Advanced Healthcare Materials
·
2026
·
IF 11
Xiaoyang Ding,Zhiqiang Song,Jing Li,Mingjin Zhang,Liang Lyu,Yi Yu,Jiayi Liu,Qirui Wang,Chenyi Xiong,Baodong Hao,Ting Zhang,Tingting Yu,Xing Wang,Dawei Liu
The repair of diabetic bone defects remains challenging due to disrupted bone immune homeostasis and increased susceptibility to infection. Under hyperglycemic conditions, the immune microenvironment fails to switch between the pro-inflammatory environment required for pathogen clearance and the anti-inflammatory environment for osteogenesis. Here, a glucose-responsive hydrogel (PEG-ZnO-sita) is developed by integrating zinc oxide (ZnO) and sitagliptin into a network formed by dopamine-modified tetra-armed poly(ethylene glycol) succinimidyl glutarate (DA-PEG-SG) and phenylboronic acid-modified gelatin (PBA-Gel). PEG-ZnO-sita, enabled by amidation, phenylboronic ester bonds, and metal-catechol coordination, confers rapid gelation, injectability, mechanical stability, self-healing, and robust tissue adhesion, adapting to the local complexity at the bone defect. In a diabetic microenvironment, the rapid breakage of boronate ester bonds triggers the early burst release of Zn 2+ to inhibit infection by promoting M1 polarization, along with sitagliptin-intervening glucose regulation. Whereafter, the sustained Zn 2+ and sitagliptin release induce M2 polarization and facilitate osteogenic differentiation, demonstrating a self-adaptive strategy in response to inflammatory environments. Both in vitro and in vivo studies confirm that PEG-ZnO-sita effectively promotes bone regeneration by local hyperglycemic microenvironment modulation and sequential regulation of macrophage polarization. So, this temporal immunoregulation of hyperglycemia-immune-osteogenic cascade presents a promising strategy for diabetic infected bone defects.
✓ 已验证
产品关联
DOI
高影响因子
BIOMACROMOLECULES
·
2026
·Vol. 27
·期 8
·5581-5602
·
IF 5.9
Shahid Muhammad,Niaz Mujahid,Ghazal Huma,Naz Tehmina,Munawar Noshaba,Zhong Zhihao,Chen Shihai,Zhang Ping,Guo Lianhong,Zhu Jie
Hydrogel dressings have emerged as versatile platforms
for wound
management. However, effective treatment remains challenging due to
complex wound environments involving hemorrhage, bacterial infection,
and inflammation. Herei, a multifunctional pH-responsive hydrogel
(PCOB 1) was developed via multinetwork cross-linking and freeze–thaw
cycles using oxidized pullulan (OP), collagen, poly(vinyl alcohol)
(PVA), and borax, and was impregnated with in situ stabilized silver nanoparticles (AgNPs). The incorporation of AgNPs
endowed the hydrogel with pH-triggered antibacterial activity, achieving
>99% killing of E. coli and S. aureus , efficient biofilm disruption, >90%
ROS/RNS
scavenging, and catalase-mimetic activity. The hydrogel demonstrated
rapid gelation, self-healing, and hemostasis within 33.3 s. The hydrogel
promoted macrophage polarization from M1 to M2, enhanced collagen
deposition, re-epithelialization, and granulation tissue formation,
achieving 98.5 ± 0.6% wound closure by day 14 in vivo . This study presents a multifunctional hydrogel with antibacterial,
antioxidant, and anti-inflammatory properties for accelerated wound
healing.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Mengyao Chen,Tianqi Zheng,Hangqing Xue,Yeqiang Lu,Congjie Gao,Lixin Xue
Cross-substrate counter diffusion (CSCD) between imidazole and Zn(II)-loaded polyamide (PA) layers is carried out to in-situ grow zeolitic imidazole framework-leaf (ZIF-L) particles and improve the nanofiltration (NF) performances of negatively charged NF membranes. To achieve uniform distribution of Zn(II) in the formed PA layer, Cyclen was used to complex Zn(II) precursors during the interface polymerization (IP) between piperazine (PIP) and trimesoyl chloride (TMC) to dissolve the Zn(II)/PIP precipitation in the aqueous phase. Results showed that the addition of Cyclen improved the uniform dispersion and firm combination of ZIF-L particles (PTs) in the PA layers, improving both the water permeance and salt rejection of the formed TFN NF membranes. Under optimal conditions, TFN-PC 0.10-0.15 /ZIF membrane achieves a Na 2 SO 4 rejection of 90.2-96.8%, a pure water permeance of 25.8-32.8 L·m -2 ·h -1 ·bar -1 , a NaCl/Na 2 SO 4 mixed salt separation factor of 9.0-29.8, and good anti-fouling and operational stability.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Fungi
·
2026
·Vol. 12
·期 8
·601
·
IF 4.3
Chang Liu,Xiaoxue Zhao,Heng Zhao,Jun Zuo,Ruihan Wang,Mengshi Wang,Tianqi Wang,Jingyu Huang,Bin Du,Kui Niu
Plant pathogenic fungi pose a major threat to global crop production and food security, necessitating the development of sustainable control agents. This study investigated the antifungal potential ofPseudophaeolus soloniensis, a wood-decaying fungus. A wild strain was isolated from Hebei, China, and identified via morphology and ITS sequencing. A bioactive crude extract (P1) was obtained through optimized solid-state fermentation on A3M medium. Its antimicrobial spectrum was evaluated against major phytopathogenic fungi (e.g.,Fusarium graminearum,Aspergillus flavus) and model bacteria (Staphylococcus aureus,Escherichia coli) using mycelial growth inhibition, Minimum Inhibitory Concentration (MIC), and agar diffusion assays. P1 exhibited strong, selective activity, showing significantly greater inhibition againstS. aureusthanE. coliand pronounced effects againstF. graminearum(43.79% inhibition at 20 µg/mL) andA. flavus(73.5% at 0.2 mg/mL). A hormetic-like response was observed forF. oxysporum. Liquid Chromatography-Mass Spectrometry (LC-MS) analysis revealed a diverse secondary metabolome, including flavonoids, alkaloids, quinones, and saponins. These results establishP. soloniensisas a promising source of bioactive metabolites for developing eco-friendly fungicides.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Sike Yu,Yan Bao,Lu Gao,Wenbo Zhang,Ruyue Guo,Ye Sun,Jianzhong Ma
Inspired by the spider web predation mechanism, a novel MWCNT/Ni/BC (MNB) aerogel with infrared-radar dual stealth and signal transmission was successfully prepared. • Ni chains and MWCNT/BC aerogel form a cross-scale mechanical interlocking structure that optimizes impedance matching for promoting electromagnetic wave attenuation. • The fluffy 3D space structure combine details excellent mechanical resilience with a conductive MNB aerogel network, enabling outstanding infrared stealth and signal transmission performance. Multifunctional materials integrating infrared stealth, electromagnetic absorption (EMA), and sensing are critical for next-gen intelligent soldier systems, yet the inherent trade-off between sensing and dual stealth performance hinders their development. Inspired by spider web predation, this study fabricated multi-walled carbon nanotube (MWCNT) /Ni chain/bacterial cellulose (MNB) aerogels via magnetic induction and directional freezing. By tuning Ni chain content and pore structure, a new generation of electromagnetic protection material integrating infrared-radar stealth and sensing was developed to enhance individual combat survivability. The optimized MNB aerogel exhibits exceptional EMA and impedance matching: a minimum reflection loss of −69.73 dB at 2.49 mm, specific RL of −2182.19 dB·mm −1 , and an effective absorption bandwidth of 8.14 GHz, while >99% absorption even at 120 °C. Meanwhile, attributable to its low infrared emissivity and excellent thermal insulation, the MNB aerogel maintains stable infrared stealth performance, consistently achieving a temperature difference of 34 °C between the target surface and the hot stage. Furthermore, its elastic conductive network enables a fast piezoresistive sensing response, demonstrating significant potential for individual distress signal transmission in combat scenarios. This study presents a simple strategy for next-gen intelligent electromagnetic protection materials with broad potential in thermal management, aerospace, and health monitoring.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Chuansen Qin,Huan Lu,Yichen Jia,Shuisheng Cao,Hongyan Wang,Haixiang Wang
Background Citri Reticulatae Pericarpium (CRP) authentication and flavonoid-related quality evaluation commonly rely on chromatographic or spectroscopic techniques, which are accurate but require specialized instrumentation. This study aims to develop a standardized colorimetric image-based machine-learning workflow for rapid CRP origin-aging classification and flavonoid-equivalent prediction. Results Representative flavonoid monomers were used to compare chromogenic responses in aluminum chloride and sodium nitrite-aluminum nitrate systems. CRP samples were analyzed using standardized image acquisition, color reference normalization, fixed ROI extraction, engineered RGB descriptors, and inverse sRGB gamma correction for regression modeling. For CRP classification, a 480-record model-development set and a 120-record independent held-out validation set were constructed at the image-group level. Through the two chromogenic systems, RF classifier achieved held-out accuracies of 0.9500, 0.9917, and 0.9500 for geographical-origin, aging-year, and combined origin-aging classification, respectively. For flavonoid-equivalent prediction, gamma correction improved the RF external validation R 2 from 0.9502 to 0.9789 and reduced the external RMSE from 5.4186 to 3.5231. Spike-recovery values were 104.27 % ± 8.94 %, 102.07 % ± 6.36 %, and 96.74 % ± 6.45 % at the 200, 400, and 800 μg/mL addition levels, respectively. Significance The proposed workflow integrates chromogenic reaction, standardized image acquisition, color feature extraction, gamma correction, and machine learning into a low-cost analytical strategy for CRP authentication. The results indicate that the method can serve as a useful tool for rapid and efficient quality evaluation for CRP.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Qifan Guo,Caobin Zhou,Yuan Xu,Ling Zhang,Chunzhong Li
Dissipates stress and stabilizes AgNWs networks via polyrotaxane sliding rings • Achieves 700% strain, GF = 141, and 20,000-cycle stability at 200% strain • Realizes 98% self-healing at 50 °C for 30 min, 13.8 g/(m 2 ·h) air permeability and alkaline degradation • Enables monitoring of human motions for long-term wearable use Flexible resistive strain sensors based on silver nanowires (AgNWs) demonstrate significant potential for wearable electronics and human motion monitoring; however, they face substantial challenges due to severe modulus mismatch and limited cyclic stability under large-amplitude strain. In this context, a sandwich-structured strain sensor was developed based on supramolecular polyurethane functionalized with dynamic polyrotaxane (PR) sliding rings, where the freely mobile α-cyclodextrin units dissipate interfacial stress and stabilize the AgNWs conductive network under repeated stretching. The optimized sensor achieves an ultra-wide operational strain up to 700% and a high gauge factor of 141. Importantly, it maintains a stable resistance response over 20,000 loading-unloading cycles at 200% strain, surpassing all previously reported pristine AgNWs-based counterparts. Additionally, it exhibits 98% mechanical self-healing efficiency at 50 °C within 30 min, along with excellent breathability and alkaline degradability. This research presents a promising strategy for the development of high-performance, sustainable wearable sensing devices.
✓ 已验证
产品关联
DOI
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2026
·
IF 7.1
Tanghui Liu,Yan Jiang,Hanqi Yu,Shiyi Huang,Chang Su,Dong Zhang,Hai Chi,Hongrui Chen,Jie Tang,Xingzhong Zhang
Properties of ZSEO/CA microcapsules with different BW/SBO ratios were evaluated. • Chitosan-based films incorporated with essential oil microcapsules were fabricated. • Composite films performed the enhanced hydrophobicity and antimicrobial activity. • The composite films remarkably prolonged the shelf life of chilled beef for 12 d. This study developed an active composite film using chitosan (CS) as the matrix loaded with essential oil microcapsules. The physicochemical properties of essential oil microcapsules encapsulated with different beeswax/soybean oil (BW/SBO) ratios, along with the effects of their addition levels on the properties of composite films and effectiveness in preserving chilled beef were evaluated. The Zanthoxylum schinifolium essential oil/cinnamaldehyde (ZSEO/CA) loaded microcapsules formed by bacterial cellulose nanofibrils/whey protein isolate (BCNFs/WPI) complexes were successfully fabricated via spray drying, and their performance was adjusted by the composition of the encapsulated oil phase. Among them, the microcapsules fabricated at a BW/SBO ratio of 1:5 exhibited optimal comprehensive performance, yielding the lowest moisture content (4.85%), smallest powder size (6.7 μm) and good flowability. After incorporating the microcapsules into films, the obtained composite films significantly reduced water vapor permeability (WVP) to 0.77 g mm/m 2 •h•kPa and water solubility (WS) to 41.46%, and enhanced antimicrobial activity (inhibition zone diameter: 0.79-0.82 cm). Preservation experiments demonstrated that the composite films effectively extended the shelf life of chilled beef from 6 days to 12 days under 4 °C refrigeration. This research provided some guidance for the development of active food packaging films and application for chilled beef preservation.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2026
·Vol. 42
·期 31
·23040-23050
·
IF 4.4
Wang Yifan,Wu Tianhao,Zeng Fanxue,Zhang Kaishuang,Lu Hailong,Li Rong,Fu Shaohai,Tang Chunxia
Although cellulose-based aerogels possess lightweight
and porous
advantages, their brittle pore wall structure makes it challenging
to simultaneously achieve high electromagnetic shielding performance,
excellent mechanical flexibility, and effective thermal management.
This study employs an emulsion template method combined with a gravity-induced
layering strategy to fabricate a Janus-structured BMX flexible aerogel
film to solve this issue. Flexible and amphiphilic PDMS-NH 2 is used to stabilize the emulsion and further participate in forming
a flexible pore wall. The resulting aerogel film exhibits a gradient
structure with a honeycomb-like porous upper layer and a lamellar
porous bottom layer. This architecture not only enhances electromagnetic
wave absorption loss through multiple reflection mechanisms but also
promotes mechanical strength and in-plane heat conduction via the
oriented layer. The optimal sample, with a thickness of 213 μm,
achieves an average EMI SE of 43.7 dB in the X-band, an in-plane thermal
conductivity of 0.286 W·m –1 ·K –1 , and a tensile strength of 5.4 MPa. It also demonstrates high efficiency
as a thermal interface material for chip cooling. This work provides
new insights for multifunctional integrated material design targeting
next-generation flexible high-power electronic devices.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Chunmei Deng,Fuping Zhang,Jingzheng Bai,Kaixiang Wang,Ayyaz Ahmad,Bo Xing,He Lin,Tingting Wei,Yulin Shi
Atomically dispersed Zn-based catalysts with a fully filled Zn 2+ 3d 10 electronic configuration display exceptional stability for the oxygen reduction reaction (ORR), but their catalytic activity is inferior. Herein, an unsaturated two‑nitrogen coordinated Zn single-atom (ZnN 2 ) anchored on carbon catalyst with highly exposed active sites (denoted as H-ZnN/C) is fabricated via a thermal etching combined with ultrasonic exfoliation strategy. Thermal etching by molten KI salt creates nitrogen defects to form an unsaturated nitrogen coordination structure within para-position ZnN 2 moiety, while ultrasonic treatment exfoliates the carbon layers to form ultrathin carbon nanomesh with a thickness ∼4.3 nm. The experiments and density functional theory calculations reveal that the para-position ZnN 2 moiety can induce electron redistribution of Zn from e g to t 2g orbitals, downshifting the d-band center of Zn, thereby facilitating *OH intermediate desorption. Benefiting from the highly exposed para-position ZnN 2 , H-ZnN/C delivers a half-wave potential ( E 1/2 ) up to 0.88 V , maintains E 1/2 with negligible shift after 10,000 cycles, and resists poisoning by methanol, SCN − and S 2− , all exceeding the performance of commercial Pt/C catalysts. This work provides a new prospect for rational design of high-performance and robustness ORR electrocatalysts. Download: Download high-res image (183KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
TALANTA
·
2026
·
IF 6.7
Song Yang,Qianqian Wu,Xiaona Zhai,Shuai Wang,Fengling Song,Tiantian Zhang,Pengcheng Wang,Debin Ji
Protein detection is essential for disease diagnosis and biomarker analysis but often relies on antibodies and sophisticated instrumentation. Here, we report a signal-amplified protein detection strategy based on chimeric ascorbic acid-2-phosphate (AAP)-releasing nucleotide probes and strand displacement amplification (SDA). Two tetraphosphate nucleotide analogs, dAP 4 AA and dTP 4 AA, were synthesized by covalently linking AAP to dATP and dTTP, respectively. These probes were efficiently recognized and incorporated by DNA polymerase during DNA synthesis, resulting in the release of AAP, which was subsequently hydrolyzed by shrimp alkaline phosphatase to generate ascorbic acid (AA). The produced AA was quantified through its reaction with o -phenylenediamine (OPDA), yielding a fluorescent quinoxaline derivative. By coupling aptamer-mediated target recognition, SDA, and AA-based fluorescence transduction, an antibody-free sensing platform was established for protein analysis. This approach exhibited linear fluorescence responses over the nanomolar concentration range for streptavidin (SA) and SARS-CoV-2 nucleocapsid (N) protein with detection limits of 72.4 and 346 pM, respectively. The platform displayed excellent selectivity against non-target proteins and achieved satisfactory recoveries (97.2–104.0%) in spiked serum samples. Comparison with a commercial ELISA kit showed no statistically significant difference between the measured results. This study broadens the range of functional nucleotide probes and establishes a general strategy for coupling DNA amplification with small-molecule signal generation for protein detection.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF STRUCTURAL CHEMISTRY
·
2026
·
IF 10.5
Yan Sun,Yafei Qian,Ning An,Jingwei Huang,Houde She,Lei Wang,Qizhao Wang
The [3+3]-type TAPT-MCOF with enhanced surface area and favorable mass transport was constructed, accompanied by the [3+2] Dip-MCOF as counterpart. • The electron-deficient-rich design in TAPT-MCOF highly intensify local asymmetric charge distribution and facilitate photogenerated carrier separation. • TAPT-MCOF exhibits significant improvement in dual-photocatalysis, both of the production rate in H 2 O 2 synthesis and CO 2 conversion are higher than Dip-MCOF. Photocatalytic technology is an effective approach to address energy shortages and environmental problems. However, developing efficient and stable multifunctional photocatalysts remains a challenging task. In this study, two metal-covalent organic frameworks (MCOFs) were synthesized using a trinuclear copper cluster as the electron-rich node: TAPT-MCOF with a [3+3] configuration and Dip-MCOF with a [3+2] configuration. In the absence of sacrificial agent, TAPT-MCOF exhibits improved visible-light-driven photocatalytic performance in both hydrogen peroxide (H 2 O 2 ) synthesis and carbon dioxide (CO 2 ) reduction. The H 2 O 2 production rate is 261.8 μmol g -1 h -1 , about 2.4 times that of Dip-MCOF. The reaction rate for CO 2 reduction is also higher than that of Dip-MCOF. The enhanced behavior originates from two synergistic effects: (ⅰ) the specific surface area of TAPT-MCOF in the [3+3] configuration affords favored transport channels for efficient mass migration, including the reactants and products; and (ⅱ) the triazine group with electron-deficient property (EDP) and the trinuclear copper (Cu 3 Py) cluster with electron-rich property (ERP) in TAPT-MCOF create a highly intensified local asymmetric charge distribution, effectively promoting the photogenerated electron-hole separation. This finding provides guidance for designing efficient bifunctional photocatalysts by leveraging the dual structure regulation of porous frameworks. The [3+3] configuration and relatively electron-deficient triazine unit endow TAPT-MCOF with enhanced mass and charge transport, promoting its bifunctional photocatalytic performance for both H 2 O 2 synthesis and CO 2 reduction. Download: Download high-res image (293KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子