JOURNAL OF HAZARDOUS MATERIALS
·
2023
·
IF 13.6
Jingxuan Zhao,Hongxu Liu,Peng Xue,Yuchao Qi,Ziwei Lv,Ruijia Wang,Yucheng Wang,Shulin Sun
In the process of removing dye wastewater, the membrane surface is susceptible to contamination, resulting in reduced performance and limited dye separation efficiency. A single hydrophilic modification layer is not enough to achieve effective separation of different types of dyes. The present research designed a "double layer protection" method in order to overcome the above deficiencies. A solution of dopamine (DA) coated carbon nanotubes (CNTs-COOH) was covered on the surface of the polyvinylidene fluoride (PVDF) membrane by deposition, followed by grafting a layer of chitosan (CS) polymer brushes on its surface. The spatial double layer structure provides an excellent barrier effect and effectively reduces the contamination of dyes. When filtering different types of dyes, effective filtration of anionic and cationic dyes through the electrostatic effect of the first layer, the adsorption of CNTs in the second layer and the hydration layer of both layers. All membranes have excellent rejection properties. More importantly, the membranes also had good chemical and mechanical stability and their serviceability was not degraded. Therefore, the prepared PVDF-based multi-layer composite membranes behave a potential application prospect in the wastewater purification field.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2022
·
IF 8.91
Xia Qin,Ziyuan Wang,Chengrui Guo,Rui Guo,Yue Lv,Mingran Li
In this study, Cu-Fe bimetallic magnetic chitosan carbon aerogel catalyst (Cu-Fe@CS) was prepared by the sol-gel method to degrade Fulvic acid (FA) in Fenton-like system. Degradation experiment results showed bimetallic catalyst Cu-Fe@CS can degrade more FA than monometallic catalysts (Cu@CS and Fe@CS) due to the synergistic effect between the copper and iron. Plackett Buiman (PB) design showed that pH and temperature exhibited significant influence on FA degradation. The significant factors were optimized by Central Composite Design (CCD), the results revealed that the maximum FA removal reached 96.59% under the conditions of pH 4.07 and temperature 93.77 °C, the corresponding TOC removal reached 77.7%. The kinetic analysis implied that the reaction followed pseudo-first order kinetic with correlation coefficient (R 2 ) = 0.9939. The Arrhenius fitting analysis revealed that Cu–Fe@CS had a lower activation energy (Ea) than Cu@CS and Fe@CS, meaning that reaction was easier to occur in Fenten-like system with Cu–Fe@CS. Catalyst still remained the higher FA and TOC removals of 96.28% and 77.33% after six runs, respectively. The FA removal was reduced by 65.53% with 12 mmol tertiary butanol (TBA) as scavenger, indicating that •OH played an important role in FA degradation. Finally, the catalytic degradation mechanism was proposed.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2023
·
IF 5.2
Hao Xiong,Hanyou Zhang,Baisheng Sa,Ping Li,Lingyan Lin,Aijun Yang,Jiansheng Li,Jinquan Hong,Linqin Jiang,Yu Qiu
All-inorganic halide perovskite nanocrystals (PNCs) have attracted extensive attention due to their potential for the next-generation displays. The ammonium and halide composition affect strongly the photoelectrical properties and the long-term stability of PNCs. In this work, we present a novel class of mixed all-inorganic (Cs,NH 4 )Pb(Br,X) 3 (X = Cl, Br, I) NCs prepared via cation/anion co-exchange reaction between CsPbBr 3 NCs and the mechanochemically reacted NH 4 Pb n X 2n+1 (X = Cl, Br, I, n = 1 or 2) powders. The cubic morphologies of (Cs,NH 4 )Pb(Br,X) 3 NCs with different halogen element combinations were successfully obtained. In the meanwhile, the extended emission ranges from deep-blue (453 nm) to warm-yellow (564 nm). Higher PLQY and higher stability against ambient air and UV light were achieved simultaneously by controlling the ion co-exchanging process. The photoluminescence quantum yield (PLQY) of (Cs,NH 4 )Pb(Br,X) 3 (X = Cl, Br, I) NCs were also significantly enhanced compared with that of pure CsPbBr 3 after ions exchanging (>85% versus 58%). In addition, the stability of (Cs,NH 4 )Pb(Br,X) 3 (X = Cl, Br, I) NC thin films under the UV-irradiation and in the ambient atmosphere were also dramatically improved. The cation/anion co-exchanging synthetic strategy developed in our research provides a new pathway to modulate and realize mixed-ion PNCs with high optoelectronic performance.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Junxin Zhao,Shichang Liu,Yifang Gao,Maomao Ma,Xianghui Yan,Ding Cheng,Dongman Wan,Zheling Zeng,Ping Yu,Deming Gong
Enzymatic degradation has become the most promising approach to degrading organic ester compounds. In this study, Bacillus licheniformis NCU CS-5 was isolated from the spoilage of Cinnamomum camphora seed kernel, and its extracellular lipase was purified, with a specific activity of 192.98 U/mg. The lipase was found to be a trimeric protein as it showed a single band of 27 kDa in SDS-PAGE and 81 kDa in Native-PAGE. It was active in a wide range of temperatures (5–55 °C) and pH values (6.0–9.0), and the optimal temperature and pH value were 40 °C and 8.0, respectively. The enzyme was active in the presence of various organic solvents, metal ions, inhibitors and surfactants. Both crude and purified lipase retained more than 80% activity after 5 h in the presence of commercial detergents, suggesting its great application potential in detergent industry. The highest activity was found to be towards medium- and long-chain fatty acids (C 6 -C 18 ). Peptide mass spectrometric analysis of the purified lipase showed similarity to the lipase family of B. licheniformis . Furthermore, it degraded more than 90% 2,4-D butyl ester to its hydrolysate 2,4-D within 24 h, indicating that the novel lipase may be applied to degrade organic ester pesticides.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Inorganic Chemistry Frontiers
·
2021
·Vol. 8
·期 24
·5270-5276
·
IF 6.569
Shiwei Liu,Jiale Chen,Hongping Wu,Hongwei Yu,Zhanggui Hu,Jiyang Wang,Yicheng Wu
The dimensional reduction theory is applied to an A2O–P2O5–Bi2O3 system where P2O5 serves as a binary parent while A2O and Bi2O3 are regarded as dimensional reduction agents. Thus, three novel phosphates ACs5Bi4(PO4)2(P2O7)3 (A = K, Rb and Cs) have been prepared through the high-temperature solution method. Single-crystal X-ray diffraction measurements reveal that they all crystallize in the monoclinic space group P21/c (no. 14) and in their structures, two different kinds of P–O units, i.e. isolated PO4 tetrahedra and P2O7 dimers, are interconnected by Bi–O groups to construct a 3∞[Bi4(PO4)2(P2O7)36−] framework. Note that with the change of cationic size in their structures, the Bi3+ cations also exhibit flexible coordination, i.e. BiO5 and BiO6 polyhedra in KCs5Bi4(PO4)2(P2O7)3 and only BiO6 polyhedra in Cs6Bi4(PO4)2(P2O7)3, suggesting that combining the flexible coordination of Bi3+ cations with phosphates based on dimensional reduction theory is an effective strategy to guide the synthesis of new compounds.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Haihua Xu,Sidi Zhu,Mingzhu Xia,Fengyun Wang
The efficient removal of Diclofenac sodium (DCF), a nonsteroidal anti-inflammatory drug, has attracted more and more attention. In this work, ternary core-shell CS@PANI@LDH composite was synthesized via the in-situ growth of Mg/Al layered double hydroxide plates onto polyaniline-wrapped carbon sphere and applied for DCF removal. Various influence factors like concentration, pH, time, temperature, and background electrolytes were systematically investigated. The maximum adsorption capacity was 618.16 mg/g. Besides, after 5 regeneration cycles, CS@PANI@LDH still retained high adsorption capacity. The adsorption mechanism was investigated by Fourier transformed infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) characterization analyses. Simultaneously, the Multiwfn program combined the Chimera program was applied to calculate and visualize the localized orbit locator (LOL) of π electrons in DCF − molecule, which explored the π electronic structure and conjugation characteristics of DCF − molecule. Moreover, the Independent Gradient Model (IGM) analysis based on pro-molecular density revealed the interaction sites and interaction strength between DCF and LDH. The adsorption mechanism could be explained through electrostatic interaction and hydrogen bonding between LDH and DCF, π-π interaction between DCF and PANI. It was the synergistic effects of different interactions that improved the adsorption of DCF by CS@PANI@LDH composite.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Yupeng Xie,Jie Wang,Yaocheng Hu,Jing Zhang,Yong Gao,Haipeng Li,Sheng Wang
The contamination of fission products ( 90 Sr and 137 Cs) on the metallic material (316L stainless steel) of alkaline spent fuel storage pond threatens to decommission nuclear facilities. Compared with previous studies unable to detect Cs on the surface of contaminated steel by laser-induced breakdown spectroscopy (LIBS), this study selected the emission lines of Sr II 407.74 nm and Cs I 455.77 nm as the analytical spectral lines of LIBS, and for the first time satisfactorily measured and analyzed the accumulation of Sr and Cs on the surface of 316L stainless steel for 7, 14, 21, 30 and 60 days, respectively. It was found during the accumulation, the concentration of Sr and Cs on the surface reached their maximum after 21 days, and relatively stabilized 30 days later. In addition, combined with the physicochemical characterizations, the contamination mechanism of Sr and Cs on 316L stainless steel was proposed, with the contaminants gradually diffusing from the oxide layer dissolved and damaged in the alkaline corrosive environment to the matrix. Strontium had two forms on the steel surface: SrCrO 4 in the oxide layer and SrCO 3 in the matrix, but the contamination of Cs was more inclined to the surface than Sr.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Jie-Ping Fan,Jun-Jing Luo,Xue-Hong Zhang,Bing Zhen,Chun-Yi Dong,Yan-Chen Li,Jian Shen,Yu-Tong Cheng,Hui-Ping Chen
In this work, a novel electrospun β-cyclodextrin (β-CD)/chitosan (CS)/polyvinyl alcohol (PVA) nanofiber membrane was prepared to simultaneously and rapidly remove organic and heavy metal micropollutants. The preparation conditions were optimized by multi-objective response surface methodology, and obtained as follows: 100% of the amount of β-CD (relative to PVA), 49.49% of the amount of CS (relative to PVA), 20 cm of the distance between the needle tip and the collector drum, 0.23 mL h −1 of the flow rate of the spinning solution, and 8.72% of the amount of PVA (relative to water). The characterization by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) showed a well cross-linked β-CD/CS/PVA nanofiber membrane was formed. In the static and dynamic adsorption experiments, the results demonstrated that the β-CD/CS/PVA nanofiber membrane was highly efficient in simultaneous and rapid removal of organic and heavy metal micropollutants in water treatment process.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xin Ke,HuiPing Shao,HaiHong Liu,Wengang Liu
In this study, an Fe-La-CS adsorbent with a reticulated structure was prepared by an in situ method, which was able to adsorb arsenate efficiently over a wide pH range of 3–11. The incorporation of iron and lanthanum ions broadened the tolerant pH range of the adsorbent compared with chitosan beads (CS). Arsenic was mainly present in the pH range of 3–9 as two forms, H 2 AsO 4 − and HAsO 4 2− . Calculations using the density-functional theory (DFT) showed that in the Ligand interactions and electrostatic interactions dominate in the pH range, with surface precipitation, and hydrogen bonding interactions playing a facilitating role. The background ions mainly compete with arsenic adsorption for electrostatic interaction sites. However, due to the different valence states of the background ions, the competition intensity is different. Such as low valence state representative ions Na + , K + competitiveness is weak, and arsenic competition adsorption first occupy different adsorption sites, therefore, from the quantum chemistry and molecular dynamics point of view of Na + , K + on arsenic adsorption almost no effect. Cl − , SO4 2− will have some influence on arsenic adsorption because of the same charge with arsenic, but the charged amount is smaller than arsenic and the molecular structure is different from that of arsenic, so the influence is not very big. In summary, the material design of Fe-La-CS adsorbent has great potential and theoretical significance for selective purification of heavy metal wastewater at wide pH.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Muhammad Amin Padhiar,Shaolin Zhang,Fangrong Qin,Minqiang Wang,Yongqiang Ji,Noor Zamin Khan,Nisar Muhammad,Sayed Ali Khan,Jahangeer Ahmed,Shusheng Pan
Lead-free double perovskites (DPs) in the form of two-dimensional (2D) nanosheets (NSs) have emerged as exceptional candidates compared to zero-dimensional (0D) nanocrystals (NCs). This preference is attributed to their intriguing fundamental properties and promising applications in optoelectronics. Notably, NSs offer superior performance due to their enhanced surface passivation capabilities, facilitating more efficient treatment of surface defects and thereby enhancing optoelectronic properties. However, the realization of Cs 2 NaInCl 6 as lead-free DPs NSs is yet to be achieved. In this study, we successfully synthesized Cs 2 NaInCl 6 co-doped with Bi 3+ /Mn 2+ NSs. The two-step solution process synthesis enables us to achieve dimensionality control, progressing from 0D NCs to 2D NSs. Comprehensive optical spectroscopy analyses reveal that the NSs exhibit a suppressed non-radiative decay rate ( Knr ) of 5.03 × 10 −3 ns −1 in contrast to NCs with a Knr of 3.21 × 10 −2 ns −1 . This observation is indicative of a well-passivated surface in NSs. In contrast, NSs with identical composition and surface morphology significantly enhance the photoluminescence quantum yields (PLQYs) up to 73%, which represents the highest PLQYs recorded in Cs 2 NaInCl 6 DPs to the best of our knowledge. Beyond fundamental investigations, the study explores the practical applications of these NSs as anti-counterfeit marks created on a flexible substrate, demonstrating robust emission under UV light. Additionally, the fabrication and testing of a light-emitting diode (LED) showcase the versatility of these NSs in optoelectronic devices. This comprehensive exploration of the optical, morphological, and application aspects of Cs₂NaInCl₆ doped with Bi³⁺/Mn 2 ⁺ NSs contributes valuable insights to the evolving landscape of lead-free perovskite materials, highlighting their potential for diverse technological applications.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Qiaoyu Zhang,Chengcheng Chen,Fangting Liu,Zhengguo Zhang,Xiaoming Fang,Qiong Liu
The in-situ photocatalytic selective reduction of O 2 to produce H 2 O 2 is a promising green and sustainable production technique. However, it faces significant challenges due to the high reaction energy barrier of the H 2 O oxidation half-reaction, which inhibits the reaction and leads to undesirable oxidative by-products. In this study, we have the first time developed a O/Cs dual-functional carbon nitride material for the simultaneous photocatalytic reduction of O 2 to synthesize H 2 O 2 and the selective oxidation of xylose to produce xylonic acid. The CN-O/Cs material exhibits excellent photocatalytic activity for H 2 O 2 production at 820.6 μmolh −1 (41.03 mmolh -1 g −1 ), while achieving a xylose oxidation rate of 359.5 μmolh −1 to xylonic acid, surpassing most reported catalytic systems and enabling biomass upgrading. It is elucidated that the introduction of Cs atoms serves as new reduction active sites, significantly enhancing the adsorption of O 2 with the transitioning Pauling type adsorption configuration. And the Cs atoms facilitate the deprotonation capability of H 2 O to form the crucial *OOH while lowering the reaction energy barrier. The presence of oxygen atoms plays a role in redistribution of electron density, and promotes the selective oxidation of the aldehyde group at the edge of xylose. The synergistic functionalities of Cs and O atoms enable the efficient utilization of electron-hole pairs for the simultaneous synthesis of H 2 O 2 and xylonic acid. This study demonstrates that the rational design of multifunctional tandem sites materials at the atomic scale for the synergistic synthesis of H 2 O 2 and selective oxidation of biomass holds promising prospects.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 191
·期 9
·1-13
·
IF 5.3
Li Yilong,Hang Yuteng,Gopali Rusha,Xu Xinxin,Chen Guanhua,Guan Xiaorong,Bao Ning,Liu Yang
Screen-printed carbon electrodes (SPCE) functionalized with MXene-based three-dimensional nanomaterials are reported for rapid determination of creatinine. Ti 3 C 2 T X MXene with in situ reduced AuNPs (MXene@AuNP) were used as a coreactant accelerator for efficient immobilization of enzymes. Creatinine could be oxidized by chitosan-embedded creatinine amidohydrolase, creatine amidinohydrolase, or sarcosine oxidase to generate H 2 O 2 , which could be electrochemically detected enhanced by Prussian blue (PB). The enzyme@CS/PB/MXene@AuNP/SPCE detected creatinine within the range 0.03–4.0 mM, with a limit of detection of 0.01 mM, with an average recovery of 96.8–103.7%. This indicates that the proposed biosensor is capable of detecting creatinine in a short amount of time (4 min) within a ± 5% percentage error, in contrast with the standard clinical colorimetric method. With this approach, reproducible and stable electrochemical responses could be achieved for determination of creatinine in serum, urine, or saliva. These results demonstrated its potential for deployment in resource-limited settings for early diagnosis and tracking the progression of chronic kidney disease (CKD). Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）