Inorganic Chemistry Frontiers
·
2021
·Vol. 8
·期 10
·2461-2467
·
IF 6.569
Yingchun Zhang,Changsheng Cao,Xin-Tao Wu,Qi-Long Zhu
Bismuth (Bi)-based nanomaterials are considered as promising electrocatalysts for the electrocatalytic CO2 reduction reaction (CO2RR), but it is still challenging to achieve high current density and selectivity in a wide potential window. Herein, Cu-decorated Bi/Bi2O3 nanofoam (P–Cu–BiNF) with a 3D porous network structure was prepared for the first time via a simple fast-reduction method. Characterizations indicate that the introduction of Cu can significantly regulate the microstructure and electronic states of Bi/Bi2O3. Consequently, the as-prepared P–Cu–BiNF exhibits excellent electrocatalytic performance toward the CO2RR. Remarkably, the faradaic efficiency of formate production can exceed 90% in a wide potential range from −0.78 to −1.08 V. Meanwhile, it can also deliver a high formate partial current density of up to 62.7 mA cm−2 at −1.18 V and long-term stability. This work provides a simple but effective way to synthesize advanced Bi-based materials with significantly improved electrocatalytic CO2RR performance.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2021
·
IF 13.084
Hong Li,Tian-Wen Jiang,Xianxian Qin,Jie Chen,Xian-Yin Ma,Kun Jiang,Xia-Guang Zhang,Wen-Bin Cai
Electrochemical CO2 reduction reaction (CO2RR) on Cu is often plagued by low selectivity and stability because of less-controlled preparation of electrocatalytic materials as well as insufficient understanding of the structure–performance relation. In this work, we develop a facile galvanic displacement protocol, involving an electropolished Cu sheet in a mixed Sb(III)–Cl– precursor solution, to form an Sb-modified Cu electrode that can selectively convert CO2 to CO with a Faradaic efficiency of ca. 82% and an undecayed reduction current over 12 h. Moreover, in situ infrared spectroscopy detects a relatively weak and red-shifted CO band on the Sb-modified Cu electrode as compared to that on the Cu electrode at potentials of CO2RR. Density functional theory calculations reveal that the Sb clusters on the Cu surface change the electronic structures of Cu as well as Sb and thus weaken the CO binding strength on Cu sites, consistent with the observed CO band feature and high CO selectivity. These findings may shed light on the rational design of high-selectivity CO2RR electrocatalysts by proper interfacial structure engineering.
✓ 已验证
产品关联
DOI
高影响因子
Journal of CO2 Utilization
·
2021
·
IF 7.132
Zekai Miao,Zhenkun Guo,Guofeng Qiu,Yixin Zhang,Jianjun Wu
Coal gasification fine slag (FS) is an inevitable by-product in the gasification process. The preparation of activated carbons (ACs) can realize the value-added utilization of FS. In this work, FS with about 70 % ash yield was prepared to ACs through KOH activation and then used to CO 2 capture. The residual carbon (RC) obtained from acid-treatment of FS was also to fabricate ACs. The ACs had interconnected macropores and micro-mesopores structure. The ACs were characterized using adsorption of nitrogen, SEM, TEM, Raman spectra, XRD, and TG. The optimized FS-based AC had a specific surface area of 1187 m 2 /g and a pore volume of 0.89 cm 3 /g. Furthermore, at the same ash yield, the surface area of FS-based ACs was larger than that of RC-based ACs. Experimental evidence presented that abundant metallic elements were leached using the impregnation method to mix KOH and raw material. Additionally, they could react with the carbon matrix and catalyzed the activation reactions to promote the development of pore structure. The ACs showed well CO 2 adsorption performance. FS2−800-60 exhibited a high CO 2 capture of 4.01 and 2.53 mmol/g at 0 and 25 °C. Additionally, the ACs showed a high adsorption rate that CO 2 adsorption uptake almost reached constant values within two minutes. All these results illustrate that ACs prepared from FS could be high efficiency and cost-effective adsorbent for CO 2 capture.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Nan Li,Zhi Wang,Ming Wang,Min Gao,Hongyu Wu,Song Zhao,Jixiao Wang
An effective and simple method named as Swelling-controlled Nanofiller Positioning (SNP) is proposed to construct unimpeded CO 2 transport nanochannels through a polyamide (PA) layer of thin-film nanocomposite (TFN) membranes for CO 2 separation. The SNP strategy can carefully pre-position the porous nanofiller (ZIF-8), providing gas transport channels, exactly at the support/solvent interface during interfacial polymerization (IP) process in order to keep ZIF-8 nanofillers through the selective layer after IP reaction. The pre-position was implemented via swelling the intermediate layer, polydimethylsiloxane (PDMS), in the organic solvent ahead of IP reaction. Swollen PDMS segments and the post-crosslinking reaction of unreacted PDMS oligomers in organic phase could restrain the mobility of ZIF-8 nanofillers and enhance the interfacial compatibility of nanofillers and PDMS. Then a PA layer with a tunable thickness was formed by IP reaction on the modified support with pre-positioned ZIF-8 nanoparticles . Additionally, we also investigated the deposition of ZIF-8 nanoparticles on swollen PDMS/PSf supports for further understanding the particle-size effects on the membrane structure and CO 2 separation performance. High permselectivty is achieved for TFN membranes with unimpeded CO 2 transport nanochannels in CO 2 /N 2 mixed-gas tests.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Fang Li,Xiaoyang Yue,Dainan Zhang,Jiajie Fan,Quanjun Xiang
The excitons are known to exist in graphitic carbon nitride (g-C 3 N 4 ), but the contribution of excitons to the photocatalytic process has received only sporadic attention. Targeted regulation of excitons dissociation into free charges is an effective measure to improve the utilization of carriers and enhance photocatalytic activity. Here we designed the ultra-thin g-C 3 N 4 nanosheets modified with rich N vacancies (Nv-rich-CN) through molecular self-assembly and molecular intercalation strategies. N vacancies can effectively dissociate excitons into free charges. The electron concentration of the Nv-rich-CN is 3.24 times that of bulk g-C 3 N 4 (CN). Benefiting from the enhanced carrier utilization, Nv-rich-CN showed superior activity for CO 2 photoreduction under visible light irradiation. Femtosecond transient absorption spectroscopy revealed a photophysical model of exciton dissociation. Theoretical calculation results explained that the essential reason for the vacancy to promote exciton dissociation may be that the lack of local order provided a driving force for exciton dissociation. Besides, N vacancies acted as active sites in the process of CO 2 reduction, promoting the adsorption and activation of CO 2 by the photocatalyst. In situ diffuse reflectance infrared Fourier transform spectroscopy revealed the change of intermediate products during the reduction of CO 2 . This work focuses on the contribution of excitons in the photocatalytic process and provides a novel idea for enhancing the carrier utilization of photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2021
·
IF 4.126
Xianglin Liu,Chao Zhang,Pengfei Tian,Minjie Xu,Chenxi Cao,Zixu Yang,Minghui Zhu,Jing Xu
The promotional effects of sodium on Fe5C2 catalysts for CO2 hydrogenation were systematically investigated by a synergistic combination of density functional theory (DFT) calculations and experimental methods. Na was found to markedly alter the electronic structure of Fe5C2 surface, leading to a reduction of the CO2 dissociation barrier from 0.45 to 0.08 eV and a decrease of the hydrogen binding energy. Moreover, Na lowers methane’s selectivity by hindering further hydrogenation of CH2 and enhances C–C coupling probability by promoting the chain growth of CH2. Additionally, Na strengthens alkenes’ selectivity by facilitating dehydrogenation of alkyls and boosting the desorption of alkenes. The theoretical findings were confirmed by experimental results. Adding Na to Fe5C2 catalyst was found to facilitate CO2 conversion and alkenes’ selectivity. Especially, the O/P (olefin/paraffin) ratio of C2–C4 hydrocarbons increases from 2.0 to 9.7 and the C5+ hydrocarbons’ selectivity increases from 12.6% to 51.8%. This study further deepens the understanding of the promotional effect of sodium on Fe-based catalysts for CO2 hydrogenation and enlightens the rational design of highly selective catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Journal of CO2 Utilization
·
2021
·
IF 7.132
Ke Wang,Yuxia Liu,Shiting Wang,Zhifeng Dai,Yubing Xiong
Synergistic effect between different functional groups is of significant influence on the activity of catalysts, especially for bi- or multi-component catalysts. Herein, a binary catalyst composing of metalloporphyrin (MPP) and phosphonium ionic liquid (PIL) is developed. The influence of substitution groups in both MPP and PIL on the cycloaddition addition of carbon dioxide and epoxides was comprehensively studied. The results demonstrated that the introduction of both electron-donating and electron-withdrawing functional groups in 5,10,15,20-tetraphenylporphyrin (TPP) framework was unfavorable to CO 2 transformation. Moreover, PIL cocatalyst with longer alkyl group could enhance the catalytic activity obviously. When Co 3+ was used as the metal active center, the binary catalyst system (TPP/Ph 3 PHexBr) could endow cyclic carbonate with a quantitative yield under the ambient condition of 50 °C and 1 atm CO 2 pressure. The turnover frequency (TOF) value could also be as high as 191.3 h –1 . Our founding thus provides an insight into the design of binary catalysts for efficient transformation of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2021
·
IF 5.062
Qun Li,Tingting Huang,Zichen Zhang,Meng Xiao,Hengjun Gai,Yu Zhou,Hongbing Song
Carbon dioxide (CO 2 ) emissions from the burning of fossil fuels have seriously aggravated the global greenhouse effect, leading to extreme environmental problems. Thus, the sufficient and effective use of CO 2 resources has always been an urgent issue. Herein, dication poly(ionic liquid)s (PILs)-supported palladium nanoparticles (Pd NPs) were designed to catalyze the hydrogenation of CO 2 to formic acid (FA) under mild conditions. The prepared catalysts were characterized by FT-IR, ICP, SEM, TEM, XPS, and other techniques. Results indicate that due to the strong metal-support interactions in the resultant catalysts, PILs are constructed by the IL units comprising dications and hydrophobic anions (bis(trifluoromethanesulfonyl)amide, Tf 2 N − ) that can uniformly disperse Pd NPs and enhance the catalytic hydrogenation of CO 2 to FA. The effect of various factors on CO 2 conversion is also investigated. Turnover frequency (TOF) can reach as high as 13.32 s −1 when using 1%Pd/PIL-2-Tf 2 N as a catalyst under the conditions of 80 °C, 1 h, 2 MPa pressure of CO 2 , and 0.88 M sodium borohydride aqueous solution, and the maximum amount of the obtained FA can reach up to 82% of the theoretical value. A possible mechanism of catalytic hydrogenation of CO 2 to FA is proposed according to the product analysis. This study highlights that PIL, as support, can promote the catalytic performance, and the resulting catalyst has potential application value for the CO 2 industry.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2021
·
IF 6.165
Shahid Hussain,Haifeng Dong,Shaojuan Zeng,Muhammad Umair Ahmad,Farooq Khurum Shehzad,Hui Wu,Yanqiang Zhang
Ionic liquids, which are designable and nonvolatile, have become a hot topic in the field of CO 2 separation from industrial gases. In order to utilize the nonvolatile and low heat capacity of ionic liquids, it is necessary to solve the problem of high viscosity of pure ionic liquids. In the present study, ether functionalized pyridinium ion [E 1 Py] + with good biodegradability and low viscosity was selected as cation. Ions containing cyano groups were used as anions, such as thiocyanate ion [SCN] - , dicyanamide ion [N(CN) 2 ] - , tricyanomethanide ion [C(CN) 3 ] - . Three ionic liquids with low viscosity were synthesized and characterized by 1 HNMR, 13 CNMR and FTIR. The physiochemical properties of ionic liquids such thermal decomposition temperature, density and viscosity were tested. The CO 2 absorption capacity was systematically studied by using intelligent gravimetric analyzer at the pressure range between 0 and 15 bars and the temperature range from 303.15 to 333.15 K. The results showed that the order of CO 2 absorption capacity of these three ionic liquids is [E 1 Py][C(CN) 3 ] > [E 1 Py] [N(CN) 2 ] > [E 1 Py][SCN], which showed that the solubility increased by increasing more cyano groups in ionic liquids. Thermodynamic properties such as enthalpy, entropy, and Gibbs free energy were also calculated for CO 2 absorption.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2021
·
IF 3.383
Lingyu Liu,Zihua Wang,Xue Zhong Wang
A modified sol-gel method employing alginic acid (H-ALG) granule as gelation media was developed for the synthesis of cobalt oxides in this investigation. High-temperature decomposition mechanism of alginic acid was studied using simultaneous thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC), infrared spectroscopy (IR) and mass spectrometry (MS). The main emissions were water, carbon dioxide and carbon monoxide with − 7444.8 J/g heat flow measured at temperatures between 200 and 500 °C. In contrast, the energy released using the cobalt alginate (Co-ALG) sample was determined as − 8296.2 J/g at this temperature range. The oxidation states of the Co-ALG sample gradually changed, resulting in a conversion from Co 3 O 4 to CoO at high temperatures. According to the powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis, single phase cubic Co 3 O 4 were produced with particle size ~25 nm after calcination at 500 °C for 2 h. The ability of H-ALG to attract metal ions, such as Co, could be considered as a low cost and simple route for a large scale production of high purity metal oxides at significantly low temperatures due to the tremendous amount of energy released during the combustion reaction of the alginate structure.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2021
·Vol. 13
·期 19
·3384
·
IF 4.329
Tianping Zhang,Shun Yao,Lu Wang,Weijun Zhen,Ling Zhao
Both vulcanization reaction and CO2plasticization play key roles in the temperature rise foaming process of silicone rubber. The chosen methyl-vinyl silicone rubber system with a pre-vulcanization degree of 36% had proper crosslinked networks, which not only could ensure enough polymer matrix strength to avoid bubble rupture but also had enough dissolved CO2content in silicone rubber for induced bubble nucleation. The CO2diffusion and further vulcanization reaction occur simultaneously in the CO2plasticized polymer during bubble nucleation and growth. The dissolved CO2in the pre-vulcanized silicone rubber caused a temperature delay to start while accelerating further vulcanization reactions, but the lower viscoelasticity caused by either CO2plasticization or fewer crosslinking networks was still the dominating factor for larger cell formation. There was a sudden increase in elastic modulus and complex viscosity for pre-vulcanized silicone rubbers at higher temperature because of the occurrence of further vulcanization, but CO2plasticization reduced the scope of change of rheological properties, and the loss factor was close to 1 around 170 °C, which is corresponding to the optimum foaming temperature. The foamed silicone rubber had a higher cell density and smaller cell size at a higher temperature rising rate, which is due to higher CO2supersaturation and faster vulcanization reaction. These results provide some insight into the coupling mode and effect of CO2plasticization and vulcanization for regulating cell structure in foaming silicone rubber process.Keywords:methyl-vinyl silicone rubber;temperature rise foaming process;vulcanization reaction;CO2plasticization;rheological property;cell morphology
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2021
·
IF 3.764
Ke Wang,Xianhe Li,Nan Wang,Quanhao Shen,Maochang Liu,Jiancheng Zhou,Naixu Li
Solar photocatalysis has long relied on the rational design of semiconductor photocatalysts. Herein, a ternary meso-TiO2@ZnIn2S4/Ti3C2 MXene photocatalyst is prepared and demonstrated with a core–shell structure accompanied by few-layered Ti3C2 Mxene on the ZnIn2S4 shell. The success of the synthesis depends on a two-step method consisting of hydrothermal and electrostatic self-assembly procedures. The ternary heterojunction exhibits a good behavior for photocatalytic CO2 reduction. A mechanism study of the photocatalytic reaction indicates that the photogenerated charges transfer in a Z-scheme pathway. Moreover, the construction of the Schottky junction between metallic Ti3C2 and TiO2@ZnIn2S4 is extremely effective for the reduction reaction. Consequently, the photocatalytic rates toward CO and CH4 production are up to 30.5 and 34.0 μmol/g within 3 h of illumination by simulated sunlight, respectively, while the CH4 selectivity reaches 52.7%. This work provides a good strategy to achieve highly efficient photocatalytic CO2 reduction.
✓ 已验证
产品关联
DOI
高影响因子