Inorganic Chemistry Frontiers
·
2016
·Vol. 4
·期 1
·144-153
·
IF 4.532
Qiao Sun,Min Liu,Keyan Li,Yitong Han,Yi Zuo,Fanfan Chai,Chunshan Song,Guoliang Zhang,Xinwen Guo
Partial isomorphic substitution of iron in an Fe(BDC)(DMF,F) metal organic framework by manganese, cobalt, and nickel has been described for the first time. Specifically, different amounts of Mn, Co and Ni have been incorporated into the Fe-based framework during a solvothermal crystallization procedure. Several characterization techniques, including XRD, FT-IR, SEM, EDS, TG, XPS and ICP-AES, strongly support the effective incorporation of Mn, Ni and Co into material frameworks. The catalytic performance of these materials was examined in liquid-phase degradation of phenol at 35 °C and near neutral pH of 6.2. The results show that the degradation efficiency can be evidently improved by the incorporation of Mn, while it can be inhibited by the incorporation of Ni. The incorporation of Co shows no remarkable influence on the degradation process. Moreover, the ratios of n(Fe)/n(Mn) in the bimetallic MOFs have a strong impact on the degradation process. The stability and reusability of these catalysts under mild conditions were also demonstrated in this study. This work illustrates the potential of bimetallic MOF structures in developing active heterogeneous catalysts for the degradation process of toxic compounds.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2016
·Vol. 24
·期 1
·45-54
·
IF 1.385
Ma Jing,Xu Shangyuan,Chu Jia,Xue Juanqin,Tang Jieli,Qiang Liangsheng
In this paper, a series of metal supported TiO 2 /SBA-16 photocatalysts were successfully synthesized by wet impregnation method. The synthesized samples were characterized by X-ray diffraction (XRD), Raman spectra, N 2 adsorption–desorption, transmission electron microscopy (TEM), UV–visible absorption spectra (UV-vis) and X-ray photoelectron spectroscopy (XPS). It was found that SBA-16 retained the ordered mesostructure after modification. The results shown that loading different metal elements was found to have significant influences on the crystallographic structure and physical properties. Moreover, the prepared materials were evaluated on photodegradation of Rhodamine B (RhB). Experiment results showed that the degradation of RhB by these catalysts follows the pseudo-first-order kinetic model. The effect of metal element on photocatalytic activity can be attributed that the appropriate amounts of metal concentration can enhance the photocurrent due to the reduced electron–hole recombination, which can improve the efficiency of photocatalytic reactions.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2017
·Vol. 184
·期 7
·2291-2298
·
IF 4.58
Wu Huifang,Jiang Jiahui,Gu Xiaoting,Tong Changlun
Nitrogen and sulfur co-doped carbon quantum dots (N,S-CQDs) with a high quantum yield (69%) and excellent photoluminescent properties were synthesized via a facile hydrothermal method using citric acid and cysteine as precursors. The cytotoxicity of N,S-CQDs was evaluated through the MTT assays using HepG2 cells as the target. The cell viability is still >95% after a 24 h incubation with particles in a concentration of up to 300 μg·mL −1 , thereby indicating low cytotoxicity and excellent biocompatibility of N,S-CQDs. The emission spectra of the N,S-CQDs are nearly independent of the excitation wavelengths in the range from 280 to 380 nm and have the strongest fluorescence emission centered at 415 nm. Co-doping with N and S promotes the electron-transfer rate and coordination interaction between N,S-CQDs and Fe(III) ions which acts as a quencher of fluorescence. Fluorescence can be recovered, however, by addition of L-Cys. Hence, the N,S-CQDs act as a highly sensitive and selective “turn-off-on” probe for the determination of Fe(III) or Cys. The limits of detection are 14 nM for Fe(III) and 0.54 μM for Cys. The interferences by 17 common metal ions and heavy metal ions, 12 other quenchers and 16 amino acids were investigated and found to be tolerable. The probe was successfully applied for cellular imaging of Fe(III) in HepG2 cells by using fluorescence microscopy.
Nitrogen and sulfur co-doped carbon quantum dots (N,S-CQDs) with a high quantum yield of 69% were prepared through a facile one-step hydrothermal method. They are shown to be a highly sensitive and selective fluorescent “turn-off-on” probe for Fe(III) ions and cysteine.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2014
·Vol. 21
·期 7
·5201-5210
·
IF 2.757
Chen Xi,Yao Xiaoyan,Yu Chunna,Su Xiaomei,Shen Chaofeng,Chen Chen,Huang Ronglang,Xu Xinhua
Soil pollution by polychlorinated biphenyls (PCBs) arising from the crude disposal and recycling of electronic and electrical waste (e-waste) is a serious issue, and effective remediation technologies are urgently needed. Nanoscale zerovalent iron (nZVI) and bimetallic systems have been shown to promote successfully the destruction of halogenated organic compounds. In the present study, nZVI and Pd/Fe bimetallic nanoparticles synthesized by chemical deposition were used to remove 2,2′,4,4′,5,5′-hexachlorobiphenyl from deionized water, and then applied to PCBs contaminated soil collected from an e-waste recycling area. The results indicated that the hydrodechlorination of 2,2′,4,4′,5,5′-hexachlorobiphenyl by nZVI and Pd/Fe bimetallic nanoparticles followed pseudo-first-order kinetics and Pd loading was beneficial to the hydrodechlorination process. It was also found that the removal efficiencies of PCBs from soil achieved using Pd/Fe bimetallic nanoparticles were higher than that achieved using nZVI and that PCBs degradation might be affected by the soil properties. Finally, the potential challenges of nZVI application to in situ remediation were explored.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2013
·
IF 3.172
Mengjie Pu,Yongwen Ma,Jinquan Wan,Yan Wang,Mingzhi Huang,Yangmei Chen
Fe/S doped granular activated carbon (Fe/SGAC) was synthesized with ferric nitrate, Na 2 S 2 O 3 and (NH 4 ) 2 S 2 O 8 via an impregnation–precipitation, reduction–oxidation combining with aqueous-phase synthesis method treatment. Surface density of functional groups, surface area changes as well as the chemical state inside Fe/SGAC catalyst were studied by Boehm titration, N 2 adsorption and X-ray photoelectron spectroscopy (XPS). The reactivity of the catalysts was tested by degrading Orange G (OG) and diethyl phthalate (DEP). The Fe/SGAC catalysts could significantly enhance the removal rate of OG as compared to persulfate alone and PS/GAC. And the catalytic capacity was also enhanced by S doping. But the degradation of DEP under the similar condition was inhibited by adsorption process because of the different hydrophobicities of OG and DEP molecule. Fe 2 O 3 /FeOOH (Fe 3+ ) (represents ferrihydrite) together with FeO/Fe 3 O 4 (Fe 2+ ) and Fe 2 O 3 -satellite, which provide the new active site for persulfate catalyst was found to be the major components of iron element in Fe/SGAC catalyst; the existence of FeS 2 (S − ) for sulfur element verified the assumption that the doped S element promoted the electron transfer between the persulfate species and iron oxide at the interface. COD removal experiment further confirmed that mostly contaminant removal was owed to the Fe/SGAC catalytic persulfate oxidation process.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysis Science & Technology
·
2014
·Vol. 4
·期 12
·4308-4312
·
IF 4.76
Ran Ma,Cheng-Bin Huang,An-Hua Liu,Xue-Dong Li,Liang-Nian He
An environmentally benign CO2/glycol reversible acidic system was developed for the iron(III)-catalyzed aerobic oxidative iodination of electron-rich aromatics without the need for any conventional acid additive or organic solvent. Notably, moderate to high isolated yields (up to 97%) of the aryl iodides were attained with comparable regioselectivity when ferric nitrate nonahydrate was used as the catalyst with molecular iodine under 1 MPa of CO2.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2014
·
IF 4.058
Donghui Han,Jinquan Wan,Yongwen Ma,Yan Wang,Mingzhi Huang,Yangmei Chen,Dongya Li,Zeyu Guan,Ying Li
Oxidative decolorization of Orange G (OG) in Fe(II)/(S,S)-ethylenediamine-N,N′-disuccinic acid (EDDS)/persulfate (PS) process was investigated. Hydroxylamine was combined to accelerate the Fe(II) recovery for improvement of PS activation. Effects of the reagents dosage, pH, and hydroxylamine adding mode were evaluated in batch experiments. All the decolorization experiments were performed at 25 °C within 180 min and with initial OG concentration ranging from 0.25 to 2.5 mM. The results indicated that EDDS decreased the Fe(II) accessibility to 11.9% at the molar ratio of EDDS/Fe(II) = 1/1 and could improve the OG decolorization by slowing down the Fe(II) depletion rate. The addition of hydroxylamine was effective in further enhancement of the oxidative ability and 98% OG decolorization was obtained rapidly with only 50.6% PS decomposition when hydroxylamine/Fe(II) = 8/5. The combination of EDDS and hydroxylamine could expand the effective pH range up to 7. The hydroxylamine adding mode also played a significant role and OG decolorization efficiency was 49.4%, 67.7% and 70.7% when adding times was 1, 3 and 5, respectively. In addition, under the condition of PS/Fe(II)/hydroxylamine = 5/10/16, OG suffered incomplete decolorization up to 71.8% due to the insufficient PS dosage, while a decline of OG decolorization was observed as well when PS/Fe(II)/hydroxylamine = 80/10/16 because of the intensive consumption of hydroxylamine and hydroxyl radicals ( OH) by excessive PS. The radicals characterization via electron spin resonance (ESR) technique was also conducted and the results indicated hydroxyl radicals were the predominant oxidative species in studied processes.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2017
·
IF 4.162
Yun Lei,Beibei Chen,Linna You,Man He,Bin Hu
Polydimethylsiloxane (PDMS)/MIL-100(Fe) coated stir bar was prepared by sol gel technique, and good preparation reproducibility was achieved with relative standard deviations (RSDs) ranging from 2.6% to 7.5% (n=7) and 3.6% to 10.8% (n=7) for bar-to-bar and batch-to-batch, respectively. Compared with commercial PDMS coated stir bar (Gerstel) and PEG coated stir bar (Gerstel), the prepared PDMS/MIL-100(Fe) stir bar showed better extraction efficiency for target triazines compounds. It also exhibited relatively fast extraction/desorption kinetics and long lifespan. Based on it, a method of PDMS/MIL-100(Fe) coated stir bar sorptive extraction (SBSE)-high performance liquid chromatography-ultraviolet detector (HPLC-UV) was developed for the determination of six triazines (simazine, atrazine , prometon , ametryn , prometryne and prebane) in environmental water samples. Several parameters affecting SBSE of six target triazines including extraction time, stirring rate, sample pH, ionic strength , desorption solvent and desorption time were investigated. Under the optimal experimental conditions, the limits of detection (LODs, S/N=3) were found to be in the range of 0.021–0.079 μg L −1 . The repeatability RSDs were in the range of 2.3–6.3% (n=7, c=0.5 μg L −1 ) and the enrichment factors (EFs) ranged from 51.1 to 102-fold (theoretical EF was 200-fold). The proposed method was applied to the analysis of target triazines in environmental water samples, with recoveries of 98.0–118% and 94.0–107% for spiked East Lake water and local pond water samples, respectively.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2017
·Vol. 19
·期 7
·1-15
·
IF 2.02
Yi Yunqiang,Wu Juan,Wei Yufen,Fang Zhanqiang,Tsang Eric Pokeung
Some problems exist in the current remediation of polybrominated diphenyl ethers (PBDEs) from aqueous solution by using iron-based nanoparticles. Our efforts have contributed to the synthesis of biochar-supported Ni/Fe bimetallic nanoparticle composites (BC@Ni/Fe). Under the optimum operating parameters of BC@Ni/Fe, the morphologic analysis revealed that biochar effectively solved the agglomeration of Ni/Fe nanoparticles and the removal efficiency of BDE209 obtained by BC@Ni/Fe (91.29%) was seven times higher than the sum of biochar (2.55%) and Ni/Fe (11.22%) in 10 min. The degradation products of BDE209 in the solution and absorbed on the BC@Ni/Fe were analyzed with gas chromatography-mass spectroscopy, which indicated that the degradation of BDE209 was mainly a process of stepwise debromination. Meanwhile, compared with Ni/Fe nanoparticles, the adsorption ability of the by-products of BDE209 by BC@Ni/Fe was greater, to a certain extent, which reduced the additional environmental burden. In addition, the concentration of nickle ion leaching from the Ni/Fe nanoparticles was 3.09 mg/L; conversely, the concentration of nickle leaching from BC@Ni/Fe was not detected. This excellent performance in our study indicates a possible means to enhance the reactivity and reduce the secondary risks of Ni/Fe nanoparticles.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Weisheng Dai,Yao Wang,Weijuan Guo,Guofu Wang,Muqing Qiu
The effects of Fe(II) and humic acid on U(VI) immobilization onto oxidized carbon nanofibers (Ox-CNFs, pyrolysis of bacterial cellulose) were investigated by batch, spectroscopic and modeling techniques, with results suggesting that, Ox-CNFs exhibited fast adsorption rate (adsorption equilibrium within 3 h), high adsorption performance (maximum adsorption capacity of 208.4 mg/g), good recyclability (no notable change after five regenerations) in the presence of Fe(II) towards U(VI) from aqueous solutions (e.g., 40 % reduction and 10 % adsorption at pH 8.0), which was attributed to the various oxygen-containing functional groups, excellent chemical stability, large specific surface area and high redox effect. U(VI) adsorption increased with increasing pH from 2.0 to 5.0, then high-level plateau and remarkable decrease were observed at 5.0–6.0 and at pH > 6.0, respectively. According to FT-IR and XPS analysis, a negative correlation between U(VI) reduction and organic in the presence of Fe(II) implied that U(VI) reduction was driven by Fe(II) while inhibited by humic acid. The interaction mechanism of U(VI) on Ox-CNFs was demonstrated to be adsorption and ion exchange at low pH and reduction at high pH according to XPS and surface complexation modeling. These findings filled the knowledge gaps pertaining to the effect of Fe(II) on the transformation and fate of U(VI) in the actual environment. This carbon material with distinctive performance and unique topology offers a potential platform for actual application in environmental remediation.
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Yujue Wang,Yilin Wang,Xianghao Tang,Lei Zhang,Dan Xiao,Xicui Zhang,Qian Zhao
Mn/Fe-based layered oxides are supposed to be suitable as low-cost cathode materials for sodium ion batteries (SIBs) since they are of high specific capacity and wide availability of Mn and Fe sources in nature. However, these materials generally suffer from complex and irreversible phase transitions. The manufacture of high entropy materials can solve these matters. Herein, we rationally design and synthesized high entropy doped P2-Na 0.62 Ca 0.03 Mn 0.58 Fe 0.23 Cu 0.085 Mg 0.01 Ti 0.015 Li 0.08 O 2 (NFM-HEO) material. As cathode for SIB, it exhibits enhanced long cycling stability and better rate capability compared to the undoped P2-Na 0.65 Mn 0.6 Fe 0.4 O 2 material within 2.0 ∼ 4.3 V. After 500 cycles at 1C, the capacity retention rate reaches 85.4 %, and it can provide a reversible specific capacity of 134 mAh g −1 at 0.1C and 70 mAh g −1 at 5C. In-situ XRD, diffusion kinetics results together with microstructure and phase characterization before and after cycling indicate that high entropy doping enhances structural stability of layered oxides, suppresses irreversible phase transitions, stabilizes Na + diffusion paths, ensures reversible anionic redox reactions, inhibits crack generation after cycling, prevents transition metal dissolution, and improves humid air stability. This study is expected to offer guidance for the improvement of structural stability of layered cathode for SIBs.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2024
·Vol. 16
·期 48
·22273-22282
·
IF 5.8
Feng Li,Kairen Zhao,Yan Jin,Baoxin Li
Currently, water treatment usually requires additional light illumination or oxidants for the degradation of organic pollutants, which increases the costs and is not conducive to practical application. In this study, carbon vacancy-modified Fe–N–C single-atom catalysts (Cv-Fe–N–C SACs) were prepared through one simple acid-etching and pyrolysis process. Interestingly, we found that Cv-Fe–N–C SACs could degrade organic pollutants without any external assistance (such as oxidants or light illumination). The Cv-Fe–N–C SACs could remove over 99% of Rhodamine B (RhB) within 10 min at room temperature. The degradation of organic pollutants with the Cv-Fe–N–C SACs was attributed to their ability to activate dissolved oxygen for producing superoxide (O2˙−). In addition, the catalysts showed high activity over a broad pH range (3–11) and held rather good stability after 5 recycles. This study proved that the Cv-Fe–N–C SACs are highly efficient catalysts for degrading organic pollutants. These catalysts have the potential to make sewage treatment more efficient and less expensive.
✓ 已验证
产品关联
DOI
PubMed
高影响因子