed ion selectivity. • The modified membrane achieved high selectivity with only a slight loss of Na + flux. Monovalent-selective cation exchange membranes are crucial for water softening and resource recovery via electrodialysis (ED). However, effective separation of monovalent and divalent ions remains challenging due to small differences in charge and ionic size. This study employed low-temperature plasma grafting to covalently graft polyaniline onto cation exchange membrane substrates. Iodinated linear alkanes with varying carbon chain lengths were used to quaternize the polyaniline layer, modulating surface hydration energy. Increasing the carbon chain length enhanced membrane hydrophobicity, and the Na + /Ca 2+ permselectivity of the PANI-C 5 CEM increased from 0.70 to 6.06. In mixed-salt systems, Ca 2+ experienced stronger electrostatic repulsion and additional migration resistance due to the interception effect of surrounding Na + ions. This work demonstrates that integrating surface hydration energy regulation with ionic competition effects is an effective strategy for developing high-performance monovalent-selective membranes. Download: Download high-res image (199KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子