文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4177至4188个,产品总数8,185个

切换升序
LIGHT
CHEMICAL ENGINEERING JOURNAL · 2020 · IF 10.652

High-performance of Cu-TiO2 for photocatalytic oxidation of formaldehyde under visible light and the mechanism study

Min Chen,Honghong Wang,Xueyan Chen,Fei Wang,Xiaoxiao Qin,Changbin Zhang,Hong He

Photocatalysis is regarded as a promising method for indoor formaldehyde (HCHO) removal, and there remains a strong demand for the development of highly efficient photocatalysts for HCHO oxidation under visible light. Herein, by grafting nano CuO x clusters onto TiO 2 , the higher performance is achieved over Cu-TiO 2 for the photocatalytic oxidation of HCHO under visible light compared with the typical photocatalysts N-TiO 2 and g-C 3 N 4 . It is found that the presence of water greatly promotes the activity of HCHO oxidation on Cu-TiO 2 . The characterization results indicate that the CuO x clusters on TiO 2 exhibit high redox reversibility between Cu (II) and Cu (I) and greatly facilitate the migration of electrons. The mechanism of photocatalytic oxidation of HCHO was explored by using in situ DRIFTS measurements and DFT calculations. It is shown that HCHO is firstly oxidized to dioxymethylene (DOM), and then DOM is transformed into formate species under visible light irradiation. DFT calculations results indicate that the OH species are responsible for surface formate decomposition, which is the rate-determining step, while O 2 − radical is not active in formate decomposition. Our findings improve the understanding on the photocatalytic oxidation of HCHO, and the Cu-TiO 2 catalyst is a promising candidate for practical application in indoor air purification.

CAS / MDL: 13463-67-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2020 ·Vol. 31 ·期 6 ·4822-4835 · IF 2.22

Fabrication of Z-scheme Bi5O7I/MIL-53(Fe) hybrid with improved photocatalytic performance under visible light irradiation

Zhou Nan,Tan Junjie,Li Xi,Wang Lu,Jin Chenglong,Chen Ming,Yu Zhengsong,Liang Yani,Qiu Zhidong,Li Wenlong,Dong Yulin,Xie Zhizhong,Lin Yawei,Qu Deyu,Zhang Chaocan

A series of Bi 5 O 7 I/MIL-53(Fe) (BOI/MIL- w ) composites were successfully prepared by a facile in-situ solvothermal approach. The matched energy bands enabled Bi 5 O 7 I and MIL-53(Fe) to form a Z-scheme heterojunction which resulted in an efficient separation of the photo-induced electron–hole pairs. The photocatalytic activity of BOI/MIL- w was evaluated by the degradation of Rhodamine B (RhB) in water under the visible light irradiation. Compared with Bi 5 O 7 I, photocatalytic performances of BOI/MIL- w notably boosted. When the content of added MIL-53(Fe) was 3 wt%, BOI/MIL-3 presented the highest activity with a degradation efficiency of 99.7% only after 60 min of irradiation. The reaction rate constant k could reach 0.0992 min −1 which was nearly 12.6 times as high as that of Bi 5 O 7 I. Moreover, BOI/MIL- w had a good stability and reusability, which could ensure its practical application. Trapping experiments confirmed that h + and ·O 2 − were the dominant active species during the photocatalytic process, and further demonstrated the formation of the Z-scheme heterojunction facilitated the photocatalytic performance of BOI/MIL- w .

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2020 · IF 3.573

Light Color Dihydroxybenzophenone Grafted Lignin with High UVA/UVB Absorbance Ratio for Efficient and Safe Natural Sunscreen

Ying Wu,Yong Qian,Aicheng Zhang,Hongming Lou,Dongjie Yang,Xueqing Qiu

To solve the poor absorbance on ultraviolet A (UVA) radiations and dark color, alkali lignin (AL) was modified via atom transfer radical polymerization (ATRP) grafting of 2-4-benzoyl-3-hydroxyphenyl acrylate (BHA). The color of AL was whitened 86% and the UVA/UVB absorbance ratio of AL-g-BHA improved to 1.2, while the reported highest value was 0.9. The excellent UV-blocking performance of AL-g-BHA was demonstrated in sunscreen. Sun protection factor (SPF) value of the sunscreen containing 10 wt % of optimal AL-g-BHA reached 59. Nanoscale AL-g-BHA normal and reverse micelles (LBNM and LBRM) were fabricated to investigate the effect of microstructure on the sunscreen performance. When BHA chains were packed inside, the SPF value of sunscreen containing 10 wt % of LBNM decreased to 28. In contrast, the SPF value of sunscreen containing 10 wt % of LBRM with BHA chains distributing on the surface was up to 244. Both AL-g-BHA and corresponding micelles exhibited good biocompatibility.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2020 · IF 10.652

Biomimic FeS2 nanodrug with hypothermal photothermal effect by clinical approved NIR-Ⅱ light for augmented chemodynamic therapy

Dejun She,Shaojun Peng,Li Liu,Huihui Huang,Yingyan Zheng,Yiping Lu,Daoying Geng,Bo Yin

Hypothermal photothermal therapy (HPTT) employs hyperthermia (<45 °C) to destroy tumor cells with negligible side effects to the surrounding normal tissues. Despite extensive studies, the clinical translation of HPTT is severely hindered, owing to the discounted therapeutic effect and maximum permissible power of near-infrared (NIR) laser by food and drug administration (FDA). Herein, we report a rational design of red blood cell membranes (RBCs) coated FeS 2 (FeS 2 @RBCs) with strong absorption at NIR-Ⅱ window for effective HPTT augmented chemodynamic therapy (CDT). FeS 2 @RBCs exhibits prolonged blood circulation and negligible immune response, leading to improved tumor accumulation for enhanced HPTT. Furthermore, the CDT effect of FeS 2 @RBCs is significantly augmented by the temperature elevation in the tumor region, which leads to the synergetic HPTT and CDT. Lipidomics analysis reveals that the damage of tumor cells by CDT is via the lipid peroxidation. In addition, FeS 2 @RBCs exhibits self-enhanced magnetic resonance imaging after reacting with H 2 O 2 in tumor region for imaging-guided laser irradiation. Thus, FeS 2 @RBCs achieves remarkable inhibition of subcutaneous 4T1 breast tumor growth without obvious side effects by a 1064 nm laser irradiation of 1.0 W/cm 2 (FDA approved power density). Overall, this work provides a HPTT augmented CDT strategy for effective cancer therapy with a clinical approved laser power, which may pave the way for the clinical application of HPTT augmented CDT in the future.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2020 · IF 3.28

Synthesis and photoluminescence properties of a new blue-light-excitable red phosphor Ca2LaTaO6:Eu3+ for white LEDs

Zongjie Zhang,Liangling Sun,Balaji Devakumar,G. Annadurai,Jia Liang,Shaoying Wang,Qi Sun,Xiaoyong Huang

In this paper, a series of Eu 3+ -activated double-perovskite Ca 2 LaTaO 6 (abbreviated as CLT: x Eu 3+ ; x  = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, and 0.8) red-emitting phosphors have been successfully synthesized via the conventional high-temperature solid-state reaction method. These samples were characterized by X-ray diffraction, Rietveld refinement , field-emission scanning electron microscope , elemental mapping, energy-dispersive spectrum, room-temperature photoluminescence , decay lifetimes, quantum efficiency, CIE color coordinates, and temperature-dependent emission spectra . Interestingly, under blue excitation into the 7 F 0 → 5 D 2 transition of Eu 3+ at 466 nm, the CLT: x Eu 3+ phosphors could emit bright red light corresponding to the 5 D 0 → 7 F J (J = 1, 2, 3, 4) transitions. Their luminescence properties have been investigated as a function of the Eu 3+ ions concentration . It was found that the CLT:0.4Eu 3+ sample exhibited the strongest emission intensity, and the concentration quenching effect was caused by the dipole-dipole interaction among Eu 3+ activators. Impressively, the emission intensity of the as-prepared CLT:0.4Eu 3+ phosphors was about 4.3 times higher than the commercial Y 2 O 3 :Eu 3+ red phosphors. Moreover, the CLT:0.4Eu 3+ sample had excellent CIE color coordinates of (0.665, 0.334) and supereminent color purity of 95.3%. Notably, the study on temperature-dependent emission spectra of the CLT:0.4Eu 3+ sample revealed its good thermal stability and color stability at high temperatures. These excellent photoluminescence properties of CLT:0.4Eu 3+ phosphors indicated their promising application potential in white light-emitting diodes as blue-light-excitable red phosphors.

CAS / MDL: 1314-61-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

Visible-light-driven H2O2 production from O2 reduction with nitrogen vacancy-rich and porous graphitic carbon nitride

Yanbin Wang,Di Meng,Xu Zhao

Visible-light-driven H 2 O 2 production from O 2 reduction is an eco-friendly strategy and attracts increasing attentions. In this study, KOH modified graphitic carbon nitrides (CNKx) were constructed through the thermolysis of melamine-cyanuric acid supramolecular-complex in the presence of KOH. The BET specific surface area of CNK 0.2 with porous structure was 92 m 2  g −1 . The photocatalyst was characterized by XPS, ESR and element analysis and the analysis suggested that nitrogen vacancy was created in the framework of g-C 3 N 4 . Photoluminescence (PL) spectra indicated that the recombination of photogenerated electrons and holes was efficiently suppressed. ζ-potential revealed that more negative charge on the surface of CNK 0.2 , which promoted the adsorption of O 2 and accelerated the photocatalytic H 2 O 2 production. ESR experimental and radical quenching results illustrated that superoxide radical (O 2 - ) was the primary intermediate during the O 2 reduction process, suggesting the O 2 reduction pathway by CNK 0.2 was the sequential two-step single-electron reduction.

CAS / MDL: 3317-61-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2020 · IF 7.489

Construction of PDDA functionalized black phosphorus nanosheets/BiOI Z-scheme photocatalyst with enhanced visible light photocatalytic activity

Ruisen Jing,Junshan Yang,Shutao Li,Shifeng Zhao,Pengfei Wang,Yunyan Liu,Aiju Liu,Zilin Meng,Hongwei Huang,Zhilei Zhang,Qian Zhang

The use of black phosphorus (BP) nanosheets has attracted much attention in the area of photocatalysis owing to the thickness-tunable bandgap and high carrier mobility. In order to improve the stability of BP nanosheets, poly dimethyldiallyl ammonium chloride (PDDA) is used to passivate the BP nanosheets and change its surface properties. The present study concerns the development of a facile electrostatic assembly method for the construction of a Z-scheme system consisting of PDDA-functionalized BP nanosheets and layered BiOI in order to enhance visible light adsorption and promote electron-hole separation. The morphology, structure and photoelectrochemical properties of the composites are thoroughly characterized and the photocatalytic performances of all the samples were assessed under visible light irradiation. The 5-F-BP/BiOI exhibits excellent photocatalytic activity with removal efficiencies of 97.6% and 90.0% for methylene blue (MB) and tetracycline (TC), respectively. Superoxide radicals (·O 2 – ) were found to be the main organic decomposition products according to species trapping experiments. The photocatalyst presents favorable stability after three catalytic cycles. This study provides new insights into the design of highly efficient Z-scheme photocatalysts based on functionalized BP nanosheets in order to meet environmental demands.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2020 · IF 6.182

Cu2O-BiOI isotype (p-p) heterojunction: Boosted visible-light-driven photoelectrochemical activity for non-enzymatic H2O2 sensing

Yi Zhang,Qi Wang,Dongming Liu,Qian Wang,Tong Li,Zhou Wang

A novel isotype (p-p) heterojunction, on the basis of Cu 2 O coupled with BiOI, has been designed and synthesized via a facile two-step electro-deposition approach at room temperature. The morphology, phase compositions and chemical bonding state were verified by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction measurements (XRD) and X-ray photoelectron spectra (XPS). The optimized Cu 2 O/BiOI hybrid electrode exhibited boosted photoelectrochemical (PEC) H 2 O 2 non-enzymatic sensing performance under visible light illumination, with a phenomenally broad linear range (1.99 µM ~ 17.54 mM), a high sensitivity of 213.87 µA mM −1  cm −2 , as well as a low detection limit of 0.44 µM (S/N = 3). Additionally, the sensor presented satisfying selectivity, repeatability, stability and its feasibility in real samples was corroborated. The photoelectrochemical sensing mechanism was clarified in the view of band structure and p-p heterojunction. Our work would enlighten the perspective research on the application of isotype heterojunction in PEC bio-sensing and provide a promising non-enzymatic biosensor platform for effective detection of H 2 O 2 in food, biomedical and environment analysis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHINESE CHEMICAL LETTERS · 2020 · IF 4.632

Visible light induced efficient activation of persulfate by a carbon quantum dots (CQDs) modified γ-Fe2O3 catalyst

Yongjie Li,Wei Xiang,Tao Zhou,Mingjie Huang,Chen Wang,Xiaohui Wu,Juan Mao,Penghua Wang

In this study, a carbon quantum dots modified maghemite catalyst (CQDs@ γ -Fe 2 O 3 ) has been synthesized by a one-step solvothermal method for efficient persulfate (PDS) activation under visible light irradiation. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy (UV–vis DRS) characterization indicated that the formation of heterojunction structure between CQDs and γ -Fe 2 O 3 effectively reduced the catalyst band gap ( E g ), favoring the separation rate of electrons and holes, leading to remarkable efficient sulfamethoxazole (SMX) degradation as compared to the dark-CQDs@ γ -Fe 2 O 3 /PDS and vis- γ -Fe 2 O 3 /PDS systems. The evolution of dissolved irons also demonstrated that CQDs could accelerate the in-situ reduction of surface-bounded Fe 3+ . Electron paramagnetic resonance (EPR) and radical scavenging experiments demonstrated that both OH and SO 4 − were generated in the reaction system, while OH was relatively more dominant than SO 4 − for SMX degradation. Finally, the reaction mechanism in the vis-CQDs@ γ -Fe 2 O 3 /PDS system was proposed involving an effective and accelerated heterogeneous-homogeneous iron cycle. CQDs would enrich the photo-generated electrons from γ -Fe 2 O 3 , causing efficient interfacial generation of surface-bond Fe 2+ and reduction of adsorbed Fe 3+ . This visible light induced iron cycle would eventually lead to effective activation of PDS as well as the efficient degradation of SMX.

CAS / MDL: 1309-37-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

Visible-light-driven photo-Fenton reactions using Zn1-1.5xFexS/g-C3N4 photocatalyst: Degradation kinetics and mechanisms analysis

Qiao Wang,Peng Wang,Peng Xu,Yang Li,Jiajun Duan,Guangshan Zhang,Limin Hu,Xiaojing Wang,Wen Zhang

The visible-light responsive hybrid catalysts (Zn 0.94 Fe 0.04 S/g-C 3 N 4 or ZCN) were synthesized by a rapid microwave hydrothermal method. Our results showed that the deposition of Fe-doped ZnS onto g-C 3 N 4 sheets prevented the aggregation of Zn 0.94 Fe 0.04 S and increased the surface area for mass transfer and light absorption. The highest degradation rate of p -nitrophenol (PNP) was 96.0% and the total organic carbon removal rate was 55.4% after 60-min simulated solar light irradiation on ZCN with Fe doping and g-C 3 N 4 loading ratios of 0.04 and 0.20, respectively. Hydroxyl radical played a dominant role in PNP degradation, which was primarily attributed to the photo-Fenton reactions. The PNP degradation pathway involved denitration and hydroxylation reactions according to the Density Function Theory calculations and HPLC-MS/MS results. The QSAR analysis indicated that the toxicity of most intermediates was lower than PNP. This study develops novel materials with superior photocatalytic activity for elimination of refractory organic pollutants in wastewater.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2021 · IF 3.599

Preparation of cyanine dye sensitized upconversion luminescent nanoprobe and hypochlorous acid detection by light-emitting energy transfer

Meng Wang,Ruo Mi,Lun Wang,Hongqi Chen

A novel light-emitting energy transfer (ET) system was designed to detect hypochlorous acid . NaGdF 4 :Yb,Er@NaGdF 4 :Yb, Nd upconversion nanoparticles (UCNPs) were sensitized by cyanine dye and formed micelles with the amphiphilic polymer DSPE-PEG-COOH to produce a hydrophilic UCNPs-Dye@DSPE-PEG-COOH nanoprobe. In the presence of hypochlorous acid, the structure of cyanine dyes was destroyed, thus the energy transfer from cyanine dye to UCNPs was inhibited, which results in the luminescent intensity of the composite nanoprobe decreased. Under the optimal conditions, the linear detection range for determination of hypochlorous acid is 0.040–20 μM, and the detection limitation is 0.010 μM. In addition, the method can be utilized to detect hypochlorous acid in serum samples with satisfactory results.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2021 · IF 5.165

Synthesis of a Bi3+-Doped Cs2HfCl6 Double Perovskite with Highly Efficient Blue Light Emission at Room Temperature

Ruxin Liu,Wenjun Zhang,Wenjing Liu,Guojing Li

Lead-free perovskites have been widely studied due to their environmental friendliness and high stability. In this study, Bi3+-doped Cs2HfCl6 has been synthesized at room temperature. Different from the emission of the Cs2HfCl6 host (452 nm), Bi3+:Cs2HfCl6 can produce a bright blue emission at an excitation wavelength of 350 nm, which is derived from the 3P1 → 1S0 transition of Bi ions and accompanied by the properties of self-trapped excitons. Moreover, 7%Bi3+:Cs2HfCl6 shows excellent stability with the photoluminescence quantum yield reaching up to 69.08%. Meanwhile, a light-emitting diode that is close to pure white light has been fabricated by using 7%Bi3+:Cs2HfCl6, which has a high color rendering index of 92.5. These results show that Bi3+:Cs2HfCl6 would be a potential candidate in the field of inorganic luminescent materials.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。