Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 3
·122797
·
IF 7.5
Huanlong Liu,Jie Zhao,Shen Tang,Wanxin Cheng,Yanhong Li,Dunqiu Wang,Jie Zhang
The co-contamination of hexavalent chromium Cr(VI) and chlorpyrifos (CPF) poses a severe challenge to traditional remediation technologies due to synergistic toxicity. This study constructed a bio-material synergistic system (FeO/C@ S. oneidensis MR-1) for their simultaneous removal. Results demonstrated that under optimal conditions (0.08 g/L FeO/C, 10% amount of inoculation, pH 7.0), the removal rates of Cr(VI) and CPF reached 75.5% and 93.7%, respectively, maintaining robust degradation efficiency even under a severe organic shock load of 50 mg/L CPF. Importantly, comprehensive multi-scale characterizations (SEM, CLSM, EDS, XRD, FTIR, XPS, 3D-EEM), revealed a bidirectional bio-material synergy: FeO/C acted as an electron shuttle and play a role of bio-driven electron allocation, preferentially driving the Fe(III)/Fe(II) cycle to detoxify Cr(VI), while dynamically secreted extracellular polymeric substances (EPS) acted as an active interface to enrich CPF ensuring the efficient biomineralization of CPF and complex heavy metals. This dual action effectively alleviated acute oxidative stress, enabling cell viability to recover to 80%. For real-world applications, a clear takeaway is that this self-sustaining system entirely eliminates the need for external chemical electron donors. It offers a scalable, bio-driven electron allocation green engineering strategy for the in-situ bioremediation of complex heavy metal-organic wastewater.
✓ 已验证
DOI
高影响因子
Nanoscale
·
2026
·
IF 5.2
Mengyao Zhao,Hui Zhao,Siyuan Liu,Yijing Wang,Yingxing Yang,Jinhua Lai,Xiaomei Yu,Songjie Li,Jin You Zheng
To address the practical application challenges of slow response speed and inadequate stability in WO3 electrochromic films, this study fabricated such films using the sol-gel method and systematically investigated the effects of key process parameters, including the aging time of peroxotungstic acid (PTA) sol, spin-coating speed, and annealing temperature, on the films' microstructure, crystal structure, and electrochromic performance. The findings demonstrated that 15 h was the optimal aging time for the PTA sol, effectively optimizing the film formation quality. The ideal spin-coating speed was 2000 rpm, enabling precise regulation of the film thickness and performance. Notably, the amorphous WO3 films annealed at 100°C exhibited outstanding comprehensive electrochromic properties, attributed to their unique three-dimensional disordered polygonal ionic channel structure. Specifically, these films achieved an optical modulation amplitude of 64.4%, a bleaching response time of 1.2 s, a coloring response time of 3.1 s, a coloration efficiency of 42.5 cm2 C-1 , and favorable cyclic stability. In contrast, crystalline WO3 films formed via high-temperature annealing suffer from ion-trapping effects, leading to incomplete bleaching. This work offers effective strategies and a theoretical foundation for the design and preparation of high-performance WO3-based electrochromic films from the dual perspectives of process regulation and structural mechanisms.
✓ 已验证
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Jiyuan Zhang,Yifan Yang,Zhengtong Zhu,Rui Cao,Mengchao Feng,Qiang Li,Guojun Ji,Jianbin Zhang
A g-C 3 N 4 @(H/C-CdS) photocatalyst via a microinjection titration-stirring strategy. • g-C 3 N 4 suppressed H/C-CdS nanoparticle agglomeration enhancing active site exposure. • CS 2 SM-modified CdS crystallization improved charge transfer and defect regulation. • To achieve 78.37 % TC degradation in 60 min under sunlight. The development of efficient photocatalysts for visible-light and solar-driven degradation of wastewater treatment containing antibiotics remains a significant challenge. Here, this work reports a novel g-C 3 N 4 @(H/C-CdS) catalyst synthesized via a facile microinjection titration-stirring strategy based on a dual-interface design. Through comprehensive morphological and structural characterization, the catalyst demonstrated optimized two-dimensional layered structures, enlarged specific surface areas, and narrower band gaps, which were essential for its superior photocatalytic activity. The system simultaneously established a semiconductor heterojunction between g-C 3 N 4 and CdS as well as a Z-scheme interphase junction between hexagonal and cubic CdS, effectively facilitating charge separation and transfer. Notably, the incorporation of CS 2 -storage material (CS 2 SM) as a crystallization modifier precisely controlled CdS crystal phases and defect states. Benefiting from these structural and electronic properties, the composite achieved efficient cycling stability and remarkable photocatalytic degradation efficiency for 150 mg/L tetracycline, achieving degradation rates of 76.08% under visible light and 78.37% under natural sunlight within 60 min. This work provides detailed insights and a solid foundation for designing advanced dual-interface photocatalysts for solar-driven wastewater treatment. Download: Download high-res image (270KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Xiaodong Cao,Mingli Liu,Yifei Pan,Qiuran Wang,Jinying Gong,Yongkang Ye,Yuhan Sun,Zhaojun Wei
Sensitive and simultaneous detection of multiple foodborne pathogens has become an urgent need in the food industry. This work presents a signal-on fluorescence biosensor using DNA-templated metal nanoclusters as signal nanotags and an Exonuclease III (Exo III)-assisted target-recycling (EATR) strategy for the detection of Cronobacter sakazakii ( C. sakazakii ) and Salmonella typhimurium ( S. typhimurium ). The detection system consists of carboxylated polypyrrole nanoparticles functionalized with hairpin DNA sequences HP1 and HP2 (HP1-cPPy-HP2 NPs), the target ompA gene (tDNA1) of C. sakazakii and invA gene (tDNA2) of S. typhimurium , DNA-templated gold and silver nanocluster nanotags (sDNA1-AuNCs and sDNA2-AgNCs), and Exo III. In the presence of the targets, HP1 and HP2 on cPPy surface are opened through hybridization, forming tDNA1-HP1-cPPy-HP2-tDNA2 complex. These opened HP1 and HP2 then hybridize with their respective sDNA1 (sDNA1-AuNCs) and sDNA2 (sDNA2-AgNCs), leading to the increased fluorescence intensity of both AuNCs and AgNCs in the detection system. Furthermore, with EATR amplification strategy, the targets can be released from the complex through cleavage by Exo III and proceed to the next cycle of HP1/HP2 opening. As a result, the fluorescence signals of AuNCs and AgNCs can be significantly increased. Under optimal conditions, the fluorescence biosensor shows wide linear ranges for C. sakazakii (1.64 ∼ 1.64×10 5 CFU mL −1 ) and S. typhimurium (2.56 ∼ 2.56×10 5 CFU mL −1 ), with LODs of 1.4 CFU mL −1 and 2.2 CFU mL −1 , respectively. The biosensor was used for the detection of C. sakazakii and S. typhimurium in real samples, with recovery ranges of 88.8% to 110.6% and 90.4% to 114.4%, respectively.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2026
·Vol. 156
·期 9
·261
·
IF 2.5
Su Qiqi,Dai Wanrong,Liu Meijun,Cheng Mengyu,Dai Chunyan,Li Yafei
The rational design of non-noble metal catalysts relies on a deep understanding of the structure-performance relationship. Herein, we investigate the influence of pyrolysis temperature (800–1100 °C) on Co–N/C catalysts derived from ZnCo-ZIF for the aerobic oxidation of 5‑hydroxymethylfurfural (HMF) to 2,5‑furandicarboxylic acid (FDCA). A volcano‑shaped dependence of FDCA yield on pyrolysis temperature is observed, with the catalyst pyrolyzed at 1000 °C (Co–N/C-1000) delivering complete HMF conversion and 98.0% FDCA yield within 4 h under optimized conditions (110 °C, 2 MPa O 2 ). Multi-technique characterization reveals a temperature-driven evolution of Co species: from atomically dispersed Co–N x sites at 800–900 °C, to a bimodal configuration comprising abundant Co–N x together with a small amount of metallic Co 0 nanoparticles at 1000 °C, and finally to large Co aggregates at 1100 °C. The optimal catalytic performance at 1000 °C is thus attributed to this unique coexistence. Kinetic analysis confirms the consecutive pathway HMF → HMFCA → FFCA → FDCA with FFCA→FDCA as the rate‑determining step. Notably, the optimal catalyst maintains 96.8% FDCA yield under industrially relevant 5 wt% HMF concentration. This work provides insights into the structure-performance relationship of Co–N/C catalysts and a rational strategy for designing efficient non-noble metal catalysts for biomass conversion. Graphical
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·Vol. 65
·期 29
·15459-15472
·
IF 3.9
Li Xiaolong,Zhang Yahui,Sun Gangqun,Sun Manni,Wang Xiru,Yang Zhiyan,Zhao Zhuoya,Li Mengjie,Ma Yongning,Huang Wei,Zhu Junli,Yang Yuhao
The
development of high-performance catalysts enabling CO-free
hydrogen production via aqueous-phase reforming of methanol (APRM)
is crucial for integrated methanol-to-hydrogen and hydrogen fuel cell
systems. Herein, a tandem Pt/Fe 5 C 2 :Fe 3 N@C catalyst was prepared via a temperature-programmed carbonization-nitridation
method followed by photoreduction deposition. Remarkably, the catalyst
delivers efficient CO-free H 2 production even at temperatures
as high as 210 ° C. The catalyst features a strong metal–support
interaction between Pt and Fe 5 C 2 , and a weaker
interaction between Pt and Fe 3 N. Mechanistic investigations
decouple the functions of the individual components. The carbon support
primarily serves to disperse the active components. The Pt–Fe
interface provides the active sites for methanol decomposition (CH 3 OH → CO + 2H 2 ). The resulting CO is completely
consumed through two subsequent reactions: most undergoes the water–gas
shift reaction (CO + H 2 O → CO 2 + H 2 ) on the surfaces of Fe 3 N and Fe 5 C 2 , with Fe 3 N being the dominant active phase, while
the remaining trace CO undergoes methanation (CO + 3H 2 →
CH 4 + H 2 O), for which Fe 5 C 2 is the principal active site. This synergistic cascade of reactions
enables the Pt/Fe 5 C 2 :Fe 3 N@C catalyst
to achieve highly efficient CO-free hydrogen production from APRM.
This work offers insights into designing catalysts for CO-free hydrogen
generation from alcohol-based liquid organic hydrogen carriers and
may accelerate the integrated industrialization of the methanol-to-hydrogen
and hydrogen fuel cell technology.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2025
·
IF 2.6
Zhao Chenhao,Fan Jianming,Hu Zhibiao,Tu Fengzhang
Nickel selenides’ structural and composition diversity offers promising avenues for advanced battery anodes, yet their practical implementation faces persistent challenges of structural instability and sluggish kinetics. Addressing these limitations, We developed a spatially confined architecture using a template-directed hydrothermal method. This approach readily produced uniform Ni 3 Se 4 nanoparticles (size ~ 110 nm) encapsulated within conductive carbon nanoplates. Time-dependent XRD analysis confirms continuous selenization-driven phase evolution, while XPS/TGA verify the composite (26.8 wt% carbon) comprises Ni 2+ , Se 2 2− , and Se 2− species. This dual-role design—where carbon simultaneously serves as electron highway and volume-change buffer—enables breakthrough lithium storage performance: 586.2 mAh g −1 after 100 cycles (0.2 A g −1 ) with exceptional 375.5 mAh g −1 retention at ultrahigh 5 A g −1 . Electrochemical analysis demonstrates carbon spacers reduce charge-transfer resistance by > 40% versus bare counterparts. The strategically engineered interface provides critical insights for stabilizing conversion-type anodes. This is significant because, although the sodium storage performance remains challenging (167.9 mAh g −1 after 100 cycles), our study reveals fundamental differences when nickel selenide/carbon composites are employed as its anode materials.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2025
·
IF 6.2
Feihong Li,Lei Zheng,Zhanjun Liu,Mingyu Zhang,Qizhong Huang
This work delves into the fascinating transformation from organic precursors to dense SiC-modified (Ti, Zr, Hf)C solid solution ceramics. Nanocrystalline powder was crafted through an innovative sol-gel process coupled with carbothermal reduction, followed by spark plasma sintering (SPS) to obtain the multi-phase ceramics. The results indicate that the addition of silicone alkoxide is required for forming a robust multi-phase gel network, which facilitates the formation of oxide intermediates (e.g., ZrSiO 4 , HfSiO 4 ), accelerates phase transformation, and inhibits grain from coarsening by encapsulating Ti/Zr/Hf compounds while reinforcing grain boundaries. After pyrolysis at 1400 °C, the precursors gradually evolved into a highly crystalline, medium-entropy solid solution. The optimal sintered composite achieves a relative density of 97.8 % and an open porosity of 0.4 %. The mechanical properties were improved by induced lattice distortion and effect of fine-grained strengthening with the incorporation of SiC. Nanoindentation tests reveal that the hardness and elastic modulus of the (Ti, Zr, Hf)C-SiC composite reach 22.39 GPa and 342.78 GPa, respectively.
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2018
·
IF 13.12
Hui Liu,Beihong Liu,Hong Guo,Mengfang Liang,Yuhao Zhang,Timur Borjigin,Xiaofei Yang,Lin Wang,Xueliang Sun
To meet the pressing needs of fast development of energy and environmental science, sodium ion batteries (SIBs) are considered as the promising novel generation of power storage system, due to abundant reserves and low price of sodium sources. In this work, N-doped C-encapsulated scale-like yolk-shell structured MoSe 2 -C materials assembled by expanded (002) planes few-layer MoSe 2 nanosheets are successfully synthesized by a facile general strategy. The few-layer crystal fringes are no more than 4 layers. Notably, the interlayer spacing of (002) planes is expanded to 1.15 nm, which is larger than its intrinsic value of pristine MoSe 2 (0.64 nm). Particularly, the few-layer nanosheets with expanded (002) planes are spaced-restricted growing in the inner wall and the surface of hollow carbon frame and form scale-like yolk-shell hybrid MoSe 2 -C structure. When evaluated as anode for SIBs, the MoSe 2 -C materials show ultra-long cycling life, maintaining 378 mA h g −1 over 1000 cycles at 3 A g −1 . It also exhibits outstanding rate capability and the Coulombic efficiencies for all the rate performance reaching more than 98.3% except the first one. The expanded (002) planes, 2D fewer-layer nanosheets and unique N-doped C-encapsulated scale-like yolk-shell frame are responsible for the enhanced electrochemical performance.
✓ 已验证
DOI
高影响因子
Journal of Cleaner Production
·
2024
·
IF 9.7
Ziyuan Li,Yangjun Wang,Huan Wang,Shuai Zhang,Zhen Shang,Limei Tian,Yuying Yan
Utilizing salt-based shape-stabilized phase change materials (ss-PCMs) for high-temperature thermal energy storage stands as a pivotal avenue in realizing carbon neutrality . However, the performance of ss-PCMs significantly deteriorates after thermal cycling. This study utilizes rice husk carbon (RHC) with an in-situ SiO 2 –C interconnected structure as the encapsulating material, along with expanded graphite (EG) and MgO , to encapsulate ternary chloride (TC). In this approach, RHC simultaneously acts as a thermal conductivity materials (TCM) and a ceramic supporting material (CCM). The results showed that this encapsulation method can effectively encapsulate up to 65% of TC. The 60 wt% TC-10 wt% RHC-10 wt% EG-20 wt% MgO sample named 60T/10R/10E/20M is considered a close to optimal formulation in terms of thermal conductivity and phase change enthalpy . This ss-PCM has a thermal conductivity of 8.86 W m−1 K−1, and phase change enthalpy of 153.6 J g−1. The ss-PCMs maintained shape stability even after 1000 cycles, with minimal mass loss and thermal conductivity degradation compared to the non-RHC-added ss-PCM. This study has prepared high performance and reliability thermal storage materials through a green and low-cost approach.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 125
·102993-102999
·
IF 3.84
Luyu Yang,Wei Liu,Huanlei Wang,Shuang Liu,Jifei Wang,Jiaxin Chen
A hierarchical pore structure is believed to be an excellent architecture for metal oxide anode materials of lithium-ion batteries (LIBs). However, the difficulty and complication in synthesis limit their further application. In this work, a novel Fe3O4/C composite with a hierarchical pore carbon (HPC) network has been synthesized simply by one-step pyrolysis synthesis using ferrous gluconate as the precursor. This hierarchical porous framework derived from a loose assembly of the intersecting porous carbon rods presents a wide range of pore sizes and a rather large surface area (>226 cm2 g−1). Embedded with well-crystalline Fe3O4 particles, the resulting Fe3O4@HPC composite exhibits a high capacity of 1112 mA h g−1 at the end of the 100th cycle and an enhanced rate performance of above 600 mA h g−1 at a high current density of 2000 mA g−1. This might derive from the unique hierarchical pore system with a high overall porosity, which can not only facilitate the electrolyte diffusion but also alleviate severe volume variation efficiently in lithium ion insertion/extraction. More importantly, this provides us with a successful example to fabricate advanced anode materials simply by one-step pyrolysis of cheap organic–inorganic hybrids at low-cost.
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2015
·
IF 4.504
Yan Li,Defa Huang,Wenjiang Shen
Supercapacitors based on MnO 2 /CB/C nanocomposites films are prepared by direct electrophoretic deposition (EPD) process on nickel plates in an aqueous solution containing of MnO 2 nanoparticles , carbon black (CB) and sodium alginate (SA), followed by carbonization of SA to carbon layer . The nanocomposites of MnO 2 /CB/C films are prepared from different electrolytic solutions with mass ratios of MnO 2 nanoparticles, CB and SA from 8: 1: 1 to 6: 2: 2. Same mass ratios of nanocomposites are prepared by traditional Doctoral Blade (DB) process for morphologies and performances comparisons, in which mixtures of MnO 2 nanoparticles, carbon black with polyvinylidene fluoride (PVDF) are used. From scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) images, the MnO 2 /CB/C shows a uniform aggregation of MnO 2 and carbon nanoparticles covered with carbon layers. In the case of the MnO 2 /CB/PVDF from DB process, the MnO 2 nanoparticles are separately clustered, and the clusters are adhered to CB together with PVDF. More uniform film and better contact of MnO 2 with CB by carbon layer can be obtained from EPD/Carbonization process. The electrochemical performances of MnO 2 /CB/C and MnO 2 /CB/PVDF nanocomposites in different mass ratios are compared by areal specific capacitances (C a ), charge transfer resistance of films and retention of capacitance after 1500 cycles of charge/discharge to test stability respectively. The nanocomposites of MnO 2 /CB/C show better areal specific capacitances and smaller charge transfer resistances at each ratio. The carbon layer coating on surface of MnO 2 nanoparticles can effectively delay the capacitance loss, which leads to 98% of capacitance after charge/discharge cycles, much better than retention of those from DB process (50%). The EPD/Carbonization is an easy way to make carbon layer on pseudo capacitive materials from sodium alginates , and the carbon layer can effectively improve the charge/discharge stability of supercapacitors.
✓ 已验证
DOI
高影响因子