CRYSTENGCOMM
·
2023
·Vol. 25
·期 46
·6489-6495
·
IF 3.1
Yali Ma,Haitang Wang,Hailong Wang,Jiani Wang,Shuaiyu Jiang,Qiang Zheng,Songyan Jia,Xue Li,Tianyi Ma
By utilizing a winding carboxylic acid ligand as the linker and 12-connected Hf6 clusters as the metal node, we successfully construct a novel hafnium-based metal–organic framework [Hf6O4(OH)4(DCPB)6]·(Hf-MOF, 1,3-di(4-carboxyphenyl)benzene (H2DCPB)) with ultra-microporous structure. Benefitting from the strong coordination bond between Hf6 clusters and the carboxylic acid ligand, the synthesized Hf-MOF displays extraordinarily high thermal and chemical stability, in which the Hf-MOF can maintain high crystallinity under both acidic and basic aqueous solutions, and its decomposition temperature is as high as about 400 °C. Moreover, the interpenetrated framework can endow the Hf-MOF with ultra-microporous pores, which can provide multiple adsorption sites and play a role in the size sieving effect of CO2 molecules. Thus, the Hf-MOF displays excellent CO2 adsorption and separation performance, in which the maximum CO2 adsorption amount can reach up to 65.5 cm3 g−1 at 273 K and 1 bar, and the selectivities for CO2/CH4 = 0.5/0.5 and CO2/CH4 = 0.05/0.95 are as high as 6.9 and 6.0 under 1 bar at 298 K, respectively, and surpass many reported water stable MOF materials. The commendable stability and the CO2 adsorption/separation ability are of extreme importance for its practical industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 41
·16033-16045
·
IF 4.5
Tian Yuhao,Li Ting,Cai Weijie
Recently, bio-ethanol reforming with CO 2 (EDR) has been considered as one of the environment-friendly processes to diminish the emission of greenhouse gas, along with increasing the production of value-added syngas. However, designing high-performance catalysts is still a great challenge. In this work, MOF-derived CoMO x (M:Ce,Zr,Zn) catalysts were applied in EDR reaction for the first time to explore the influence of support types on catalytic performance. Characterization of the investigated catalysts by XPS, XRD, H 2 -TPR, Raman, TEM and BET depicted the difference in cobalt dispersion, specific surface area as well as Co-support interaction. Indeed, H 2 -TPR and XPS results revealed stronger Co-Ce interaction and the smaller particle size of Co 3 O 4 in Co-CeO 2 catalyst which contributed to higher activity. Indeed, 100% of ethanol conversion was obtained at 550 °C and the formed H 2 /CO ratio (1.18) was suitable for the downstream Fischer–Tropsch process. Meanwhile, no remarkable decline of ethanol conversion and product distributions occurred after 40 h stability tests. The findings implied that EDR process might be suitable to consume greenhouse gas and reduce carbon footprint. Characterization results of the used catalysts indicated that Co-CeO 2 catalyst presented an outstanding anti-aggregation and anti-coking property. Herein, the effect of support type in this work might provide guidance for the design of high-performance catalysts for other heterogeneous reactions operated at high temperature. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
JOM
·
2023
·
IF 2.6
Guo Yufeng,Wang Chao,Wang Shuai,Chen Feng,Yang Lingzhi,Zheng Yu
Avoiding the formation of anosovite phase during the ilmenite reduction process is crucial for the preparation of boiling chloride stove. In this study, the dominant regions of different reduction products of ilmenite in CO-CO 2 system and the phase transformation behavior of pure ilmenite in the reduction process were studied by XRD and SEM-EDS analysis. It was confirmed that the reduction of ilmenite (FeTiO 3 ) at < 1150°C went through two stages: the formation of metal iron (Fe) with rutile (TiO 2 ) and metal iron (Fe) with anosovite (Ti 3 O 5 ). At > 1150°C, the reduction of ilmenite went through two stages: the formation of metal iron (Fe) with pseudobrookite (FeTi 2 O 5 ) and metal iron (Fe) with anosovite (Ti 3 O 5 ). As a typical ilmenite resource, Panzhihua ilmenite is used to study the reduction behavior of actual ore in CO-CO 2 system. The reaction of forming metal iron (Fe) with pseudobrookite (FeTi 2 O 5 ) could occur at 1000°C, and magnesium was dissolved in the product during the formation of anosovite. The presence of magnesium reduces the dominant area of metal iron (Fe) with rutile (TiO 2 ), which is not conducive to the reduction of iron.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Tianwei Wang,Quan Zhang,Kang Lian,Gaocan Qi,Qian Liu,Ligang Feng,Guangzhi Hu,Jun Luo,Xijun Liu
Metal-organic frameworks (MOF) derived carbon materials are considered to be excellent conductive mass transfer substrates, and the large specific surface area provides a favorable platform for loading metal nanoparticles . Tuning the coordination of metals through polyacid doping to change the MOF structure and specific surface area is an advanced strategy for designing catalysts. Modification of Fe-doped ZIF-8 pre-curing by pyrolysis of phosphomolybdic acid hydrate (PMo), Fe nanoparticles confined by Mo and N co-doped carbon frameworks (Fe-NP/MNCF) were fabricated, and the impact of PMo doping on the shape and functionality of the catalysts was investigated. The Zn-air battery (ZAB) driven CO 2 electrolysis was realized by using Fe-NP/MNCF, which was used as bifunctional oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO 2 RR) catalysts. The results show that the half-wave potential (E 1/2 ) of Fe-NP/MNCF is 0.89 V, and the limiting diffused current density ( j L ) is 6.4 mA cm −2 . The ZAB constructed by Fe-NP/MNCF shows a high specific capacity of 794.8 mAh g Zn −1 , a high open-circuit voltage (OCV) of 1.475 V, and a high power density of 111.6 mW cm −2 . Fe-NP/MNCF exhibited efficient CO 2 RR performance with high CO Faraday efficiency (FE CO ) of 87.5 % and current density for the generation of carbon dioxide ( j CO ) of 10 mA cm −2 at −0.9 V vs RHE. ZAB-driven CO 2 RR had strong catalytic stability. These findings provide new methods and techniques for the preparation of advanced carbon-based catalysts from MOFs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2023
·
IF 8.7
Yanli Wang,Lina Liu,Changzai Ren,Jiao Ma,Boxiong Shen,Peng Zhao,Zhikun Zhang
Municipal solid waste (MSW) incineration fly ash (FA) is classified as hazardous waste , and strategies for recycling FA have attracted attention. In this study, the porous geopolymer spheres (PGS) were prepared from FA by the foaming-suspension-solidification method, and then the PGS were functionalized with tetraethylenepentamine (TEPA) to capture CO 2 . The results showed that washing pretreatment and the addition of H 2 O 2 foaming agent enhanced the pore volume and specific surface area of PGS. The CO 2 adsorption capacity of amine-functionalized PGS exhibited a trend of increasing and then decreasing in the range of 35–80 °C. The maximum adsorption capacity of TEPA-WPGS3 was 2.55 mmol/g at 65 °C higher than expected for the average of TEPA and PGS. This was because PGS improved the dispersion of TEPA, thus exposing more active sites of TEPA and making it more likely to interact with CO 2 . The adsorption efficiency of amine-functionalized PGS decreased by only 2.4% after 10 cycles, indicating that it has excellent regeneration performance. In addition, amine-functionalized PGS, which showed excellent CO 2 adsorption capacity, had a significant ability to selectively adsorb CO 2 and the adsorption capacity of the rapid stage accounted for approximately 80% of the saturated adsorption capacity. This study shows that FA-derived geopolymers have excellent CO 2 adsorption properties and provides a new method for the resource utilization of FA.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Yibo Ma,Xiangyu Xu,Tianyi Yang,Yuying Shen,Feng Jiang,Yawei Zhang,Xiaoting Lv,Yunming Liu,Bo Feng,Guangbo Che,Lijing Wang
The development of bifunctional reaction by combining CO 2 reduction with antibiotics degradation is of great significance. Designing bifunctional catalysts with excellent performance is the focus of scholars' research. In this paper, Co-doped BiOBr ultra-thin nanosheets exposing rich (102) active crystal faces were prepared by one-step hydrothermal method. Since Co 2+ has a smaller radius than Bi 3+ , Co was successfully incorporated into the lattice of BiOBr, which changed the crystal structure of BiOBr and obtained thinner nanosheets with rich lattice defects. The Gibbs free energy of CO 2 reduction reaction was synergistically optimized by the combination of exposing (102) active crystal faces and introducing lattice defects. In addition, the addition of Co changed the band structure of BiOBr and improved the carrier separation ability, making Co-BiOBr be an excellent bi-functional photocatalyst for CO 2 reduction and co-degradation of tetracycline, realizing the synergistic process of environmental purification and energy conversion. This work provides theoretical and experimental reference for the rational design of bifunctional photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULAR RAPID COMMUNICATIONS
·
2023
·Vol. 44
·期 24
·2300477
·
IF 4.6
Yuan Liu,Binghui Xue,Jiadong Chen,Yuyan Lai,Panchao Yin
The emergence of polymers with intrinsic microporosity provides solutions for flexible gas separation membranes with both high gas permeability and selectivity. However, their applications are significantly hindered by the costly synthetic efforts, limited availability of chemical systems, and narrow window of microporosity sizes. Herein, flexible mixed matrix membranes with tunable intrinsic microporosity can be facilely fabricated from the coordination assembly of polymer brushes and coordination nanocages. Polymer brushes bearing isophthalic acid side groups can coordinate with Cu 2+ to assemble into polymer networks crosslinked by 2 nm nanocages. The semi-flexible feature of the polymer brush and the high crosslinking density of the network prevent the network from collapsing during solvent removal and the obtained aerogels demonstrate hierarchical structure with dual porosity from the crosslinked polymer network and coordination nanocage, respectively. The porosity can be facilely tuned via the amount of Cu 2+ by regulating the network crosslinking density and nanocage loadings, and finally, optimized gas separation that surpasses Robeson upper bound for H 2 /CO 2 can be achieved. The coordination-driven assembly protocol paves a new avenue for the cost-effective synthesis of polymers with intrinsic microporosity and the fabrication of flexible gas separation membranes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED ENGINEERING MATERIALS
·
2023
·Vol. 25
·期 22
·2301062
·
IF 3.6
Binxia Yuan,Hong Qian,Lan Cao,Rui Zhu,Weiling Luan
Herein, H + in oxalic acid is used instead of Na + to obtain titanate nanosheets through P200 hydrolysis, which further curls to form a multilayer TiO 2 nanotubes (NTs) structure. Then, Cu 2 O quantum dots (QDs) are successfully loaded on TiO 2 NTs via a hydrothermal method using fructose as a reducing agent. The optical, impedance, and photocurrent tests indicate that the composite structure improves its optoelectronic performance. The photocatalytic H 2 production and CO 2 reduction efficiency of Cu 2 O QDs/TiO 2 NTs are lower than those of TiO 2 NTs. However, the molar ratio of CH 4 to CO produced by CO 2 reduction of Cu 2 O QDs/TiO 2 NTs composite catalyst is greater than that of pure TiO 2 NTs. The CH 4 production accounts for 97%, indicating that the composite catalyst has a high CH 4 selectivity. The experimental and density functional theory calculation results prove that the Z-scheme heterojunction accelerates the separation and transfer of photogenerated carriers, and broadens the absorption range of visible light.
✓ 已验证
产品关联
DOI
高影响因子
SOLID STATE IONICS
·
2023
·
IF 3.2
Jinghe Bai,Defeng Zhou,Leilei Niu,Ruyi Chen,Xiaofei Zhu,Ning Wang,Qingwen Liang,Wenfu Yan
The development of cathode materials with high oxygen reduction reaction (ORR) activity and stability in intermediate temperature (IT) environments is a key factor in the commercialization of solid oxide fuel cells (SOFC). In this paper, the ORR activity of the cathode is improved by doping high-valent Sc 3+ ions at the B-site of the Sr 0.5 La 0.5 Co 0.8 Cu 0.2-x Sc x O 3–δ (x = 0, 0.02, 0.04), in which Sr 0.5 La 0.5 Co 0.8 Cu 0.18 Sc 0.02 O 3–δ (SLCCS2) shows the best electrochemical performance , and the area-specific resistance of SLCCS2 at 700 °C is only 0.047 Ω cm 2 , much lower than the 0.087 Ω cm 2 of Sr 0.5 La 0.5 Co 0.8 Cu 0.2 O 3–δ (SLCC), and the peak power density of SLCCS2 reached 1.098 W cm −2 , which is 1.84 times that of SLCC (0.598 W cm −2 ). In addition, SLCCS2 effectively reduces the thermal expansion coefficient , improves thermal matching with traditional electrolytes, and overcomes the problem of insufficient long-term SOFC stability caused by the high thermal expansion coefficient of Co-based perovskite to a certain extent. SLCCS2 also exhibits excellent CO 2 tolerance. Considering comprehensively, SLCCS2 is expected to become an IT-SOFC cathode material with development potential.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Zhiwei Dong,Yudong Ding,Fei Chen,Xun Zhu,Hong Wang,Min Cheng,Qiang Liao
The inefficient conversion of carbon dioxide (CO 2 ) to methane often restricts the advancement of CO 2 biomethanation technologies . This study explored the degrading performance, microbial community compositions, and functional gene abundance to examine the impact of zirconium metal-organic frameworks (Zr-MOFs) on the CO 2 biomethanation process. The results showed that the maximum utilization rates of CO 2 and H 2 increased by 2.77 times and 2.36 times after the addition of Zr-MOFs, respectively, and the corresponding conversion rate of CO 2 to methane also increased by 57.53%. Additionally, Zr-MOFs enhanced the COD removal efficiency and hydrolysis of tryptophan-like proteins and humic acid-like substances, resulting in more volatile organic compounds, such as tetradecane, 2-pentanone, and hexadecanoic acid. The analysis of microbial community structure revealed that the relative abundance of Methanothrix and Metanobacterium increased by 24.40% and 36.02% after the addition of Zr-MOFs, respectively. The methane metabolism revealed that Metanobacterium was a member of the same aceticlastic methanogenic pathway as Metanothrix , which encodes acetyl-CoA synthetase to catalyze the synthesis of acetyl-CoA from acetate, and Zr-MOFs also increased the relative abundance of genes that encode the enzyme responsible for converting intermediates to methane. Finally, Zr-MOFs improved the biogenesis and utilization of acetate and hydrogen (H 2 ) by enhancing the activity of enzymes, thereby providing more nutrients for methanogenesis . This study provided thorough explanations for the application and improvement of Zr-MOFs in CO 2 biomethanation technology.
✓ 已验证
产品关联
DOI
高影响因子
Membranes
·
2023
·Vol. 13
·期 9
·781
·
IF 4.2
Jiaming Gao,Yongchao Sun,Feifei Kang,Fei Guo,Gaohong He,Hanli Wang,Zhendong Yang,Canghai Ma,Xiaobin Jiang,Wu Xiao
Mixed matrix membranes (MMMs) generally have some fatal defects, such as poor compatibility between the two phases leading to non-selective pores. In this work, PIM-1 was chosen as the polymer matrix, and UiO-66 modified with amidoxime (UiO-66-AO) was used as the filler to prepare the MMMs. In the MMMs, the amino and hydroxyl groups on UO-66-AO form a rich hydrogen bond network with the N and O atoms in the polymer PIM-1 chain to improve the compatibility between the polymer matrix and the filler. In addition, the selective adsorption of CO2by the amidoxime group can promote the transport of CO2in the membrane, which enhances the gas selectivity. The CO2permeability and CO2/N2selectivity of UiO-66-AO@PIM-1 MMMs are increased by 35.2% and 45.2% compared to pure PIM-1 membranes, reaching 7535.5 Barrer and 26.9, surpassing the Robeson Upper Bound (2008) and close to the 2019 Upper Bound. After 38 days of the aging experiment, the CO2permeability is approximately 74% of the original. The results show that the addition of UiO-66-AO has an obvious effect on improving the aging properties of the membrane. The UiO-66-AO@PIM-1 MMMs have a bright prospect for CO2separation in the future.Keywords:amidoxime;UiO-66-AO;mixed matrix membrane;PIM-1;CO2/N2separation
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2023
·
IF 4.6
Jing Xie,Jianguo Huang,Dilireba Turgan,Zhenjiang Lu,Jindou Hu,Yue Feng,Yali Cao
Constructing heterojunctions with strong interfacial interactions can accelerate the transfer and separation of photogenerated charge carriers. However, finding a simple strategy to construct tightly connected heterojunctions remains a major challenge. In this work, AgBr/BiOBr S-scheme heterojunctions were designed via a straightforward co-anionic strategy without using a solvent. The experimental results indicate that the AgBr/BiOBr heterojunction with a close contact interface can extend the use of visible light, accelerate the separation, and induce the transfer of photoelectrons and holes while maintaining an excellent redox capacity. Undoubtedly, the photocatalytic reduction rate of carbon dioxide to carbon monoxide by 1.0 AgBr/BiOBr is 87.73 μmol·g–1·h–1 (quantum efficiency is 0.57%), which is 12.15 times and 4.45 times higher than that of pure AgBr and BiOBr, respectively. The present work provides insights into a simple strategy for the preparation of strongly interacting interfacial heterojunctions for photocatalytic CO2 reduction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子