CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Chao Wang,Baokang Dang,Hanwei Wang,Yipeng Chen,Yushan Yang,Yingying Li,Ye Xiong
The assembly of heterogeneous photocatalysts with unique structures by 2D heterojunctions is an advanced strategy for efficient solar energy conversion. However, heterogeneous photocatalysts constructed from 2D materials will suffer from high photogenerated charge recombination and low light absorption due to the arbitrary stacking and weak bonding of lamellae. Here, flower-like Bi 4 O 5 I 2 / β -Bi 2 O 3 (FL-Bi 4 O 5 I 2 / β -Bi 2 O 3 ) heterojunctions are developed in situ using FL-δ-Bi 2 O 3 as the starting material. It is noteworthy that the basic compositional form of the material was well maintained throughout the synthesis. Besides, due to the random reaction of iodide ions with the exposed surface of δ-Bi 2 O 3 , multiple heterogeneous regions are displayed on the basic lamellar units constituting the Bi 4 O 5 I 2 /β-Bi 2 O 3 nanoflowers. Theoretical and experimental results reveal that FL-Bi 4 O 5 I 2 /δ-Bi 2 O 3 possesses not only improved photogenerated carrier separation, enhanced light harvesting, but also considerable CO 2 adsorption. Importantly, FL-Bi 4 O 5 I 2 / β -Bi 2 O 3 achieves S-scheme CO 2 conversion due to its reasonable energy band structure, and with the CO generation rate of up to 31.74 μmol g −1 h −1 under simulated sunlight.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2023
·
IF 16.5
Pengye Zhang,Wenjin Dong,Yuanyuan Zhang,Li-Nan Zhao,Hualei Yuan,Chuanjun Wang,Wenshuo Wang,Hanxiao Wang,Hongyu Zhang,Jian Liu
Photoenzyme-coupled catalysis, featuring the integration of photocatalysis with enzymes, is very promising for next-generation green biomanufacturing. The presence of an Rh complex is a prerequisite for the efficient photocatalytic regeneration of the reduced form of nicotinamide adenine dinucleotide (NADH), which poses the issue of immobilizing homogeneous complexes. In this study, a novel immobilization method based on the thermal polymerization of 2,2 ‘ -bipyridine-5,5 ‘ -diamine (DABP) onto a polymeric carbon nitride (PCN) framework is proposed. PCNbpy 4 is metalated by immobilizing Rh on the terminal bipyridine structure. Notably, partial DABP has the ability to undergo high-temperature thermal polymerization, resulting in the formation of N-doped graphene. This N-doped graphene can be grafted onto the terminal amino group, forming a potential electron transfer pathway. Additionally, N-doped graphene, because of its good electrical conductivity, guides the photogenerated electrons toward the anchored Rh sites. The catalyst achieves exclusive regeneration of 1,4-NADH with only a 0.12% Rh atomic ratio and realizes 80% NADH regeneration in 20 min. The competitive relationship between hydrogen production and NADH regeneration is also elucidated. Combined with formate dehydrogenase immobilized on a hydrophobic membrane, CO 2 reduction to formate is accomplished efficiently, and the formate concentration can accumulate to 7 mmol L −1 within 48 h.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2023
·
IF 17.1
Chan Guo,Yunxiang Tang,Zhengyi Yang,Tingting Zhao,Jiurong Liu,Yufei Zhao,Fenglong Wang
Carbon dioxide (CO2) hydrogenation to methane (CH4) is regarded as a promising approach for CO2 utilization, whereas achieving desirable conversion efficiency under mild conditions remains a significant challenge. Herein, we have identified ultrasmall Ru nanoparticles (∼2.5 nm) anchored on MnCo2O4 nanosheets as prospective photothermal catalysts for CO2 methanation at ambient pressure with light irradiation. Our findings revealed that MnCo2O4 nanosheets exhibit dual functionality as photothermal substrates for localized temperature enhancement and photocatalysts for electron donation. As such, the optimized Ru/MnCo2O4-2 gave a high CH4 production rate of 66.3 mmol gcat–1 h–1 (corresponding to 5.1 mol gRu–1 h–1) with 96% CH4 selectivity at 230 °C under ambient pressure and light irradiation (420–780 nm, 1.25 W cm–2), outperforming most reported plasmonic metal-based catalysts. The mechanisms behind the intriguing photothermal catalytic performance improvement were substantiated through a comprehensive investigation involving experimental characterizations, numerical simulations and density functional theory (DFT) calculations, which unveiled the synergistic effects of enhanced charge separation efficiency, improved reaction kinetics, facilitated reactant adsorption/activation and accelerated intermediate conversion under light irradiation over Ru/MnCo2O4. A comparison study showed that, with identical external input energy during the reaction, Ru/MnCo2O4-2 had a much higher catalytic efficiency compared to Ru/TiO2 and Ru/Al2O3. This study underscores the pivotal role played by photothermal supports and is believed to engender a heightened interest in plasmonic metal nanoparticles anchored on photothermal substrates for CO2 methanation under mild conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of CO2 Utilization
·
2022
·
IF 8.321
Xiaofeng Zhang,Junhong Wang,Yunpeng Bian,Huijuan Lv,Bo Qiu,Yuanyuan Zhang,Ruiyuan Qin,Dandan Zhu,Sheng Zhang,Dajian Li,Shimin Wang,Wenpeng Mai,Yue Li,Tao Li
Conversion of carbon dioxide to cyclic carbonates and other value-added commercial products is a promising strategy for the modern chemical industry and removing CO 2 from the atmosphere. Catalysis with high-efficient is critical to the successful conversion of CO 2 into cyclic carbonates. Porous organic polymers (POPs) with integrated metalloporphyrin structures are known as typical efficient catalysts for the cycloaddition of CO 2 reaction. However, the high cost and energy consumption in synthesizing polymer still prohibit the application of CO 2 conversion. Here, we have prepared porphyrin-based conjugated microporous polymer (Co-Por-POPs) microspheres by a simple self-polymerization strategy, which exhibit high catalytic performances in the CO 2 cycloaddition reactions with free solvent under atmospheric pressure at room temperature. Even using dilute CO 2 (15% CO 2 in N 2 ), a TOF up to 8.1 h −1 could be afforded under ambient conditions (25 °C, 1 bar) by Co-Por-POP-2. This study highlights the potential for sustainable industrial syntheses of cyclic carbonates.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2023
·Vol. 12
·期 2
·923-931
·
IF 11.9
Xiaoyue Zhang,Chaoran Dong,Yong Yang,Yingjie Hu,Lizhi Wu,Yu Gu,Kan Zhang,Jinyou Shen
It is of significance to convert CO2 into value-added carbon compounds under solar light. Here, we report a WTe2 photothermal catalyst for the highly selective conversion of CO2 into a commercially valuable chemical, ethylene (C2H4), by using the dual sites of W and Te under light illumination. It is found that (1) WTe2 offers favorable formation of a *CHO intermediate at the W site, a lower energy barrier for the transfer of the *CHO intermediate from the W to the Te site, and a suitable W–Te distance for the C–C coupling to produce C2H4; (2) the photocatalysis and thermocatalysis synergistically cooperate with each other on WTe2, significantly facilitating the CO2 conversion. As a result, by designing a WTe2 nanostructure with an enhanced photothermal effect, the reaction temperature can reach 185 °C under a 300 W Xe lamp, enabling a C2H4 production rate of 115.51 μmol g−1 with a selectivity of C2H4 up to 88%, which exceeds all reported values of solar-driven C2H4 production.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Tianwei Wang,Quan Zhang,Kang Lian,Gaocan Qi,Qian Liu,Ligang Feng,Guangzhi Hu,Jun Luo,Xijun Liu
Metal-organic frameworks (MOF) derived carbon materials are considered to be excellent conductive mass transfer substrates, and the large specific surface area provides a favorable platform for loading metal nanoparticles . Tuning the coordination of metals through polyacid doping to change the MOF structure and specific surface area is an advanced strategy for designing catalysts. Modification of Fe-doped ZIF-8 pre-curing by pyrolysis of phosphomolybdic acid hydrate (PMo), Fe nanoparticles confined by Mo and N co-doped carbon frameworks (Fe-NP/MNCF) were fabricated, and the impact of PMo doping on the shape and functionality of the catalysts was investigated. The Zn-air battery (ZAB) driven CO 2 electrolysis was realized by using Fe-NP/MNCF, which was used as bifunctional oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO 2 RR) catalysts. The results show that the half-wave potential (E 1/2 ) of Fe-NP/MNCF is 0.89 V, and the limiting diffused current density ( j L ) is 6.4 mA cm −2 . The ZAB constructed by Fe-NP/MNCF shows a high specific capacity of 794.8 mAh g Zn −1 , a high open-circuit voltage (OCV) of 1.475 V, and a high power density of 111.6 mW cm −2 . Fe-NP/MNCF exhibited efficient CO 2 RR performance with high CO Faraday efficiency (FE CO ) of 87.5 % and current density for the generation of carbon dioxide ( j CO ) of 10 mA cm −2 at −0.9 V vs RHE. ZAB-driven CO 2 RR had strong catalytic stability. These findings provide new methods and techniques for the preparation of advanced carbon-based catalysts from MOFs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTENGCOMM
·
2023
·Vol. 25
·期 46
·6489-6495
·
IF 3.1
Yali Ma,Haitang Wang,Hailong Wang,Jiani Wang,Shuaiyu Jiang,Qiang Zheng,Songyan Jia,Xue Li,Tianyi Ma
By utilizing a winding carboxylic acid ligand as the linker and 12-connected Hf6 clusters as the metal node, we successfully construct a novel hafnium-based metal–organic framework [Hf6O4(OH)4(DCPB)6]·(Hf-MOF, 1,3-di(4-carboxyphenyl)benzene (H2DCPB)) with ultra-microporous structure. Benefitting from the strong coordination bond between Hf6 clusters and the carboxylic acid ligand, the synthesized Hf-MOF displays extraordinarily high thermal and chemical stability, in which the Hf-MOF can maintain high crystallinity under both acidic and basic aqueous solutions, and its decomposition temperature is as high as about 400 °C. Moreover, the interpenetrated framework can endow the Hf-MOF with ultra-microporous pores, which can provide multiple adsorption sites and play a role in the size sieving effect of CO2 molecules. Thus, the Hf-MOF displays excellent CO2 adsorption and separation performance, in which the maximum CO2 adsorption amount can reach up to 65.5 cm3 g−1 at 273 K and 1 bar, and the selectivities for CO2/CH4 = 0.5/0.5 and CO2/CH4 = 0.05/0.95 are as high as 6.9 and 6.0 under 1 bar at 298 K, respectively, and surpass many reported water stable MOF materials. The commendable stability and the CO2 adsorption/separation ability are of extreme importance for its practical industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 41
·16033-16045
·
IF 4.5
Tian Yuhao,Li Ting,Cai Weijie
Recently, bio-ethanol reforming with CO 2 (EDR) has been considered as one of the environment-friendly processes to diminish the emission of greenhouse gas, along with increasing the production of value-added syngas. However, designing high-performance catalysts is still a great challenge. In this work, MOF-derived CoMO x (M:Ce,Zr,Zn) catalysts were applied in EDR reaction for the first time to explore the influence of support types on catalytic performance. Characterization of the investigated catalysts by XPS, XRD, H 2 -TPR, Raman, TEM and BET depicted the difference in cobalt dispersion, specific surface area as well as Co-support interaction. Indeed, H 2 -TPR and XPS results revealed stronger Co-Ce interaction and the smaller particle size of Co 3 O 4 in Co-CeO 2 catalyst which contributed to higher activity. Indeed, 100% of ethanol conversion was obtained at 550 °C and the formed H 2 /CO ratio (1.18) was suitable for the downstream Fischer–Tropsch process. Meanwhile, no remarkable decline of ethanol conversion and product distributions occurred after 40 h stability tests. The findings implied that EDR process might be suitable to consume greenhouse gas and reduce carbon footprint. Characterization results of the used catalysts indicated that Co-CeO 2 catalyst presented an outstanding anti-aggregation and anti-coking property. Herein, the effect of support type in this work might provide guidance for the design of high-performance catalysts for other heterogeneous reactions operated at high temperature. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Luwei Peng,Wenshuang Lou,Lulu Li,Yang Zhang,Xi Luo,Nengneng Xu,Jinli Qiao
CO 2 , as one of the greenhouse gases, actually represents a cheap and abundant C1 fuel to produce fuels and chemical stocks. Herein, inspired by photocatalysis and electrocatalysis, we have successfully synthesized a series of copper and bismuth oxides with heterostructure by a first co-electrodeposition method and then by thermal treatment at different temperatures. The bimetallic oxide (Cu 2 O/β-Bi 2 O 3 ) at 300 °C with the main exposure of β-Bi 2 O 3 (2 0 1) planes shows the beautiful micro-flower morphology with numerous petals in thickness around 20 ∼ 40 nm. Therefore, the Cu 2 O/β-Bi 2 O 3 heterostructure with active edge sites can electrochemically convert CO 2 into formate with a promising Faradaic efficiency (96.3 %) and current density (40.4 mA cm −2 ) at − 0.97 V vs. RHE. Specifically, the current density of Cu 2 O/β-Bi 2 O 3 bimetallic catalyst can be largely enhanced to 48.5 mA cm −2 at − 0.92 V vs. RHE with the assistance of light compared to the 30.1 mA cm −2 without light. The production rate of formate with the assistance of light can also be increased to 705.1 μmol h −1 cm −2 , superior to that of 536.4 μmol h −1 cm −2 without light. Such an excellent photo-assisted electrochemical CO 2 reduction performance is due to the fast charge-transfer process between Cu 2 O and β-Bi 2 O 3 . This study may provide a new route to directly synthesize the photoactive electrocatalysts with more edge sites and heterojunction for promoting electrochemical CO 2 reduction performance with the assistance of light field.
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULAR RAPID COMMUNICATIONS
·
2023
·Vol. 44
·期 24
·2300477
·
IF 4.6
Yuan Liu,Binghui Xue,Jiadong Chen,Yuyan Lai,Panchao Yin
The emergence of polymers with intrinsic microporosity provides solutions for flexible gas separation membranes with both high gas permeability and selectivity. However, their applications are significantly hindered by the costly synthetic efforts, limited availability of chemical systems, and narrow window of microporosity sizes. Herein, flexible mixed matrix membranes with tunable intrinsic microporosity can be facilely fabricated from the coordination assembly of polymer brushes and coordination nanocages. Polymer brushes bearing isophthalic acid side groups can coordinate with Cu 2+ to assemble into polymer networks crosslinked by 2 nm nanocages. The semi-flexible feature of the polymer brush and the high crosslinking density of the network prevent the network from collapsing during solvent removal and the obtained aerogels demonstrate hierarchical structure with dual porosity from the crosslinked polymer network and coordination nanocage, respectively. The porosity can be facilely tuned via the amount of Cu 2+ by regulating the network crosslinking density and nanocage loadings, and finally, optimized gas separation that surpasses Robeson upper bound for H 2 /CO 2 can be achieved. The coordination-driven assembly protocol paves a new avenue for the cost-effective synthesis of polymers with intrinsic microporosity and the fabrication of flexible gas separation membranes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENERGY & FUELS
·
2023
·
IF 5.3
Cunshi Wang,Qiuzi Zhu,Zhimin Gao,Jianzhong Zhu,Liang Chen,Jianlong Liu,Wangjun Bai
The chemical absorption of CO2 using amine aqueous solutions is the most well-established and efficient approach to CCUS technology. However, these solutions can corrode carbon steel infrastructure, impacting production safety and cost-effectiveness. This study identifies a high CO2 loading (1.2561 mol mol–1) ternary system of 1,4-butanediamine (BDA), ethylene glycol (EG), and 70 wt % H2O (BE70H). The corrosion behavior and mechanism of BE70H on 20# carbon steel (20CS) were studied by weight loss test, ICP-OES analysis, electrochemical experiment, and various characterization techniques, with 30 wt % MEA solution was selected as a reference. The results show that the CO2-loaded amine solution is more corrosive to 20CS than the fresh solution. Fresh and CO2-saturated BE70H solutions (BE70HS) exhibited lower corrosion rates and lower iron concentrations. The characterization results showed that the surface of 20CS corroded by BE70HS formed a dense siderite (FeCO3) film. This film is believed to provide better corrosion inhibition than the chukanovite (Fe2CO3(OH)2) film formed in MEA-saturated solutions. The quantum chemical parameters, such as EHOMO, ELUMO, and ΔE, indicate that BDA molecules exhibit stronger adsorption on the surface of 20CS compared to MEA, effectively inhibiting the penetration of corrosive agents. The FeCO3 film and the adsorbed BDA layer on the 20CS surface are considered the major and minor pathways of corrosion inhibition, respectively. Furthermore, the phase separation behavior of the BE70H solution can potentially lead to differences in corrosiveness, making it a critical factor to consider in equipment anticorrosion design.
✓ 已验证
产品关联
DOI
高影响因子
SOLID STATE IONICS
·
2023
·
IF 3.2
Jinghe Bai,Defeng Zhou,Leilei Niu,Ruyi Chen,Xiaofei Zhu,Ning Wang,Qingwen Liang,Wenfu Yan
The development of cathode materials with high oxygen reduction reaction (ORR) activity and stability in intermediate temperature (IT) environments is a key factor in the commercialization of solid oxide fuel cells (SOFC). In this paper, the ORR activity of the cathode is improved by doping high-valent Sc 3+ ions at the B-site of the Sr 0.5 La 0.5 Co 0.8 Cu 0.2-x Sc x O 3–δ (x = 0, 0.02, 0.04), in which Sr 0.5 La 0.5 Co 0.8 Cu 0.18 Sc 0.02 O 3–δ (SLCCS2) shows the best electrochemical performance , and the area-specific resistance of SLCCS2 at 700 °C is only 0.047 Ω cm 2 , much lower than the 0.087 Ω cm 2 of Sr 0.5 La 0.5 Co 0.8 Cu 0.2 O 3–δ (SLCC), and the peak power density of SLCCS2 reached 1.098 W cm −2 , which is 1.84 times that of SLCC (0.598 W cm −2 ). In addition, SLCCS2 effectively reduces the thermal expansion coefficient , improves thermal matching with traditional electrolytes, and overcomes the problem of insufficient long-term SOFC stability caused by the high thermal expansion coefficient of Co-based perovskite to a certain extent. SLCCS2 also exhibits excellent CO 2 tolerance. Considering comprehensively, SLCCS2 is expected to become an IT-SOFC cathode material with development potential.
✓ 已验证
产品关联
DOI
高影响因子