JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2017
·
IF 4.421
Hengjia Zhu,Jianming Pan,Jun Cao,Yue Ma,Fengxian Qiu,Wenli Zhang,Yongsheng Yan
Herein we reported a facile method to prepare porous ion/molecule imprinted polymers (I-MIPs) via twice imprinting strategy for the simultaneous uptake of copper ions (Cu(II)) and λ-cyhalothrin (LC). Firstly, N -(β-aminoethyl)-γ-aminopropytrimethoxysilane (DAMO) was grafted on silica particles surface to synthesis Cu(II)-imprinted polymers to introduce iron imprinted sites. They were then utilized as stabilizers to prepare a stable W/O Pickering HIPEs template (LC as the imprinting molecule), which was then polymerized with dual imprinting sites including Cu(II) and LC. The adsorption equilibrium, kinetic results and selective recognition experiments were exhibited their prospected dual selectivity and simultaneous removal of LC and Cu(II).
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2024
·
IF 4.1
Hongjing Pei,Yanmei Han,Yong Liu,Xu Han
Although copper-aliphatic amines have been extensively used as catalysts for the polymerization of 2,6-dimethylphenol (DMP) to poly (2,6-dimethyl-1,4-phenylene oxide) (PPO), the high polydispersity index (PDI) of PPO and high content of 3,3′,5,5′-tetramethyl-4,4'diphenoquinone (DPQ) in PPO significantly affect the physical properties of PPO . In this study, different CuBr-aromatic amines have been used as catalysts for synthesizing PPO. CuBr– N -methylbenzylamine shows a high yield of PPO (94.4 %) with the low DPQ yield (0.46 %) and PDI (1.33) in the presence of 0.1 % H 2 O, which facilitates the formation of dinuclear Cu(Ⅱ) species. In addition, the low dielectric constants (2.43 and 2.25) and low dielectric loss factors (1.07 × 10 −3 and 1.29 × 10 −3 ) of the PPO synthesized by CuBr– N -methylbenzylamine and CuBr-4-aminopyridine again indicate that aromatic amines are more appropriate for the synthesis of PPO with superior dielectric properties . Meanwhile, the high-molecular-weight PPO can be successfully redistributed to low-molecular-weight PPO by adding DMP in the presence of CuBr– N -methylbenzylamine, and the decreased T g values from 212.5 to 187.8 °C with decreasing M n values from 2.7 × 10 4 to 5.5 × 10 3 indicate the improved processability of the low-molecular-weight PPO. This study provides new insights on important roles of aromatic amines in the synthesis of PPO.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2024
·
IF 3.5
Zihao Hu,Xiaoying Zhou,Tiantian Zhang,Zuliang Wu,Jing Li,Wei Wang,Erhao Gao,Jiali Zhu,Shuiliang Yao
Aiming at the problem of the poor performance of an Mn-MOF-74-derived Mn3O4 catalyst in low-temperature carbon monoxide (CO) oxidation, copper (Cu) and cerium (Ce) elements were used to modify the Mn3O4 catalyst to improve its performance in low-temperature CO oxidation. According to the results of catalytic performance testing, the CO oxidation activity of the Cu0.3Mn2.7O4 catalyst was significantly improved compared with that of the pristine Mn3O4 catalyst, when a CO conversion rate of 90% was achieved at 118 °C. According to X-ray photoelectron spectroscopy and Brunauer–Emmett–Teller analyses, the (Mn2+ + Mn3+)/(Mn2+ + Mn3+ + Mn4+) ratio and the Oads/Ototal ratio increased after Cu doping, indicating promoted oxygen vacancy generation. In addition, the increased specific surface area was beneficial for the adsorption of reactant molecules and the exposure of active sites. According to H2-temperature-programmed reduction characterization, Cu doping significantly enhanced the performance of the Cu0.3Mn2.7O4 catalyst during low-temperature redox. Finally, these factors synergistically promoted the degradation of CO over the Cu0.3Mn2.7O4 catalyst. In addition, operando diffuse reflectance Fourier transform infrared spectroscopy results suggested the presence of more terminal-type oxygen, which is essential for the catalytic oxidation of CO on the surface of the Cu0.3Mn2.7O4 catalyst. Moreover, the Cu0.3Mn2.7O4 catalyst also showed excellent resistance to carbonate, and remarkable stability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF PHARMACEUTICS
·
2024
·
IF 5.3
Luping Ren,Yanfang Sun,Junhao Zhang,Lei Nie,Amin Shavandi,Khaydar E. Yunusov,Uladzislau E. Aharodnikau,Sergey O. Solomevich,Guohua Jiang
Nanoformulations for combining chemotherapy, chemodynamic therapy, and photothermal therapy have enormous potential in tumor treatment. Coating nanoformulations with cell membranes endows them with homologous cellular mimicry, enabling nanoformulations to acquire new functions and properties, including homologous targeting and long circulation in vivo , and can enhance internalization by homologous cancer cells. Herein, we fused multifunctional biomimetic nanoformulations based on Cu-doped zeolitic imidazolate framework-8 (ZIF-8). Hydroxycamptothecin (HCPT), a clinical anti-tumor drug, was encapsulated into ZIF-8, which was subsequently coated with polydopamine (PDA) and red blood cell membrane. The as-fabricated biomimetic nanoformulations showed an enhanced cell uptake in vitro and the potential to prolong blood circulation in vivo , producing effective synergistic chemotherapy, chemodynamic therapy, and photothermal therapy under the 808 nm laser irradiation. Together, the biomimetic nanoformulations showed a prolonged blood circulation and evasion of immune recognition in vivo to provide a bio-inspired strategy which may have the potential for the multi-synergistic therapy of breast cancer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2024
·
IF 8.1
Xiaomei Xu,Bilu Yang,Zhaodi Xu,Qiaoling Mo,Xiaomei Shen,Hu Cai
In the pursuit of advancing the production of H 2 through hydrogen-evolution reaction (HER), the demand for the elaborate design of cost-effective and robust durability electrocatalysts has gained momentum, especially replacement of noble-metal counterparts like Pt. Herein, we introduce a facile one-pot hydrothermal approach to synthesize nickel foam-supported Ni 3 S 2 nanosheet arrays, which integrate with carbon-quantum-dot (CQDs) and Cu, Mo dual-metal doped. With the introduction of CQDs and Cu, Mo dual-metal doped site, the optimal CQDs-Cu-Mo-Ni 3 S 2 @NF exhibits superior HER catalytic activity with a low overpotential of 125 mV at 10 mA·cm −2 and strong durability for 30 h in alkaline medium. The exceptional electrocatalytic performance is ascribed to the synergistic effect of CQDs and Cu, Mo dual-metal site. This synergy encompasses optimization of water molecule adsorption/desorption energetics , elevated electrical conductivity , weakening of the strong S–H bond interaction on the Ni 3 S 2 surface, and providing ample active centers. Furthermore, an in-depth understanding of the electronic structure and adsorption energy during the HER process is probed by density functional theory (DFT) analysis. Our work provides a quintessential paradigm for the rational design of multi-component electrocatalysts for water splitting.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Xu Wang,Shuming Wen,Songlin Chen,Lifang He,Guang Han,Qicheng Feng
Conventional collectors based on xanthate utilized in the flotation process for separating Cu–Fe sulfide minerals are hindered by issues such as low selectivity, the need for large dosages, and environmental implications. This study investigated the synergistic adsorption behavior of a binary collector system composed of sodium dibutyldithiocarbamate (SD) and ammonium dibutyldithiophosphate (ADD) on chalcopyrite surfaces. Micro-flotation tests indicated that the SD/ADD mixture significantly improved flotation performance compared to the individual collectors. With a total concentration of the collector at 5 × 10⁻ 5 mol/L and a molar ratio of ADD to SD set at 2: 3, chalcopyrite recovery reached 94.64 %, with an increase of approximately 33 % over that achieved with a single collector. Surface characterization results confirmed that SD and ADD co-adsorb onto chalcopyrite through both physical and chemical interactions, forming a hydrophobic surface layer. In contrast, under lime-treated suppression conditions, the adsorption of the mixed collectors on pyrite was effectively inhibited. Molecular dynamics simulations further revealed that SD and ADD co-adsorb onto the (112) crystal plane of chalcopyrite. These findings confirm the combined influence of SD and ADD in improving the flotation efficiency of chalcopyrite and present a potential reagent system for the flotation separation of Cu–Fe sulfide minerals.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2015
·
IF 3.545
Maofang He,Chaozhan Wang,Yinmao Wei
In this paper, iminodiacetic acid-Cu(II) functionalized Fe 3 O 4 @SiO 2 magnetic nanoparticles were prepared and used as new adsorbents for magnetic solid phase extraction (MSPE) of six monoamine neurotransmitters (MNTs) from rabbit plasma. The selective enrichment of MNTs at pH 5.0 was motivated by the specific coordination interaction between amino groups of MNTs and the immobilized Cu(II). The employed weak acidic extraction condition avoided the oxidation of MNTs, and thus facilitated operation and ensured higher recoveries. Under optimal conditions, the recoveries of six MNTs from rabbit plasma were in the range of 83.9–109.4%, with RSD of 2.0–10.0%. When coupled the Cu(II) immobilized MSPE with high-performance liquid chromatography-fluorescence detection, the method exhibited relatively lower detection limits than the previously reported methods, and the method was successfully used to determine the endogenous MNTs in rabbit plasma. The proposed method has potential application for the determination of MNTs in biological samples. Also, the utilization of coordination interaction to improve the selectivity might open another way to selectively enrich small alkaloids from complex samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·Vol. 49
·期 24
·10338-10356
·
IF 2.5
Fan Bai,Yanjiao Gao,Yongbo Xiao,Jingyi Yang,Jiaxin Chen,Jing Xiao
In recent years, advanced oxidation based on periodate (PI) has become a research focus for disposal of recalcitrant organics from water due to its efficient oxidizing ability. This study systematically investigated the degradation of reactive black 5 (RB5) by the Cu(II)-activated sodium periodate (NaIO4, SPI) system. The optimal reaction conditions were determined via Box–Behnken response surface methodology as [Cu(II)] = 1.013 ± 0.021 g L−1, [SPI] = 45 ± 2 μM, and pH = 5.7 ± 0.3, achieving a RB5 removal rate of 91.98% (R2 = 0.9901, prediction error <1%). The free radical quenching experiment confirmed that the dominant ROS in the system were ˙OH, 1O2, and IO3˙, and their contribution was IO3˙ > 1O2 > ˙OH. The coexistence anion experiments showed that Cl− (0.1–5.0 mM) and SO42− (0.1–5.0 mM) had almost no effect on the RB5 degradation efficiency, with inhibition rates lower than 1.99% and 3.58%, respectively, while CO32− (1.0 mM) and HCO3− (1.0 mM) led to a decrease of 20.8% and 14.17% in the RB5 degradation rate. In the presence of HA, the degradation efficiency of RB5 was maintained at 89.88–92.66%. The system maintained a removal rate of 73.33–87.66% for RB5 in the simulated actual water bodies (tap water/river water/brewery wastewater). Energy-assisted experiments showed that the activation energy of the reaction was significantly reduced and the kobs values were increased by 10.3 times when the temperature was increased to 40 °C, and the reaction time could be shortened to 2 min (removal rate >98%) after ultraviolet (365 nm, 20 W) coupling. In summary, this study is expected to support the related PI-based advanced oxidation process in stubborn pollutant treatment.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Qiong Wu,Jingfan Yan,Fumin Chu,Yanpeng Huang,Yuming Xu,Siyu Jia,Sen Yang
Simple wet chemical method was used to prepare Cu(OH) 2 nanowire-coated copper mesh (denoted as Cu(OH) 2 -CM). Following modification with phytic acid (PA) and polyethyleneimine (PEI), superhydrophilic/underwater superoleophobic copper mesh (denoted as Cu(OH) 2 /PA/PEI-CM) with excellent mechanical and chemical stability was obtained. The Cu(OH) 2 /PA/PEI-CM exhibited efficient separation for various oil/water mixtures. Importantly, Cu(OH) 2 /PA/PEI-CM shows superior anti-crude oil fouling properties. A 280-cycle test (with only four cleanings) using a 2 cm 2 Cu(OH) 2 /PA/PEI demonstrates a large separation capacity, long-term stability and self-cleaning performance of the mesh during the treatment of a 11.2 L crude oil/water mixture. These distinct advantages give the Cu(OH) 2 /PA/PEI-CM great potential for practical application in separating oil pollutants from water.
✓ 已验证
DOI
高影响因子
Chemical Engineering Journal Advances
·
2025
·
IF 7.1
Yan Li,Shunli Wan,Zhenbao Liang,Wenjing Zhou,Ran Chen,Qidi Liu,Yixin Ma
Owing to the limited pore structure and surface charged groups, it is still challenging for biochar (BC) as the host of metallic oxide nanoparticles to achieve the highly efficient treatment of heavy metals in water. To overcome this barrier, a highly porous and charged biochar (LABC) was developed as supporter to load hydrated ferric oxide (HFO), and a new nanocomposite HFO-LABC was acquired for heavy metal decontamination. The increased and enlarged pores from KHCO 3 for LABC activation apparently cut down adsorption equilibrium time of HFO-LABC to Cd(II) and Cu(II) (within 10 min) by reducing pore diffusion resistance of targeted metals. The predicted pore diffusion coefficient D is 2.3 ☓10 –8 and 3.6 ☓10 –8 cm 2 /s for Cd(II) and Cu(II) in HFO-LABC, respectively, about 10 times higher than that in HFO-BC (2.1 ☓10 –9 and 3.7 ☓10 –9 cm 2 /s). The introduced charged groups onto LABC notably enhanced Cd(II) and Cu(II) adsorption on HFO-LABC through promoting the dispersion of the loaded nanoparticles (size < 10 nm) and the potential Donnan membrane effect. Consequently, Fe-normalized adsorption capacities of Cd(II) and Cu(II) on HFO-LABC of 976.23 and 1170.77 mg/g-Fe are much greater than those on HFO-BC (299.50 and 510.92 mg/g-Fe). Moreover, HFO-LABC can achieve advanced treatment for synthetic and real Cd(II) and Cu(II)-polluted wastewater in cyclic batch system, with treatment capacities of 1500, 3500 and 8000, 4500 mL/g-HFO-LABC. In addition, the spent HFO-LABC can achieve complete regeneration using HCl-CaCl 2 binary solution with desorption rate >95 %.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 6
·1-10
·
IF 5.3
Ren Dongxia,Wang Lin,Wei Hua,Mu Shijie,Yang Longfei
Bacterial infection is one of the leading causes of human death globally and is considered to be an urgent public health challenge. It is important to accurately and rapidly detect and kill pathogenic microorganisms. Therefore, a multifunctional platform for sensitive detection and efficient elimination of pathogenic bacteria should be developed to reduce the threat of bacteria. In this study, an integrated strategy based on Fe 3 O 4 -quaternary ammonium chitosan-polyetherimide-Cu-aptamer (Fe 3 O 4 -QCS-PEI-Cu-aptamer) and ladder-branch hybridization chain reaction (HCR) was proposed for the detection and inactivation of Staphylococcus aureus ( S. aureus ). The aptamer-complementary chain (aptamer-CP) conjugated to the surface of Fe 3 O 4 -QCS-PEI-Cu induces CP release in the presence of S. aureus , further initiating the ladder-branch HCR reaction and achieving signal amplification. Under optimal conditions, the developed sensor demonstrated a limit of detection (LOD) of 3 CFU/mL for S. aureus and exhibited high selectivity against several other pathogenic bacteria. Moreover, the Fe 3 O 4 -QCS-PEI-Cu-aptasensor showed potent antibacterial properties under near infrared (NIR) irradiation, achieving an antimicrobial efficiency of 99.946%. This strategy synergistically combined the high-sensitivity molecular detection with the antibacterial activity of novel nanomaterials activated by near infrared light, providing a new insight into the prevention of bacterial infections. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 11
·1-10
·
IF 6.232
Chen Xiaolong,Wang Xianfeng,Cao Gaihua,Wu Yawen,Luo Huibo,Ji Zhong,Shen Caihong,Huo Danqun,Hou Changjun
Hemin as the organic linker ligand and Cu (II) as the metal center were applied to prepare a copper-metal-organic framework (Cu-hemin-MOF) via one-step hydrothermal method. Characterization using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray powder diffraction (XRD) demonstrate that the acquired Cu-hemin-MOF possesses the appearance of 3D ball-flower shape with the existence of C, N, O, Fe, and Cu on the surface. Further study found that this 3D ball-flower shaped Cu-hemin-MOF exhibits peroxidase-like activity, which can catalyze the peroxidase substrate of o-phenylenediamine (OPD) to generate 2,3-diaminophenazine (DAP) in the presence of H 2 O 2 . DAP has a yellow color and also emits a strong fluorescence when excited by ultraviolet light. Interestingly, Cu-hemin-MOF’s peroxidase-like activity can be strongly inhibited by glutathione (GSH). In view of this, a dual readout (fluorescence and colorimetry) was proposed to detect GSH for the first time. Under optimal conditions, the proposed method exhibits good linear relationship between the signal response (fluorescence and colorimetry) and the concentration of GSH, and low limits of detection (LOD) of 2.3 and 26.6 nM, respectively. Graphical abstract
✓ 已验证
DOI
PubMed
高影响因子