Advanced Materials Interfaces
·
2020
·Vol. 7
·期 7
·1901815
·
IF 4.948
Minglong Yang,Qiang Wei,Jianjun Li,Yao Wang,Hongfei Guo,Liya Gao,Li Huang,Xiaodong He,Yibin Li,Ye Yuan
Inspired by the traditional Chinese “pancake-making” method, the efficient electromagnetic interferences (EMI) shielding composite carbon films are conveniently obtained by assembling graphene oxide (GO) sheets, carbon nanotubes (CNTs), and Co/C nanocomposites into a laminated “nacre-like” structure. The developed composite carbon films are characterized by a shielding effectiveness (SE) up to ≈51 dB in X band with a small thickness of ≈34.3 µm. Moreover, the composite carbon film shows favorable flexibility and the SE values almost keep a constant after repeatedly bending test. These results demonstrate a promising approach to simply fabricate a flexible and highly efficient EMI shielding material.
研究领域:
材料科学
·
纳米科技
·
复合材料
·
电磁功能材料
·
柔性电子学
✓ 已验证
DOI
高影响因子
ADVANCED MATERIALS
·
2012
·Vol. 24
·期 24
·3201-3204
·
IF 13.877
Shaohua Liu,Haiping Jia,Lu Han,Jiulin Wang,Pengfei Gao,Dongdong Xu,Jun Yang,Shunai Che
Graphical Hierarchical porous TiO 2 –B with thin nanosheets is successfully synthesized. TiO 2 –B polymorph ensures fast insertion of Li-ion due to its pseudocapacitive mechanism. The thin nanosheet walls with porous structure allow exposure to electrolytes for facile ionic transport and interfacial reaction. The joint advantages endow this material with high reversible capacity, excellent cycling performance, and superior rate capability.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机非金属材料
·
电极材料
·
锂离子电池
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Xiaowei Kong,Xiaoliang Zhou,Yu Tian,Xiaoyan Wu,Jun Zhang,Wei Zuo
Development of cost-effective and efficient electrochemical catalysts for the fuel cells electrode is of prime importance to emerging renewable energy technologies . Here, we report for the first time the novel La 0.9 Ca 0.1 Fe 0.9 Nb 0.1 O 3−δ (LCFNb) perovskite with good potentiality for the electrode material of the symmetrical solid oxide fuel cells (SSOFC). The Sc 0.2 Zr 0.8 O 2−δ (SSZ) electrolyte supported symmetrical cells with impregnated LCFNb and LCFNb/SDC (Ce 0.8 Sm 0.2 O 2−δ ) electrodes achieve relatively high power outputs with maximum power densities (MPDs) reaching up to 392 and 528.6 mW cm −2 at 850 °C in dry H 2 , respectively, indicating the excellent electro-catalytic activity of LCFNb towards both hydrogen oxidation and oxygen reduction. Besides, the MPDs of the symmetrical cells with LCFNb/SDC composite electrodes in CO and syngas (CO: H 2 = 1:1) are almost identical to those in H 2 , implying that LCFNb material has similar catalytic activities to carbon monoxide compared with hydrogen. High durability in both H 2 , CO and syngas during the short term stability tests for 50 h are also obtained, showing desirable structure stability, and carbon deposition resistance of LCFNb based electrodes. The present results indicate that the LCFNb perovskite with remarkable cell performance is a promising electrode material for symmetrical SOFCs.
研究领域:
材料科学
·
电化学
·
能源材料
·
燃料电池
·
催化化学
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Hongyuan Qin,Jiawei Huang,Xueli Zhang,Ling Yu,Yang Yu
In this study, lanthanum hydroxide adsorbent was synthesized through a simple hydrothermal method and applied for removing phosphate from water. The optimal adsorbent was obtained at the La/OH molar ratio of 4:1. The adsorbent showed rapid adsorption of phosphate within the first 4 h in which approximately 84% of the equilibrium adsorption capacity can be achieved. The phosphate uptake was highly dependent on solution pH. The better fit of the Langmuir isotherm model to experimental data indicated that the monolayer adsorption occurred and the maximum adsorption capacity of 193.9 mg/g was accomplished at pH 7.0. The presence of fluoride could significantly retard the uptake of phosphate. X-ray photoelectron spectroscopy analysis indicated that hydroxyl groups on the adsorbent surface played the most key role in the adsorption. The phosphate ions were adsorbed on the adsorbent through the formation of inner-sphere complexes.
研究领域:
环境化学
·
纳米材料科学
·
水污染控制
·
表面化学
·
吸附科学
✓ 已验证
DOI
高影响因子
Energy Technology
·
2020
·Vol. 8
·期 10
·2000606
·
IF 3.404
Yu Wang,Nachuan Yang,Yi Shuai,Kanghua Chen
Na 3 PS 4 -based materials, which have relatively high conductivities, make promising Na-ion solid electrolytes for realizing all-solid-state sodium batteries. Herein, Na 2.9375 PS 3.9375 Cl 0.0625 solid electrolytes’ power is prepared by a mechanical ball milling process and subsequent heat treatment process using low-cost Na, NaCl, P 2 S 5 , and S as raw materials. In addition, its electrical conductivity and electrochemical performance by compounding with polyethylene oxide–NaClO 4 are studied. The results show that Na 2.9375 PS 3.9375 Cl 0.0625 solid electrolyte heated at 550 °C with polyethylene oxide–NaClO 4 exhibits Na-ion conductivity of 8.75 × 10 −4 S cm −1 . The pragmatic and cost-effective raw materials grant the solid electrolyte with high-performance and higher practical value.
研究领域:
材料科学
·
电化学
·
能源存储
·
固体离子学
·
无机非金属材料
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Na Zhang,Yu Liu,Jianhua Yang,Shuming Zhang,Shiyang He
The Si-TiO 2 based composites with a nanosized multi-sphere structure have been developed as novel anode for lithium ion cells . The Si spheres are highly embedded within the titanium dioxide nanoparticles via a hydrothermal synthesis route. The as-proposed sphere-stack like morphology achieves a superior cycling stability for lithium storage. The existence of TiO 2 is in favor for the mechanical stability of Si during charge-discharge and conversely reduces the obtained capacity of the composite. Furthermore, the Si/TiO 2 composite is coated by pyrolysized carbon. The reversible discharge capacity of the Si/TiO 2 /C composite reaches to 976 mAh g −1 after 50 cycles. Carbon coating is beneficial for the rate capability of the Si/TiO 2 based composite.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机非金属材料
✓ 已验证
DOI
高影响因子
Results in Physics
·
2020
·
IF 4.019
Zhengwei Xiong,Jiang Yang,Zhipeng Gao,Qiang Yang,Deli Shi
As a typical supercapacitor electrode material, the reported Mo-N compounds mostly own one part of outstanding electrochemical properties (specific capacitance (C sp ), voltage window and cycling stability), and the well integration with three aspects was rare. Here using a novel MoO 3 precursor with ultra-long nanobelts (NBs) and stable orthorhombic crystal structure, we prepared unique Mo 3 N 2 NBs, which inherited the morphology and structure of the precursor greatly. Compared with other Mo-N compounds, the Mo 3 N 2 NBs both possessed the high C sp (220.3 F/g at 0.4 A/g), great cycling stability (98.3% C sp retention after 1500 cycles) and wide voltage window (0.95 V) due to the improved morphology, stable structure and excellent conductivity.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
EUROPEAN POLYMER JOURNAL
·
2013
·Vol. 49
·期 6
·1731-1741
·
IF 2.562
Wenwen Yu,Dezhi Zhang,Miao Du,Qiang Zheng
A series of novel polyurethane (PU)/epoxy resin (EP) graft interpenetrating polymer network (IPN) composites with graded length side chains were prepared from toluene diisocyanate (TDI), polytetrahydrofuran glycol (PTMG), EP, trimethylolpropane (TMP), and diol chain extenders. The effects of the side chain lengths, content, and groups on the damping properties and mechanical properties were investigated. Two damping peaks were observed in the PU/EP IPN system, indicating that the peak damping factor (tan δ ) increased with increased side chain length at low temperatures. The introduction of an apolar side chain slightly narrowed the damping range. However, the side chain carrying polar groups broadened the damping temperature range. The strong H-bond interaction between the ester group of side chain and the N H of hard segments in PU was believed to favor microphase separation to form a larger-sized domain and induce the appearance of the relaxation peak at high temperatures. Consequently, the effective damping temperature range was broadened. The side chain content tethered in the hard segment remarkably influenced the damping properties of PU/EP IPNs both at low and high temperatures. The width and intensity of the tan δ peaks of PU/EP IPNs increased with increased side chain content. The mechanical properties (tensile strength and elongation at break) were significantly affected by the side chain content. Thus, an important method of improving the mechanical damping of elastomers by controlling the side chain molecular structure was established.
研究领域:
高分子材料科学
·
功能高分子
·
阻尼材料
·
复合材料
·
聚合物共混物
·
材料力学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·Vol. 51
·期 5
·6587-6598
·
IF 5.1
Bo Li,Yigao Chen,Shaopeng Wang
A (ZrC/SiC) 35 multilayer alternating coating with 500∼700 nm sublayers thickness and 70 interfaces was deposited on sharp leading edge C/C composites by continuous CVD method. Its mechanical property and ablation resistance were assessed by scratch test and oxy-acetylene flame respectively and compared with ZrC monolayered coating. The (ZrC/SiC) 35 multilayer alternating coating exhibited a high bonding strength via the regulation of sub-micro alternating stress field and the inhibition of crack propagation by 70 interfaces, showing a high critical load L C3 of 22.521 N, which was higher than that of ZrC monolayered coating of 5.688 N. Furthermore, the coating revealed excellent ablation resistance evidenced by its intact oxide layer, and the mass and linear ablation rates were only 0.17 mg/s and 0.87 μm/s respectively. The layer-by-layer oxidation behavior allowed the advantages of ZrC and SiC sublayers to be fully utilized, thus maintaining the layered oxide structure. Furthermore, the total 35 layers of thin ZrO 2 layers improved the fault tolerance ability of coating in harsh ablative environments.
研究领域:
材料科学
·
表面工程
·
高温防护涂层
·
复合材料
·
力学性能
·
热防护系统
✓ 已验证
DOI
高影响因子
ORGANIC ELECTRONICS
·
2019
·
IF 3.495
Xiangli Gao,Gaoyi Han,Yunzhen Chang,Ying Zhang,Honggang Li
To enhance the reduced graphene oxide hydrogels' capacitive performance, many modifiers are used to add doped element into the materials and improve the structure. The isomers of aminophenol which contain amino and hydroxyl groups on the benzene ring are employed as structure regulator and modifier to synthesize high-performance reduced graphene oxide hydrogels. The influences of preparation conditions including ratios of graphene oxide to aminophenol isomers, temperature, reaction times on the samples’ structure and properties have been investigated. The results show that the oligomer of o-aminophenol is formed on reduced graphene oxide sheets while the molecules of p, m-aminophenol are bound to the sheets; and that the hydrogel prepared in the presence of p-aminophenol has larger specific surface area, total pore volume , specific capacitance and good rate capability (74.0% of 427.0 F g −1 retains at 100 mV s −1 ) than other. The cells assembled by the optimized hydrogels exhibit the energy density of 14.07 Wh kg −1 at power density of 124.3 W kg −1 , and 4.96 Wh kg −1 at 6.78 kW kg −1 . Furthermore, 92.2% of initial capacitance can be retained after 20,000 cycles for the cells assembled by the optimal hydrogel. This kind of material may be found its use in energy storage field.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
高分子化学
·
表面科学
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2020
·
IF 7.183
Yanwei Sun,Chunshan Song,Xinwen Guo,Sungwon Hong,Jungkyu Choi,Yi Liu
Metal-organic framework (MOF) membranes have received increasing attention due to their unprecedented potential for energy-efficient gas separation. Compared with other MOF materials (like ZIF), fabrication and microstructural manipulation of high-performance Ti-MOF-based membranes, although being very attractive due to their excellent chemical and thermal stability, remained relatively less investigated due to the limitations of available titanium sources and heating modes. In this study, different Ti sources (TPOT, TiS 2 , and MXene) and heating modes (conventional heating, multi-mode microwave heating, and single-mode microwave heating) were examined for the preparation of NH 2 -MIL-125 membranes showing diverse microstructures and gas separation performances. The present work revealed that for the first time, MXene , the new two-dimensional Ti carbide , could be used as Ti source for synthesizing MOF membranes. The best performing NH 2 -MIL-125 membranes, which were obtained with TiS 2 as the metal source under single-mode microwave heating, exhibited the highest H 2 /CO 2 selectivity (ca. 17.2) as well as considerable H 2 permeance (1.7 × 10 −7 mol m −2 s −1 Pa −1 ), owing to an enhanced non-thermal effect of single-mode microwave heating and balanced dissolution rate of TiS 2 .
研究领域:
材料科学
·
膜分离技术
·
化学工程
·
纳米材料
·
气体分离
·
可持续能源
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2024
·
IF 4.8
Guojun Lv,Xuyang Zou,Yan Chen,Qing Zhang,Xubin Zhang,Fumin Wang
The successful one-pot synthesis of MCM-41/MFI composite is mainly concentrated on the trivalent heteroatom of Al 3+ and Fe 3+ , however there are almost no reports about the one-pot synthesis of Ti-MCM-41/MFI composite. In this work, we reported the one-pot synthesis of Ti-MCM-41/MFI composite with a temperature-gradient hydrothermal strategy using hexadecyl trimethylammonium bromide CTAB and silicalite-1 seed as structure directing agents as well as ammonia solution as alkali source, and its application as heterogeneous catalyst in the cyclohexene epoxidation reactions. The impact of Si/Ti molar ratio and ammonia dosage as well as CTAB amount on the formation and property of Ti-MCM-41/MFI composite were systematically investigated. In addition, a possible partial transformation mechanism of Ti-MCM-41/MFI composite sample was proposed. The synthesized Ti-HMZ-50-N3.77-Se0.05 sample with ordered mesoporous structure and high content of framework titanium active centers revealed the eminent cyclohexene epoxidation performance, achieving a 32.51 % of cyclohexene conversion and a 61.27 % selectivity of cyclohexene oxide within 5 h of reaction.
研究领域:
催化化学
·
材料化学
·
纳米材料
·
多相催化
·
绿色化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）