文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4117至4128个,产品总数6,840个

切换升序
Co2
NEW JOURNAL OF CHEMISTRY · 2022 ·Vol. 46 ·期 15 ·7153-7160 · IF 3.925

Controllable dispersion of cobalt phthalocyanine molecules on graphene oxide for enhanced electrocatalytic reduction of CO2 to CO

Weifeng Huang,Junqiang Li,Xiao Xu,Aihui Cao,Ying He,Miao Sun,Longtian Kang

Electrocatalytic reduction of CO2 with non-precious materials containing the Co–N–C moiety as a catalyst is considered to be a promising method to achieve carbon neutrality. Unfortunately, metal phthalocyanines with an intrinsic Co–pyrrolic N4–C structure usually show low electrocatalytic activity due to serious aggregation and low conductivity. Here, we exhibit a simple strategy to controllably disperse cobalt phthalocyanine (CoPc) on graphene oxide (GO) by the hydrolysis of protonated CoPc in GO aqueous phase. CoPc/GO nanocomposites with different ratios and structures could be easily obtained, and their effect on the electrocatalytic activity for the CO2 reduction reaction (CO2RR) to CO was systematically investigated. In the optimal sample, a CO selectivity of >96% can be achieved with an overpotential of <190 mV. Meanwhile, a CO Faradaic efficiency (FECO) of >90% can be reached within a wide potential range from −0.7 to −1.0 V (vs. RHE). The systematical experiments reveal that the synergy of CoPc and GO should be crucial owing to the existence of strong electrostatic interactions at the initial stage of hydrolysis and subsequent π–π, hydrogen bond and axial coordination interactions between CoPc and GO. This work exhibits a simple strategy to prepare molecule-based nanostructures as highly efficient electrocatalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of CO2 Utilization · 2022 · IF 8.321

Synthesis of single-atom dispersed Co-NC catalytic materials in supercritical CO2 environment with inorganic salt precursor

Jian-Lei Qi,Qin-Qin Xu,Dan Zhou,Jian-Zhong Yin

Supported single-atom catalytic materials (SACMs) have aroused extensive interest due to their remarkable properties. Herein, a novel method was proffered to prepare Co-NC SACMs using custom-designed N-doped carbon (NC) as support, CoCl 2 as the precursor in supercritical CO 2 with appropriate co-solvent. It was found that when ethanol was used as co-solvent, nanoparticles were obtained while only Co single-atom was obtained when N, N-Dimethylformamide (DMF) was used as co-solvent. Both the theoretical loading and the deposition time influenced the Co loading a lot, and the maximum Co loading was as high as 1.71 wt%. Strong acid, strong alkali, corrosive solvent, and high-temperature treatment were avoided in the whole process. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM), X-ray photoelectron spectroscopy (XPS), Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES), and Energy Dispersive X-ray spectroscopy (EDX) were conducted to confirm the existence and uniform distribution of Co atoms over the N-doped carbon materials. The conversion rate of 90.0% and selectivity of 86.0% were obtained for the solvent-free selective oxidation of benzyl alcohol to benzaldehyde at 70 °C and 1 h using the Co-NC SACMs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Interfacial engineering of In2O3/InN heterostructure with promoted charge transfer for highly efficient CO2 reduction to formate

Xiaoli Zhao,Ming Huang,Bangwei Deng,Kanglu Li,Fei Li,Fan Dong

Electrocatalytic reduction of CO 2 into value-added chemicals and fuels is of intensive urgence and importance to relieve the growing CO 2 emission and achieve the carbon neutrality. Herein, an In 2 O 3 /InN heterojunction was constructed and firstly utilized in electrocatalytic CO 2 reduction reaction (CO 2 RR) to formate with high Faradaic efficiency (95.7% at −1.48 V vs. RHE) and outstanding stability. The in-depth experimental analyses together with theoretical studies reveal that the O-N interaction at the interface between In 2 O 3 and InN could provide a charge transfer channel and lead to electron enrichment on the surface of InN, promoting the activation of CO 2 molecules, lowering the Gibbs free energy for the formation of *HCOO intermediate and strengthening the binding with *HCOO during CO 2 RR. This work provides a fundamental understanding of the interaction at In-based heterostructure interface for highly selective CO 2 reduction to formate and offers a universal route for the design of other type metal oxide/nitride heterostructures for various catalytic applications.

CAS / MDL: 57-13-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of CO2 Utilization · 2022 · IF 8.321

Direct synthesis of dimethyl carbonate from CO2 and methanol in dual supercritical phases over YxFe1−xOδ catalysts

Wen Sun,Lan Zheng,Yuqi Wang,Weihua Jia,Wenzhao Guo,Zhiru Liu,Xin Ding,Le Wu,Tao Fang

In this study, the dual supercritical phases were proposed and employed to facilitate the synthesis of dimethyl carbonate (DMC) from CO 2 and methanol, which may improve the diffusion rate and contact opportunities of reactant molecules. Under the novel reaction conditions, the synthesis temperature was higher than the supercritical temperatures of each reactant (>239 °C), and the partial pressure for each reactant constituent was larger than its partial supercritical pressure (p CO2 > 7.4 MPa & p methanol > 8.1 MPa), respectively. A series of Y x Fe 1−x O δ -T catalysts with perovskite-structure were applied in the dual supercritical phases, whose surface properties, crystal phase, microstructure, acidic−basic amounts, and the concentration of oxygen vacancies were detected by BET, XRD , SEM , NH 3 /CO 2 -TPD, XPS and EPR, respectively. It was evident from the characterization results that the Y 0.5 Fe 0.5 O δ -850 catalyst possessed the largest acidic−basic amounts, which enabled its highest catalytic activity . The experimental results revealed that higher DMC yield could be achieved under the novel dual supercritical phases (240 °C, 16 MPa), and the increased DMC yield without stirring in the autoclave can be obtained in an impressive shorter reaction time of 3 h, surpassing it acquired at the regular synthesis time of 9 h with stirring during the reaction.

CAS / MDL: 13494-98-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED MATERIALS · 2022 ·Vol. 34 ·期 16 ·2200756 · IF 32.086

Fabrication of Flexible Mesoporous Black Nb2O5 Nanofiber Films for Visible-Light-Driven Photocatalytic CO2 Reduction into CH4

Xi Lin,Shuhui Xia,Liang Zhang,Yuanyuan Zhang,Songmei Sun,Yuehui Chen,Shuo Chen,Bin Ding,Jianyong Yu,Jianhua Yan

Achieving high selectivity and conversion efficiency simultaneously is a challenge for visible-light-driven photocatalytic CO 2 reduction into CH 4 . Here, a facile nanofiber synthesis method and a new defect control strategy at room-temperature are reported for the fabrication of flexible mesoporous black Nb 2 O 5 nanofiber catalysts that contain abundant oxygen-vacancies and unsaturated Nb dual-sites, which are efficient towards photocatalytic production of CH 4 . The oxygen-vacancy decreases the bandgap width of Nb 2 O 5 from 3.01–2.25 eV, which broadens the light-absorption range from ultraviolet to visible-light, and the dual sites in the mesopores can easily adsorb CO 2 , so that the intermediate product of CO* can be spontaneously changed into *CHO. The formation of a highly stable Nb  CHO* intermediate at the dual sites is proposed to be the key feature determining selectivity. The preliminary results show that without using sacrificial agents and photosensitizers, the nanofiber catalyst achieves 64.8% selectivity for CH 4 production with a high evolution rate of 19.5 µmol g −1 h −1 under visible-light. Furthermore, the flexible catalyst film can be directly used in devices, showing appealing and broadly commercial applications.

CAS / MDL: 1313-96-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2022 · IF 5.089

Bottom-up oriented synthesis of metalloporphyrin-based porous ionic polymers for the cycloaddition of CO2 to epoxides

Yongjian Qiu,Yaju Chen,Lin Lei,Xilun Wang,Xiaojing Zeng,Zhengfeng Feng,Chunyan Deng,Dongying Lin,Hongbing Ji

Porphyrin-bearing porous materials have attracted great interest in the field of CO 2 chemical fixation, yet one-pot fabricating networks with multifunctionality through bottom-up oriented synthetic method is still scarce and balancing the multifunction and the porosity remains challenging. Herein, we designed an ionic liquid-based building unit with rigidity and contortion and then synthesized a porous ionic polymers (PiPs) consisting of electrophilic metalloporphyrin and nucleophilic imidazolium ionic liquids (ILs) units by “Adler-Longo” methodology and metallization reaction. The as-prepared bifunctional polymer ZnPor-PiP possessed improved specific surface area, abundant micro/mesoporosity, noteworthy CO 2 uptake and acceptable CO 2 /N 2 selectivity. Legitimately, ZnPor-PiP exhibited good catalytic performance for the synthesis of cyclic carbonates from CO 2 and epoxides under mild conditions owning to the cooperative effect between the metal active center and the IL moieties, as well as the unique structural properties. Intriguingly, ZnPor-PiP gave a good substrate expansibility for this cycloaddition reaction and showed no obvious decrease in catalytic activity over six recycles. Furthermore, this bifunctional solid catalyst could efficiently convert diluted CO 2 (15% CO 2 in N 2 ) with propylene epoxide into propylene carbonate at 100 °C and 3.0 MPa. This bottom-up oriented strategy is of great importance for the development of functionalized porphyrin-based PiPs and the as-designed polymers highlights the potential for targeting CO 2 capture and transformations.

CAS / MDL: 109-97-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2022 · IF 24.319

Photoredox coupling of benzyl alcohol oxidation with CO2 reduction over CdS/TiO2 heterostructure under visible light irradiation

Ming-Yu Qi,Qiong Lin,Zi-Rong Tang,Yi-Jun Xu

Coupling CO 2 photoreduction with selective organic synthesis offers a promising modus operandi to enable simultaneous utilization of photogenerated electrons and holes to realize solar fuels production and chemicals synthesis. Herein, we report a bifunctional zero-dimensional cadmium sulfide quantum dots-two-dimensional titanium dioxide nanosheets (CdS/TNS) heterostructure for photoredox-catalyzed coupling of C–C bond synthesis via selective oxidation of benzyl alcohol with CO 2 photoreduction to CO under visible light. The compositing heterointerface is beneficial for the adsorption and activation of CO 2 , thereby promoting the photoreduction of CO 2 . Remarkably, the synergistic interaction between CdS and TNS tunes the selectivity of benzyl alcohol oxidation from carbonyl compound to the C–C coupled products. Mechanistic studies unveil that the generation of C–C coupled products processes via key radical •CH(OH)Ph intermediates. Theoretical simulations reveal that the weaker adsorption of •CH(OH)Ph radical over CdS/TNS than bare CdS contributes to the formation of highly selective C–C coupled products. The findings are expected to offer instructive guidance on rationally designing the dual-functional catalysts with efficient photoredox-catalyzed coupling reaction systems for integrating CO 2 reduction with selective organic transformations.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2022 · IF 24.319

Understanding the role of metal and N species in M@NC catalysts for electrochemical CO2 reduction reaction

Manfen Liang,Yu Liu,Jie Zhang,Fangyuan Wang,Zhichao Miao,Lechen Diao,Jinglin Mu,Jin Zhou,Shuping Zhuo

The electrochemical CO 2 reduction reaction (CO 2 RR) that transforms CO 2 to CO has attracted great interest. Transition metal nanoparticles encapsulated in nitrogen-doped carbon (M@NC) catalysts exhibit outstanding catalytic performance. However, the role of metal and N species in M@NC catalysts remains unclear. In this work, Co@C, Co@NC, Ni@C, and Ni@NC catalysts were achieved and employed in CO 2 RR. The Ni@NC catalyst exhibits an industry level current density of 220 mA cm −2 and a high Faradaic efficiency of 98% for CO production at − 0.87 V vs. RHE for 100 h. In addition, the N species, especially the pyrrolic-N in the shell of Ni@NC material provide active sites for adsorbing and activating CO 2 molecules, and metal nanoparticles improve the electronic structure of N species, thereby decreasing their ability for radical attack (*COOH, *CO, and *H). Consequently, this work can guide the design of M@NC catalyst for CO 2 RR to CO.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2022 · IF 24.319

Heterogenizing homogeneous cocatalysts by well-designed hollow MOF-based nanoreactors for efficient and size-selective CO2 fixation

Ze Qin,Hao Li,Xianfeng Yang,Liyu Chen,Yingwei Li,Kui Shen

The fixation of CO 2 with epoxides is a promising strategy to reduce CO 2 emission. However, homogeneous halogen-based cocatalysts are often requisite for most heterogeneous catalysts to obtain desired activities, which significantly complicates the subsequent product purification/separation. Herein, we report the heterogenization of homogeneous Br-based cocatalysts by encapsulating them into stable and recyclable ZIF-8-based hollow nanoreactors (ZIF-8-HS) for efficient CO 2 fixation. The synthesis involves in epitaxial growth of a size-controlled ZIF-8 layer on hollow ZIF-67 spheres prepared by using Br-contained surfactants as templates, followed by etching the unstable ZIF-67 shell. In ZIF-8-HS, the Br-contained surfactants can serve as efficient cocatalysts to activate substrates, while the microporous ZIF-8 shell possesses abundant intrinsic active sites and offers the cocatalysts a confined homogeneous environment. Impressively, ZIF-8-HS shows high activity, good size-selectivity and excellent recyclability for the CO 2 fixation with epoxides, fully exploiting the respective advantages of homogeneous CTAB and heterogeneous ZIF-8 for this reaction.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR LIQUIDS · 2022 · IF 6.633

Regulation of anionic structure and CO2 on the vesicle formation of imidazolium-based ionic liquids in water

Xiaohui Li,Yingying Guo,Huiyong Wang,Zhiyong Li,Jianji Wang

The understanding of vesicle formation mechanism of ionic liquids (ILs) in aqueous solution is of great significance for the innovation and application of IL vesicles. In this work, a series of single-tailed amphiphilic ionic liquids (ILs) consisted of 1-tetradecyl-3-methylimidazolium [C 14 mim] + and five kinds of anions have been designed to examine the regulation of anionic structures on the vesicle formation of ILs in water without any additives by surface tension, conductivity, cryogenic transmission electron microscopy, dynamic light scattering, small-angle X-ray scattering, and NMR spectroscopy. It is found that synergistic effect of hydrophobic and π-π interaction plays a vital role in the vesicle formation of 1-tetradecyl-3-methylimidazolium 1, 2, 3-benztriazole ([C 14 mim][1, 2, 3-Ben]). Interestingly, reversible structural transition between vesicle and micelle of this IL is observed by alternating CO 2 and N 2 bubbling due to the reversible formation of carbamate arising from the reaction between CO 2 and the anion of the IL.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2022 · IF 9.136

Novel and versatile PEI modified ZIF-8 hollow nanotubes to construct CO2 facilitated transport pathway in MMMs

Rui Ding,Qiuchen Wang,Xuehua Ruan,Yan Dai,Xiangcun Li,Wenji Zheng,Gaohong He

1D nanotube (HNT) based MMM presents high CO 2 permeation due to its long and hollow structure. However, the improvement of selectivity is still challenging. In this study, small PEI molecules with abundant amino groups were introduced into the nanocages of ZIF-8 HNTs to construct facilitated CO 2 transmission channel with low resistance. In the PEI@ZIF-8 HNTs, the –NH 2 groups can facilitate CO 2 transport in presence of H 2 O, resulting in an improvement in both CO 2 permeability and selectivity. Second, the introduction of PEI into the nanocages of ZIF-8 can adjust the effective sieving size to enhance CO 2 selectivity. Third, the hydrogen bond between PEI and Pebax can strengthen the interfacial compatibility, further improving CO 2 /N 2 selectivity of the MMMs. Finally, the 1D hollow structure of PEI@ZIF-8 HNTs provides CO 2 molecules with low-resistance and fast transport channel, enhancing the CO 2 permeability. Consequently, both the high CO 2 permeability and the high CO 2 /N 2 selectivity are acquired by the versatile filler of PEI@ZIF-8 HNTs. PEI@ZIF-8 HNTs based MMM at filler loading of 7 wt% under dry mixed gas, presents CO 2 permeability of 177 Barrer and CO 2 /N 2 selectivity of 72, which are 40% and 10.8% higher than those of ZIF-8 HNTs based MMM, respectively. Moreover, the permeability of CO 2 and the selectivity of CO 2 /N 2 reach 306 Barrer and 79 respectively under the wet mixed gas, which is far beyond the Robeson upper bound in 2008 and exceeds the McKeown upper bound in 2019. The proposed PEI@ZIF-8 HNTs are believed to be promising filler for MMMs based CO 2 capture.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Coordination environment engineering to boost electrocatalytic CO2 reduction performance by introducing boron into single-Fe-atomic catalyst

Shuai Liu,Mengmeng Jin,Jiaqiang Sun,Yongji Qin,Sanshuang Gao,Yu Chen,Shusheng Zhang,Jun Luo,Xijun Liu

Electrocatalytic CO 2 reduction reaction (CRR), powered by renewable energy sources, is a promising route to address energy and environmental issues. Herein, we fabricate single atomic Fe sites anchored on B and N co-doped carbon (Fe-SA/BNC), which showed excellent CRR activity, achieving a highest Faradaic efficiency of ∼ 94% at −0.7 V versus reversible hydrogen electrode. The performance is much better than that of the B-free sample. Furthermore, an outstanding current density of ∼ 130 mA cm −2 , as well as ∼ 99% Faradaic efficiency, has been achieved using the membrane electrode assembly (MEA). Details of density functional theory (DFT) calculations revealed that the introduction of B was beneficial for the desorption of *CO. The Zn-CO 2 battery was then assembled, which reached a high peak power density of 1.18 mW cm −2 at a current density of 4 mA cm −2 , as well as showing remarkable stability for CO production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。