ACS Applied Nano Materials
·
2025
·
IF 5.5
Xiaowei Ma,Lin Tan
Metal–organic frameworks (MOFs)-derived compounds exhibit tremendous potential for applications in the field of microwave absorption, attributed to their unique structural characteristics, high specific surface area, and tunable magnetic and dielectric properties. However, their practical application in the microwave absorption field is limited by poor impedance matching. To address this issue, we successfully synthesized a composite microwave-absorbing material, labeled as Fe/Fe2O3/C/N,SGPE, by introducing heteroatom (N and S) codoped graphene (labeled as N,S-GPE) into an Fe/Fe2O3/C MOF derivative and employing a solvothermal method followed by subsequent pyrolysis. The introduction of N and S codoped graphene introduces defects and disordered structures, thereby enhancing interface and dipolar polarization processes, which in turn improve the dielectric properties and optimize impedance matching. The experimental results demonstrate that when the addition amount of N,S-GPE is 0.15 g, the material exhibits a maximum reflection loss of -62.8 dB at 7.6 GHz with a thickness of 3.09 mm, capable of absorbing over 99.9999% of microwaves. Consequently, this composite stands out as a promising candidate for high-efficiency microwave absorbers.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2025
·
IF 7.7
Hao Meng,Yue Wang,Haiyan Yang,Jinglong Han,Dillirani Nagarajan,Shih-Hsin Ho,Jo-Shu Chang
Advanced oxidation processes, especially those engaging in persulfate activation, are one of the emerging technologies for the degradation of recalcitrant organic pollutants. This study used Fe and Mn-loaded Prussian blue analogs (FeMn-PBA) as precursors to synthesize a nitrogen-doped graphene shell (FeMn@NG) through calcination in a nitrogen atmosphere. This was then employed as a catalyst to initiate the degradation of sulfadiazine (SD) using persulfate. The encapsulated FeMn bimetallic nanoparticles with various oxidation states undergo redox cycling, which promotes the rapid generation of free radicals and maintains the stability of FeMn@NC by sustaining continuous persulfate (PDS) activation. The results showed that nearly 96 % of SD was degraded within 45 min. Experiments involving free radical quenching and electron paramagnetic resonance spectroscopy demonstrated that sulfate radicals (SO 4 ·− ) and superoxide radicals (O 2 ·− ) were primarily responsible for the degradation of SD. The impact of different process parameters on the degradation efficiency of SD was simultaneously investigated. The degradation products of SD were examined, and a degradation pathway was proposed according to the LC-MS findings. XPS analysis indicated the presence of Fe/Mn redox cycling, which played a role in the equilibrium electron transfer during PDS activation. This study provides insights into the rational design of efficient catalysts by combining Prussian blue analogs with FeMn, while also promoting the remediation of polluted water bodies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2025
·
IF 4.3
Xiaoqiang Li,Xin Zhang,Xiaorui Zhang,Hao Lu,Jian Wang,Siyuan He,Xiaoxiao Duan,Yongsheng Ren
2-Mercaptobenzothiazole (MBT), a widely utilized metal corrosion inhibitor in industrial production processes, has become a typical persistent organic pollutant (POP) in the circulating water of coal chemical pipelines. In this study, Fe/Mn bimetallic MOF materials supported on carbon fiber paper (PC) were employed for the first time as an electro-Fenton cathode (Fe/Mn@MPC) in a heterogeneous electro-Fenton system, achieving efficient degradation of MBT. Specifically, this novel cathode enabled 96.35 % removal of MBT within 2 h. The uniformly rough fiber morphology presented by the Fe/Mn@MPC cathode results in an increased electrochemically active surface area and reduced resistance. Remarkably, it maintains a very stable catalytic activity over a wide pH range (3–11) and after 10 h of continuous operation, which confirms that the bimetallic synergistic effect enhances the stability of the system. EPR and quenching experiments identified hydroxyl radicals as the primary active species. Based on HPLC-MS results, MBT degradation pathways involving sulfur oxidation intermediate cleavage and benzothiazole ring detachment were proposed. This work presents a promising cathode design for the treatment of thiol-containing wastewater and offers new insights into the efficient remediation of coal chemical wastewater.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2025
·
IF 9.8
Tong Wei,Kai Li,Senlin Shao,Gang Wen,Jianwei Bu,Tinglin Huang
Nanofiltration membranes (NFMs) are promising candidates for advanced drinking water treatment due to their excellent retention capabilities, however, their widespread application is limited by low water permeance and susceptibility to inorganic scaling. In this study, Fe(III)-tannic acid‑molybdenum disulfide (Fe(III)-TA-MoS 2 ) nanosheets were synthesized and employed as an interlayer material for NFM fabrication. The resulting NFMs were then created through interfacial polymerization, labeled as MoS 2 -1.5, MoS 2 -3.0, and MoS 2 -4.5 based on varying materials loading. Experimental results indicated that the membrane morphology, surface roughness, electronegativity, amine group content, hydrophilicity, selectivity, and resistance to inorganic scaling were all affected by the amount of Fe(III)-TA-MoS 2 loading. The MoS 2 -3.0 NFM exhibited the highest roughness and uniformity (Ra: 111.25 ± 3.30 nm), along with enhanced hydrophilicity and the smallest pore size (0.39 nm) among the Fe(III)-TA-MoS 2 NFMs. These characteristics contributed to a high water permeance of 20.19 LMH/bar. Sulfate rejection decreased notably with increasing amine content, while calcium ion rejection showed a slight decline as surface electronegativity increased. Notably, the pore size of the Fe(III)-TA-MoS 2 NFMs remained largely unchanged at low and moderate loadings. Although the MoS 2 -4.5 NFM exhibited even higher water permeance and electronegativity, its surface structure underwent significant changes, leading to inferior performance in terms of scaling resistance and natural organic matter removal compared to the MoS 2 -3.0 membrane. Overall, this study provides a novel strategy for enhance both water permeability and anti-scaling performance of NFMs, offering potential cost reductions for drinking water treatment applications.
✓ 已验证
产品关联
DOI
高影响因子
Acta Biomaterialia
·
2025
·
IF 9.6
Pai Wang,Heshi Liu,Lei Guo,Yixin Tang,Tianwei Lan,Rui Zhou,Huiqing Xu,Lu Wang,Xue Wang,Baiqiao Chen,Yixing Wang,Siyuan Wang,Chang Liu,Jie Chen,Caina Xu,Quan Wang,Huayu Tian
Colorectal cancer (CRC) remains a major global health burden as the third most commonly diagnosed malignancy and the second leading cause of cancer-related mortality worldwide. While combination chemotherapy and immune agonists hold potential to overcome tumor heterogeneity through multi-pathway modulation, their therapeutic efficacy remains limited by off-target drug distribution and immunosuppressive tumor microenvironment (TME). To address this, we developed a tumor-targeted chemo-immunotherapy platform by encapsulating irinotecan (CPT-11) and resiquimod (R848) in hyaluronic acid (HA) coated MIL-100(Fe) metal-organic frameworks (CRMH NPs), enabling CD44-mediated delivery and synergistic anti-tumor responses. The system enabled controlled drug release in the acidic TME, promoting immunogenic cell death (ICD), inducing the cGAS-STING pathway and activating immune cells. In vitro , CRMH NPs induced significant ICD, as evidenced by the release of damage-associated molecular patterns (DAMPs) like high mobility group box 1 (HMGB1) and calreticulin (CRT), and matured dendritic cells (DCs), which triggered by TLR7 agonist, enhancing immune responses. It also activated the cGAS-STING pathway, which could efficiently induce the targeted cells to produce type I interferon (IFN) and proinflammatory cytokines, thereby enhancing T cell activation and recruitment. In vivo , CRMH NPs significantly reduced tumor growth in CT26 mouse models, activated innate immune signaling, and increased immune cell infiltration, demonstrating superior anti-tumor effects compared to free drugs and other nanoparticle formulations. Furthermore, CRMH NPs upregulated PD-L1 expression on tumor cells, suggesting potential synergy with immune checkpoint blockade therapy. Combining CRMH NPs with anti-PD-L1 therapy enhanced anti-tumor immunity, particularly in distant tumors, highlighting a promising approach to overcoming immune evasion and achieving durable tumor regression. These findings supported CRMH NPs as a versatile and effective platform for chemo-immunotherapy in CRC. Statement of Significance Colorectal cancer (CRC) remains a major global health challenge with limited treatment efficacy due to tumor heterogeneity and immunosuppression. This study introduces a novel tumor-targeted nanoparticle platform, CRMH NPs, which co-deliver the chemotherapeutic drug irinotecan (CPT-11) and the immune agonist resiquimod (R848) using hyaluronic acid-coated MIL-100(Fe) metal-organic frameworks. CRMH NPs enhance drug delivery, induce immunogenic cell death, and activate the cGAS-STING pathway, synergizing chemotherapy and immunotherapy. Demonstrating superior tumor suppression and immune activation in preclinical models, this platform overcomes key limitations of current therapies, such as off-target effects and immune evasion. Its combination with anti-PD-L1 therapy further improves outcomes, offering a promising strategy for durable CRC treatment. This work advances nanomedicine and immuno-oncology, providing a transformative approach for cancer therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2025
·
IF 21.1
Feitong Chen,Yulin Fan,Zhuohan Lin,Zhixian Li,Xueqing Qiu,Hongming Lou,Yuxia Pang
This study presents a pH-switchable Fenton-like system based on sulfur-doped FeP synthesized via a confined gas–solid strategy, where ·OH dominates at pH 3.0 and Fe(IV)=O prevails at pH 6.0. Sulfur incorporation modulates the FeP electronic structure by expanding the lattice, enhancing Fe–P covalency, and increasing electron density, thereby promoting charge transfer and reducing the activation barrier for H 2 O 2 activation. The optimized FePS 15 catalyst achieved ~99% sulfamethoxazole degradation (150 mg/L) within 15 minutes, exhibiting a reaction rate 2.54 times higher than that of undoped FeP. When further supported on lignin-derived carbon spheres (FePS 15 @LC), it exhibited enhanced structural integrity, suppressed iron leaching, and improved reusability. These findings demonstrate that sulfur doping drives pH-dependent ROS switching from ·OH to Fe(IV)=O, supporting adaptable Fenton-like catalysis. This work improves mechanistic insight into ROS modulation and enables pH-adaptable advanced oxidation processes for pollutant removal.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2025
·
IF 4.6
Yaqi Wu,Jianhua Qian,Jinjuan Xing,Junhua Li,He Huang,Yanan Wang,Xueming Kang,Lijuan Wang,Jiasheng Xu
Volatile organic compounds (VOCs), as hazardous environmental pollutants emitted from chemical industries, cause significant threats to human health and ecological environment owing to their inherent toxicity and carcinogenicity. Catalytic oxidation has emerged as a promising technology for VOC elimination, enabling complete degradation of pollutants into CO 2 and H 2 O. This study investigates transition metal oxide (TMO x , TM = Mn, Co, Fe, Ni, Cu, Zn)/TiO 2 catalysts for toluene degradation. Since the catalytic efficacy of TiO 2 -based catalysts critically depends on the quantity of surface oxygen vacancy (O v ) in heterogeneous processes, we engineered O v -rich interfaces by breaking atomic periodicity arrangements and generating unsaturated coordination sites. These structural modifications enhanced oxygen migration rates and increased reactive oxygen species availability. Among the synthesized catalysts, CuO/TiO 2 exhibited the highest performance, achieving 90 % toluene conversion (T 90 ) at 286 °C under a weight hourly space velocity (WHSV) of 20,000 mL/(g·h) with an initial toluene concentration of 1000 ppm. The measurement of in-situ DRIFTS suggested that toluene oxidation process abided by the path of toluene → benzaldehyde → benzoic acid → anhydride →CO 2 and H 2 O. Furthermore, the by CuO/TiO 2 catalyst demonstrated great reusability, and long-term stability, highlighting its potential for industrial-scale VOC abatement applications.
✓ 已验证
产品关联
DOI
高影响因子
Nano Materials Science
·
2025
·
IF 17.9
Lingling Yan,Keyu Long,Tianmi Wang,Luolin Deng,Linfu Li,Qinghan Zhou
Herein, a novel covalent-organic framework (COF) coated Fe doped hollow carbon nanosphere (HCNS), Fe-HCNS@COF, was prepared for selective adsorption and photocatalytic reduction on dye pollutant in water. The Fe-HCNS@COF displays a high affinity to malachite green (MG) with a distribution coefficient ( K d ) of 6.931, which can be attributed to the confinement effect by the π−π stacking between the benzene ring in MG and triazine ring in COF. Pseudo second order (PSO) kinetics ( R 2 = 0.9914) and Langmuir isotherm model ( R 2 = 0.970 9) match better to Fe-HCNS@COF on MG adsorption indicating a chemisorption with mono-layer interface. Additionally, enhanced catalytic efficiency of the nanospheres on MG reduction at 96.3% was observed under sunlight irradiation with improved reusability after five cycles (74.4%). The catalytic mechanism investigation indicates that 1 O 2 , •O 2 − , and •OH play significant role in the catalytic process, and Fe-HCNS@COF exhibits a smaller E g at 1.53 eV compared to COF (1.86 eV), signifying enhancement for separation of hole-electron pairs. A continuous flow device was established to investigated the real application in dye removal, achieving an 88.7% removal rate for MG degradation after 40 h continuous operation. Moreover, an improved bacterial inhibition rate over 99% was found against both Gram-negative and Gram-positive bacteria. In conclusion, the as prepared Fe-HCNS@COF provides us a novel nano-platform with multiple-function for the potential application of dye removal in real water management.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2025
·
IF 8.4
Bo Cai,Shuiping Ouyang,Jingyao Fan,Chao Liu,Yongjian Zhang,Zechang Wei,Zhinan Wang,Xuechun Wang,Hong Lei
With the overuse of antibiotics, the aquatic environment has been heavily polluted, which has serious negative impacts on various organisms. AOPs degradation system is a promising treatment approach for wastewater of antibiotics. Herein, an efficient, stable and low-cost Fe, N co-modified biochar derived spent coffee ground was developed for activation of PMS to remove TC. 1Fe1N-C-800 biochar provided a 100 % removal rate of TC (50 mg/L) within 30 min at room temperature, which was higher than 1Fe-C-800 (73 %) and 1N-C-800 (40 %). Meanwhile, EPR and quenching experiments indicated that • O 2 − , • OH, • OH/SO 4 •- and 1 O 2 radicals were oxidized species, where the • O 2 − provided the greater contribution during the reaction. Furthermore, the possible PMS activation mechanism and degradation pathway of TC were proposed. Moreover, the Fe, N co-modified biochar showed high activity and stability at broad-pH conditions, and also a broad-spectrum ability to remove various organic pollutants. This study developed an approach for the preparation of highly efficient and stable modified biochar and supplied a sustainable choice for antibiotic wastewater treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2025
·
IF 4.6
Yangyang Zhao,Haowei Li,Xiaoyu Wang,Tao Cong,Yijian Wang,Hesheng Zheng,Zhongyi Zhao,Xingchen Feng,Juntao Feng,Pei Wang,Kai Yang,Xifeng Ding
Solid oxide electrolysis cells (SOECs), featuring high current density and Faradaic efficiency, have been extensively recognized for CO 2 electrolysis abilities. However, it is a challenge to find high performance electrode materials with excellent catalytic activity and preferable stability. Herin, hetero-structured perovskite with exsolved Co-Fe nanoparticles is developed via in - situ reduction of the (Ba 0.9 K 0.1 ) 0.9 Co 0.5 Fe 0.4 Nb 0.1 O 3- δ ((BK) 0.9 CFNb). The corresponding SOEC R-(BK) 0.9 CFNb/LSGM/LSCF achieves excellent electrochemical performance with a current density of 0.813 A cm −2 at 1.5 V and 800 °C, which is 30 % higher than the counterpart with untreated (BK) 0.9 CFNb cathode. Its high catalytic activity is attributed to electron feeding effect of in situ exsolved Co-Fe nanoparticles and enhanced CO 2 adsorption with high concentration of oxygen vacancies in perovskite substrate surface. Moreover, the R-(BK) 0.9 CFNb-cell shows much better stability than parent (BK) 0.9 CFNb-cell, which is ascribed to the structural anchoring of the alloy nanoparticles. This study provide an attractive strategy for the future development of SOECs.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Sijie Liu,Rui Shu,Jiaqi Ma,Leina Dou,Wentao Zhang,Shaochi Wang,Yanwei Ji,Yuechun Li,Jingke Xu,Daohong Zhang,Mingqiang Zhu,Yumei Song,Jianlong Wang
Lateral flow immunoassay (LFIA) is a paper-based point-of-care (POC) diagnostic tool for widespread applications. Nonetheless, the lack of multi-target monitor capability, high-affinity between signal tag and antibody, and multi-signal readout capability still remain challenges. Herein, a mussel-inspired Fe-based Tannic acid (TA) Nanozyme (FTAN) mediated dual-readout and dual-semiquantitative multiplex lateral flow immunoassay (MLFIA) was strategically fabricated by employing ractopamine (RAC) and clenbuterol (CLE) as proof-of-concept. Avail of the environment-friendly, cost-effective, darker original color, and dual-signal readout capacity, FTAN was innovatively designed by chelating renewable bioresource TA as coupling element and Fe as active center to manufacture a multi-functional signal tag for the first time. Benefiting from the preferential protein adsorption ability of TA-Fe, the mussel-inspired nanozyme achieves satisfactory coupling efficiency and stability with antibodies. Importantly, the whole detection range was divided into several monitoring sections owing to the defined multiple detection limits (originated from on-demand outputs of colorimetric and catalytic signal) and broadened detection range, which contribute to satisfies dual-semiquantitative rapid on-site detection and various limit standards of same target in different regions. This research may contribute to the rational design of high-affinity nanozyme-based signal tags in LFIAs, the exploration of more renewable bioresource-derived nanozymes, and the extension of their applications in relevant sectors.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Yanbing Li,Zizhao Guo,Ya Qiu,Wenshen Yang,Lin Lang,Chuangzhi Wu,Chunhuan Luo,Xiuli Yin
Developing efficient, stable adsorbents for post-combustion CO 2 capture remains challenging, owing to competitive H 2 O adsorption, active component loss, and inactive byproduct formation. In this work, we report a one-step pyrolysis-activation strategy synthesizing herb-residue biochar co-anchored with K 2 CO 3 and K 2 FeO 4 (HPPF), enabling stable CO 2 capture under humid conditions via synergistic K Fe interactions. Compared with conventional post-impregnation methods, this approach enhances microporosity through molten-salt activation and reduces K vaporization by 56 % via Fe-O-K interfacial bonding, while disrupts K Ca interactions to prevent K 2 Ca(CO 3 ) 2 formation. The HPPF adsorbent exhibits a superior CO 2 capacity of 2.20 mmol g −1 at 60 °C under humid conditions (20 % CO 2 ), outperforming K 2 CO 3 -loaded biochar (HPC, 1.57 mmol g −1 ) and demonstrating a balanced H 2 O/CO 2 co-adsorption ratio (0.96, compared with 3.21 for HPC). In situ FTIR/XRD analyses reveal Fe accelerats the direct conversion from K 2 CO 3 to KHCO 3 , without formation of the hydrated intermediates. Furthermore, multi-model kinetic fitting confirmed Fe’s dual role in enhancing surface reactivity and modifying diffusion behavior. HPPF retained 99.1 % of its initial capacity after over nine adsorption-desorption cycles, demonstrating exceptional structural reversibility and cyclic durability. The estimated raw material cost (~$3.79 per kg CO 2 ) further supports its practical viability for scalable, low-cost carbon capture. This stable cycling capability of HPPF allows its incorporation into delayed feedback carbon cycles. In such systems, biochar accumulated during pyrolysis batch processes can progressively offset the CO 2 emissions generated by the biomass, offering a viable route for carbon-negative utilization.
✓ 已验证
产品关联
DOI
高影响因子